"Authentication failed. Please verify your username and password"

I have tried to email using the updated version of Adobe Reader. However, everytime I try this is the message I get. My username and password have worked everywhere else why not on here? I am getting very frustrated. It's bad enough I am trying to learn Windows 8 but now this!!!

LisaM60 wrote:
I have tried to email using the updated version of Adobe Reader.
Using what - SendNow? Can you login at Acrobat.com ?

Similar Messages

Ical "authentication failed. your username and password were rejected by the server"

i've a pretty busy server, fully configured with correct DNS.
running 10.6.8, uptodate. i've stopped the ical service, and removed it from the server settings.
then i created a folder on my RAID /volumes/raid/ical, set its ownership to _calendar:_calendar (uid 93), rwx,rx,-
then added the iCal service back, and set the data store to this new folder.
authentication is set to digest (to reduce potential kerberos errors), with SSL on.
i then started the service
an existing user CANNOT connect to the caldav server. i get the error: ical "authentication failed. your username and password were rejected by the server".
if i create a NEW user, that user can correctly connect to the Caldav server. On first joining, an entry is created in the __uids__ folder and the calender works.
SO. WHAT IS GOING ON?
this is 10.6, so i do not have an option in WGM to 'enable calendering'. i've used the inspector to check for differences, but i can't see any.
help. please. and no comments about DNS. the fact i can get a new user to function means that is excluded. no comments about SSL. ditto. no comments about kerberos, its turned off. thanks.

I often think of things in terms of time it takes to figure out the solution to the problem vs time it takes to nuke and pave.
Dare I ask... How many users would you have to remake?
150 users would probably take 2 hours to recreate?
...Have you spent 2 hours on this problem yet? How about 4 or 6?
Perhaps you could have typed up 450 remade users so far!
I have a great idea as to how to change ownership of home folders to users after they're created.
Thoughts on the problem... (but don't spend too much time on it!)
What about crypt vs open directory password?
In WGM, select the user, click the advanced tab, and ensure that your users have OD based passwords?
...sometimes that pull-down menu displays OD, but it's not really. Try selecting OD, retype the password there, and save.
See if it works.
What about in server admin.... Select the server in question, click the access button at the top.
Ensure that your services are allowed for all users to use the iCal service.
In the iCal service in Server Admin...
Host name setting? It's a stretch as new users seem to work. Ensure it's correct?
For the sake of argument... Change authentication type to Any Method... If you're running OD on the server, Kerberos is running. I know that certain services require it even though you have the option. Perhaps iCal is being finiky without it?
I apologize if you've tried all these, but as a user forum, you'll typically get users that don't believe that you've tried the basics. It's honestly the best place to start. Seeing as we don't know what you've done, it's the best advice you'll get.
HTH
-Graham

Every time I try to download a game on my iPad it says please verify your account and follow the intrustion now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this pla

Every time I try to download a game on my iPad it says please verify your account and follow the instructions now I have a email n password set up and every time I click send it to my email there is nothing how do I acces this please

Hi Mark ohara,
Welcome to the Support Communities!
The following articles will help you with your Apple ID verification:
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account. You will be prompted to verify your email address.
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
I hope this information helps ....
Have a great day!
- Judy

Verifying a username and password against SQLServer 2000 dbase via servlets

Hello everyone,
I sent a message earlier on. I'm really sorry if I sounded rude. Actually Im working on a school project an it involves a bank application. I have created a registration page that saves information in a database table already created on my computer. I have also created an HTML page in wihich registered users can log in. I am trying to verify the username and password against the database table tagged "Register Customer Information" but when I click on the login button, I get an SQL exception that says "invalid column count or syntax error". Please can anyone help me out? I would really be grateful. Thank you so much. The code for my servlet is this:
* LoginConfirmationServlet.java
* Created on January 24, 2007, 11:32 PM
package org.me.RegisterCustomerInformation;
import java.io.*;
import java.net.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
* @author HP COMPAQ
* @version
public class LoginConfirmationServlet extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
String use=request.getParameter("usernname");
String pas=request.getParameter("passwword");
if((use!=null)&&(pas!=null))
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:MyDSN","sa","");
ps=con.prepareStatement("select UserName,Password from RegisterCustomerInformation where UserName= ? and Password=?");
rt=ps.executeQuery();
while (rt.next())
String u=rt.getString("UserName");
String p=rt.getString("Password");
if (use.equals(u)&&pas.equals(p))
out.println("Welcome:"+use);
else
out.println("Your login information is incorrect.");
out.println("Please check to ensure your username and password is entered correctly.");
out.println("Thank you!");
con.close();
catch(Exception ex)
out.println("Error:"+ ex.toString());
/*out.println("<html>");
out.println("<head>");
out.println("<title>Servlet LoginConfirmationServlet</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet LoginConfirmationServlet at " + request.getContextPath () + "</h1>");
out.println("</body>");
out.println("</html>");*/
out.close();
The html fields names are:"usernname" and "passwword" respectively. I'm making use of the POST method and the servlet name is LoginConfirmationServlet. Please I would really be grateful if any one can help me out. Ive not been able to run this for the past few days. Thanks.
}

