Authentication Fail after Installation
HELP! when all steps finished according to online instruction below, weblogic cannot be started.
http://download-uk.oracle.com/docs/cd/B28196_01/idmanage.1014/b25347/weblogic.htm#WeblogicSSPI
weblogic console shows:
The WebLogic Server did not start up properly.
Reason: weblogic.security.SecurityInitializationException: Authentication for us
er weblogic denied
***************************************************************************
Install network manager if its not already installed, then try:
sudo systemctl disable dhcpcd.service
sudo systemctl enable NetworkManager
And then reboot.
If this does not solve the problem, post the systemd logs.
Last edited by harshsahil48 (2014-02-23 17:55:42)
Similar Messages
-
Toshiba EXCITE Pro - WIFI connection. Authentication failed after update
Hello.
Just received this Tablet.
Everything seemed ok while updating to the latest version (did that first to solve the heat problems).
After the last update *i lost my WIfi connection. Authentication failed* (didnt change something - was connecting - updating ok 1 minute before the last update).
After that i started testing ,Wps connection , No security Wifi etc etc.
*Finally at a random time (and with the initial settings) i got connected*. After i shut down the tablet the same problem occured.
After doing the same things again i finally got connected and this time it seems to be ok, even after i shut down the tablet.
However this is frustrating.
Maybe you have to sort this out?
I have seen and other people returning this tablet after having this problem.
It is not a hardware problem since its working ok before the update.
Of course tried factory reset twice.
Hope i dont have this problem again, *but i am informing in hope that you fix this in a future update.*Toshiba sent me the fix for this. Figured I would use Facebook and they sorted a solution straight away.
It requires a complete reset. Not the soft reset from within Android.
I'll post it here as they will check through moderation I guess.
Thanks for sending a private message Ben. For us to get this resolved for you we would advise to perform a reset from the Android system recovery menu, to do the reset please follow these steps:
The reset process will delete any data, settings, and applications on your tablet. You must have a backup of any data you wish to keep before proceeding.
1. Make sure the tablet is off and not in standby.
2. Hold down the Volume Up and Power buttons simultaneously until the two Android icons appear.
3. Use the volume buttons to select the white box on the right.
4. Once selected, press the power button.
5. Use the volume buttons to select wipe cache partition and then press the power button.
6. Select Yes and press the power button.
7. Use the volume buttons to select wipe data/factory reset and then press the power button.
8. Select Yes and press the power button.
9. The tablet will now reset.
If you have any issues after the reset please get back to us as soon as possible!
Its been working well ever since. I guess the cache clean part might be the main one. You'll have to select the reboot yourself as I did at the end.
Might be best to use Facebook i'll see if I can find my post as the response was quick and efficient unlike their responses in here. I.e nowt from them so far.
They needed my name and serial numbers probably to log problems etc.
Message was edited by: bensimmo -
AFP authentication fails after software updates
Hi,
I'm running a 10.4.7 server configured as an Open Directory Master. It is the only server and is mainly used for AFP and SMB file sharing. (No client shell logins).
For some time now (since 10.4.3) I'm finding that after I apply a Software Update* our AFP users can no longer log in to AppleShare. They can mount the same volumes via SMB, but cannot authenticate via AFP until I have them manually reset their password (even to the old value) in Workgroup Manager.
The ApplePasswordServer.Server.log file shows:
DIGEST-MD5 authentication failed, SASL error -13 (password incorrect)
(It's definitely not a case of mis-typed passwords, as these errors are generated by saved keychain logins...and the same keychain logins work again after the old password has been re-entered again in Workgroup Manager).
Has anybody seen any problems like this before and have any ideas how to fix it?
* I haven't been able to narrow down specifically which types of Software Updates yet.
Mac OS X (10.4.7)
Mac OS X (10.4.3)It is one user per sharepoint for personal directories on the server. Many of the users do have access to various other sharepoints however for common projects, etc.
(None of the share points are in the sub-directories of any other sharepoints either. ie. No sharepoint has an ancestor directory that is also a sharepoint.)
When the problem occurs, all AFP users lose access to all AFP sharepoints however.
The permissions on the sharepoints themselves are ok as:
- users can access the same sharepoint with SMB
- when the user re-enters their password, AFP access is restored, without needing to change the permissions whatsoever.
I hope that is a bit clearer! Appreciate your time in responding. -
802.1x port authentication failing after getting a access-accept packet
Hi all,
Im not 100% sure what the hell is going on here.
Any idea's or help will be appreciated.
Heres the topology.
1 x windows 2012 NPS
1x 3750X
1x Windows 7 x64
data flow
<laptop> - - [gi 1/0/13]<3750X>[gi 1/0/48]- -[gi 5/39]<6513>[po 1] - - [po 4]<6509><5/1> - - <VMWARE>[NPS Server]
The switch that is doing the authentication is the 3750X. Here is the IOS version.
Switch Ports Model SW Version SW Image
* 1 54 WS-C3750X-48 15.2(1)E C3750E-UNIVERSALK9-M
A wireshark trace on the NPS server shows that the packets are arriving and being sent back
Wireshark on a mirror of the trunk port connecting the 6513. It also shows packets being sent and arriving. access-accept packets are being recieved.
As you can see in the debug output, the switch is getting a access-accept, then it is stating a AAA failure.
here is a debug output as you plug in the laptop.
Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
Oct 24 10:53:45.643: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:46.641: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:47.538: dot1x-ev:[Gi1/0/13] Interface state changed to UP
Oct 24 10:53:47.564: dot1x-packet:[6431.500e.9b00, Gi1/0/13] queuing an EAPOL pkt on Auth Q
Oct 24 10:53:47.572: dot1x-ev:DOT1X Supplicant not enabled on GigabitEthernet1/0/13
Oct 24 10:53:47.572: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x1
Oct 24 10:53:47.572: dot1x-packet: length: 0x0000
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 0,TYPE= 0,LEN= 0
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0101.0000
Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Couldn't find the supplicant in the list
Oct 24 10:53:47.572: dot1x-ev:[6431.500e.9b00, Gi1/0/13] New client detected, sending session start event for 6431.500e.9b00
Oct 24 10:53:47.572: AAA/BIND(00000047): Bind i/f
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Sending create new context event to EAP for 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.580: EAP-EVENT: Received context create from LL (Dot1x-Authenticator) (0x15000045)
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received AAA ID 0x00000047 from LL
Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: Assigning AAA ID 0x00000047
Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: CTS not enabled on interface Gi1/0/13
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received Session ID "C0A846660000004700DF6030" from LL
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Setting authentication mode: Passthrough
Oct 24 10:53:47.580: eap_authen : initial state eap_auth_initialize has enter
Oct 24 10:53:47.580: EAP-EVENT: Allocated new EAP context (handle = 0xE8000047)
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Created a client entry (0x15000045)
Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Dot1x authentication started for 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.580: %AUTHMGR-5-START: Starting 'dot1x' for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.580: EAP-EVENT: Received EAP event 'EAP_AUTHENTICATOR_START' on handle 0xE8000047
Oct 24 10:53:47.580: eap_authen : during state eap_auth_initialize, got event 25(eapStartTmo)
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_initialize -> eap_auth_select_action
Oct 24 10:53:47.580: eap_authen : during state eap_auth_select_action, got event 20(eapDecisionPropose)
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_select_action -> eap_auth_propose_method
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_propose_method
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_propose_method -> eap_auth_method_request
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_method_request
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_method_request -> eap_auth_tx_packet
Oct 24 10:53:47.580: EAP-AUTH-EVENT: Current method = Identity
Oct 24 10:53:47.580: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_ID_REQUEST' on handle 0xE8000047
Oct 24 10:53:47.580: eap_authen : idle during state eap_auth_tx_packet
Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_tx_packet -> eap_auth_idle
Oct 24 10:53:47.589: EAP-AUTH-TX-PAK: Code:REQUEST ID:0x1 Length:0x0005 Type:IDENTITY
Oct 24 10:53:47.589: EAP-EVENT: Started 'Authenticator ReqId Retransmit' timer (30s) for EAP sesion handle 0xE8000047
Oct 24 10:53:47.589: EAP-EVENT: Started EAP tick timer
Oct 24 10:53:47.589: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_TX_PACKET' on handle 0xE8000047
Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
Oct 24 10:53:47.597: dot1x-packet:EAPOL pak Tx - Ver: 0x3 type: 0x0
Oct 24 10:53:47.597: dot1x-packet: length: 0x0005
Oct 24 10:53:47.597: dot1x-packet:EAP code: 0x1 id: 0x1 length: 0x0005
Oct 24 10:53:47.597: dot1x-packet: type: 0x1
Oct 24 10:53:47.597: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL packet sent to client 0x15000045
Oct 24 10:53:47.606: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Queuing an EAPOL pkt on Authenticator Q
Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x0
Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 2,TYPE= 1,LEN= 31
Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0100.001f
Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1 type: 0x0
Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
Oct 24 10:53:47.606: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Response sent to the server from 0x15000045
Oct 24 10:53:47.606: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_RX_PACKET' on handle 0xE8000047
Oct 24 10:53:47.606: EAP-AUTH-RX-PAK: Code:RESPONSE ID:0x1 Length:0x001F Type:IDENTITY
Oct 24 10:53:47.606: Payload: 47454E4552414C5C72616E64792E636F ...
