Authentication error while creating directory server through dscc

Hi
I am getting authentication error while creating a DS from dscc on windows box on a linux RHEL4 server.However I do not get an authentication issue when creating a ds on solaris box from same dscc.
Can someone guide me what might be the issue?
Thanks
Aarti

Hi,
Please check there is no firewall issue between your windows client to Linux directory server. You may be able to login via dscc but when you create DS instance, your dscc agent port might be an issue not able to talk to Directory server because of firewall.

Similar Messages

  • Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

    I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
    Error (610)
    Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
    Recommended Action
    Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
    My Template does not have the Product Key defined.  The OS is Windows Server 2008 SP2 32-BIT.  Is defining Product Key absolutely necessary?  I have other Templates for other Operating Systems and they are working fine.  Only facing problem
    with this.
    Any help would be appreciated.

    In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
    The OS profile is required to have a product key.  A MAC activation key at the minimum.  But the key is required.
    If you deploy a VM from a VHD, the same customization assumptions are not at play.  Which is why it succeeds.  (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
    SCVMM has rules.  And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.

  • *Error while creating Trave Requset through ESS*

    Hi,
    We are getting following error while creating request through ESS:
    Entry not found in table T706V. Argument: 40P IN 0010120090608
    The estimated travel amounts could not be determined
    Errors have been discovered when checking the Expense Report. Please correct them in order to proceed.
    Whereas we have already maintained entries in the same table.
    Please reply urgently...
    Thanks
    Neha

    Hello,
    The solution is documented in Travel Wiki:
    https://wiki.sdn.sap.com/wiki/display/ERPHCM/Entrynotfoundintable+T706V
    Regards,
    Raynard
    Edited by: Raynard Coscolluela on May 8, 2009 10:53 AM

  • Geting error while creating a dir through CREATE DIRECTORY command

    Hi Gurus,
    When I'm trying to create a dir through this command with logged in as SYS
    CREATE DIRECTORY pump_dir AS 'd:\temp\pump_dir';
    I'm getting the error
    Error starting at line 1 in command:
    CREATE DIRECTORY pump_dir AS 'd:\temp\pump_dir'
    Error at Command Line:1 Column:18
    Error report:
    SQL Error: ORA-00955: name is already used by an existing object
    00955. 00000 - "name is already used by an existing object"
    Any ideas how I can create a dir and grant access to a different user.
    Thanks
    Amitava.

    amitavachatterjee1975 wrote:
    I checked and there is no such directory. I guess it is not that simple, the error I mean.Actually it is , please see,
    ORA-00955:     name is already used by an existing object
    Cause:     An attempt was made to create a database object (such as a table, view, cluster, index, or synonym) that already exists. A user's database objects must have distinct names.
    Action:     Enter a unique name for the database object or modify or drop the existing object so it can be reusedSo as Sb mentioned, check that which object is using the same name that you are trying to assign to this directory object and either rename or drop the object if you want to use the same name only. If not, you can always use another distinct name for this directory object .
    Aman....

  • Error while creating job server in BO dataIntegrator in linux

    Hi,
    I have installed BODI in linux(in the directory /opt/app/DataIntegrator), while configuring job server I got the following error.
    Updating the repository <bodi@tdw__Oracle>.  Please wait...
    sh: line 1: 15850 Aborted                 al_engine -Ubodi -Pbodi -Stdw -NORACLE
    -ZMACHINEINFOI/opt/app/DataIntegrator/bin/machine.sql 2>/tmp/al_machine.out.156
    78
    UNABLE to Update the repository <bodi@tdw__Oracle>. Please check the /tmp/al_mac
    hine.out.15678 for more details!
    SNMP is disabled.
    Can anybody help me to debug this.
    Regards,
    Anitha

