Authentication failure after upgrade to 10.4 Server

I have upgraded Xserve from 10.2 server to Tiger 10.4. The server does not log on after installation.

I'm having similar problems and hoping someone has found a solution.
I'm on Leopard now (10.5.1) and have recently configured SNMP so that I can monitor a server (MacPro tower). It appears that SNMP is working fine at the command line. For example, I can run a status easily enough:
ra:~ administrator$ snmpstatus -c public localhost
[UDP: [127.0.0.1]:161]=>[Darwin ra.local 9.1.0 Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386 i386] Up: 0:24:37.39
Interfaces: 6, Recv/Trans packets: 43993/43404 | IP: 44772/42918
2 interfaces are down!
However, Server Monitor simply keeps giving me this:
1/27/08 12:42:48 PM: Failed to contact server
1/27/08 12:43:00 PM: Failed to contact server
1/27/08 12:43:12 PM: Failed to contact server
I've also noticed a problem with hwmon, apparently:
ra:~ administrator$ sudo /usr/sbin/hwmond
hwmond will NOT run on this platform.
Huh. Very peculiar. So, from what I can tell, it seems like SNMP is running and should be (probably is) responding, but Server Monitor is not getting in. I'm not familiar with Server Monitor, but one thing I noticed is that if I try to run an SNMP status without specifying an appropriate community, I get a similar result as Server Monitor:
ra:~ administrator$ snmpstatus -c notARealCommunity localhost
Timeout: No Response from localhost
So, what community does Server Monitor use? Is there a way to change it? Is there somewhere that I can get a default SNMP configuration file that would work with Server Monitor?
Any help would be appreciated.

Similar Messages

[SOLVED]X start failure after upgrade: dri3,present modules missing

I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
(EE) Server terminated with error (1).Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Xorg.log.0 :
[51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
Installed packages (EDIT: completed):
xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
intel-dri 10-2.7-3
dri2proto 2.8-2
dri3proto 1.0-1
xf86driproto 2.1.1-3
Linux 3.15.5-2-ARCH i686
Linux CK Atom 3.16.2-1
Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
Atom netbook
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Some refs :
» [SOLVED] X start failure after upgrade https://bbs.archlinux.org/viewtopic.php?pid=1426837
» [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
Last edited by kozaki (2014-09-12 09:45:53)

The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
same issue if:
- Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
- Adding Option "DRI" "False"
Digged a bit:
- same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
- same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
Last edited by kozaki (2014-09-11 11:05:42)

HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

Activation issues are almost always the result of a device that has been hacked or jailbroken.
If this is the case, no support can be provided here.

Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
Thanks, Howard

I upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected

Logon failure after upgrade Windows 2003 domain functional level and schema

Before upgrade:
Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: Authentication: Windows AD
Logon OK.
After Upgrade:
Windows 2003 Std + Windows 2008: Domain functional level 2003, Schema verion 44
Crystal Report XI R2: Authentication: Windows AD
Logon Error: An error has occurred: java.lan.NullPointerException
Is it a Tomcat problem? OR Java runtime problem? OR XI R2 problem?
Anyone can help to fix it!? Thanks!!

OK, I try again in the testing lab and simplify the combination. We only consider Windows 2003 ONLY.
Before AD upgrade:
AD/Domain Controller: Windows 2003 Std server: Domain functional level 2000, Schema verion 30
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Upgrade cmbination 1
Step 1:
Upgrade Domain controller: Windows 2003 to Windows 2003 R2 (Domain functional level 2000, Schema verion 31 )
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon OK.
Step 2:
Upgrade Domain Functional Level: Windows 2003 R2 (Domain functional level 2003, Schema verion 31)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
Upgrade combination 2
Direct upgrade Domain Functional Level: Windows 2003 (Domain functional level 2003, Schema verion 30)
Crystal Report XI R2: run on Windows 2003 memeber server
Operating OS: Windows XP/Vista/7: Authentication: Windows AD
Logon Fail
Logon Error: An error has occurred: java.lan.NullPointerException
In this testing, we can conclude that the Domain Functional Level upgrade from 2000 to 2003. The MI logon will fail.
Q1. Crystal Report XI R2 cannot run on Windows 2003 server (Domain Functional Level: 2003)?
Q2. If Crystal Report XI R2 can run on Domain Functional Leve: 2003, how to fix our problem?
Do you have any idea to help us? Thanks!
Edited by: Initiator on Jul 20, 2010 6:22 AM

[Solved] Boot failure after upgrade to udev 0.84

After upgrading my system it no longer boot properly.
The kernel boots fine. Initrd executes and the normal init starts.
First of is the start of udev. This starts and immediately complains that nss_ldap is unable to contact the ldap server. Not very strange when networking isn't started yet.
After a little while and a few repetitions of the nss_ldap error message udev says its done.
After this activating swap fails but mounting Root readonly succeds. After this init proceeds with "Checking file system". This fails miserably saying "no such file or directory /dev/sda3" which is the previously mounted root filesystem.
It seems like udev gets busy when not able to connect to the ldap server and hence doesn't create the device nodes for my harddrive in time.
Because the check of the filesystem fails i end up on a rescue prompt. And when logging in to that and check /dev the sda* nodes are there.
Does anyone have a clue on how udev depends on nss_ldap? Any other thought on whats going on?