Oct 24 10:53:47.606: eap_authen : during state eap_auth_idle, got event 1(eapRxPacket)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_idle -> eap_auth_received
Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response received by context 0xE8000047
Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response type = Identity
Oct 24 10:53:47.606: EAP-EVENT: Stopping 'Authenticator ReqId Retransmit' timer for EAP sesion handle 0xE8000047
Oct 24 10:53:47.606: eap_authen : during state eap_auth_received, got event 10(eapMethodData)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_received -> eap_auth_method_response
Oct 24 10:53:47.606: EAP-AUTH-EVENT: Received peer identity: GENERAL\randy.coburn.admin
Oct 24 10:53:47.606: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_IDENTITY' on handle 0xE8000047
Oct 24 10:53:47.606: eap_authen : during state eap_auth_method_response, got event 13(eapMethodEnd)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_method_response -> eap_auth_select_action
Oct 24 10:53:47.606: eap_authen : during state eap_auth_select_action, got event 19(eapDecisionPass)
Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_select_action -> eap_auth_passthru_init
Oct 24 10:53:47.606: eap_authen : during state eap_auth_passthru_init, got event 22(eapPthruIdentity)
Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_passthru_init -> eap_auth_aaa_req
Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_GET_PEER_MAC_ADDRESS' on handle 0xE8000047
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding Audit-Session-ID "C0A846660000004700DF6030" to RADIUS Req
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added Audit-Session-ID
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding IDB "0x070B90F8" to RADIUS Req
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added IDB
Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_AAA_REQUEST' on handle 0xE8000047
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: eap_auth_aaa_authen_request_shim aaa_service 19, eap aaa_list handle 0, mlist handle 0
Oct 24 10:53:47.614: AAA/AUTHEN/8021X (00000000): Pick method list 'default'
Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Request sent successfully
Oct 24 10:53:47.614: eap_authen : during state eap_auth_aaa_req, got event 24(eapAAAReqOk)
Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_aaa_req -> eap_auth_aaa_idle
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute hwidb
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-type
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-service
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute clid-mac-addr
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute target-scope
Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-unique-id
Oct 24 10:53:47.614: RADIUS(00000000): Config NAS IP: 0.0.0.0
Oct 24 10:53:47.614: RADIUS(00000000): sending
Oct 24 10:53:47.614: RADIUS/ENCODE: Best Local IP-Address 192.168.70.102 for Radius-Server 192.168.19.121
Oct 24 10:53:47.614: RADIUS(00000000): Send Access-Request to 192.168.19.121:1645 id 1645/21, len 288
Oct 24 10:53:47.614: RADIUS: authenticator F1 BA E5 31 71 54 BF 1A - A2 B1 5E 1A 63 72 1E 72
Oct 24 10:53:47.614: RADIUS: User-Name [1] 28 "GENERAL\randy.coburn.admin"
Oct 24 10:53:47.614: RADIUS: Service-Type [6] 6 Framed [2]
Oct 24 10:53:47.614: RADIUS: Vendor, Cisco [26] 27
Oct 24 10:53:47.614: RADIUS: Cisco AVpair [1] 21 "service-type=Framed"
Oct 24 10:53:47.614: RADIUS: Framed-MTU [12] 6 1500
Oct 24 10:53:47.614: RADIUS: Called-Station-Id [30] 19 "AC-F2-C5-75-7D-0D"
Oct 24 10:53:47.614: RADIUS: Calling-Station-Id [31] 19 "64-31-50-0E-9B-00"
Oct 24 10:53:47.614: RADIUS: EAP-Message [79] 33
Oct 24 10:53:47.614: RADIUS: 02 01 00 1F 01 47 45 4E 45 52 41 4C 5C 72 61 6E 64 79 2E 63 6F [GENERAL\randy.co]
Oct 24 10:53:47.622: RADIUS: 62 75 72 6E 2E 61 64 6D 69 6E [ burn.admin]
Oct 24 10:53:47.622: RADIUS: Message-Authenticato[80] 18
Oct 24 10:53:47.622: RADIUS: EE 52 4D ED B9 06 F3 CE 63 AC 9D 73 24 1B A7 ED [ RMcs$]
Oct 24 10:53:47.622: RADIUS: EAP-Key-Name [102] 2 *
Oct 24 10:53:47.622: RADIUS: Vendor, Cisco [26] 49
Oct 24 10:53:47.622: RADIUS: Cisco AVpair [1] 43 "audit-session-id=C0A846660000004700DF6030"
Oct 24 10:53:47.622: RADIUS: Vendor, Cisco [26] 20
Oct 24 10:53:47.622: RADIUS: Cisco AVpair [1] 14 "method=dot1x"
Oct 24 10:53:47.622: RADIUS: NAS-IP-Address [4] 6 192.168.70.102
Oct 24 10:53:47.622: RADIUS: NAS-Port [5] 6 60000
Oct 24 10:53:47.622: RADIUS: NAS-Port-Id [87] 23 "GigabitEthernet1/0/13"
Oct 24 10:53:47.622: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
Oct 24 10:53:47.622: RADIUS(00000000): Sending a IPv4 Radius Packet
Oct 24 10:53:47.622: RADIUS(00000000): Started 10 sec timeout
Oct 24 10:53:47.622: RADIUS: Received from id 1645/21 192.168.19.121:1645, Access-Accept, len 66
Oct 24 10:53:47.622: RADIUS: authenticator 92 F6 07 AF C1 AB 0B 4C - 1D 9E A0 D1 01 36 27 26
Oct 24 10:53:47.622: RADIUS: Class [25] 46
Oct 24 10:53:47.622: RADIUS: 76 E3 06 66 00 00 01 37 00 01 02 00 C0 A8 13 79 00 00 00 00 00 00 00 00 00 00 00 00 01 CE CF F8 1F 7B 75 41 00 00 00 00 00 00 00 50 [ vf7y{uAP]
Oct 24 10:53:47.622: RADIUS(00000000): Received from id 1645/21
Oct 24 10:53:47.622: EAP-EVENT: eap_aaa_reply
Oct 24 10:53:47.622: EAP-AUTH-AAA-EVENT: Reply received session_label 72000033
Oct 24 10:53:47.622: EAP-EVENT: Received AAA event 'EAP_AAA_FAIL' on handle 0xE8000047
Oct 24 10:53:47.622: eap_authen : during state eap_auth_aaa_idle, got event 8(eapAAAFail)
