Authentication Box Blank Whenever Username and Password is needed

I have an issue on one of my newer 10.6.8 Intel iMac's. Whenever needed to authenticate for install or to change settings the authentication dialogue box comes up blank, no labels for username and password and any input typed does not show up.

Well I just finally reinstalled the OS and it appears that everything now works great!!

Similar Messages

I reset a Linksys extender, when I try to navigate Safari using The Linksys network, a Box askin for username And password pops out. What is this about?

I reset a Linksys extender, when I try to navigate Safari using The Linksys network, a Box askin for username And password pops out. What is this about?

Ask Linksys. If you reset the extender it presumably lost the username and password it was supposed to service. I'd just supply the name and password and move on.

Psconsole Authentication Failed, Please reenter username and password

Hi,
I have JES5 installed ( App server + Directory server + Portal server + Access manager) on a windows 2003 server with Oracle 10g. After the installation i was able to access the amconsole, psconsole, and the admin console without any errors.
After the server was restarted, i started the application server and the directory server (dsadm start) and now i can login to admin console and /amconsle and also to the /portal/dt, but i am not able to login to /psconsole.
i have used the default login details(amadmin) login for both the /amconsole and the /psconsle, /amconsole logins sucessfully but /psconsole gives me the error "Authentication Failed, Please reenter username and password"
the log details of portal.admin.console.0.0.log are:
[#|2008-01-08T12:13:58.672+0530|SEVERE|SJS Portal Server|debug.com.sun.portal.admin.console|ThreadID=21; ClassName=com.sun.portal.admin.console.common.PSBaseBean; MethodName=log; |Failed to authenticate with JMX Server: LoginBean.login()
javax.management.remote.JMXProviderException: Connection refused: connect
     at com.sun.cacao.agent.impl.CacaoJmxConnectorProvider.newJMXConnector(CacaoJmxConnectorProvider.java:388)
     at javax.management.remote.JMXConnectorFactory.getConnectorAsService(JMXConnectorFactory.java:415)
     at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:307)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
     at com.sun.portal.admin.common.util.AdminUtil.getConnector(AdminUtil.java:813)
     at com.sun.portal.admin.common.util.AdminClientUtil.getJMXConnector(AdminClientUtil.java:113)
     at com.sun.portal.admin.common.util.AdminClientUtil.getJMXConnector(AdminClientUtil.java:139)
     at com.sun.portal.admin.common.util.AdminClientUtil.getJMXConnector(AdminClientUtil.java:163)
     at com.sun.portal.admin.console.common.LoginBean.JMXConnect(LoginBean.java:287)
     at com.sun.portal.admin.console.common.LoginBean.authenticate(LoginBean.java:256)
     at com.sun.portal.admin.console.common.LoginBean.login(LoginBean.java:230)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:146)
     at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:92)
     at javax.faces.component.UICommand.broadcast(UICommand.java:332)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:287)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:401)
     at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:95)
     at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:245)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:110)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:213)
     at sun.reflect.GeneratedMethodAccessor139.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at com.sun.web.ui.util.UploadFilter.doFilter(UploadFilter.java:203)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
     at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
     at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
     at java.security.AccessController.doPrivileged(Native Method)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
     at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:235)
     at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2114)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:516)
     at java.net.Socket.connect(Socket.java:466)
     at java.net.Socket.<init>(Socket.java:366)
     at java.net.Socket.<init>(Socket.java:179)
     at com.sun.jmx.remote.socket.SocketConnection.connect(SocketConnection.java:94)
     at com.sun.jmx.remote.generic.ClientSynchroMessageConnectionImpl.connect(ClientSynchroMessageConnectionImpl.java:69)
     at javax.management.remote.generic.GenericConnector.connect(GenericConnector.java:177)
     at javax.management.remote.jmxmp.JMXMPConnector.connect(JMXMPConnector.java:119)
     at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
     at com.sun.cacao.agent.JmxClient.getUnknownJmxClientConnection(JmxClient.java:904)
     at com.sun.cacao.agent.impl.CacaoJmxConnectorProvider.newJMXConnector(CacaoJmxConnectorProvider.java:362)
     ... 52 more
Also, when i try to start the cacaoadm or check for the status i get the Perl lib version (v5.8.3) doesn't match executable version (v5.8.8) error.
i have JES5 and Oracle 10G installed on a windows 2003 server,
can you please let me know what do i have to correct here.
C:\Program Files\Sun\JavaES5\share\cacao_2\bin>cacaoadm.bat status
Perl lib version (v5.8.3) doesn't match executable version (v5.8.8) at E:\oracle
\product\10.2.0\db_1\perl\5.8.3\lib/MSWin32-x86-multi-thread/Config.pm line 32.
Compilation failed in require at E:\oracle\product\10.2.0\db_1\perl\5.8.3\lib/Fi
ndBin.pm line 97.
BEGIN failed--compilation aborted at E:\oracle\product\10.2.0\db_1\perl\5.8.3\li
b/FindBin.pm line 97.
Compilation failed in require at C:\PROGRA~1\Sun\JavaES5\share\cacao_2\lib\tools
\scripts\cacaoadm.pl line 17.
BEGIN failed--compilation aborted at C:\PROGRA~1\Sun\JavaES5\share\cacao_2\lib\t
ools\scripts\cacaoadm.pl line 17.
Thanks in advance
Regards
Gani