You did not supply values to UserName and Password. You have created preparedStatement object with sql query with ? marks for UserName andPasssword. Assign the values what u got from the form using setProperty(int index) method of preparedStatement and try.

HT201320 when i feed all details in mail like username and password than i click on sign-in option it shows your username and password incoreect but username and password is correct?

i did not able to use mail. i go to add account and where i am given all the details correct like username and paasword but after i click on sign-in option it shows your username and password is incorrect...

You only think the username and password are correct; when you create an account the phone asks your mail provider to validate the username and password, and if it fails you get that message.
You know that you must enter a username and password twice, once for incoming and once for outgoing mail?

Claims Based Authentication SPSecurityTokenService.Issue() failed: The security token username and password could not be validated.

Please excuse the lousy table...Its late :-)
I have a multi-server SP2010 farm. Patched up to
Configuration database version: 14.0.6106.5002
My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configured the servers exactly to MSDN and technet specs (following this spec to the
letter (
http://technet.microsoft.com/en-us/library/ee806882.aspx) to allow the forms side of the web app to authenticate to ADAM.
IT WORKS IN DEV!!! , which is a single server farm. However, it does not work in production. I get the following:
Claims Auth log entries:
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
f2ut
Verbose
Authenticated with login provider. Validating request security token.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Using membership provider 'ADAMProvider'.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Doing password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Failed password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Unexpected
Password check on '[email protected]' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security
token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
fo1t
Monitorable
SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password
could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
fsq7
High
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
  at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
8306
Critical
An exception occurred when trying to issue security token: The security token username and password could not be validated..
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
f2un
Verbose
Form authentication failed.
I have tried EVERYTHING (well, nt everything, I don’t have the fix I suppose).
I found plenty out there and nothing directly correlates with this issue.
I searched on all parts of the errors I got.
This contains an interesting blurb about setting up access for the apppool id correctly.
That’s not the case for me. It works in dev and the same id are used there.
http://sharepoint-2010-world.blogspot.com/2011/03/adam-forms-based-authentication-in.html
This was good but it doesn’t give specs on what the environment looks like:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/557143a6-4b36-4939-bb7f-d62a9335fd18
The was interesting…but I am patched up beyond the June 2011 CU so it’s a moot point:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/9b8368ef-c5e5-4ead-b348-7b2b5587cfc8
Any and all help would be greatly appreciated!

Hi.
You say its a multiserver farm, do you have more than one web server then?
If thats the case, have you tried accessing the site on each server directly?
Found this for you, maybe that can help?
Troubleshooting Exceptions: System.ServiceModel.FaultException`1
http://msdn.microsoft.com/en-us/library/bb907220.aspx
and this:
SharePoint 2010 Claims Authentication - The security token username and password could not be validated reoccurring every morning
http://social.technet.microsoft.com/Forums/pl-PL/sharepoint2010setup/thread/383f1f9b-5c4a-4e19-b770-2a54b7ab1ca1
and
This seems to be a good guide:
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
Good luck
Thomas Balkeståhl - Technical Specialist - SharePoint - http://blksthl.wordpress.com

What happens if you go on Twitter, click a phishing site, give your username and password to it (because you never knew) can the hacker also hack into your iPod Touch 4th generation?

Okay, so I went on Twitter and some chick replies to a tweet and she sent me a tweet going like 'you guys were doin what here, looks confusing' then sends me a link. There was no tweet conversation or anything but being an idiot, I pressed the link (I was on my iPod Touch and it's 4th gen) and it got some 'time session ended' or whatever. Again, being the idiot and regretting it, I typed my Twitter username and password. Then it showed some 'cash' thing I don't even know. I searched it up, it was a phishing site and I changed my password for the third time. I hope you're still reading this because I'm very desperate for help. If I did press it, will the hacker hack my iPod too? Thanks! xx

Nope, they can't hack you iPod. The can (or could) log into your twitter account and change the password so y no longer control the site.
If you used the same password for other sites/serves change those too.
You might also want to change other information information in the twitter account like secret questions/answers since maybe they already logged into your account to steal that data and plan to use that information at a later date.

Configuration could not be verified - My username and password are correct!