Ok, after some investigation it turns out that it seems like udev starts a few /sbin/vol_id on the disks/partitions attached. These processes in turn triggered nss_ldap which couldnt connect to the remote ldap server due to network not being up.
I have a less than beautiful solution to the problem. Altering nss_ldap to do soft binds instead of the default that is hard binding. When using hard bind and connect fails it uses an exponential backoff and tries again a little later. Changing to soft bind makes nss_ldap returning immediately when failing.
To change this edit /etc/nss_ldap.conf and change the line saying something like
#bind_policy hard
to
bind_policy soft
This at least helped me getting a system that boots again.

Authentication error after upgrade to APEX 4.2

Hi,
After the upgrade to Apex 4.2, I started to receive an error when trying to run the application.
ERROR: "There is no authentication configured for this application. ORA-01403: no data found".
I checked and double checked the authentication options. Everything seemed fine. Tried several tricks. No success.
Then I didn't bother much. I just recreated the application (that is - created a copy of the application) and got rid of this error. Then deleted the application that wouldn't run and kept the new one. Everything works fine now.
Was there an option that I had missed? What would have been a "polite" way to get rid of this error?
M
Edited by: user1671420 on 2.09.2012 13:11
Edited by: user1671420 on 2.09.2012 22:55

Hi,
I had the same issue after upgrade, using a Custom Authentication Scheme (LDAP).
Debugging and adding logs indicated that the session was being processed correctly, but to "nobody", therefore raising the "Invalid Login Crednetials" message.
At a total loss for ideas, I started changing URL parameters on this authentication scheme (after having deleted the login page, recreating and even re-importing, changing processes etc etc), applied the changes and it worked.
Not fully understanding why slight changes worked, I reverted the changes, clicked on "Apply Changes" and it worked as well.
This led me to believe that the actual Authentication Scheme was decompiled, or needed to be re-validated somehow. I tested this on other applications that use the same scheme (but were also inaccessible), and it worked.
Edit Application --> Edit Application Properties --> Security Tab --> Define Authentication Schemes --> "Edit Current Scheme" --> Don't make any changes, Simply click on "Apply Changes"
I hope this helps anyone who might be having the same issue.
Kindly,
James

Error Starting Certificate Authority after upgrading in place from Server 2003 Enterprise (32 bit) to Server 2008 Enterprise (32 bit).

Hope this is the place to seek help with Active Directory Certificate Services. We recently upgraded in place an issuing CA in our lab from 2003 to 2008 and the upgrade of the OS was successful but the CA service now will not start.
The error is:
Error 0xc8000222 (ESE: -546)
More info. We did stop the CA service prior to doing the upgrade.

Answering my own question with the hopes to help someone else.
The problem has something to do with the logs for the certificate database. There is some sort of a format conflict after upgrading to 2008.
To get around this error, and get the Certificate Authority service to start, remove all the logs from the C:\Windows\system32\CertLog directory that should be where your .edb database file lives, leave the database file there
This worked for us on three of four of our CA servers, the other one had a database that went down in a dirty state, so we had to use ESEUTIL utility to fix the database.
NOTE: there is no ESEUTIL utility on the CA servers, so we had to copy our database to an Exchange server in our test lab, then run ESEUTIL /MH to see what the Status is, it may say Dirty or Clean, then we ran ESEUTIL / P (P for Repair, go figure I know
right) anyway that fixed the database, so we copied it back over to the CA and started the service
hope this helps some of you out, we have a case opened with Microsoft Technical Support on this issue and will update this thread with their feedback as well once they get back to us (it has been a week already)

The calendar app on MacBook won't recognize and sync with IPad and Iphone after upgrading to Yosemite and Server 4.0

After upgrading to Yosemite on our mac mini (from OS X 10.9) and V4.0 to Server (from 3.2), the calendar app on MacBook won't recognize the account and won't sync with IPad and Iphone. Even after giving password over and over again. I get the following message:
De server reageerde met
'500'
op de bewerking 'CalDAVAccountRefreshQueueableOperation'.
(Server responded with '500' on task 'CalDAVAccountRefreshQueueableOperation'
Anyone idea?

update to my original post: after searching since for the past 10 days - I did want to pass along to others with an iphone calendar sync problem the following resource:
Mac OS X: Resetting the SyncServices folder
http://support.apple.com/kb/TS1627
This is the preferred solution for problems with sync with calendar and other apps between iphone and MaciOS. This did solve the problem which developed that no items from iCal were copying to Iphone, such as new calendars I would add, but the original problem has not been fixed by this reset.