Hi,
depending on the cacao version used. The only authorized user (user allowed to use cacao) may be a privileged user (user part of local administrator group).
to know the version of cacao just run "cacaoadm -V" .
from 2.1 , non privileged user can install their own copy of cacao.
Your case (login on pconsole failing) may be a credential
probleme. did you check the password given for the connection ?
For the service part (enabling cacao) you must not touch the configuration. Everything is done using the command line.
you should not modify information set in the service manager.
just use the command line "cacaoadm enable -f <password file>". the Password file must contain the password of the Administrator who installed cacao.
hope this helps

I get the following message when I try to access my home banking account: Please match the requested format. There is also a red box around the Username and Password entry boxes.

I am using Mozilla Firefox 4.0 Beta 12 and Window XP OS

Hello Oddsbodkin,
It looks like the creator of Netflix Desktop has a site for the project here:
https://answers.launchpad.net/netflix-desktop/
I would try posting your question there and see if anyone else has encountered this error and has a solution.
Cheers, Patrick

Claims Based Authentication SPSecurityTokenService.Issue() failed: The security token username and password could not be validated.

Please excuse the lousy table...Its late :-)
I have a multi-server SP2010 farm. Patched up to
Configuration database version: 14.0.6106.5002
My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configured the servers exactly to MSDN and technet specs (following this spec to the
letter (
http://technet.microsoft.com/en-us/library/ee806882.aspx) to allow the forms side of the web app to authenticate to ADAM.
IT WORKS IN DEV!!! , which is a single server farm. However, it does not work in production. I get the following:
Claims Auth log entries:
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
f2ut
Verbose
Authenticated with login provider. Validating request security token.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Using membership provider 'ADAMProvider'.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Doing password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Failed password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Unexpected
Password check on '[email protected]' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security
token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
fo1t
Monitorable
SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password
could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
fsq7
High
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
  at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
8306
Critical
An exception occurred when trying to issue security token: The security token username and password could not be validated..
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
f2un
Verbose
Form authentication failed.
I have tried EVERYTHING (well, nt everything, I don’t have the fix I suppose).
I found plenty out there and nothing directly correlates with this issue.
I searched on all parts of the errors I got.
This contains an interesting blurb about setting up access for the apppool id correctly.
That’s not the case for me. It works in dev and the same id are used there.
http://sharepoint-2010-world.blogspot.com/2011/03/adam-forms-based-authentication-in.html
This was good but it doesn’t give specs on what the environment looks like:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/557143a6-4b36-4939-bb7f-d62a9335fd18
The was interesting…but I am patched up beyond the June 2011 CU so it’s a moot point:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/9b8368ef-c5e5-4ead-b348-7b2b5587cfc8
Any and all help would be greatly appreciated!

Hi.
You say its a multiserver farm, do you have more than one web server then?
If thats the case, have you tried accessing the site on each server directly?
Found this for you, maybe that can help?
Troubleshooting Exceptions: System.ServiceModel.FaultException`1
http://msdn.microsoft.com/en-us/library/bb907220.aspx
and this:
SharePoint 2010 Claims Authentication - The security token username and password could not be validated reoccurring every morning
http://social.technet.microsoft.com/Forums/pl-PL/sharepoint2010setup/thread/383f1f9b-5c4a-4e19-b770-2a54b7ab1ca1
and
This seems to be a good guide:
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
Good luck
Thomas Balkeståhl - Technical Specialist - SharePoint - http://blksthl.wordpress.com

SharePoint 2010 Word, Excel Office Docs keep prompting for Username and Password

Users access SharePoint externally. They have the URL in their IE Intranet zone. They can login and browse OK but when they click a Word, Excel or Office document they get prompted for Windows Username and Password. This works but is never saved, so every
time they try to open a Word Document they get a blank Windows Username and Password prompt.
I have tried every suggestion I can find but nothing works

Hi BayTree,
Thanks for the sharing and have a nice day.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

My iphone sorry, I restore my iphone ask Apple ID username and password? I entered, it can not reported to unlock my ID. I used iforgot the ID is not changed. I have icloud how active threads. I used ios 7.0.6. thank

restore my iphone, iphone Apple ID requirements? but not to open it. I use iforgot ID. not be. I did not change the username and password. i need help. I used ios 7.0.6. thank