Oct 24 10:53:47.622: @@@ eap_authen : eap_auth_aaa_idle -> eap_auth_failure
Oct 24 10:53:47.631: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
Oct 24 10:53:47.631: EAP-AUTH-TX-PAK: Code:FAILURE ID:0x1 Length:0x0004
Oct 24 10:53:47.631: EAP-AUTH-EVENT: FAIL for EAP method ID: 1, name: , on handle 0xE8000047
Oct 24 10:53:47.631: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_FAIL' on handle 0xE8000047
Oct 24 10:53:47.631: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Received an EAP Fail
Oct 24 10:53:47.639: %DOT1X-5-FAIL: Authentication failed for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Added username in dot1x
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Dot1x did not receive any key data
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Processing client delete for hdl 0x15000045 sent by Auth Mgr
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] 6431.500e.9b00: sending canned failure due to method termination
Oct 24 10:53:47.639: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
Oct 24 10:53:47.639: dot1x-packet:EAPOL pak Tx - Ver: 0x3 type: 0x0
Oct 24 10:53:47.639: dot1x-packet: length: 0x0004
Oct 24 10:53:47.639: dot1x-packet:EAP code: 0x4 id: 0x1 length: 0x0004
Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL canned status packet sent to client 0x15000045
Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Deleting client 0x15000045 (6431.500e.9b00)
Oct 24 10:53:47.639: %AUTHMGR-7-STOPPING: Stopping 'dot1x' for client 6431.500e.9b00 on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.639: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
Oct 24 10:53:47.648: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Delete auth client (0x15000045) message
Oct 24 10:53:47.648: EAP-EVENT: Received free context (0xE8000047) from LL (Dot1x-Authenticator)
Oct 24 10:53:47.648: dot1x-ev:Auth client ctx destroyed
Oct 24 10:53:47.648: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_DELETE' on handle 0xE8000047
Oct 24 10:53:47.648: EAP-AUTH-EVENT: Freed EAP auth context
Oct 24 10:53:47.648: EAP-EVENT: Freed EAP context
Oct 24 10:53:48.621: EAP-EVENT: Stopped EAP tick timer
Oct 24 10:53:49.485: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to up
Oct 24 10:53:50.491: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
Oct 24 10:53:54.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
Oct 24 10:53:55.524: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to downHi Jatin,
See below the data that you have requested.
show run bits.
aaa new-model
aaa authentication dot1x default group radius
aaa session-id common
clock timezone BST 0 0
clock summer-time UTC recurring last Sun Mar 1:00 last Sun Oct 2:00
dot1x system-auth-control
interface GigabitEthernet1/0/13
switchport access vlan 80
switchport mode access
authentication port-control auto
dot1x pae authenticator
spanning-tree portfast
interface GigabitEthernet1/0/48
switchport trunk encapsulation dot1q
switchport trunk native vlan 70
switchport mode trunk
radius server NPS1
address ipv4 192.168.19.121 auth-port 1645 acct-port 1646
timeout 10
key thesecret
ip default-gateway 192.168.70.1
SW1-randy#show auth sessions interface gig 1/0/13
Interface MAC Address Method Domain Status Fg Session ID
Gi1/0/13 803f.5d09.189e N/A UNKNOWN Unauth C0A846660000002F00251DBC
SW1-randy#Show mac address-table Interface GigabitEthernet1/0/13
Mac Address Table
Vlan Mac Address Type Ports
80 803f.5d09.189e DYNAMIC Drop
SW1-randy#ping 192.168.19.121
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.19.121, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
Here is a wireshark of the accept packet.
Message was edited by: randy coburn
Added wireshark trace -
Windows 7 – 802.1x Authentication fails after wakeup from Sleep/Hibernation
In our environment we randomly have issues with 802.1x authentications after Sleep or Hibernation of our client-systems.
Clients have Windows 7 as OS and are up-to-date regarding regular updates/patches. Drivers (at least
network and chipset) on affected machines have also been updated.
802.1x authentication method is PEAP (EAP-MSCHAPv2) and systems are validated
against Active Directory by RADIUS.
Analyzing the logs of our RADIUS-Server you can see that the client trys to authenticate
via MAC instead of its DNS-Name/FQDN (desired method). So the request fails and the client is assigned to a different VLAN without access to the company’s resources. Following steps like DHCP work correctly.
We have enabled the tracing of RAS-components on some of our clients by executing the following command-line: netsh ras set tracing
* enabled
Analyzing the client’s log-file “C:\Windows\tracing\svchost_RASCHAP.LOG” it looks like that the
component is simply not up at that point in time, because there are absolutely no entries making it impossible to search for a specific error/error-code. Side-fact: unplugging the network-cable and plugging it in again forces the client to
authenticate again – successfully and with entries in the given log.
There has been an article KB980295 describing my issue but that does not apply to Windows 7. Hotfix KB2736878 cannot be applied (0x80240017
- install is not needed because no updates are applicable).
Does anyone have an idea how you could force the component to initialize earlier (if it is possible at all)?
Any other advice is highly appreciated as well!
Thanks a lotHi Deason,
sorry for my very very late reply on this.
Even if I could not solve the problem yet, I can tell about some progress.
