Authentication failed all of a suddden

We just set up an 1200 AP with WPA and all was well for that day, today of the 3 devices that access it only 2 will connect now. I get Authentication failed on the other. I have re-entered the WPA key a billion times now, I tried turning on some debugging in the CLI but it is apparent I do not know what I am doing/looking for . Any help would be great! At this point I could reconfigure I guess but I want to find out the problem.

No specific reason we could say about. Only constraint is software support for WPA-PSK. WPA-PSK is being supported by cisco for years now . So all the access point comes with a version that supports WPA-PSK.

Similar Messages

  • "invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, ALL SETTING ARE CORRECT HELP

    I have been updating my site over the last week, using Iweb SEO TOOL, but suddenly 2 days ago I can no longer update when i go to publish it says "invalid password "on Iweb Test. and on SEO Tool, Login Failed Login Authentication Failed, the password and all settings are correct.
    I am 100% sure the all the setting are correct, as it has been working for the last 7 months and I have just been updating it, then suddenly it stopped, I have all the FTP settings wrote down, and even changed the passwords twice hoping that may work to no avail.

    Try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    If that doesn't help continue with:
    move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
    launch iWeb, create a new test site, save the new domain file and close iWeb.
    go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
    move your original domain file from the Desktop to the iWeb folder.
    launch iWeb and try again.

  • SAP Business One Integration Services Authentication Failed

    Dear ,
    ALL SAP forum members,
    Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
    In SLD B1DI and  JDBC, the connections were tested successfully.
    Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
    I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
    In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info  and I found the following message under Action message "Wrong Usrname and Password".
    I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
    But could not understand much of it.
    But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
    I hope some experts will guide me over this issue
    Thanks and regards
    Ashish Gupte

    Hi Konstantin Ryahovsky
    Thanks for your reply. My problem is solved.
    And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
    only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
    Thanks & regards
    Ashish Gupte

  • I'm trying to connect through the FTP client Filezilla. When I try to login with the wizard, it gives me a "503 Failure of Data Connection" reply; when I attempt to login myself, it gives me a "530 Login Authentication Failed." HELP!!!

    My current softward is: Mac OS X Lion 10.7.5 (11G63)
    When I attempt to use the Filezilla connection wizard I get the following message:
    Connecting to probe.filezilla-project.org
    Response: 220 FZ router and firewall tester ready
    USER FileZilla
    Response: 331 Give any password.
    PASS 3.7.1.1
    Response: 230 logged on.
    Checking for correct external IP address
    Retrieving external IP address from http://ip.filezilla-project.org/ip.php
    Checking for correct external IP address
    IP 27.0.19.56 ch-a-bj-fg
    Response: 200 OK
    PREP 52470
    Response: 200 Using port 52470, data token 1871898076
    PORT 27,0,19,56,204,246
    Response: 200 PORT command successful
    LIST
    Response: 150 opening data connection
    Response: 503 Failure of data connection.
    Server sent unexpected reply.
    Connection closed
    When I attempt to login Host/Username/Password myself I get the following message:
    Status:          Resolving address of amyhoney.com
    Status:          Connecting to 184.168.54.1:21...
    Status:          Connection established, waiting for welcome message...
    Response:          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------
    Response:          220-You are user number 12 of 500 allowed.
    Response:          220-Local time is now 04:05. Server port: 21.
    Response:          220-This is a private system - No anonymous login
    Response:          220 You will be disconnected after 3 minutes of inactivity.
    Command:          USER 5475****
    Response:          331 User 5475**** OK. Password required
    Command:          PASS ********************
    Response:          530 Login authentication failed
    Error:          Critical error
    Error:          Could not connect to server
    Now before anyone points out the obvious: my username and password are correct. I've already gone through changing them so I know they are.
    Additionally, I've pretty much tried EVERYTHING I've read online, from messing with "terminal" (and subsequently the FTP and STFP options) to changing the sharing options and turning on file sharing/remote management as well as just turning off my Firewall completely.
    Now I've used Filezilla before when I first published my site and everything worked fine. My site is published through Wordpress so most of my editing was done through simply logging into my "wp-login." I recently changed the theme and in order to change the header image in that theme I have to do it through my "wp-content" folder, which means I need to use Filezilla. I feel like a complete moron right now considering I've had my site for about a year and can't even doing something this simple.
    I've read that the newer version of Lion/Mountain Lion don't support automatice FTP anymore, which (as I mentioned prior) I attempted to fix through Terminal. However, nothing I do seem to do works.
    Can someone walk me through fixing this? And I do mean 'walk me through'. I'm not a tech-savvy nerd who knows all the lingo, I just know the basics so sorry if my ignorance offends you.
    HELP!!