    Now i can able to login to my weblogic admin console and find that listen address is blank i have given the listen address as localhost now i can able to create the application server connection successfully ...Listen address blank means your server will accept connections on all network addresses i.e. on localhost, on 127.0.0.1 and on IP/Host name of machine
    If you want to access this server from a remote machine as well, then better keep the listen address field as blank OR assign the value of hostname/IP of machine as listen address. In case you set listen address as hostname/IP of machine, server will not listen anymore to localhost or 127.0.0.1
    1)Now iam working in local machine so that i am giving localhost .... In case i doing some bpel work in my local machine and after completing the work if want to move to my server ...do i want to change the connectionand give my server hostname ha?If your BPEL server is a remote server then better create a new connection for that (using listen address and port of that server)
    How to see errors in Admin server log C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\servers\AdminServer\logs ...is it i want to check it here?Yes, you need to check the logs in this directory in file AdminServer.log
    How to check this?Under $Domain_Home/bin (C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\bin), there will be a file setSOADomainEnv.cmd. If you open this file using notepad, you would see a setting like below -
    set DEFAULT_MEM_ARGS=-Xms512m -Xmx768mThis setting defines the heap memory.
    Regards,
    Anuj

  • Getting Error while  creating Integration server Connection ...PLS help me

    Hi everybody,
    While creating the Integration server connection I am getting the below error.
    Please help me to solve it.
    I am using 10.1.3.1 .
    Application Server: OK
    BPEL Process Manager Server: FAILED
    ESB Server: FAILED
    Thanks in advance.
    Ramana

    Now i can able to login to my weblogic admin console and find that listen address is blank i have given the listen address as localhost now i can able to create the application server connection successfully ...Listen address blank means your server will accept connections on all network addresses i.e. on localhost, on 127.0.0.1 and on IP/Host name of machine
    If you want to access this server from a remote machine as well, then better keep the listen address field as blank OR assign the value of hostname/IP of machine as listen address. In case you set listen address as hostname/IP of machine, server will not listen anymore to localhost or 127.0.0.1
    1)Now iam working in local machine so that i am giving localhost .... In case i doing some bpel work in my local machine and after completing the work if want to move to my server ...do i want to change the connectionand give my server hostname ha?If your BPEL server is a remote server then better create a new connection for that (using listen address and port of that server)
    How to see errors in Admin server log C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\servers\AdminServer\logs ...is it i want to check it here?Yes, you need to check the logs in this directory in file AdminServer.log
    How to check this?Under $Domain_Home/bin (C:\Oracle\Middleware\user_projects\domains\Soa_base_domain\bin), there will be a file setSOADomainEnv.cmd. If you open this file using notepad, you would see a setting like below -
    set DEFAULT_MEM_ARGS=-Xms512m -Xmx768mThis setting defines the heap memory.
    Regards,
    Anuj

  • Error while creating Auxiliary database through RMAN on the same host.

    I got the following error while cloning a stand by database through RMAN.
    I got the following error while cloning a stand by database through RMAN.
    [oracle@localhost admin]$ rman auxiliary sys/clonedb@clonedb
    Recovery Manager: Release 11.1.0.6.0 - Production on Mon Sep 19 10:51:48 2011
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00554: initialization of internal recovery manager package failed
    RMAN-04006: error from auxiliary database: ORA-12154: TNS:could not resolve the connect identifier specified
    My LISTENER looks like this:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
    (SID_NAME = ora11g)
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
    (SID_NAME = CLONEDB)
    TNS Names:
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORCL)
    CLONEDB=
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = CLONEDB)
    And SQLNet.ora
    NAMES.DIRECTORY_PATH= (TNSNAMES,HOSTNAME, EZCONNECT)
    Any help would be highly appreciated.
    Thanks,
    -Revku.

