Authentication login error

Hi,
I'm getting authentication error while logging in to SMC console. I have defined user under /var/opt/SUNWsymon/cfg/esusers but still can not login to console server. Has anyone encounter this error.
TIA

I'm getting authentication error while logging in to
SMC console. I have defined user under
/var/opt/SUNWsymon/cfg/esusers but still can not
login to console server. Has anyone encounter this
error.Silly question, but does the user you defined in that file also have a valid Solaris user account on the SunMC Server system? And you didn't accidentally leave caps-lock on?
Can you login as another user, or is it broken for everybody? Any chance the Server entry is wrong when you tried to login: i.e. is the hostname correct and resolvable from where you launched the Console, and have you tried using the IP Address instead?
Regards,
[email protected]
http://www.HalcyonInc.com

Similar Messages

Cisco UCS Management Pack for System Center Operations Manager 2007 R2 Login Error

I have Cisco UCS 1.4 (3q) and just installed the MP v2.1 for Cisco UCS, however when I click on the "Management Pack Events" alert view in the SCOM console, there are error for event number 19900. The description of the error is as follows:
Description:
CISCO UCS R2 MP (https://10.x.x.x/nuova) [CISCO.UCS.R2.Proxy.LoadCache.ProbeAction.vbs] : CISCO UCS Login Error: Authentication failed (Code: 551)
I noticed that it's looking for the /nuova directory, but in order to login to our UCS environment, we usually just go to the IP address - so I'm wondering if that has something to do with it? I've verified that when going directly to the IP from Internet Explorer I can login using the opsmgr credentials we specifically created for this account. I've also gone through the process of creating a run-as account on the SCOM side and associated it with the correct profiles.
Any help is greatly appreciated.

Troubleshooting has found out its user error, wrong password configured.

Sql 2005 login error

Post Author: dmccahanpppa
CA Forum: General
We are migrating from JD Edwards on AS400 to Microsoft Dynamics GP on SQL 2005. I can create and refresh reports without problem using sa as the login account in Crystal. When I use any of the users created in Dynamics GP (as they have to for users to access GP) I get a login error from the SQL server. This is using the same ODBC connection and I have taken some of the users and elevated there permission on the GP database and/or overall sql server to even dbo and sysadmin and still cannot get any login other than sa to work. Any sql GURUs out there that can tell me what I'm missing?
Thanks

Post Author: dmccahanpppa
CA Forum: General
I have tried creating ODBC connections (and also found a business objects article on OLE DB and tried that) with SQL Authentication and also with windows. I have made sure my users have usernames in GP that are all lower case name and password. The only thing that is getting me close is to use windows authentication on the odbc connection, set the odbc connection to a specific sql database, and give the users windows read permissions to that database. As a domain admin this gives complete access. With the users the login error goes away but I only see stored procedures and not the tables or views. I'm trying to find the minimum access to give the users in windows to allow windows authentication to work.
What I don't understand is why this should be so difficult to find the correct answer on. I have the same issue on a very plain install (everything on the server, sql, gp, and crystal) with just microsoft's test company and data as I do the production system (gp and sql on one server and citrix client and crystal on another). I setup the test server (a couple of times blew the whole thing away and rebuilt following gp procedures) and consultants built the production environment. You would think Microsoft (since they blow their marketing horn about how Crystal Reports works with GP) or Business Objects would have the user and odbc setup for this documented.
Ok...so I'm a bit delusional....

IPhone deploy gets Login Error (Invalid username/password). Android works

Hi, we're developing an ADF Mobile app on JDeveloper 11.1.2.3 which does initial authentication against Weblogic.
The login & app works fine on Android, but fails when we deploy the same app to iPhone (iOS 5.0.1, but also 5.1, 6.0 & 6.1 in the Simulator).
Specific message is :
Login Error
Invalid username/password. If the problem persists, please contact your system administrator.
It's definitely on the network and reaching the login server, because when we shut down the server or make the network unavailable, the message reports "The login server is not reachable"
All I can think is it's possibly encrypting the password differently within iOS.
Not having much luck on Google or other searches, so any thoughts are appreciated.
Thanks
Peter

I found a bit more information in the Weblogic Managed Server logs proving the login request reaches the server, but gives this error. Not much luck on google so, if this rings any bells for anyone thoughts are appreciated.
FROM : /oracle/product/admin/domains/cdlmobile_domain/servers/cdlmobile_server1/logs/cdlmobile_server1-diagnostic.log
[2013-04-04T17:04:58.426+01:00] [cdlmobile_server1] [WARNING] [] [org.apache.myfaces.trinidadinternal.agent.AgentFactoryImpl] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: tatmfy] [ecid: 53bd9d60b35a3019:-327732ec:13dcfd76fee:-8000-00000000000029b3,0] [APP: BC040113_Project1_BC040113] The User-Agent "cdlivemobile/1.0 CFNetwork/609.1.4 Darwin/12.3.0" is unknown; creating an agent with "unknown" agent attributes.