    First be sure login and password are OK. Sometimes the address starts wit "http://..." and sometime starts with "ftp://...". Try both normal FTP access and Scure FTP access (SFTP). At the end, contact the site's provider.

  • BO XI 3.1 : Active Directory Authentication failed to get the Active Directory groups

    Dear all 
            In our environment, there are 2 domain (domain A and B); it works well all the time. Today, all the user belong to domain A are not logi n; for user in domain B, all of them can log in but BO server response is very slowly. and there is error message popup when opening Webi report for domain B user. Below are the error message: 
           " Active Directory Authentication failed to get the Active Directory groups for the account with ID:XXXX; pls make sure this account is valid and belongs to an accessible domain"
          Anyone has encountered similar issue?
       BO version: BO XI 3.1 SP5
       Authenticate: Windows AD
    Thanks and Regards

    Please get in touch with your AD team and verify if there are any changes applied to the domain controller and there are no network issues.
    Also since this is a multi domain, make sure you have 2 way transitive forest trust as mentioned in SAP Note : 1323391 and FQDN for Directory servers are maintained in registry as per 1199995
    http://service.sap.com/sap/support/notes/1323391
    http://service.sap.com/sap/support/notes/1199995
    -Ambarish-

  • I keep getting a notification that says "Google Talk authentication failed"...does anyone know how to get rid of this?  I tried looking for it in the apps but not really sure what google talk is or how to get rid of this message that keeps popping up.

    How do i get rid of the message that keeps popping up that says "google talk authentication failed"????

    funwidowlady,
    Good afternoon!  I'm glad I can be here to help with this error. In the device this application is identified only as 'Talk', so that be more familiar to you. First I recommend opening the 'Market' app on your phone, then Menu>My Apps to see if this application requires an update. It will display a list on top of all applications that need to be updated. If nothing exists, tap 'Home' and go into 'Settings>Applications>Manage Applications>Talk, then tap 'Clear Cache' and 'Clear Data' to remove the history of that application and stop the notifications.  The app will remain on your phone for future use, if you desire to take advantage of it. Read more about Google Talk here
    Thank you!
    AdamE_VZW
    Follow us on Twitter @VZWSupport

  • "Ticket authentication failed" error in Principal Propagation scenario

    Hi All,
    I am working on Principal Propagation, where the scenario is sync RFC-PI-RFC. I have followed all steps mentioned in the below blog. When I execute the scenario (with Principal propagation box checked in the sender agreement) I get dump while executing the RFC from sender system. The dump is:
    "Ticket authentication failed"
    Scenario works fine if I don't check Principal propagation check box in the sender agreement.
    Principal Propagation blog: /people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
    Can anyone suggest what can be the reason for this dump?
    Thanks,
    Shweta.

    Hi All,
    Any inputs on this?
    Thanks,
    Shweta.

  • Error while saving Report output-Authentication failed

    Hi All,
    For the client system there is a customization report with output of html format. it can't display all with the error message
    unable to open the internet site. http://<site:port>/OA_CGI/FNDWRR.exe?temp_id=<temp_id>*
    operation aborted*
    if user choose to "save as" , it will back with error message
    Authentication failed*
    Can anyone here give me some guide?
    Best Regards,
    Chelsea

    Refer Note 184154.1
    Regards,
    Srini

  • MIC not verified # authentication-failed

    Hi,
    We are getting this error while trying to send messages from XI through AS2:
    MIC not verified # authentication-failed
    Can anybody please let us know the reason for this error.
    Thanks in advance.
    Best Regards,
    Shweta

    Hi Shabarish & Prateek,
    Thanks a lot for the information.
    I've also checked this information in Seeburger document and I agree this can be an issue with the Certificate.
    But these scenarios were working fine for a long time,the Certificates are valid till 2016.
    And the most important thing is,we get this error in 1 message out of 100-200,other messages are sent successfully.
    So,if this is an issue with certificate,how is it possible that it affects only 1-2 messages not all.
    I had never seen this error before and suddenly we have started getting such errors for a number of scenarios for last 15 days.
    I believe ,there can be a problem with Certificate for 1 customer but if it is more than one ,it is hard to believe that all of them have problems with Certificates and at the same time.
    I tried to search for notes related to this problem.
    Is it something related to MIME content,as mentioned in note 1287778?
    Kindly let me know.
    Thanks.
    Regards,
    Shweta