Hi tuyet nhu nguyen,
Given that you recently restored your iPhone, it sounds like you may be having issues with iOS Activation Lock. You may find the following articles helpful:
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/ht5818
Regards,
- Brenden

How set UserName and Password for HTTP Basic Authentication for a servlet

Hi..
How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server?
Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml).
But i dont know how do it in JBOSS..
I am using Netbeans and Eclipse IDEs.. Can we do it by using them also!?
Thank u

Hi Raj,
You can do this by creating a Login screen for the users and check the authentication of each user in PAI i.e. PROCESS AFTER INPUT.
Store the user information in a database table and check the username and password when the user enters it.
You can display password as *** also. For this double click on input box designed for password and goto Display tab. Select Invisible in the list and check it.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN <fcode for submit>.
      SELECT SINGLE uname pwd
       FROM <DB table>
       INTO (user, pass)
       WHERE username = user AND
               password = passwd.
      IF sy-subrc = 0.
<Go to next screen for further processing>
      ELSE.
<Display Error message and exit>
      ENDIF.
ENDCASE.
Regards,
Amit
Message was edited by:
        Amit Kumar

I have AirPrint on my Ipad...when I try to printected my printer, a box comes up asking for username and password. What do I do?

I have AirPrint on my Ipad...when I try to print, a box opens and wants username and password. HELP!!

What is the content of the target field of that shortcut if you open the properties via the right-click context menu?

OSB 11g - Authentication - Username and password in SOAP body

Hi,
I have a PS based on the WSDL provided by the client. According to the WSDL the client will send the username and password (to be used for authentication) in SOAP Body. I have extract the username and password from the body and authenticate it and then only process the data.
The approach I am thinking of is to create two PS. The first PS will be called by client to send the data. There will be no authentication required for this PS. Once this PS (PS-1) receives the message it will extract the username, password and data from the SOAP body. It will then set the username and password in the HTTP header of the second PS (PS-2) and the data in the SOAP body of PS-2.
PS-2 will be under basic authentication. PS-2 will accept the data as the only payload. Upon receiving the data it will do the normal processing.
But I do not see any way to set the HTTP header (Authorization) for the second PS. Is my approach correct? Is there another/better approach?
I went through this link [http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/security/model.html] and found that we may have to configure another Authentication provider. How to do that?
Thanks,
Sanjay

Hi Sanjay,
Your approach seems correct to me (using two proxies) but instead of setting the username and password in HTTP header, you may set it as SOAP header and use Custom Authentication method in OSB. To know more about it, please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/message_level_cust_auth.htm#i1069719
Regards,
Anuj

No cursor on any website, and boxes are too small to type username and password. Example I can't type username and password for yahoo e-mail

Example of no cursor. Any website, such as youtube, there is no cursor in the box, and there are no letters when I type, but the system recognizes what I type. As for e-mail, hotmail works o.k., but with yahoo the boxes for username and password are too small, there is no cursor and I can't type anything. With gmail, there is no cursor, but I can type my username and password.

Try:
iOS: Troubleshooting FaceTime and iMessage activation

Username and Password authentication

Hi,
I am new to both JDBC and MSSQL. I've been connecting to msSQL server without providing username and password (DriverManager.getConnection(String url)). I am wondering how to enforce the username and password authentication so that username and password have to be verified before a connection is made. Thanks in advance.

but where can I get the username & password? I can get
the connection even with any username & password, why?Hi WeiHang,
This is regarding the options you have set in the SQL Server. You have to choose from Windows NT authentication and SQL Server Authentication. If you give SQL Server authentication you have mentioned the username and password and you can connect to database simple using DSN(if you are using JDBC-ODBC). However if you choose WindowsNT authentication you donot specify the user name and password there and you have to enter the same at runtime.
Hope this can help you

Configuring Basic Authentication with Username and password on BizTalk Schema Service

Hi,
I have published my schema as a webservice with WCF-BASICHTTP adapter in IIS 8.0.
I wanted to have a Basic Authentication(User name and password restriction).
I made the Receive location with Security mode as Transport and Transport Client Crediential Type as Basic.
I also set the Service in IIS with Basic Authentication only enabled.
But I don't know how to provide a UserName and Password Authentication.
Please provide your suggestions
Regards, Vignesh S

Hi,
Try & go through the below MSDN link as it explains configuring WCF BasicHttp adapter very well.
http://msdn.microsoft.com/en-us/library/bb246064(v=bts.80).aspx
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question

Outlook 2013 - Exchange 2013 - Prompts for username and password when EWS basic authentication is enabled

So we have an Exchange 2013 environment, and a CRM solution that requires basic authentication to EWS internally. Problem is, after a reboot of our Exchange server, all of our Outlook clients begin prompting for username and password (which nothing
works) which also starts locking users AD accounts out due to failed login attempts (somehow). If I disabled basic authentication on EWS, Outlook authenticates as normal using NTLM and there are no issues. Once Outlook has authenticated, I can
turn back on basic authentication, and Outlook will be fine until the next time the Exchange server is rebooted.
Any ideas?