As both KB-Files (980295 and 2481614) sadly did not help with this at all and even setting the blockperiod to 1 (I saw that 0 doesn't seem to be supported here: https://technet.microsoft.com/en-us/library/hh831813.aspx) didn't make any difference I
have been working on how to reproduce the issue. So I wrote a tiny script disabling and enabling the client's network-port on and on (I have removed outputs and logging to keep it short):
$doAllTheTime = $true
$i = 0
$DomainName = (Get-WmiObject -Class Win32_ComputerSystem).domain
$NWAdapter = Get-WmiObject -Class Win32_NetworkAdapter | ? {$_.name -like "*gigabit*"}
while ($doAllTheTime -eq $true)
$i++
$NWAdapter.disable() | out-null; Start-Sleep -Seconds 10
$NWAdapter.enable() | out-null; Start-Sleep -Seconds 10
$ping = $null
$ping = test-connection $DomainName -count 1
if ($ping -eq $null)
"Error with connection"; return
So I kept it running and after a dozens of loops the issue reoccurred. I could see that it is the dot3svc-Service that does not response anymore by the RASCHAP-log given above. Restarting the service manually triggered a re-authentication that was then successful.
So I added the restart-service-cmdlet to my script in case that the error was detected and configured a Scheduled Task triggered by the event that a network-cable has been plugged in (has to be provided by the driver). Script and Scheduled Task
have then been deployed to our clients.
Even if this is no solution it definitely helps with a high rate of incidents -
but not entirely... so I am still looking for further steps to
solve this. Any ideas are highly appreciated.
Thank you very much for your support!!! Uhle -
Instant Messaging Server configuration failed after installation
Hi,
I have a problem with the configuration of Instant Messaging server as part Sun Java Communications Suite 6u2.
IM had been installed using commpkg install --altroot -installroot /opt/sun/comms2 (should run in cluster environment).
Running configure failed when looking for package SUNWiimin. Due to the altroot installation the package information resides under /opt/sun/comms2/var/sadm/...
Since configure is just a shell script those incorrect calls could be fixed (e.g. pkgparam -R /var/opt/sun/comms2 SUNWiimin instead of
pkgparam SUNWiimin.
Unfortunately configure calls com.sun.im.config.core.Configurator as a Java program. In this program IM_BASE seems not tobe set which leads to:
Executing command : null/sbin/impermissions inetuser r /var
Error in executing command : null/sbin/impermissions inetuser r /var
java.io.IOException: null/sbin/impermissions: not found
at java.lang.UNIXProcess.forkAndExec(Native Method)
at java.lang.UNIXProcess.<init>(UNIXProcess.java:53)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:429)
at com.sun.im.util.Command.execute(Unknown Source)
at com.sun.im.config.util.CommandExecutor.execute(CommandExecutor.java:134)
at com.sun.im.config.util.CommandExecutor.executeRuntimeCommand(CommandExecutor.java:41)
at com.sun.im.config.validation.SROValidator.createRuntimeDir(SROValidator.java:220)
at com.sun.im.config.validation.SROValidator.isValid(SROValidator.java:133)
at com.sun.im.config.validation.PanelValidator.isValid(PanelValidator.java:33)
at com.sun.im.config.core.CLIEngine.renderUI(CLIEngine.java:124)
at com.sun.im.config.core.Configurator.main(Configurator.java:157)
Return value: -1
Is this bug fixed somewhere??
Regards,
Rudigerrudidotk wrote:
Is this bug fixed somewhere?? This has been known issue for some time that still hasn't been fixed:
bug #6733030 - "IM7.3: altroot installation causes configure to error with null/sbin/impermissions: not found"
Please raise a Sun support request to have this bug escalated.
Regards,
Shane. -
Sapstart fails after installation of CPU-Patch April2009 on Oracle 10.2.0.4
Hi Experts,
after installing the CPU-Patch April2009 for Oracle 10.2.0.4, startsap fails with error code 12.
Starting everything manually works (lsnrctl start, sqlplus and do startup, after that startsap works).
When the listener and the database are running, things like R3trans -x also work without errors.
I found a SAP-Note 97953 but I don't know if this is the solution. Some of the oracle-executables in the bin-directory have been modified. So there is a "oracle" and a "oracle0" . The timestamp indicates to me that these files were modified while implementing the CPU-Patch.
I also checked SAP-Note 583861but with no success.
regards
DirkHi Markus,
if the database ist down and I execute "R3trans -d" I'll get the following error.
R3trans -d
This is R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'QXI'"
R3trans finished (0012).
and trans.log looks like:
more trans.log
4 ETW000 R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 19.06.2009 - 09:36:55
4 ETW000 control file:
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 Fri Jun 19 09:36:55 2009 123 0.000123