  • 802.1x port authentication failing after getting a access-accept packet

    Hi all,
    Im not 100% sure what the hell is going on here.
    Any idea's or help will be appreciated.
    Heres the topology.
    1 x windows 2012 NPS
    1x 3750X
    1x Windows 7 x64
    data flow
    <laptop> - - [gi 1/0/13]<3750X>[gi 1/0/48]- -[gi 5/39]<6513>[po 1] - - [po 4]<6509><5/1> - - <VMWARE>[NPS Server]
    The switch that is doing the authentication is the 3750X. Here is the IOS version.
    Switch Ports Model              SW Version            SW Image
    *    1 54    WS-C3750X-48       15.2(1)E              C3750E-UNIVERSALK9-M
    A wireshark trace on the NPS server shows that the packets are arriving and being sent back
    Wireshark on a mirror of the trunk port connecting the 6513. It also shows packets being sent and arriving. access-accept packets are being recieved.
    As you can see in the debug output, the switch is getting a access-accept, then it is stating a AAA failure.
    here is a debug output as you plug in the laptop.
    Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
    Oct 24 10:53:44.653: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
    Oct 24 10:53:45.643: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
    Oct 24 10:53:46.641: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to down
    Oct 24 10:53:47.538: dot1x-ev:[Gi1/0/13] Interface state changed to UP
    Oct 24 10:53:47.564: dot1x-packet:[6431.500e.9b00, Gi1/0/13] queuing an EAPOL pkt on Auth Q
    Oct 24 10:53:47.572: dot1x-ev:DOT1X Supplicant not enabled on GigabitEthernet1/0/13
    Oct 24 10:53:47.572: dot1x-packet:EAPOL pak rx - Ver: 0x1  type: 0x1
    Oct 24 10:53:47.572: dot1x-packet: length: 0x0000
    Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 0,TYPE= 0,LEN= 0
    Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0101.0000
    Oct 24 10:53:47.572: dot1x-ev:[Gi1/0/13] Couldn't find the supplicant in the list
    Oct 24 10:53:47.572: dot1x-ev:[6431.500e.9b00, Gi1/0/13] New client detected, sending session start event for 6431.500e.9b00
    Oct 24 10:53:47.572: AAA/BIND(00000047): Bind i/f
    Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Sending create new context event to EAP for 0x15000045 (6431.500e.9b00)
    Oct 24 10:53:47.580: EAP-EVENT: Received context create from LL (Dot1x-Authenticator) (0x15000045)
    Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received AAA ID 0x00000047 from LL
    Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: Assigning AAA ID 0x00000047
    Oct 24 10:53:47.580: EAP-AUTH-AAA-EVENT: CTS not enabled on interface Gi1/0/13
    Oct 24 10:53:47.580: EAP-AUTH-EVENT: Received Session ID "C0A846660000004700DF6030" from LL
    Oct 24 10:53:47.580: EAP-AUTH-EVENT: Setting authentication mode: Passthrough
    Oct 24 10:53:47.580:     eap_authen : initial state eap_auth_initialize has enter
    Oct 24 10:53:47.580: EAP-EVENT: Allocated new EAP context (handle = 0xE8000047)
    Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Created a client entry (0x15000045)
    Oct 24 10:53:47.580: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Dot1x authentication started for 0x15000045 (6431.500e.9b00)
    Oct 24 10:53:47.580: %AUTHMGR-5-START: Starting 'dot1x' for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
    Oct 24 10:53:47.580: EAP-EVENT: Received EAP event 'EAP_AUTHENTICATOR_START' on handle 0xE8000047
    Oct 24 10:53:47.580:     eap_authen : during state eap_auth_initialize, got event 25(eapStartTmo)
    Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_initialize -> eap_auth_select_action
    Oct 24 10:53:47.580:     eap_authen : during state eap_auth_select_action, got event 20(eapDecisionPropose)
    Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_select_action -> eap_auth_propose_method
    Oct 24 10:53:47.580:     eap_authen : idle during state eap_auth_propose_method
    Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_propose_method -> eap_auth_method_request
    Oct 24 10:53:47.580:     eap_authen : idle during state eap_auth_method_request
    Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_method_request -> eap_auth_tx_packet
    Oct 24 10:53:47.580: EAP-AUTH-EVENT: Current method = Identity
    Oct 24 10:53:47.580: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_ID_REQUEST' on handle 0xE8000047
    Oct 24 10:53:47.580:     eap_authen : idle during state eap_auth_tx_packet
    Oct 24 10:53:47.580: @@@ eap_authen : eap_auth_tx_packet -> eap_auth_idle
    Oct 24 10:53:47.589: EAP-AUTH-TX-PAK: Code:REQUEST  ID:0x1   Length:0x0005  Type:IDENTITY
    Oct 24 10:53:47.589: EAP-EVENT: Started 'Authenticator ReqId Retransmit' timer (30s) for EAP sesion handle 0xE8000047
    Oct 24 10:53:47.589: EAP-EVENT: Started EAP tick timer
    Oct 24 10:53:47.589: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_TX_PACKET' on handle 0xE8000047
    Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
    Oct 24 10:53:47.597: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
    Oct 24 10:53:47.597: dot1x-packet:EAPOL pak Tx - Ver: 0x3  type: 0x0
    Oct 24 10:53:47.597: dot1x-packet: length: 0x0005
    Oct 24 10:53:47.597: dot1x-packet:EAP code: 0x1  id: 0x1  length: 0x0005