    Hello,
    I think there is something wrong with the ")" in the listener.ora : the second SID_DESC is not part of the SID_LIST.
    Instead of
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
    (SID_NAME = ora11g)
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
    (SID_NAME = CLONEDB)
    )It should be :
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
    (SID_NAME = ora11g)
    (SID_DESC =
    (ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_1)
    (SID_NAME = CLONEDB)
    )Hope it will help.
    Regards,
    Sylvie

  • Error while creating virtual server in sunone web server 6.1

    I created virtual server class called vs1 and virtual server called vsr1 under it. I deleted them . now while i am trying to create another virtual server class by setting lisener socket and giving it a name. when i create virtual server class and click ok and then apply to apply changes it gives me error with message:
    File System error: can not open file for reading
    c:/iPlanet/Servers/myservername/[email protected]
    What's the solution ?
    Thanks in Advance,

    Hi..
    Thanks for your reply...
    Executed following command in OVS server..Please find the output of that command..
    [root@IRIMSOVM utils]# ./do_rpc.py https://oracle:[email protected]:8899 echo hello
    echo ['hello'] =>
    success:echo=hello
    [root@IRIMSOVM utils]#
    Thanks...
    YJR

  • Error while creating data server to connect into Hyperion Financial Manag.

    Hi Cezar and others gurus,
    I need some help in the follow issue:
    I imported the technologie HFM (hyperion financial management) and it`s now displayed normally in the Physical and Logical architecture.
    The drivers imported are: HFMdriver.dll
    log4j-1.2.8.jar
    odi_hfm.jar
    odihapp_common.jar
    And also imported the KMs about HFM.
    Everything doing fine but when i try to create a data server into Physical Architecture, and went to test it, two different errors are shown (below).
    i've already read many documentations but they didn't help.
    I have ODI 10.1.3.4.0 and the hyperion server is working fine.
    ODI server, my ODI client and HFM are located in the local machine.
    In the "Topology manager" in "Physical Architecture" under the "Hyperion Financial Management" I try to create "Data Server" and in the definition tab I filled "Name", "Server" (without port), "User", "Password".
    In the JDBC tab I did nothing.
    I go test and the errors appears.
    In the physical schema in the definition tab I cannot fill the items "Application (Catalog)", "Application (Work catalog)" because they don`t have any option and i let them "undefined"
    When i select "Local (no agent)",receive the error:
    Connection failed
    Java.lang.SQLException: Driver must be specified
    java.sql.SQLException: Driver must be specified
         at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
         at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
         at com.sunopsis.graphical.r.or.o(or.java)
         at com.sunopsis.graphical.r.or.r(or.java)
         at com.sunopsis.graphical.r.or.g(or.java)
         at com.sunopsis.graphical.r.or.a(or.java)
         at com.sunopsis.graphical.r.or.a(or.java)
         at com.sunopsis.graphical.r.il.actionPerformed(il.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.Dialog$1.run(Unknown Source)
         at java.awt.Dialog.show(Unknown Source)
         at java.awt.Component.show(Unknown Source)
         at java.awt.Component.setVisible(Unknown Source)
         at com.sunopsis.graphical.r.or.q(or.java)
         at com.sunopsis.graphical.r.or.<init>(or.java)
         at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
         at com.sunopsis.graphical.frame.bn.w(bn.java)
         at com.sunopsis.graphical.frame.bn.d(bn.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener$ReleasedAction.actionPerformed(Unknown Source)
         at javax.swing.SwingUtilities.notifyAction(Unknown Source)
         at javax.swing.JComponent.processKeyBinding(Unknown Source)
         at javax.swing.JComponent.processKeyBindings(Unknown Source)
         at javax.swing.JComponent.processKeyEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
         at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    and when i select a agent created before, i receive:
    Connection failed
    Java.land.Exception
    at com.sunopsis.graphical.r.or.a(or.java)
         at com.sunopsis.graphical.r.or.s(or.java)
         at com.sunopsis.graphical.r.or.g(or.java)
         at com.sunopsis.graphical.r.or.a(or.java)
         at com.sunopsis.graphical.r.or.a(or.java)
         at com.sunopsis.graphical.r.il.actionPerformed(il.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.Dialog$1.run(Unknown Source)
         at java.awt.Dialog.show(Unknown Source)
         at java.awt.Component.show(Unknown Source)
         at java.awt.Component.setVisible(Unknown Source)
         at com.sunopsis.graphical.r.or.q(or.java)
         at com.sunopsis.graphical.r.or.<init>(or.java)
         at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
         at com.sunopsis.graphical.frame.bn.w(bn.java)
         at com.sunopsis.graphical.frame.bn.d(bn.java)
         at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    Some help will be gratefully aprecciated.
    Thanks in advance,
    Best regards,
    Daniel Hein