4 ETW000 db_con_init called 17 0.000140
4 ETW000 determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 66 0.000206
4 ETW000 create_con (con_name=R/3) 21 0.000227
4 ETW000 Loading DB library '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' ...
4 ETW000 65 0.000292
4 ETW000 load shared library (/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so), hdl 0
4 ETW000 10039 0.010331
4 ETW000 Library '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' loaded
4 ETW000 26 0.010357
4 ETW000 function DbSlExpFuns loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so
4 ETW000 35 0.010392
4 ETW000 Version of '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' is "710.16", patchlevel (0.6
0)
4 ETW000 75 0.010467
4 ETW000 function dsql_db_init loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so
4 ETW000 26 0.010493
4 ETW000 function dbdd_exp_funs loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.s
o
4 ETW000 66 0.010559
4 ETW000 New connection 0 created 31 0.010590
4 ETW000 0: name = R/3, con_id = -000000001 state = DISCONNECTED, tx = NO , bc = NO , hc = NO , p
erm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.010629
4 ETW000 db_con_connect (con_name=R/3) 30 0.010659
4 ETW000 determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 24 0.010683
4 ETW000 find_con_by_name found the following connection:
4 ETW000 25 0.010708
4 ETW000 0: name = R/3, con_id = 000000000 state = DISCONNECTED, tx = NO , bc = NO , hc = NO , pe
rm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.010740
4 ETW000 Oracle Client Version: '10.2.0.2.0' 503 0.011243
4 ETW000 -->oci_initialize (con_hdl=0) 30 0.011273
4 ETW000 Environment NLS_LANG='AMERICAN_AMERICA.UTF8' 21 0.011294
4 ETW000 application info callback registered 16 0.011310
4 ETW000 Client NLS settings: 'AMERICAN_AMERICA.UTF8' 3166 0.014476
4 ETW000 Logon as OPS$-user to get SAPSR3's password 36 0.014512
4 ETW000 Connecting as /@QXI on connection 0 (nls_hdl 0) ... (dbsl BIN 220507)
4 ETW000 50 0.014562
4 ETW000 Nls CharacterSet NationalCharSet C EnvHp ErrHp Er
rHpBatch
4 ETW000 35 0.014597
4 ETW000 0 UTF8 1 2bcdc70 2bd56c0
2be5df8
4 ETW000 28 0.014625
4 ETW000 Allocating server context handle 35 0.014660
4 ETW000 Attaching to DB Server QXI (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 77 0.014737
4 ETW000 Assigning server context 2be8018 to service context 2be5d28
4 ETW000 25597 0.040334
4 ETW000 Starting user session (con_hdl=0,svchp=2be5d28,srvhp=2be8018,usrhp=2bd5ed8)
4 ETW000 71 0.040405
4 ETW000 OCI-call failed with -1=OCI_ERROR 3460 0.043865
4 ETW000 SQL error 1034: 'ORA-01034: ORACLE not available
4 ETW000 ORA-27101: shared memory realm does not exist 103 0.043968
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 51 0.044019
4 ETW000 server_detach(con_hdl=0,stale=1,srvhp=2be8018) 18 0.044037
4 ETW000 Detaching from DB Server (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 30 0.044067
4 ETW000 Deallocating server context handle 2be8018 from con_hdl=0
4 ETW000 233 0.044300
4 ETW000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 52 0.044352
4 ETW000 set_ocica() -> OCI or SQL return code 1034 26 0.044378
4 ETW000 OCIErrorGet -> SQL error code: 0 54 0.044432
4 ETW000 error text: 'ORA-01034: ORACLE not available 18 0.044450
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 Try to connect with default password 30 0.044480
4 ETW000 Connecting as SAPSR3/@QXI on connection 0 (nls_hdl 0) ... (dbsl BIN 220507)
4 ETW000 32 0.044512
4 ETW000 Nls CharacterSet NationalCharSet C EnvHp ErrHp Er
rHpBatch
4 ETW000 30 0.044542
4 ETW000 0 UTF8 1 2bcdc70 2bd56c0
2be5df8
4 ETW000 29 0.044571
4 ETW000 Allocating server context handle 17 0.044588
4 ETW000 Attaching to DB Server QXI (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 41 0.044629
4 ETW000 Assigning server context 2be8018 to service context 2be5d28
4 ETW000 23436 0.068065
4 ETW000 Assigning username to user session 2bd5ed8 23 0.068088
4 ETW000 Assigning password to user session 2bd5ed8 41 0.068129
4 ETW000 Starting user session (con_hdl=0,svchp=2be5d28,srvhp=2be8018,usrhp=2bd5ed8)
4 ETW000 33 0.068162
4 ETW000 OCI-call failed with -1=OCI_ERROR 2900 0.071062
4 ETW000 SQL error 1034: 'ORA-01034: ORACLE not available
4 ETW000 ORA-27101: shared memory realm does not exist 73 0.071135
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 55 0.071190
4 ETW000 server_detach(con_hdl=0,stale=1,srvhp=2be8018) 20 0.071210
4 ETW000 Detaching from DB Server (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 25 0.071235
4 ETW000 Deallocating server context handle 2be8018 from con_hdl=0
4 ETW000 144 0.071379
4 ETW000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 32 0.071411
4 ETW000 set_ocica() -> OCI or SQL return code 1034 16 0.071427
4 ETW000 OCIErrorGet -> SQL error code: 0 51 0.071478
4 ETW000 error text: 'ORA-01034: ORACLE not available 19 0.071497
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 ***LOG BY2=>sql error 1034 performing CON 131 0.071628
4 ETW000 ***LOG BY0=>ORA-01034: ORACLE not available 21 0.071649
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'QXI'"
If the database is up everything works. Here is the output of "R3trans -d"
R3trans -d
This is R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
unicode enabled version
R3trans finished (0000).
For me this all looks o.k. when the database is down R3trans won't be able to reach it and if the database is up it works. But why I can't then just execute "sapstart" ?
Edited by: Dirk Rödl on Jun 19, 2009 9:46 AM
Edited by: Dirk Rödl on Jun 19, 2009 9:48 AM
Edited by: Dirk Rödl on Jun 19, 2009 9:49 AM -
[SOLVED] KVM and Qemu fail after installation
I tried installing Windows 7 and Vista with both Qemu and KVM.