    Oct 24 10:53:47.597: dot1x-packet: type: 0x1
    Oct 24 10:53:47.597: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL packet sent to client 0x15000045
    Oct 24 10:53:47.606: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Queuing an EAPOL pkt on Authenticator Q
    Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1  type: 0x0
    Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
    Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Dequeued pkt: Int Gi1/0/13 CODE= 2,TYPE= 1,LEN= 31
    Oct 24 10:53:47.606: dot1x-ev:[Gi1/0/13] Received pkt saddr =6431.500e.9b00 , daddr = 0180.c200.0003, pae-ether-type = 888e.0100.001f
    Oct 24 10:53:47.606: dot1x-packet:EAPOL pak rx - Ver: 0x1  type: 0x0
    Oct 24 10:53:47.606: dot1x-packet: length: 0x001F
    Oct 24 10:53:47.606: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Response sent to the server from 0x15000045
    Oct 24 10:53:47.606: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_RX_PACKET' on handle 0xE8000047
    Oct 24 10:53:47.606: EAP-AUTH-RX-PAK: Code:RESPONSE  ID:0x1   Length:0x001F  Type:IDENTITY
    Oct 24 10:53:47.606:     Payload:  47454E4552414C5C72616E64792E636F ...
    Oct 24 10:53:47.606:     eap_authen : during state eap_auth_idle, got event 1(eapRxPacket)
    Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_idle -> eap_auth_received
    Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response received by context 0xE8000047
    Oct 24 10:53:47.606: EAP-AUTH-EVENT: EAP Response type = Identity
    Oct 24 10:53:47.606: EAP-EVENT: Stopping 'Authenticator ReqId Retransmit' timer for EAP sesion handle 0xE8000047
    Oct 24 10:53:47.606:     eap_authen : during state eap_auth_received, got event 10(eapMethodData)
    Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_received -> eap_auth_method_response
    Oct 24 10:53:47.606: EAP-AUTH-EVENT: Received peer identity: GENERAL\randy.coburn.admin
    Oct 24 10:53:47.606: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_IDENTITY' on handle 0xE8000047
    Oct 24 10:53:47.606:     eap_authen : during state eap_auth_method_response, got event 13(eapMethodEnd)
    Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_method_response -> eap_auth_select_action
    Oct 24 10:53:47.606:     eap_authen : during state eap_auth_select_action, got event 19(eapDecisionPass)
    Oct 24 10:53:47.606: @@@ eap_authen : eap_auth_select_action -> eap_auth_passthru_init
    Oct 24 10:53:47.606:     eap_authen : during state eap_auth_passthru_init, got event 22(eapPthruIdentity)
    Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_passthru_init -> eap_auth_aaa_req
    Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_GET_PEER_MAC_ADDRESS' on handle 0xE8000047
    Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding Audit-Session-ID "C0A846660000004700DF6030" to RADIUS Req
    Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added Audit-Session-ID
    Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Adding IDB "0x070B90F8" to RADIUS Req
    Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Added IDB
    Oct 24 10:53:47.614: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_CUSTOMIZE_AAA_REQUEST' on handle 0xE8000047
    Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: eap_auth_aaa_authen_request_shim aaa_service 19, eap aaa_list handle 0, mlist handle 0
    Oct 24 10:53:47.614: AAA/AUTHEN/8021X (00000000): Pick method list 'default'
    Oct 24 10:53:47.614: EAP-AUTH-AAA-EVENT: Request sent successfully
    Oct 24 10:53:47.614:     eap_authen : during state eap_auth_aaa_req, got event 24(eapAAAReqOk)
    Oct 24 10:53:47.614: @@@ eap_authen : eap_auth_aaa_req -> eap_auth_aaa_idle
    Oct 24 10:53:47.614: RADIUS/ENCODE(00000000):Orig. component type = Invalid
    Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute hwidb
    Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-type
    Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-authen-service
    Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute clid-mac-addr
    Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute target-scope
    Oct 24 10:53:47.614: RADIUS/ENCODE(00000000): Unsupported AAA attribute aaa-unique-id
    Oct 24 10:53:47.614: RADIUS(00000000): Config NAS IP: 0.0.0.0
    Oct 24 10:53:47.614: RADIUS(00000000): sending
    Oct 24 10:53:47.614: RADIUS/ENCODE: Best Local IP-Address 192.168.70.102 for Radius-Server 192.168.19.121
    Oct 24 10:53:47.614: RADIUS(00000000): Send Access-Request to 192.168.19.121:1645 id 1645/21, len 288
    Oct 24 10:53:47.614: RADIUS:  authenticator F1 BA E5 31 71 54 BF 1A - A2 B1 5E 1A 63 72 1E 72
    Oct 24 10:53:47.614: RADIUS:  User-Name           [1]   28  "GENERAL\randy.coburn.admin"
    Oct 24 10:53:47.614: RADIUS:  Service-Type        [6]   6   Framed                    [2]
    Oct 24 10:53:47.614: RADIUS:  Vendor, Cisco       [26]  27
    Oct 24 10:53:47.614: RADIUS:   Cisco AVpair       [1]   21  "service-type=Framed"
    Oct 24 10:53:47.614: RADIUS:  Framed-MTU          [12]  6   1500
    Oct 24 10:53:47.614: RADIUS:  Called-Station-Id   [30]  19  "AC-F2-C5-75-7D-0D"
    Oct 24 10:53:47.614: RADIUS:  Calling-Station-Id  [31]  19  "64-31-50-0E-9B-00"