    Good morning Cts and other gurus,
    Thanks for the answer but i'm still not able to connect to HFM.
    I am getting an error while trying to reverse engineer (this errors is shown at Agent): error ocurred in driver while connecting to HFM [<undefined>] on [apphyp] using user-name [sql_hyp].
    Caused by: com.hyperion.odi.hfm.wrapper.HFMexception: opening HFM application failed. Error code: 0x80046053 [This application is not registered with Hyperion Shared Services. Please contact your administrator]
    You told me that it`s normal the error when i try to test the data server but both Application (catalog) and Application (Work) stay <undefined> and nothing can be select in that section. I guess this should be completed with my existing applications ate HFM.
    Probably, the error mentioned happens because this item "Application" isn`t correct.
    What am i missing?
    Thanks in advance,
    Best regards,
    Daniel Hein

  • Authentication Error while starting managed server ...

              Hi everyone,
              is there anyone to help me in avoiding the SecurityException while starting managed
              server in a cluster. Weblogic version is 6.1.
              I have started the admin server in a cluster and is running fine. Also cluster
              is started successfully.
              When I start managed server appManaged (which is also included in the cluster),
              I get the following error:
              Starting WebLogic Server ....
              Connecting to http://appadmn:7001...
              <Nov 20, 2003 11:05:56 AM EST> <Error> <Configuration Management> <Error connect
              ing to admin server and initializing admin home: admin URL: t3://appadmin:7001
              javax.naming.AuthenticationException. Root exception is java.lang.SecurityExcep
              tion: attempting to add an object which is not an instance of java.security.Prin
              cipal to a Subject's Principal Set
              at javax.security.auth.Subject$SecureSet.add(Subject.java:1098)
              at weblogic.common.internal.BootServicesStub.writeUserInfoToSubject(Boot
              ServicesStub.java:72)
              at weblogic.common.internal.BootServicesStub.authenticate(BootServicesSt
              ub.java:80)
              at weblogic.security.acl.internal.Security.authenticate(Security.java:10
              8)
              at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialConte
              xtFactoryDelegate.java:461)
              at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
              textFactoryDelegate.java:316)
              at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
              tialContextFactoryDelegate.java:288)
              at weblogic.jndi.Environment.getContext(Environment.java:155)
              at weblogic.jndi.Environment.getInitialContext(Environment.java:138)
              at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:951)
              The start script for managed server appManaged is :
              %JAVA_HOME%\bin\java -hotspot -ms64m -ms64m -classpath %CLASSPATH% -Dweblogic.Domain=mydomain
              -Dweblogic.management.server=appadmin:7001 -Dweblogic.Name=appManaged -Dbea.home=%BEA_HOME%
              -Dweblogic.management.username=system -Dweblogic.management.password=weblogic
              -Dweblogic.ProductionModeEnabled=%STARTMODE% -Djava.security.auth.login.config==%
              BEA_HOME%\wlserver6.1\lib\compat.config -Djava.security.policy==%BEA_HOME%\wlserver6.1\lib\weblogic.policy
              -Dweblogic.management.discover=false weblogic.Server
              thanks.
              

    I could see calling to setDomainEnv.cmd script:
    *@REM Call setDomainEnv here.*
    set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
    for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
    call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
    set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
    set SAVE_CLASSPATH=%CLASSPATH%
    But in my environment I do not see these variable set to any, JAVA_HOME, DERBY_CLASSPATH, JAVA_OPTIONS, CLASS_PATH.
    This might be the issue? Or anything else?