Installation goes fine but after Windows reboots during the installation I only get a strange screen after the bios. It shows some random characters, as shown in the image. I tried varying the filesystem (raw, qcow and qcow) and the memory size, etc. but nothing works, not even the standalone kvm project. Any suggestions?
I used the following code to install the OS:
qemu-img create -f qcow2 windows7.img 20G
qemu -enable-kvm -boot d -m 1500 -hda windows7.img -cdrom win7.iso
Last edited by Wilco (2009-11-29 08:26:59)I had the same problem. i have tried many things (even -vga std) but that screen always appear at reboot. because i really wanted to give w7 a try i have tested another windows 7 iso. VERDICT : IT WORKS PERFECTLY. so, just try with another iso.
-
Outlook 2010 Basic Authentication Fails after Server Update
It appears that since updating our 2 DCs (Win 03 Enterprise SP2) with windows update released this week (March 10 - fully patched before), Outlook
users using Basic Authentication all failed to connect to our Ex 03 SP2 server.
Domain users connecting using NTLM has no problem. Our Ex server has also been updated ..
Can anyone suggest how to trouble shoot? Thanks a lot.Hi,
How did those server use Basic Authentication Set-up? Was there any difference between Domain Users and users who use basic authentication?
Meanwhile we can start checking below items:
Ping your Exchange server address/DNS from the client machine which using basic authentication, see if the Exchange server was pingable.
NSlookup Exchange server address/DNS from the client machine which using basic authentication, see if the address/DNS of the Exchange server could be resolved from client.
Collecting Outlook log from client machine which using basic authentication, default location is: C:\Users\<user>\AppData\Local\Temp\outlook logging\<user email account>-<user>.ost.log
at current date time.
Send the log though mail to: [email protected]
Let me know the result about 1 and 2 here or along with mail. Thanks. -
I recently had my Mac book circa 2006 updated to OS Lion and in the process was told I needed a new hard drive. I just replaced my original hard drive 9 months ago and was told at that time not to put too large a hard drive on my laptop or it could overheat. Now I have gone through 2 hard drives in the past 3 weeks since updating to Lion both of which were a terabyte in size. The authorized repair shop that put both failed hard drives in insists that the size of the hard drive does not cause problems in the Mac book but I am wondering why 2 failed in such a short time when the smaller hard drive lasted. It was working when I took it in for the updates but their diagnotic test showed that the first replacement HD was failing. I'm not sure what to think now.
Can I take that cloned hard drive and just plug it into my new Mac Mini and Viola I have two computers set up perfectly
Yes. -
FileChooser fails after installation
I have been using the JDK 1.5.0 update 6 for a while, and composing with NetBeans. Almost everything works fine: web start, command line, NetBeans (mostly). However, anytime I try to bring up a file chooser with Java, the Java program seems to go into an infinite loop. The symptoms are 99% usage of the CPU by java.exe, no response from the program nor timeout of the attempt to open a file chooser.
I know this is not a coding error since I not only get this result with javax.swing.JFileChooser in my own apps but I also get the problem when clicking File->Open... or File->New... and then browse in NetBeans. The same happens in NetBeans versions 4.1 and 5.0, and also in the java control panel, so I'm pretty sure it is some kind of installation issue.
Just to note, I have installed/uninstalled JDK 1.5.0 update 6 several times now, each time totally uninstalling the JRE as well. I am running 32-bit Windows XP, SP2. I have no idea how to fix this problem, and it is a highly annoying one since it means that I cannot browse files from any Java program.Probably a problem in either Netbeans' preference/configuration file, or in one of your projects.
Try each of these:
NetBeans stores configuration and preference data in this file by default:
C:\Documents and Settings\<userid>\.netbeans
Rename this file or move it elsewhere, and let NB create a new file (which it will do when it can't find an existing one.) This resets NB to the default "out-of-the-box" configuration.
Start NB and change the projects directory to a new, empty directory.
One of these will probably cure the problem. -
Crash reports:
bp-3bfec1c0-afb1-4810-a0a6-87f302140731
bp-1c7f71c2-c492-42fe-8442-468d72140731
bp-8cacf2ea-873d-4b73-8ab6-82f2f2140731
bp-a5d8767e-4c86-4b0e-8ae0-6be132140731
bp-aa11348b-bf7e-4cff-83e5-cbac52140731
bp-c708c1fd-bfe4-48ed-8c57-656872140731
bp-d4827e75-99ff-48a9-8cb8-3929f2140731This is another startup crash, however is there an issue with malware in one of the module lists.
HooksCore.dll is red, try a malware scan first. Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
BootCamp fails after installation of Windows 7 Ultimate 64bit
So guys , as we know loads of people had same issue i been searching it for whole day and couldnt get any answer. First i have installed Windows XP home 32bit sp3 whole computer worked like charm. Today i have deleted xp did re partition installed Windows 7 Ultimate 64bit success but for some reason there is not Sound. no iSight and no wifi red light on sound jack. and boot camp is not working.Really can some1 help ?
thanks for replay but i dont have 3.0 i have 3.1 allready in DVD
btw : i forgot to say i have installed Nvidia remotely but not starting with windows and i did everything that i can to install but i will uninstall bootcamp and will download 3.0 then 3.1 as you said.