I am trying to add a second gmail account to Thunderbird, but without success. The first addition went flawlessly.
Now that I'm attempting the second, I am confronted with the error message "Configuration could not be verified - is the username or password wrong?"
Answer = no. I have verified them by logging into gmail.com with IE several times, and made sure to log out afterwards to ensure no conflict. I do not use two-step verification with either accounts. I have tried to 'fool' google's email servers by capitalizing the outgoing SMTP letters (so as to differentiate from the previous login smtp letters), but thunderbird does not permit capitalization.
I have not found any other *solved* forum posts that can help me with this problem. I'm running Windows 8.1 and Thunderbird 31.2.0.
This is a call for help.

Same problem for me, too. It happens on my iPad, iPhone, and iMac. Weird because I have great Internet connectivity and I can log into and view my iTunes account. I've downloaded three new apps with no problem. But my iPad shows 14 apps needing updates, my iPhone shows 2, and my iMac shows 1. In all cases, clicking on "update" and entering the password results in the message, "Cannot connect to iTunes Store". It's the same result across multiple WiFi networks, even after resetting them.
I'll see if someone at the Genius Bar can help and then I will repost.

I don't like it when webbrowsers keep passwords and usernames in their system. for example gmail, you type in your username and password and it remembers it. i don't know how to undo this.

In gmail, you would normally only see the accounts' name if you typed in the first letter of it and it pops up all the emails logged in on that computer with the first letter. Mines a B, but that's easy for anyone to know if they have my email. I would really like it if someone could help me fix this password/username lock thing.

I don't suppose it makes you any happier that you just need to double-click rather than guess the first letter of the user-id.
The user-id is remembered in cookies. You can remove cookie through Tools > Options > Privacy
The password connected to a user-id is collected upon successful use and clicking on yellow security bar. You can remove password through Tools > Options > Security
If you have a Master Password then it will restrict additions and deletions of passwords until a Master Password was entered for the session. Changes to the master password or show passwords require additional entry of master password at time of use.
If you don't want cookies or passwords saved because other have access to your computer that is what Private Browsing ("Ctrl+Shift+P") is for
Anyone with physical control of the computer owns it.
Possibly relevant:
* Cookies - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Cookies
* Master password - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Master_password
* User name and password not remembered - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/User_name_and_password_not_remembered
* Locked or damaged places.sqlite - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
* Private Browsing | How to | Firefox Help<br>https://support.mozilla.com/en-US/kb/Private%20Browsing

Your payment authorization failed. Please verify your information and try again, or try another payment method.

Thats the exact notification appears when i try to purchase on apple online store in the philippines. Im just wondering why it declined my debit card that im pretty sure it has enough funds to purchase an ipad air 128gb / sim. Coz the bank confirmation emailed me that the amount was successfully transfered to my debit card. But i tried to buy an apps its okay but when buying at online store even ipod touch i cant buy coz it will reject my card. Last time i used this for purchasing an ipad mini & it was successful. How to solve this acct.? Coz i wont use any credit card online.
Really thanks ahead.
Bernard

http://store.apple.com/us/help

"Your username and password are incorrect or your account does not have access to Edge Inspect CC"

When I start the Windows App, I get this alert and Edge Inspect CCcloses itself (on Windows 8.1, 64 Bit). But my Creative Cloud App is working fine and is logged in correctly.
Is there someone, who knows a solution? How can I check, which account details edge inspect is using?!

Can you drop me an email with your Adobe ID (the email you use to log in). I'll check on it for you - [email protected]
(And I just need the email address, NOT the password )
=Ryan
[email protected]

Login failed .Please verify your login information or contact the system ad

Oracle EBS Version:Oracle R12 12.1
Database :11.2.0.1
OS:IBM AIX 6.1 Power system
After cloning of production system . We are not bale to login.
Apart from this we are also getting the below error while validating the FND_WEB_SEC.VALIDATE_PASSWORD
Oracle error -449: ORA-00449: background process 'MMON' unexpectedly terminated with error 448 has been detected in FND_WEB_SEC.VALIDATE_PASSWORD.

953053 wrote:
Oracle EBS Version:Oracle R12 12.1
Database :11.2.0.1
OS:IBM AIX 6.1 Power system
After cloning of production system . We are not bale to login.
Apart from this we are also getting the below error while validating the FND_WEB_SEC.VALIDATE_PASSWORD
Oracle error -449: ORA-00449: background process 'MMON' unexpectedly terminated with error 448 has been detected in FND_WEB_SEC.VALIDATE_PASSWORD.Please see these docs.
Oracle Error -449: ORA-00449: Background Process 'MMON' Unexpectedly Termination When Changing Application Password [ID 1451851.1]
OERR: ORA 449 background process <name> unexpectedly terminated with error <n [ID 18448.1]
Database Crashes With ORA-00449 and ORA-00601 [ID 730287.1]
BACKGROUND PROCESS DIES, NO TRACE FILE GENERATED [ID 1029808.6]
What scenarios can occur if a disk space is exhaused for drives containing Alertlog, Core Dump Or Tracefiles [ID 433852.1]
Thanks,
Hussein

'Please enter the username and password for this s...