Safari Plug-In Failure after upgrading Flash Player

I've got OS X 10.9.2, Maverick, running on my iMac, and Safari 7.0.3.
Today I upgraded Flash Player to 13.0.0.182 version.
After upgrading I starting receiving the error message "Plug-in Failure" in every page I opened with video broadcasting, such as Youtube for instances, and no videos would be displayed anymore.
I already reinstalled Flash Player, rebooted my machine, have all plug-ins enabled in Safari Preferences, but no success whatsoever.
Think the solution could be downgrading to the early version of Flash Player, but have no idea how to do that now, since the Adobe site only allows me to UPgrade and not DOWNgrade.
Could anyone help me with this?
Many Thanks...

From the menu bar, select
 ▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test.

Visual voicemail failure after upgrading to ios 7

I see MANY people having trouble with visual voicemail failing after upgrading to iOS 7. It appears across many carriers. In my case, my wife and I have the same phone model and carrier. I upgraded to iOS7 and VVM stopped working. My wife did not and hers still works. VVM is a nice feature so I don't have to manual call and do the keypad stuff. It is also nice that I get the visual indication when there is a new VM.
After trying a few things from various forums, I stopped by the ocal Apple Store and got help at the Genius Bar. We tried a number more things without success - hardware diagnostics, various resets, changed VM password, etc. The next step was to do a Reset->Erase all content and settings. However, it so happened another customer was in with the same issue being helped by another tech. This customer was on a different carrier. So I left with the agreement from my tech he would contact me with the results so I did not needlessly wipe my phone. Have not heard back.
This seems pretty clearly an iOS 7 issue. I wonder if anyone has gotten a clear answer on whether this is a known defect being worked.
Thanks

If you have performed all of those troubleshooting steps, I would next call the carrier and ask them to reset your voicemail and reset your password. This should take care of it on the phone.

Trackpad failure after upgrading to X

After upgrading my 13" macpro, the trackpad would randomly fail when I was doing commands like switching desktops, mission control, or dashboard. Not always, but randomly, like it was going fine, but after I woke it up from sleep, it just didn't work out. Other trackpad gestures in a single desktop were fine however.

You and me both. No trouble with a trackpad after three plus years with Leopard, Snow Leopard, and Lion. Mountain Lion breaks my trackpad to the point where I can only hold the power button and press enter to shutdown. I cannot select or click anything with the left or right side of the trackpad. Neither the "tap tp click" nor the "full physical push works with either on my mid-2009 Macbook Pro, aka MacBookPro5,2. Happens after every wake from sleep.
Frustrating and disappointing. Is there a KB article regarding this? It happened immediately after the Mountain Lion upgrade and was not expereienced before.
Ran repair permissions after upgrade. Advice? SMC (PRAM) reset?
Thanks,
fellow

Airport Card failure after upgrade to OSX 10.5.6

My airport suddenly down after upgrade to OSX 10.5.6.
It showing "airport card not installed". I work very well in the past 8 moths before upgarde
Any one has same problem ? How can I re-install the Airport card (DIY)
Great thanks
My Macbook is late 2007 with 2.2G (4GB ram)

Hi,
Look at this link http://www.macfixit.com/article.php?story=2005093011343164
Rgrds

Synchronization failure after upgrade to Desktop Software v.7.0

When trying to synchronize with Outlook after upgrade to Desktop Software v.7.0 got a message "CRADSDatabase ERROR (5211): There is an error converting Unicode string to or from code page string". The other options like device backup, synchronization of images and videos, file transfer, work fine. I am on BB Bold9700 (v.6.0, 2949) and Sony Vaio with Windows 7. The direction of synchronization does not matter and the same error pops up when e.g. only Tasks are attempted to synchronize.  There were no problems with Desktop Software v.6.

Hello again.
I have a few ideas...including the registry cleansing that you did not do, along with the other things in that thread that you may have skipped over.
In addition, hHere is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

After upgrading to 10.9 Server 3 XMPP server does not accept account with domain instead of FQDN

Hi,
I've had this issue before when upgrading to 10.8 from 10.7. The issue is that my previous working jabber ID ([email protected]) stops working and I can only login to the XMPP server using [email protected] In previuos upgrades, all I had to do to fix the issue was to re-add the domain witrh the serveradmin tool, adding it to the jabber:hostsCommaDelimitedString.
#serveradmin settings jabber:hostsCommaDelimitedString="host.domain.com,domain.com"
In 10.9 this does not work. Both host and domain entries are already in the config but I still can only login when changing my JID to be [email protected]
Any hints?
Regard,
//Staffan

Solved it myself! It seems like the #serveradmin script for modifying / adding the domain aliases to the ejabberd server does not work correctly. After looking through the different sm_.xml files created when adding a domain the script does not modify the <local><id> that the server uses to identify the JID with.
After manually modifying that id to match my domain, and restarting the ejabberd server, it works fine again!
It seems like when adding or modifying the jabber:hostsCommaDelimitedString="" the server default hostname is always inserted into the <local><id>.
//Staffan

Authentication failure after upgrade to 10.4 Server

Similar Messages

Maybe you are looking for