  • Help Please !!! Authentication error while starting managed server

    Hi everyone,
    is there anyone to help me in avoiding the SecurityException while starting managed
    server in a cluster. Weblogic version is 6.1.
    I have started the admin server in a cluster and is running fine. Also cluster
    is started successfully.
    When I start managed server appManaged (which is also included in the cluster),
    I get the following error:
    Starting WebLogic Server ....
    Connecting to http://appadmn:7001...
    <Nov 20, 2003 11:05:56 AM EST> <Error> <Configuration Management> <Error connect
    ing to admin server and initializing admin home: admin URL: t3://appadmin:7001
    javax.naming.AuthenticationException. Root exception is java.lang.SecurityExcep
    tion: attempting to add an object which is not an instance of java.security.Prin
    cipal to a Subject's Principal Set
    at javax.security.auth.Subject$SecureSet.add(Subject.java:1098)
    at weblogic.common.internal.BootServicesStub.writeUserInfoToSubject(Boot
    ServicesStub.java:72)
    at weblogic.common.internal.BootServicesStub.authenticate(BootServicesSt
    ub.java:80)
    at weblogic.security.acl.internal.Security.authenticate(Security.java:10
    8)
    at weblogic.jndi.WLInitialContextFactoryDelegate.pushUser(WLInitialConte
    xtFactoryDelegate.java:461)
    at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
    textFactoryDelegate.java:316)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
    tialContextFactoryDelegate.java:288)
    at weblogic.jndi.Environment.getContext(Environment.java:155)
    at weblogic.jndi.Environment.getInitialContext(Environment.java:138)
    at weblogic.management.Admin.initializeRemoteAdminHome(Admin.java:951)
    The start script for managed server appManaged is :
    %JAVA_HOME%\bin\java -hotspot -ms64m -ms64m -classpath %CLASSPATH% -Dweblogic.Domain=mydomain
    -Dweblogic.management.server=appadmin:7001 -Dweblogic.Name=appManaged -Dbea.home=%BEA_HOME%
    -Dweblogic.management.username=system -Dweblogic.management.password=weblogic
    -Dweblogic.ProductionModeEnabled=%STARTMODE% -Djava.security.auth.login.config==%
    BEA_HOME%\wlserver6.1\lib\compat.config -Djava.security.policy==%BEA_HOME%\wlserver6.1\lib\weblogic.policy
    -Dweblogic.management.discover=false weblogic.Server
    thanks.

    I could see calling to setDomainEnv.cmd script:
    *@REM Call setDomainEnv here.*
    set DOMAIN_HOME=D:\Perforce\weblogic1\dev\src_crmod\wls\mytest
    for %%i in ("%DOMAIN_HOME%") do set DOMAIN_HOME=%%~fsi
    call "%DOMAIN_HOME%\bin\setDomainEnv.cmd" %*
    set SAVE_JAVA_OPTIONS=%JAVA_OPTIONS%
    set SAVE_CLASSPATH=%CLASSPATH%
    But in my environment I do not see these variable set to any, JAVA_HOME, DERBY_CLASSPATH, JAVA_OPTIONS, CLASS_PATH.
    This might be the issue? Or anything else?

  • Error while creating Supplier Contact through API

    Hi,
    I am not able to create supplier contact through an API: ap_vendor_pub_pkg.create_vendor_contact
    The return status (x_return_status)from the API is 'U' and x_msg_data is 'FND'.
    Please help with your suggestions !
    Thanks,
    Sambit

