Authentication from third party product to Portal samaccountname=domain\ID

I am working on a proof of concept at our company to pass authentication from windows ISA server to EP 7.0 Sp10. ISA server is setup as reverse proxy, both ISA and EP are connected to same LDAP.
We are able to successfully authenticate at the ISA server, then it calls the portal server with correct URL like http://portalserver.abc.com:53000/irj, but authentication fails with error message "User authentication failed".
After increasing the log level, I am repeatedly finding that the user name is sent by ISA server as  samaccountname=domain
userid. But the portal UME is configured without the domain name, i.e,. samaccountname=userid
Obviously, this can be resolved either modifying the ISA to send only the user ID or configure the portal to accept samaccountname=domain
userid.
Internally we do not have great ISA skills to modify this, so I am wondering if it is possible to change the portal to accept samaccountname=domain
userid. Please advice.
Steve

Hello Srini,
I know that your thread is a bit out of date, but we are facing the exact issue at the moment.
I wonder how did you manage it to have it worked?
Was it at the ISA level or at the Portal Config level?
Thank you

Similar Messages

  • Sidebar missing from iCal in Lion - seeking a third party product to restore lost functionality

    Apple has removed the sidebar, the always-on list of calendars that required no click.
    The shallow popover that appears only when clicked — obscuring part of the calendar before disappearing — is to me (and some others) an unacceptable substitute for working with multiple calendars, especially where calendars are grouped across multiple servers.
    I'm aware of third party alternatives to iCal. (Most full-featured calendar interfaces do have an always-on full-height list of calendars. Probably the best known alternative to iCal is BusyCal.)
    This topic does not seek alternatives; I do wish to continue using iCal, albeit in a way that is less frustrating than what Apple forces upon users of 10.7.
    This topic seeks:
    a third party product that will restore lost functionality to iCal.
    To any developer who reads this topic: please, I beg you, on my knees, submit your iCal sidebar app — or whatever you wish to call it — to the App Store as soon as you can. I'll gladly pay, and more than gladly help to test any pre-Store development version.
    Other readers please note: whilst I'm extraordinarily frustrated by Apple's design decision, this is not an invitation to rant. Let's gain something constructive from this discussion.
    If you wish Apple to restore the sidebar to iCal, as an option, then please:
    submit iCal feedback to Apple, with your use case; explain why for you personally the limited disappearing popover is a poor substitute; explain how the sidebar will improve both (a) your productivity and (b) your appreciation of Apple's software.
    Side note: no category includes iCal, so I file this opening post under Using Mac OS X v10.7 Lion.
    Thank you
    Graham

    Gauroch wrote:
    the new way
    Many things in the new iCal are beautifully designed. I am certain that the new iCal will be enjoyed by people who use the new multi-session screen sharing for Mac OS on iOS (that should be a separate topic).
    iCal's aqua popover default may be perfect for people who have only a handful of calendars.
    Critically
    The new design fails completely to offer an always-on full-height list of calendars — invaluable when working with more than a handful of things.
    The screenshot below, taken whilst evaluating BusyCal, shows a subset of my list of calendars (more than the average user, that's why an always-on list is so valuable). In shot: three accounts on a CalDAV server. I have other, lesser used accounts on other CalDAV servers. Also some use of Exchange servers. My own case is extreme but there's a guiding principle for a variety of use cases:
    some users need to see the list of calendars all the time.
    What's exmplified below has become impossible in iCal 5.0 (1535) in Mac OS X 10.7 (Build 11A511).
    I plead with Apple, or a third party developer, to restore the sidebar list of calendars to iCal.
    Apple's limitation is acceptable when the user has only two calendars —
    — but for some other classes of user, completely inappropriate.
    The percentage of users troubled by the loss of functionality may be less than the percentage enjoying the popover, but that in itself does not reduce the trouble, the frustration.
    The sidebar was present in 10.4, removed in 10.5. Many users of 10.5 complained.
    The sidebar reappeared in 10.6. Removal in 10.7 is almost completely dumbfounding.
    I would like to say, "give it time — the more you use it, the more it will be appreciated" but for me this is not true. For some weeks I tried to work with this build of iCal and the more I used it, the greater the frustration. I grew to avoid iCal.
    In most ways the feature set of iCal is unequalled. Support for many standards is excellent. The removal of the sidebar is a blight on this brilliance.
    I plead with Apple or a third party developer to fix this at the earliest opportunity. I want Apple iCal — but user-friendly, not crippled.