    Oct 24 10:53:47.614: RADIUS:  EAP-Message         [79]  33
    Oct 24 10:53:47.614: RADIUS:   02 01 00 1F 01 47 45 4E 45 52 41 4C 5C 72 61 6E 64 79 2E 63 6F  [GENERAL\randy.co]
    Oct 24 10:53:47.622: RADIUS:   62 75 72 6E 2E 61 64 6D 69 6E        [ burn.admin]
    Oct 24 10:53:47.622: RADIUS:  Message-Authenticato[80]  18
    Oct 24 10:53:47.622: RADIUS:   EE 52 4D ED B9 06 F3 CE 63 AC 9D 73 24 1B A7 ED             [ RMcs$]
    Oct 24 10:53:47.622: RADIUS:  EAP-Key-Name        [102] 2   *
    Oct 24 10:53:47.622: RADIUS:  Vendor, Cisco       [26]  49
    Oct 24 10:53:47.622: RADIUS:   Cisco AVpair       [1]   43  "audit-session-id=C0A846660000004700DF6030"
    Oct 24 10:53:47.622: RADIUS:  Vendor, Cisco       [26]  20
    Oct 24 10:53:47.622: RADIUS:   Cisco AVpair       [1]   14  "method=dot1x"
    Oct 24 10:53:47.622: RADIUS:  NAS-IP-Address      [4]   6   192.168.70.102
    Oct 24 10:53:47.622: RADIUS:  NAS-Port            [5]   6   60000
    Oct 24 10:53:47.622: RADIUS:  NAS-Port-Id         [87]  23  "GigabitEthernet1/0/13"
    Oct 24 10:53:47.622: RADIUS:  NAS-Port-Type       [61]  6   Ethernet                  [15]
    Oct 24 10:53:47.622: RADIUS(00000000): Sending a IPv4 Radius Packet
    Oct 24 10:53:47.622: RADIUS(00000000): Started 10 sec timeout
    Oct 24 10:53:47.622: RADIUS: Received from id 1645/21 192.168.19.121:1645, Access-Accept, len 66
    Oct 24 10:53:47.622: RADIUS:  authenticator 92 F6 07 AF C1 AB 0B 4C - 1D 9E A0 D1 01 36 27 26
    Oct 24 10:53:47.622: RADIUS:  Class               [25]  46
    Oct 24 10:53:47.622: RADIUS:   76 E3 06 66 00 00 01 37 00 01 02 00 C0 A8 13 79 00 00 00 00 00 00 00 00 00 00 00 00 01 CE CF F8 1F 7B 75 41 00 00 00 00 00 00 00 50          [ vf7y{uAP]
    Oct 24 10:53:47.622: RADIUS(00000000): Received from id 1645/21
    Oct 24 10:53:47.622: EAP-EVENT: eap_aaa_reply
    Oct 24 10:53:47.622: EAP-AUTH-AAA-EVENT: Reply received session_label 72000033
    Oct 24 10:53:47.622: EAP-EVENT: Received AAA event 'EAP_AAA_FAIL' on handle 0xE8000047
    Oct 24 10:53:47.622:     eap_authen : during state eap_auth_aaa_idle, got event 8(eapAAAFail)
    Oct 24 10:53:47.622: @@@ eap_authen : eap_auth_aaa_idle -> eap_auth_failure
    Oct 24 10:53:47.631: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
    Oct 24 10:53:47.631: EAP-AUTH-TX-PAK: Code:FAILURE  ID:0x1   Length:0x0004
    Oct 24 10:53:47.631: EAP-AUTH-EVENT: FAIL for EAP method ID: 1, name: , on handle 0xE8000047
    Oct 24 10:53:47.631: EAP-EVENT: Sending LL (Dot1x-Authenticator) event 'EAP_FAIL' on handle 0xE8000047
    Oct 24 10:53:47.631: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Received an EAP Fail
    Oct 24 10:53:47.639: %DOT1X-5-FAIL: Authentication failed for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
    Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Added username in dot1x
    Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] Dot1x did not receive any key data
    Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Processing client delete for hdl 0x15000045 sent by Auth Mgr
    Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] 6431.500e.9b00: sending canned failure due to method termination
    Oct 24 10:53:47.639: EAP-EVENT: Received get canned status from lower layer (0xE8000047)
    Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending EAPOL packet to group PAE address
    Oct 24 10:53:47.639: dot1x-ev:[Gi1/0/13] Sending out EAPOL packet
    Oct 24 10:53:47.639: dot1x-packet:EAPOL pak Tx - Ver: 0x3  type: 0x0
    Oct 24 10:53:47.639: dot1x-packet: length: 0x0004
    Oct 24 10:53:47.639: dot1x-packet:EAP code: 0x4  id: 0x1  length: 0x0004
    Oct 24 10:53:47.639: dot1x-packet:[6431.500e.9b00, Gi1/0/13] EAPOL canned status packet sent to client 0x15000045
    Oct 24 10:53:47.639: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Deleting client 0x15000045 (6431.500e.9b00)
    Oct 24 10:53:47.639: %AUTHMGR-7-STOPPING: Stopping 'dot1x' for client 6431.500e.9b00 on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
    Oct 24 10:53:47.639: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (6431.500e.9b00) on Interface Gi1/0/13 AuditSessionID C0A846660000004700DF6030
    Oct 24 10:53:47.648: dot1x-ev:[6431.500e.9b00, Gi1/0/13] Delete auth client (0x15000045) message
    Oct 24 10:53:47.648: EAP-EVENT: Received free context (0xE8000047) from LL (Dot1x-Authenticator)
    Oct 24 10:53:47.648: dot1x-ev:Auth client ctx destroyed
    Oct 24 10:53:47.648: EAP-EVENT: Received LL (Dot1x-Authenticator) event 'EAP_DELETE' on handle 0xE8000047
    Oct 24 10:53:47.648: EAP-AUTH-EVENT: Freed EAP auth context
    Oct 24 10:53:47.648: EAP-EVENT: Freed EAP context
    Oct 24 10:53:48.621: EAP-EVENT: Stopped EAP tick timer
    Oct 24 10:53:49.485: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to up
    Oct 24 10:53:50.491: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
    Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] Interface state changed to DOWN
    Oct 24 10:53:53.528: dot1x-ev:[Gi1/0/13] No DOT1X subblock found for port down
    Oct 24 10:53:54.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
    Oct 24 10:53:55.524: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to down