    Hi Hussein,
    Yes the only meesage that is coming in the pot parameter of the API is: 'FND'
    The code snippet is as below:
    ===================================================
    fnd_global.apps_initialize(user_id => v_user_id,
    resp_id => v_resp_id,
    resp_appl_id => v_application_id);
    mo_global.set_policy_context(
    'S', v_org_id);
    v_message := v_message || chr(13) || 'Assigning values for the api ';
    v_vendor_contact_rec_type.vendor_site_id := v_vendor_site_id;
    v_vendor_contact_rec_type.vendor_id := v_vendor_id;
    v_vendor_contact_rec_type.person_first_name := v_first_name;
    v_vendor_contact_rec_type.person_last_name := v_last_name;
    v_vendor_contact_rec_type.email_address := '[email protected]';
    v_vendor_contact_rec_type.org_id := v_org_id;
    v_message := v_message || chr(13) ||
    'Before calling AP_VENDOR_PUB_PKG.CREATE_VENDOR_CONTACT api ';
    BEGIN
    ap_vendor_pub_pkg.create_vendor_contact(p_api_version => v_api_version,
    p_init_msg_list => fnd_api.g_false,
    p_commit => fnd_api.g_false,
    p_validation_level => fnd_api.g_valid_level_full,
    x_return_status => v_return_status,
    x_msg_count => v_msg_count,
    x_msg_data => v_msg_data,
    p_vendor_contact_rec => v_vendor_contact_rec_type,
    x_vendor_contact_id => v_vendor_contact_id,
    x_per_party_id => v_per_party_id,
    x_rel_party_id => v_rel_party_id,
    x_rel_id => v_rel_id,
    x_org_contact_id => v_org_contact_id,
    x_party_site_id => v_party_site_id);
    v_message := v_message || chr(13) ||
    'After calling AP_VENDOR_PUB_PKG.CREATE_VENDOR_CONTACT api: '||v_msg_data;
    =========================================================================
    Output: v_msg_data= FND
    Thanks,
    Sambit

  • ORA-12547 error while creating new database through dbca

    i installed oracle 10g R2 on parallels virtuozzo container. (it is a product similar to openvz and solaris containers)
    added: oracle version is 10.2.0.1.0
    the installation goes off without too much fuss but when i try to create a general purpose database through dbca it throws up an error
    ORA-12547 : TNS lost contact
    my listener is up and runing and did stop and restart it. i also created a new listener after deleting the previous one.
    still the error persists.
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=oracle)(PORT=1521)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date                19-MAY-2009 15:39:06
    Uptime                    0 days 0 hr. 55 min. 56 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /export/home/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File         /export/home/oracle/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC0)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
      Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfullyi am running dbca from oracle user only and i did ensure that the contents of the oracle home directory (on which oracle is installed) has permissions of oracle:oinstall.
    i am clueless as to what is causing this error.
    just to add to issues which i faced during installation on virtuozzo containers. containers does not allow me to create a swap space. but i had to ignore the error and go ahead with the installation with most of the steps followed from http://wiki.openvz.org/Oracle_10g_VE.
    please guide
    Edited by: iinfi on May 19, 2009 4:53 PM

    hi all
    virtuozzo during creation of containers doesnt install the following.
    sysstat-5.0.5-1
    libaio-0.3.103-3
    libaio-0.3.103-3 (i386)
    libaio-devel-0.3.103-3
    the oracle documentation tells us to install the following and so i didnt know i had to install other packages as well.
    make-3.79.1
    gcc-3.2.3-34
    glibc-2.3.2-95.20
    compat-db-4.0.14-5
    compat-gcc-7.3-2.96.128
    compat-gcc-c++-7.3-2.96.128
    compat-libstdc++-7.3-2.96.128
    compat-libstdc++-devel-7.3-2.96.128
    openmotif21-2.1.30-8
    setarch-1.3-1
    thanks for your time.