Hi,
According to your description, I understand that Outlook client prompted for username and password when Exchange server restart and basic authentication is enabled for EWS.
If I misunderstand your concern, please do not hesitate to let me know.
It’s normal. This caused by the difference between basic authentication and NTML authentication:
Basic, with any version of Outlook prior to 2010, results in a pop up dialog asking for creds. Outlook 2010 makes the 'save this password' actually work, so in an Outlook 2010 or later world, Basic can mean no need to authenticate every time you open/reconnect,
but in all earlier versions, you will have to enter creds every time.
NTLM, when used by a client that is domain joined and logged in with cached creds, results in the client simply sending the cached in creds to the server, resulting in what looks like a pretty seamless single sign on experience. However, if you want to do pre-authentication
at something like TMG, and not let the traffic go all the way to CAS, you need to configure TMG for this.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Connecting Using SSL Authentication Without Username and Password

Hi,
We're on RedHat Linux 4.0 using 10.2.0.3 (server/client). We're trying to figure out a way to connect to the database using instantclient and JDBC-OCI and SSL authentication without using a username or password. According to the documentation this should be possible but no sample code is given.
LD_LIBRARY_PATH is set /opt/app/oracle/product/10.2.0/db_1/lib:/usr/lib:/home/oracle/instantclient where the instantclient was installed from the 10.2.0.1 client software
and we are using JDK version 1.6.0_03.
We're also referencing the following paper:
http://www.oracle.com/technology/tech/java/sqlj_jdbc/pdf/wp-oracle-jdbc_thin_ssl_2007.pdf
We've got our client and server wallets configured and the sample code we tried looks like this:
import java.sql.*;
import java.sql.*;
import java.io.*;
import java.util.*;
import oracle.net.ns.*;
import oracle.net.ano.*;
import oracle.jdbc.*;
import oracle.jdbc.pool.*;
import java.security.*;
import oracle.jdbc.pool.OracleDataSource;
public static void main(String[] argv) throws Exception {
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Security.addProvider(new oracle.security.pki.OraclePKIProvider());
System.setProperty("oracle.net.tns_admin", "/opt/app/oracle/product/10.2.0/db_1/network/admin");
String url = "jdbc:oracle:thin:@orcl";
java.util.Properties props = new java.util.Properties();
props.setProperty("oracle.net.authentication_services","(TCPS)");
props.setProperty("javax.net.ssl.trustStore",
"/opt/app/oracle/product/10.2.0/db_1/admin/wallet/server/cwallet.sso");
props.setProperty("javax.net.ssl.trustStoreType","SSO");
props.setProperty("javax.net.ssl.keyStore", "/opt/app/oracle/product/10.2.0/db_1/admin/wallet/client/cwallet.sso");
props.setProperty("javax.net.ssl.keyStoreType","SSO");
props.put ("oracle.net.ssl_version","3.0");
props.put ("oracle.net.wallet_location", "(SOURCE=(METHOD=file)(METHOD_DATA=(DIRECTORY=/opt/app/oracle/product/10.2.0/db_1/admin/wallet/client)))");
System.out.println("At Here...");
OracleDataSource ods = new OracleDataSource();
//ods.setUser("scott");
//ods.setPassword("tiger");
ods.setURL(url);
ods.setConnectionProperties(props);
System.out.println("At Here1...");
Connection conn = ods.getConnection();
System.out.println("At Here2...");
Statement stmt = conn.createStatement();
ResultSet rset = stmt.executeQuery("select 'Hello Thin driver SSL "
+ "tester ' from dual");
while (rset.next())
System.out.println(rset.getString(1));
rset.close();
stmt.close();
conn.close();
When this code is compiled and run, the following error is thrown:
Exception in thread "main" java.sql.SQLException: invalid arguments in call
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
If a username and password is supplied, the code works. So does anyone have a working of using SSL to authenticate without supplying username/password?
Thanks
mohammed

Hi,
I just solved this. I noticed from another thread that I was not using the OCI driver (see below):
String url = "jdbc:oracle:thin:@pki14";
Once I changed it to:
String url = "jdbc:oracle:oci:@pki14";
The code worked perfectly. One more setting that you'll have to do is to create the user you want to connect as externally:
create user scott identified externally as
'CN=acme, OU=development, O=acme, C=US';
grant connect,create session to scott;
Note that the DN should be the same as the SSL certificate that you created in your wallet.
hth
mohammed

Authentication Box Blank Whenever Username and Password is needed

Similar Messages

Maybe you are looking for