  • Number of remote RFC connections to SAP from third party application

    Hi All,
    We are using an external application which is using the JCO API to make a connection to the SAP server to pass invoices. But the connections are note properly closed after invoking the RFCs and SAP seems to be not able to handle further requests once the numer  of connections reach the maximum limit.
    Could you tell whether there is a max limit on the number of connections opened to SAP from remote function calls from a third party product?
    Is there anyway by which we can make sure that connections are properly closed in SAP after the each remote call?
    Thanks in advance for your pointers.
    Regards
    Arun

    Dear Arun,
    Here are the parameter settings which you can do to set up RFC connections to SAP servers.
    http://help.sap.com/saphelp_nw70/helpdata/en/c3/ce70a5cf0ab1499bfbf464e6e92de0/frameset.htm
    This will resolve all your problems.
    Thanks & Regards
    Vivek

  • I bought a macbook air and iMac from third party with preinstalled ilife and iworks

    I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs.  I have no CD's or license for those products?
    thanks

    No, you will not be able to do that.

  • Connecting to the Third Party Applicatin through Portal

    Hi,
    Does anyone know how do we connect to the Third Party Application through Portal? WHat technology EP uses to connect to the third party application and retrieve data from the system to display?
    ALso if i have 2 application connected to the portal and if I retrieve one record from one application, then i want Portal to bring information related to that record from another application. In that case, do we have to maintain referential information about the records in both the applications, so that Portal will know which record id to pull from another application? How does it work?
    Thank you very much in advance.
    Shakil

    Hi ,
    Have a searched sdn before posting this? have a look and post your message if your requirement dont match with below solution.
    Want to access non SAP system from EP
    Regards,
    Koti Reddy

  • Can we install Applications from third party websi...

    hello everyone
    recently bought my new asha 501 phone
    but i have a doubt 
    cant we install apps from third party websites like MOBILE9.COM, ZEDGE ETC
    ????? IF YES THEN HOW???
    and what JAVA VERSION IS THIS 
    J2ME???
    aksytechie wrote:
    goto settings > about product
    PLS HELP ME 
    Moderator's note: We amended the title of this post as we moved it to the appropriate board.

    Hi,
    Welcome to the forum!
    We cannot guarantee its compatibility when downloading from a third party website. Though we recommend all Nokia users to download any applications, games, or even themes through the Nokia Store. In the Nokia Store, you will be able to see all compatible applications, games and themes for your device. Just make sure you have an active and stable internet connection on your phone, you are currently signed into your Nokia account, find the application that you would like to download and then download it from there. 

  • Can not receive emails from third party email accounts

    Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
    exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally. 
    This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
    Thanks a lot!! 
    Sammy 

    Checklist for testing inbound email problems, I am assuming outbound emails works ok.
    1. Check Port 25 forwarding on all modems routers/firewalls
    2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
    3. If using POP Connector Service, make sure POP accounts are created properly
    4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

  • DMS document migration from Third Party DMS server(Omnidocs)

    HI guys,
    I would like to migrate document from Third party DMS server to  sap DMS server.
    What is the apporach.
    1. The thir party dms server is protected with login name and password.
    How i can extract data from the software.
    Please spread your thoughts on this.
    what is the function module to  download the contents of the server. by passing the url.
    with regards
    Giri

    use ALE scenario to send the documents

  • Sender RFC from Third Party System

    I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
    Solution.
    1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
    2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
    Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
    Appreciate any feedback. Please advice

    That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
    Here is the text about INI file
    You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
    ■       By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
    ■       By using appropriate parameters in the function RfcOpenEx.
    If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
    All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
    Example for the saprfc.ini-file is as follows:
    DEST=RFCCLIENTEXT
    TYPE=R
    PROGID=P106646.HKExternalClient
    GWHOST=pwdf2153
    GWSERV=sapgw40
    Please check the following link, for the same  text on RFC Sender
    [Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
    Using the same Sender RFC for non-SAP System, please share any ideas

  • Incoming invoice from third party system

    Hi All,
    Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
    Thanks in advance for response.