  • Error while creating Apps Server

    Hi there,
    My Platform: Win XP, Oralce10g, BEA WebLogic
    While trying to create the Apps Server with PSADMIN, I encountered some challenges.
    Below are some of the errors I encountered.
    PSADMIN.2784 (0) [01/13/09 05:58:54](0) Begin boot attempt on domain HPRD9
    PSWATCHSRV.2876 (0) [01/13/09 05:59:03] Checking process status every 120 seconds
    PSWATCHSRV.2876 (0) [01/13/09 05:59:03] Server started
    PSAPPSRV.2596 (0) [01/13/09 05:59:04](0) PeopleTools Release 8.49 (WinX86) starting
    PSAPPSRV.2596 (0) [01/13/09 05:59:04](0) Cache Directory being used: E:\PT8.49\appserv\HPRD9\CACHE\PSAPPSRV_2\
    PSAPPSRV.2596 (0) [01/13/09 05:59:04](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HPRD9 with user PS.
    PSAPPSRV.2596 (0) [01/13/09 05:59:04](0) Server failed to start
    PSWATCHSRV.2876 (0) [01/13/09 05:59:05] Shutting down
    PSADMIN.2784 (0) [01/13/09 05:59:11](0) End boot attempt on domain HPRD9
    I need some help. Any assistance please???
    Thanks and regards,
    Texas!

    Hi,
    Now it's not TNS error but SYSADM user ... meanwhile, I can connect to the database with this user id (SYSADM) and the password (SYSADM).
    Below are the error logfiles from my last configuration I tried to make, what could possibly solve this problem please?
    =====
    APPSRV
    =====
    PSADMIN.3164 (0) [01/15/09 14:26:17](0) Begin boot attempt on domain HPRD9
    PSWATCHSRV.1544 (0) [01/15/09 14:26:26] Checking process status every 120 seconds
    PSWATCHSRV.1544 (0) [01/15/09 14:26:26] Server started
    PSAPPSRV.124 (0) [01/15/09 14:26:34](0) PeopleTools Release 8.49 (WinX86) starting
    PSAPPSRV.124 (0) [01/15/09 14:26:35](0) Cache Directory being used: E:\PT8.49\appserv\HPRD9\CACHE\PSAPPSRV_2\
    PSAPPSRV.124 (0) [01/15/09 14:26:36](1) GenMessageBox(0, 0, M): Database Signon: Invalid user ID or password for database signon. (id=SYSADM)
    PSAPPSRV.124 (0) [01/15/09 14:26:36](0) Server failed to start
    PSWATCHSRV.1544 (0) [01/15/09 14:26:36] Shutting down
    PSADMIN.3164 (0) [01/15/09 14:26:42](0) End boot attempt on domain HPRD9
    ======
    TUXLOG
    ======
    142349.TEXASINC!tmadmin.3912.3284.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
    142351.TEXASINC!tmboot.3156.3916.-2: 01-15-2009: Tuxedo Version 9.1, 32-bit
    142351.TEXASINC!tmboot.3156.3916.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 60 seconds
    142351.TEXASINC!tmboot.3156.3916.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
    142353.TEXASINC!BBL.696.688.0: 01-15-2009: Tuxedo Version 9.1, 32-bit, Patch Level 036
    142353.TEXASINC!BBL.696.688.0: LIBTUX_CAT:262: INFO: Standard main starting
    142357.TEXASINC!BBL.696.688.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    142502.TEXASINC!tmloadcf.3316.3296.-2: 01-15-2009: Tuxedo Version 9.1, 32-bit
    142502.TEXASINC!tmloadcf.3316.3296.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1192 512-byte blocks)
    142517.TEXASINC!tmloadcf.3316.3296.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file E:\PT8.49\appserv\HPRD9\PSTUXCFG has been created
    142617.TEXASINC!PSADMIN.3164: Begin  attempt on domain HPRD9
    142619.TEXASINC!tmadmin.2452.1788.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
    142622.TEXASINC!tmboot.1680.2496.-2: 01-15-2009: Tuxedo Version 9.1, 32-bit
    142622.TEXASINC!tmboot.1680.2496.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 60 seconds
    142622.TEXASINC!tmboot.1680.2496.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
    142624.TEXASINC!BBL.3328.1908.0: 01-15-2009: Tuxedo Version 9.1, 32-bit, Patch Level 036
    142624.TEXASINC!BBL.3328.1908.0: LIBTUX_CAT:262: INFO: Standard main starting
    142626.TEXASINC!tmboot.2468.3948.-2: 01-15-2009: Tuxedo Version 9.1, 32-bit
    142626.TEXASINC!tmboot.2468.3948.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 60 seconds
    142626.TEXASINC!tmboot.2468.3948.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
    142626.TEXASINC!PSWATCHSRV.1544.2816.-2: 01-15-2009: Tuxedo Version 9.1, 32-bit
    142626.TEXASINC!PSWATCHSRV.1544.2816.-2: LIBTUX_CAT:262: INFO: Standard main starting
    142634.TEXASINC!PSAPPSRV.124.3536.0: 01-15-2009: Tuxedo Version 9.1, 32-bit
    142634.TEXASINC!PSAPPSRV.124.3536.0: LIBTUX_CAT:262: INFO: Standard main starting
    142636.TEXASINC!PSAPPSRV.124.3536.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
    142636.TEXASINC!tmboot.2468.3948.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
    142639.TEXASINC!BBL.3328.1908.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
    142642.TEXASINC!PSADMIN.3164: End boot attempt on domain HPRD9Thanks and regards,
    Texas!