    Hi Jatin,
    See below the data that you have requested.
    show run bits.
    aaa new-model
    aaa authentication dot1x default group radius
    aaa session-id common
    clock timezone BST 0 0
    clock summer-time UTC recurring last Sun Mar 1:00 last Sun Oct 2:00
    dot1x system-auth-control
    interface GigabitEthernet1/0/13
    switchport access vlan 80
    switchport mode access
    authentication port-control auto
    dot1x pae authenticator
    spanning-tree portfast
    interface GigabitEthernet1/0/48
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 70
    switchport mode trunk
    radius server NPS1
    address ipv4 192.168.19.121 auth-port 1645 acct-port 1646
    timeout 10
    key thesecret
    ip default-gateway 192.168.70.1
    SW1-randy#show auth sessions interface gig 1/0/13
    Interface    MAC Address    Method       Domain          Status    Fg Session ID
    Gi1/0/13     803f.5d09.189e N/A          UNKNOWN      Unauth         C0A846660000002F00251DBC
    SW1-randy#Show mac address-table Interface GigabitEthernet1/0/13
              Mac Address Table
    Vlan    Mac Address       Type        Ports
      80    803f.5d09.189e    DYNAMIC     Drop
    SW1-randy#ping 192.168.19.121
    Type escape sequence to abort.
    Sending 5, 100-byte ICMP Echos to 192.168.19.121, timeout is 2 seconds:
    Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
    Here is a wireshark of the accept packet.
    Message was edited by: randy coburn
    Added wireshark trace

