Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP

I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500

Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages

Similar Messages

HT1600 my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Help: startup-config file open failed (Not enough space)

Who can help me ? I've an uc500 and he stil running. Now i want to change something and want to save the configuration first. But the following message appears : startup-config file open failed (Not enough space)
this is the output from a dir flash:
Directory of nvram:/
227 -rw-       25897                    <no date> startup-config
228 ----        1933                    <no date> private-config
229 -rw-       25897                    <no date> underlying-config
    1 ----          83                    <no date> persistent-data
    2 -rw-           0                    <no date> ifIndex-table
    3 -rw-         577                    <no date> IOS-Self-Sig#1.cer
    4 -rw-         615                    <no date> IOS-Self-Sig#2.cer
    5 -rw-         660                    <no date> vlan.dat
    6 -rw-         107                    <no date> cca.xml
    7 -rw-         586                    <no date> IOS-Self-Sig#3.cer
262144 bytes total (227094 bytes free)

OK.
Try this:
conf t
service compress-config
And see if that helps.
If not, see if you can tftp the running config off the router and TFTP it back to startup-config:
copy run tftp
copy tftp start
Then you can try a reload and see if it is cured.
I googled and found a few cases where alot of ACLs or NAT rules could cause MALOC errors (you would see those in your logs) when implemented and could manifest itself in this condition, which could be cured after the next reload, which is why I suggested that.
Of course, dont be remote when you do this and only do it during a maintenance window.
Steve

Good time of day! I can not activate your iPhone. Because I forgot password to bind to the device number. Kam I delete all reference to the device my apple id using the find iPhone! Thank you!

Good time of day! I can not activate your iPhone. Because I forgot password to bind to the device number. Kam I delete all reference to the device my apple id using the find iPhone! Thank you!

IF he can't remember his infomation he sold you a brick, get your money back and buy it from a retail store.

I have an iPod 5th gen. My audiobook playlists disappeared. They show as "on this device" in iTunes, but I cannot locate them on the device. Even the audiobook tab has disappeared. This happed after the most recent iTunes udate.

I have an iPod 5th gen. My audiobook playlists disappeared. They show as "on this device" in iTunes, but I cannot locate them on the device. Even the audiobook tab has disappeared. This happed after the most recent iTunes update.

- Delete all AB and resync
To delete all music go to Settings>General>Usage>Storage>Manage Storage>Audio Book (if present) and delete
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

I have an IPhone operating OS 4.21. I cannot back it up before update and I cannot set up an ICloud account as it needs to be on a version later on the device. Please help, I want to update but not lose everything!

I have an IPhone operating OS 4.21. I cannot back it up before update and I cannot set up an ICloud account as it needs to be on a version later on the device. Please help, I want to update but not lose everything!

SorchaH wrote:
I receive an error "Itunes cannot back up the IPhone because the back up cannot be saved on the computer".. So I tried to download and log into ICLoud but need to do this from my device..
That would tend to indicate a permissions issues on the computer.
Running an outdated version of iTunes is of absolutely no benefit.
All iDevices work with the current version of iTunes.

HT1414 forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

I forgot iphone 4 passcode and I cant restore when connected to my computer. I get a message that says cant restore until I turn off find my iphone for the device, but I did go into icloud and erased the device. help plz!

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

I am not being able to connect to another Apple device using the Face time what settings do i need to check.The device being used is an iPad mini

I am not being able to connect to another Apple device using the Face time.The device being used is an iPad mini.
The internet connectivity is perfect the wifi is even working.

'''plafstudiesdotc'''
You are welcome.
'''''So that other users can find answers that have worked, please take a couple of minutes to return to the forum, sign in and click "Solved" next to my answer. Thanks. '''''

Iphone 4 randomly came up with a grey screen showing 'ios6' and then said 'connect to iTunes'. However iTunes won't pick the device up and states there is an error with the device?

My iPhone was working fine yesterday and then showed a grey screen with the message 'ios6'. When I tried to use the phone it came up with the error message 'connect to iTunes'. When I got home from work I did this, at first iTunes could not detect the device and then it suggested a system restore. Once the restore had completed I selected the language, country/region and then came back to the same error message 'connect to iTunes'. When I tried to connect the device iTunes could not detect it and stated that there was a problem with the device.
I have telephoned my network provider to request a replacement device on my insurance but they have said they cannot authorise until I have had the fault diagnosed my Apple. Only problem is there are no genius appointments free until Friday!
Any help would be massively appreciated!