    Why not starting with docu?
    The general process  is explained well in help.sap.com
    As a service, put this into your Google: vendor invoice edi site:help.sap.com

  • Help me!    How to use it as a web service from third party application?

    After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
    TKS！

    Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
    :D
    John

  • Third Party Product Forum

    Is there such a thing as a third party solutions forum where we can promote and discuss SAP-related third party products?
    Thanks,
    Marco

    Hi Marco,
    We just started a new forum a few weeks ago.
    SAP Productivity Pak / SAP Productivity Composer
    SAP Productivity Pak / SAP Productivity Composer by ANCILE
    We have more in the pipeline in the second half of the year.
    Also, older partner forums
    SAP Talent Visualization by Nakisa
    SAP Organizational Visualization by Nakisa and SAP Talent Visualization by Nakisa
    Redwood Central Process Scheduling
    SAP Business Process Automation by Redwood
    Duet
    Duet
    Best Regards,
    Matthew

  • Advantage of using SAP product over third party products

    Hi All,
    I want to know whether there is any advantage of creating SAP product over the third party products in SLD.And if we want to remove Product at later stage can we do that ?
    Thanks,
    Amit

    Hi Amit,
    Are you talking about creating an SAP product under SLD? For client developements it is suggested to create only 3rd party products in SLD for developing the interfaces.
    VJ

  • Exadata Database Machine & Third Party Products

    Is there a document which lists out which Third Party Products are specifically allowed on the Exadata DB Machine? I am interested in CA Autosys, which is our enterprise scheduler.

    There is no specific certification program for software on Exadata database servers, just a general recommendation to limit it to low-impact tasks like monitoring agents. Kernel-level modifications or third-party software on storage servers are not permitted.
    I'm actually working on an Exadata implementation including AutoSys at the moment, and so far have found no problems with it.
    Marc

  • SE80 third party products

    Hello,
    If A-X is reserved for SAP AG and Z and Y are for customers, what is the naming convention for packages over third party products (eg. SOD tool like Virsa). Is "/" (forward slash) used for these? If so, is this a must or is this just the general practice?  Thanks in advance.

    Salim,
    Third Party products go under their own name space, like /VIRSA/
    Changing these objects would still be a repair.
    Go to - Se03->Administration-> Display/Change Namespaces. here you can can view all the namespaces in the system.
    For additional info - refer to SAP help.
    Setting Up a Namespace for Development - Namespaces and Naming Conventions (BC-CTS-NAM) - SAP Library
    Thanks,
    VM.

Maybe you are looking for

  • Vendor is getting downloaded as Organisation from R/3 to CRM

    While downloading vendors from R/3 to CRM, the vendor is getting created successfully under role vendor. However, if I assign vendor to title of person in R/3 (as Mr., Mrs etc), it gives me validation error related to title. In short it allows me onl

  • Creating a new Hashtag within a Discussion in a Community site - Can it be done?

    Hi, Can somebody confirm whether we can create new hashtags by typing them in the Description field of a new Discussion within a Community site? I can't seem to be able to create new hashtags...however, any existing hashtags that was already created

  • Data Insertion, XML Schema Specifying Element minOccurs="1

    An XML schema having an element with attribute minOccurs="1" has been successfully registered. A table was created based on that schema. Inserting data both with and without that element works successfully. Why is this?

  • FrameLabel vs .currentLabel vs currentFrame

    Hey people, Quick question, i've run into an issue in AS3 where I can't seem to accurately acquire the frame number in a movieclip, my script is on the root/stage level and references my movieclip. I've tried using FrameLabel and currentFrame instead

  • Desktop Software version 5 phase out

    As last week i still can download the Blackberry Desktop Software version 5 at  'download' page of blackberry http://us.blackberry.com/apps-software/desktop/. But now i needed to go to 'service provider page' http://us.blackberry.com/support/downl