  • Error While creating Application server connection

    Hi ,
    I am a newbie to SOA suite . I have installed Oracle XE Database , Oracle Jdeveloper 10.1.3.3.0.3 and Oracle SOA Suite 10g (10.1.3.1) ( file name soa_windows_x86_
    101310_disk1.zip) on my windows XP machine
    Now I created a "Hello World Bepel Process '" . For deploying it I was trying to create an application server connection . I am not sure that I need to install anymore things or not .
    Here are the steps which happened while I was trying to make connection to application server.
    1> Connection Name : Gave as "AppServerConnection1"
    Connection Type as "Standalone OC4J 10g 10.1.3"
    2> UserName as : oc4jadmin
    Password : Gave my password
    3> Hostname : localhost
    RMI Port was coming as 23791 as default ( Please note that I checked opmn folder and tried to use the RMI from the xml file too)
    4> While testing I was getting error as "For input string: "23791home"
    Not sure if i need to install anything ( Probably Application Server ) more .
    Please let me know what I need to do and if i need to install anything else where will I find the file ?
    Thanks in advance

    Hi,
    Connection Type as "Standalone OC4J 10g 10.1.3"
    When choosing the connection you need to select the connection as Oracle Application Server 10.1.3 not Standalone OC4J 10g 10.1.3

Maybe you are looking for

  • Can't Update or Delete Itunes 10.1.0.54

    For some reason I can't update Itunes 10.1.0.54 to the latest version.  I get an error that says:    Could not open key:    HKEY_LOCAL_MACHINE\Software\Classes\.mpg\OpenWithProgIds    Verify that you have sufficient access to that key, or contact you

  • Downgrading Timecapsule firmware results in error -9

    I'm using airport utility 6.1 on Windows 7 and I wanted to downgrade to an earlier firmware 7.6 or 7.5.2.  However, everytime I tried to upload the firmware, the airport utility reports and error -9 saying that I might not be connected to the time ca

  • How to make manager approve more than one request in one time in SSHR

    Dear All, Anyone has an idea on how to make manager approver more than one request in one time in SSHR?? for example, manager is having 20 requests to approve on Change Pay Function, he don't want to check one by one and approve it, he want to approv

  • Skype 7.4 has stopped working.

    I have made sure that all my drivers are up to date and that windows is also all up to date. I've uninstalled Skype and rebooted and installed Skype again and nothing seems to work. I'm at a lose as to what to do. Here is my error message: Faulting a

  • Getting my old purchased songs from iTunes on my ipad to my iPhone.

    On my purchased list of songs, there are only three or four songs that have the icloud symbol beside them. So I can't get the other songs onto my iPhone from my ipad. Can anyone help? Thanks