Hello,
ever since we have Bt broadband there have ben problems with the email account and this d****d pop-up! No matter what I do to the box , it keeps coming back. Then the account works fine for a while until it decides to appear again. I can have a whole week without it then a whole week with it appearing every few seconds. It has got worse today. Then Bt broadband help will pop up and say there are issues with the email account. I ask it to fix it and it goes through its procedure and comes back with no issues found! Finally this morning I had had enough and contacted the live chat. The man at the end of the line took over the computer, did not know what he was talking about and took me an hour to undo the damage he had done! He did say though that there were issues with Outlook 2010 and bt mail. I wonder if anyone else has suffered the same issues and solved them or if anyone knows of any conflicts between Outlook 2010 and bt mail? I'm at my wits end and bt is no help with its overseas, script driven help line! All my settings are fine as it happened with a second account that the 'chat' man set up and nothing happens with another account that I have with Virgin.
Thanks ... Louise.

eddielouise wrote:
Hello,
ever since we have Bt broadband there have ben problems with the email account and this d****d pop-up! No matter what I do to the box , it keeps coming back. Then the account works fine for a while until it decides to appear again. I can have a whole week without it then a whole week with it appearing every few seconds. It has got worse today. Then Bt broadband help will pop up and say there are issues with the email account. I ask it to fix it and it goes through its procedure and comes back with no issues found! Finally this morning I had had enough and contacted the live chat. The man at the end of the line took over the computer, did not know what he was talking about and took me an hour to undo the damage he had done! He did say though that there were issues with Outlook 2010 and bt mail. I wonder if anyone else has suffered the same issues and solved them or if anyone knows of any conflicts between Outlook 2010 and bt mail? I'm at my wits end and bt is no help with its overseas, script driven help line! All my settings are fine as it happened with a second account that the 'chat' man set up and nothing happens with another account that I have with Virgin.
Thanks ... Louise.
Hi Louise, welcome to the forums.
There is no issue with Outlook 2010 - in fact there are no issues with pratically any mail client. The issue is down to the yahoo mail servers solely, particularly the backend mail server farm mail.btinternet.com.
Over the past couple of months they seemed to time out, reject access and all sorts of things for different users and different user accounts at different times.
You may like to try altering the Outlook account settings yourself to enter the details I've written via my shortcuts option 0d/h. See how you get on with that.
Also you may like to stop Outlook checking every few minutes, assuming you've got that option set. Hence do a manual send/receive at your own leisure.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Got a new MacBook pro but for some reason I can't connect to my schools wireless. It doesn't have a problem connecting to any other wifi. My schools network is unsecured all you do is login with your username and password but the window never loads

I jus got a MacBook pro and Im having trouble connecting to my schools network. It is not secured and only requires to login with school id. A Window pops up to sign in but it never loads anyone know why I'm having this problem? Doesn't have a problem connecting to any other wifi

"This is a flaw in OS X Lion. It does not want to connect to open WiFi that has a login page that open in a browser."
Nonsense, no problems logging in at sites that you mention. I use OpenDNS servers. For the OP try:
System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and insert the following:
208.67.222.222
208.67.220.220
Then click OK, then click Apply.

I'm being asked for a password with the following statement: The proxy moz-proxy://192.168.30.5:800 is requesting a username and password. The site says: "moz-proxy://192.168.30.5:800"

Here's an example of what happens when I cancel the username and password request:
ERROR: Cache Access Denied
Sorry, you are not currently allowed to request:
http://cben.net/?
from this cache because your username and password are incorrect or your user group does not have permission to web browse. Please check your username and password. They are case sensitive so make sure Caps Lock is not on.
This happens 100% of the time.

I have the same problem. It ask for all elements that proxt detects ("NetworkError: 407 Proxy Authentication Required").
Solution "No proxy" not works because i aslo require internet.
I have version 10.0.2 on windwos XP, and this happens to me since I update it. On chrome and ie works without prompt.
I upload and example, this page calls facebooks elements (i can't acces facebook) and others, for each element prompt proxy is shown.

"Authentication failed. Please verify your username and password"

Similar Messages

Maybe you are looking for