We're not Apple. Se can not magically make a genius appointment available for you.

Using a two separate 6534 cards I'm trying to code-up a simple test for my UUT (memory device). I need to write a pattern into the device and read back the pattern and verify it matches the value written.

I need the simplest method of using two 6534 cards for a memory (UUT) test. I want to write (byte-wide) a pattern (A5,5A) into the UUT, then read it back and verify it matches the value written. Things that change are: Address inputs (increment by 1 for each read/write) with the control signals (card 1) and data values written/read (card 2). If I detect a mis-match, the test stops, I read the location one more time and verify it's really incorrect, the correct value is written back into the same location just read, a counter is incremented to keep track of the tota
l errors detected and the test (memory read/verify) is resumed. Each time through the memory another counter is incremented to track the number of passes through the memory read test. The test should terminate when the operator hits the VI panel STOP TEST button.

Dave
Check out chapter two of the 653x User Manual for information on the different modes of operation. There it explains the difference between strobed and unstrobed I/O as well as Pattern I/O and Handshaking. It sounds as though unstrobed should work unless your UUT requires hardware timing or handshaking. You will have to keep track of errors in software however since the 6534 does not have any counters on it.
Brian

No battery detected but computer runs on the battery!

There is an X on the battery icon. When I check the power info, it states that there is no battery installed. However, when I unplug the power cord, the laptop obviously runs off the battery. I did remove the battery and leave it out a few minutes and then put it back in. No change in the icon.
Why is the battery not being detected but it is obviously charged and able to be used? Any ideas? My MacBook Pro is about 3 years old.

The battery is rarely ever used on this laptop. It sits on the desk and is only used there so I doubt the battery has gone through many cycles at all.
That is a big clue. More batteries in MBPs have problems from lack of use than nearly daily use. Please see this Apple article:
http://www.apple.com/batteries/notebooks.html
noting the section:
For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Apple does not recommend leaving your portable plugged in all the time. An ideal use would be a commuter who uses her MacBook Pro on the train, then plugs it in at the office to charge. This keeps the battery juices flowing.
Also review this excellent user tip:
http://discussions.apple.com/thread.jspa?threadID=1764220
At this point, you can help people help you by posting your battery stats. Do "About this Mac..." then click "More info..." This launches System Profiler, or "SP." In the left-hand pane, single-click "Poweer" and a bunch of power-related info shows up in teh main pane. Under "Battery Information are a number of things. Copy and everything in that section EXCEPT the battery serial number and paste into a reply to your own post. Then people can give you an idea of how to proceed, as that info pretty much tells all about the condition of the battery.

When Time Machine tries to back up to my Seagate HD before the HD is fully on, it fails. Then Time machine thinks it needs to back up the entire drive and there's not enough room. It won't just do the backup of new info now. Any thoughts?

When I try to do a Time Machine backup with my Seagate HD, and if I accidentally have Time Machine automatically on, it will fail if the HD is not fully on and recognized by the computer yet. But the problem is that when this has happened (twice now), it seems it loses all knowledge that it has backed up using Time Machine before and it will only try to back up the entire Mac HD to the Seagate. The Seagate already has 147 GB of data from prior Time Machine backups and I only need to backup the latest stuff since my last backup, but it won't let me do that. It tries to do the whole drive and it says it can't because there is only 135 GB of space left and it needs to backup 147 GB. Anyone know how to fix this and get it to start backing up again without erasing the drive and starting over? That's what I did last time. I erased the Seagate and then reset it as my Time Machine drive and it started working fine again until it failed and reverted to the problem. Thanks

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included—anonymize before posting.

TS3367 We have one Apple I'd and multiple devices, and are not getting FaceTime to work between the devices on the same id

We have one apple I'd with multiple devices and FaceTime will not work between them?

Put separate email addresses (free gmail) on each device.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

A file or device required for the operation of Sound 1 does not exist or is used by another process, or you have no permission to access it. The virtual machine will continue running, but the device will be disconnected.

I encounter this error using OSX version 10.8.2 running Parallels Desktop 8 For Mac (Build 8.0.18345 Revisiopn 820589, November 25, 2012) runing a MacBook Pro using a Thunderbolt Display.
The Thunderbolt Display Sound does not function when Parallels Deskop is running

cherholdt wrote:
I encounter this error using OSX version 10.8.2 running Parallels Desktop 8
Then you should probably post your question on the Parallels forums: http://forums.parallels.com

Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP

Similar Messages

Maybe you are looking for