  • Java ME SDK 3.0 - Authentication failed error

    I'm running the Java Platform SDK 3.0 on Windows XP SP 2.
    I have built a MIDlet which I built and run on the emulator just fine, but when I transfer the .jar, .jad files to my cell phone and select 'Install' it fails and says:
    'Java error. Authentication failed'
    This code works just fine on Ubuntu using Sun Java WTK 2.5.2_01, so is there something I must do with the SJ ME SDK 3.0 IDE?
    Thanks for reading,
    Russell

    I believe it was because I had "Sign Distribution" selected under the Project Properties -> Signing.
    Thanks all.

  • Authentication Failed when trying to use Save As in the Firefox

    Hi,
    user tries to save concurrent request output (.txt) and gets 'Authentication Failed.' message in the file created.
    Same thing if he wants to see page source...
    I ran through firefox about:config, and found nothing special.
    browser.cache.disk_cache_ssl is disabled...
    Any ideas?
    Thanks!
    Kind regards,
    Kris

    Hi Carlo,
    thanks, tried all possible combinations of that property, but it did't work as hoped...
    When a page is loaded, it is cached so it doesn't need to be downloaded to be redisplayed. If the page changes after a previous visit, you may want to redownload it anyway to get the updated page. This preference controls how often to check for a newer version of a cached page.
    0-Check for a new version of a page once per session (a session starts when the first application window opens and ends when the last application window closes).
    1-Check for a new version every time a page is loaded.
    2-Never check for a new version - always load the page from cache.
    3-Check for a new version when the page is out of date. (Default)
    Found one workaround, but not totally ok:
    Right mouse click -> Select All
    Right mouse click -> View Selection Source
    File -> Save
    But there are HTML tags in saved file, and users don't want to edit the file...
    Regards,
    Kris
    Edited by: kristjan on Jan 24, 2013 8:49 AM

  • Policy Agent Authentication Failed!!!

    Hi All,
    I configured the Policy Agent based on Apache 2.055, and browsed server, it display 500 error code : Internal Server Error. The followings is the debug log,
    Error 900:7f2028 AuthService: AuthService::processLoginStatus() Exception message=[Authentication Failed!!] errorCode='107' templateName=login_failed_template.jsp.
    2005-11-15 14:04:38.093 Error 900:7f2028 PolicyEngine: am_policy_evaluate: InternalException in AuthService::processLoginStatus() with error message:Exception message=[Authentication Failed!!] errorCode='107' templateName=login_failed_template.jsp and code:3
    2005-11-15 14:04:38.093 Warning 900:7f2028 PolicyAgent: am_web_is_access_allowed()(http://exchange.hzliqun.com:8080/, GET) denying access: status = Identity Server authentication service failure
    2005-11-15 14:04:38.093 Debug 900:7f2028 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource http://exchange.hzliqun.com:8080/.
    2005-11-15 14:04:38.093 Info 900:7f2028 PolicyAgent: am_web_is_access_allowed()(http://exchange.hzliqun.com:8080/, GET) returning status: Identity Server authentication service failure.
    2005-11-15 14:04:38.093 Info 900:7f2028 PolicyAgent: process_request(): Access check for URL http://exchange.hzliqun.com:8080/ returned Identity Server authentication service failure.
    2005-11-15 14:04:38.093 Debug 900:7f2028 PolicyAgent: process_request(): returning web result AM_WEB_RESULT_ERROR, data []
    2005-11-15 14:04:38.093 Debug 900:7f2028 PolicyAgent: am_web_process_request(): Rendering web result AM_WEB_RESULT_ERROR
    2005-11-15 14:04:38.093 Debug 900:7f2028 PolicyAgent: am_web_process_request(): render result function returned AM_SUCCESS.
    Please help to sovle it.
    Any help will be appreciated.
    Thanks,
    Peter