Thanks
Message was edited by: Mamuq -
hello!
my aol email has frozen on my phone. I tried refreshing and that did not work. I deleted my email account and now when I try to restart the email account it says authentication failed (after checking incoming server settings). my friend has the same phone, her email froze last week, she refreshed it and now it works. I don't understand why mine is not working. any help or suggestions would be appreciated.Artesianrev,
We want you to be able to enjoy using your email account on your Samsung Galaxy S4! Have you checked to make sure your email account does not have 2-step verification set up on it? http://bit.ly/1njb5e4 Are you manually entering it the server information for the email account? http://vz.to/1jZGAq6
LindseyT_VZW
Follow us on Twitter @VZWSupport -
ERROR: Ldap Authentication failed for dap during installation of iAS 6.0 SP3
I am attempting to install ias Enterprise Edition (6.0 SP3) on solaris 2.8 using typical in basesetup. I am trying to install new Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url ldap://hostname:389/o=NetScape Root user id admin (151: Unknown Error)
Fatal Slapd did not add Directory server information to config Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to restart
LDAP. When finished, press ENTER to continue, or S to skip this step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at javax.naming.NameNotFoundException.<init>(NameNotFoundException.java: 48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I got the following error;
"Cant connect ot the admin server. The url is not correct or the server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login. make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
MadhaviHi,
Make sure that the directory server is installed first. If it is running
ok, then you can try adding an admin user, please check the following
technote.
http://knowledgebase.iplanet.com/ikb/kb/articles/4106.html
regards
Swami
madhavi korupolu wrote:
I am attempting to install ias Enterprise Edition (6.0 SP3) on
solaris 2.8 using typical in basesetup. I am trying to install new
Directory server as I don't have an existing one.
During the installation I got the following error.
ERROR: Ldap Authentication failed for url
ldap://hostname:389/o=NetScape Root user id admin (151: Unknown
Error)
Fatal Slapd did not add Directory server information to config
Server.
Warning slapd could'nt populate with ldif file Yes error code 151.
ERROR:Failure installing iPlanet Directory Server.
Do you want to continue: ( I entered yes )
Configuring Administration Server Segmentation fault core dumped.
Error: Failure installing Netscape Administration Server.
Do you want to continue:( I responded with yes).
And during the Extraction I got the following
ERROR:mple_bind: Can't connect to the LDAP server - No route to host
ERROR: Unable to connect to LDAP Directory Server
Hostname: hostname
Port: 389
User: cn=Directory Manager
Password: <password-for-cn=Directory Manager
Please make sure this Directory Server is currently running.
You might need to run 'stop-slapd' and then
'start-slapd' in the Directory Server home directory, in order to
restart
LDAP. When finished, press ENTER to continue, or S to skip this
step:
Start registering Bootstrap EJB...
javax.naming.NameNotFoundException
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.fillInStackTrace(Compiled Code)
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled > Code)
at javax.naming.NamingException.<init>(NamingException.java:114)
at
javax.naming.NameNotFoundException.<init>(NameNotFoundException.java:
48)
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
"ldaperror" 76 lines, 2944 characters
at com.netscape.server.jndi.RootContext.resolveCtx(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at com.netscape.server.jndi.RootContext.bind(Unknown Source)
at javax.naming.InitialContext.bind(InitialContext.java:371)
at com.netscape.server.deployment.EjbReg.deployToNaming(Unknown
Source)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.registerEjbJar(Compiled
Code)
at com.netscape.server.deployment.EjbReg.run(Compiled Code)
at com.netscape.server.deployment.EjbReg.main(Unknown Source)
Start registering iAS 60 Fortune Application...
Start iPlanet Application Server
Start iPlanet Application Server
Start Web Server iPlanet-WebServer-Enterprise/6.0SP1 B08/20/200100:58
warning: daemon is running as super-user
[LS ls1] http://gedemo1.plateau.com, port 80 ready
to accept requests
startup: server started successfully.
After completion of installation, I tried to start the console. But I
got the following error;
"Cant connect ot the admin server. The url is not correct or the
server is not running.
Finally,when I started the admintool(iASTT),it shows the iAS1
was registered( marked with a red cross mark) and says "cant login.
make sure the user
name & passwdord are correct" when i click on it.
Thanks in advance for any help
Madhavi
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!
Maybe you are looking for
-
I need help my iphone was stolen last week and some how the person who stole it got my iTunes stuff. I need to change everything so that I can buy stuff for my phone. Please help I don't remember my security question answers ( I made this account whe
-
Can I install an SSHD into a Notbook Pavilion 15-e092sa
Hi, I've been trying all afternoon to install a Solid State Hybrid Drive into my Hp Pavilion 15-e092sa. No matter what I do, the new SSHD isn't recognised. Things show up like: SMART Hard Disck Error - detected imminent failure Hard Disck 1 (301) And
-
I am simply trying to draw an image over a JPanel and it will not appear until the JFrame has been minimised or hidden behind something. Ive tried all kinds of repainting. Ive seen this topic before, but none seems to have a clear answer. HEPL! pleas
-
Update plant on BSEG based on Inter-company invoice
Dear All, I have requirement to update Plant on BSEG for an Intercompany invoice. Does there exists any customization for the same? Currently the Accounting document is getting generated but plant field in empty. If not can you please suggest the use
-
Edit existing or add new record based on key field
Greetings and Salutations! I am working on an APEX 3.0 application and I need to verify a key field value to determine if the record already exists, if it does not exist, I need to add it, if it does exist, I need to update/edit it. I'm not sure how