    Looks like the agent can't authenticate. Check the AM URL and the amldapuser password. Check the amserver amAuthApplication and amComm debug files to see if there are any agent authentication related exceptions. If you have ethereal installed you can do a network trace to see the XML passed between the agent and the server

  • "Authentication Failed" and "Your session has timed out" messages

    Hi All,
    In our implementation, we are using Sun Access Manager 7.0 Patch 6. We noticed that sometimes when we enter invalid credentials, we receive "Authentication Failed" message which we understand is a correct behavior. But sometimes instead of "Authentication Failed", we get "Your session has timed out" message even though we did not go over the module timeout of 2 minutes(i.e. default timeout value in SUN Access Manager).
    Is this a known anomaly? Did anybody else have seen this kind of behavior?
    Thanks,
    Jaya

    I'm having issues too! Help!

  • Authentication failed Entourage doesn't support available authentication...

    I tried to set up and exchange account through Entourage. It works fine for receiving, but I cannot send through the account, I assume because I do not have a Certificated Authorization. So I tried to create a Certificate, since the help and instructions suggested such. This meant I had to create on in my Keychain.
    Well nothing worked, so I decided I would cheat and just create an account to send from Entourage using my exchange email account as an alias. The down side being exchange would not capture the "Sent" messages. Oh Well, I could live with that.
    This is when I started getting this error and Entourage would not send the message:
    "Authentication failed because Entourage doesn't support any of the available authentication methods."
    I eventually learned to go to the Keychain and try to verify the error and repair it. The error that appears on verification is:
    "Item “mail.bellsouth.net” has unspecified value for port attribute"
    Once the repair is executed, it shows it is repaired, but Entourage will still not send mail. So,...yes there is more...I decided to create an identical account to my working bellsouth account, that still works perfectly by the way, and the new account demonstrates the same problem and will not send, but all settlings are identical to my original POP3/SMTP account.
    Help! I do not have time machine running, but that is another issues, so lets see if I can fix this first.
    Thanks for whoever can come to the rescue!
    BarryCuda

    I believe this is a KeyChain issue, not an Entourage issue, but it is hard to tell. Can you tell? The reason I believe this is because I now cannot create an duplicate Account and have the KeyChain work properly with Entourage.
    I will post there as well, but please provide some guidance if you can. Where would I post KeyChain issue? I couldn't quite find a germane Forum.
    Sorry if I posted in the wrong place, but I have to start somewhere since it is not clear where the problem lies.
    Thanks,
    BarryCuda

Maybe you are looking for

  • Cannot add folder to Library

    HP6120 Windows XP Pro I used Winamp and have a Library of a view thausends songs. A view days ago I installed iTunes because I planned to buy an Ipod 80GB. I used the add folder to Library function and added the My Music folder to the library. Everyt

  • My iPod Touch 4g will not charge or sync

    I have plugged my iPod into 2 different computers (one mac, one PC) using 2 different Apple iPod cords and I cannot get the iPod to charge.  The computer does not recognize the iPod as being plugged in, so I cannot sync either.  Basically nothing hap

  • Help plz regarding array and DB

    hi , i have a problem regarding sorting. I have 1 million records in my DB table. When i open my swing application i sort the records in table [ORDER BY col1,col3,col4] like that and want that order record ids . upto here no problem.i am getting the

  • Need to make JTextArea scrollbar at top

    I've created a JFrameForm using GUI netbeans 5.0 When i created a JTextArea.. then i just put a lot of words inside it, then it'll automatically created a scrollbar there. The problem i face is when i try to execute it, the scrollbar is at the bottom

  • Acrobat XI Pro download message: Akamai - what to do next?

    I just bought Acrobat XI Pro for $400, but when I went to download, it says, "Akamai Download Manager 580.16 MB". So I downloaded this and it looks as though I never received Acrobat. Where do I find Acrobat?