Login error with BOXI 3.1

I frequently get a login error with BO XI 3.1 (with fix patched 1.3 and SAP interface installed on Linux machine).
ERROR:
Account information not recognized: The property SI_GUID of info object with id number 1876 is not unique. Table = 'CMS_InfoObjects6'. Column = 'SI_GUID'.
(authentication type: enterprise)
Error comes after first logging out with User1 and then trying to login again immediately with User2 (with IE6).
Thanks, Timo

Hello again,
Just to answer your questions:
- Yes, all systems are in the same domain
- I have configured BOE for SAP SSO. Users and roles have been imported.
- The SAP Portal is sending the ticket.
We've been able to reproduce the error over different client machines, and a workaround involves closing the browser window (with the error) that gets launched from SAP Portal on the first attempt and then clicking through to BO from the SAP Portal again. It works fine after that, but I'm afraid that some users might find this annoying/alarming
Thanks,
Myla

SQL 4060 Login Error

We have recently released a couple of new reports, but have discovered that although the reports run fine when launched in WEBi, whenever we try to refresh the report we fail with a SQL 4060 Login failed error message. This occurs in WEBi and BO. The reports run fine when logged into a 'Supervisor' level account.We've reviewed user permissions, but can't seem to find the cause of this issue. Any ideas?

Post Author: dmccahanpppa
CA Forum: General
I have tried creating ODBC connections (and also found a business objects article on OLE DB and tried that) with SQL Authentication and also with windows. I have made sure my users have usernames in GP that are all lower case name and password. The only thing that is getting me close is to use windows authentication on the odbc connection, set the odbc connection to a specific sql database, and give the users windows read permissions to that database. As a domain admin this gives complete access. With the users the login error goes away but I only see stored procedures and not the tables or views. I'm trying to find the minimum access to give the users in windows to allow windows authentication to work.
What I don't understand is why this should be so difficult to find the correct answer on. I have the same issue on a very plain install (everything on the server, sql, gp, and crystal) with just microsoft's test company and data as I do the production system (gp and sql on one server and citrix client and crystal on another). I setup the test server (a couple of times blew the whole thing away and rebuilt following gp procedures) and consultants built the production environment. You would think Microsoft (since they blow their marketing horn about how Crystal Reports works with GP) or Business Objects would have the user and odbc setup for this documented.
Ok...so I'm a bit delusional....

SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert) after Firefox 36 Upgrade

When upgrading from Firefox 35 to 36 (Windows 8, 32 bit) I start getting "SSL peer reports incorrect Message Authentication Code (Error code: ssl_error_bad_mac_alert)" SSL errors on at least one website I use. (https://marketplace.ibmcloud.com).
The message only appears when I get redirected to the website again after a previous OpenID login (some more cookies are set). When I browse the website without authentication it works on the encryption without any issues.
None of [1] applied, I do not experience this problem with any other browser or the previous version of Firefox. It seems to be limited to the specific case. Clearing any kind of cache, enable / disabled the ssl3* mechanisms, did have zero effect.
Is there any other way to debug this or someone has an idea what changed with Firefox 36 to introduce this behavior? I downgraded back to 35 for now to work again.
[1] https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=SSL+peer+reports+incorrect+Message+Authentication+Code+(Error+code%3A+ssl_error_bad_mac_alert)&step=aaq-question

I created a ticket there as well for them to investigate, although knowing IBM I guess we know the answer already, if I hear anything from there I will let you know.
However, as the problem only occurs on the one version of Firefox as of right now, I'm inclined to role out potential server side issues as a reason and pass it to something within Firefox, or was there a change any encryption defaults that might force the server to switch to a different version or something that might have the bug?

UCCX HRC login error:

Is there a doc that can tell me the valid characters for the Historical Reporting Client password? One of our users keeps getting this error: Login Error An error occurred while attempting to communicate with web server. Check your userid and password and try again.
I've tried it from the users machine with my credentials and got in fine. I know the user has special characters like >,.,?,/ in their password. They need at least 1 or 2 special characters for some other applications. If I knew which UCCX will allow me to use we can come up with a new password. Thank you.
Phil

I do not think that HRC or CCX handles this. All authentication is done via CM. Now wether or not the CM is using Active Directory and what affect that has I do not know.
Can this person login to the http://cmserver/ccmuser page on the CM server with those creds?

Create a SQL Server authentication login

I am trying to create an SQL Server authentication login. using the documentation given http://azure.microsoft.com/en-gb/documentation/articles/sql-database-get-started/#QueryDBSysData
with the below sql statement
CREATE LOGIN login1 WITH password='Password1';
but gives an error
Msg 5001, Level 16, State 1, Line 1
User must be in the master database.
how do i get around this problem?

Hi roma_victa,
Please make sure that you issue the command in the master database of your logical server, otherwise it will fail.
Thanks,
Jan

Why does a Login Error occur: "AFP Client wants to use Keychain Login"?

I have three people in my house with separate logins. We are currently using two desktop G4s which are networked via 1000 Base T. When the users login to one of the Macs, they must enter their passwords twice. Once for the AppleShare login and then a second time for the KeyChain Login.
If I attempt to unify the passwords, which are exactly the same, I will get a login error: "AFP Client wants to use Keychain Login". At this point, a dialogue box will appear looking for a password, but not accepting any kind of text at all. All I can do is reset the Mac, go into my admin login and remove the login.keychain file from the local Library folder to get back into the User account.
In my attempts to fix this, I have removed every preference file with the word "login" in it and re-logged in without success. I have also used the Keychain Access software to administer Keychain First Aid without success. Finally, I have deleted the keychain login in Keychain Access without success. I have done all of these separately and together without success.
This is only happening on one Mac. The Mac that has no files on it. All working files are stored on the other Mac and it does not have the same problem at all.
This is not a huge problem, but it is annoying. I would appreciate it if anybody knows anything about this and could shine some light on the situation.

Sorry about the delay from your last reply. I have been busy with work and studying for a licensing exam.
Anyway I tried the AppleJack Utility you suggested. It looked like it tidied up some things. But as for my particular issue, it did absolutely nothing.
Interestingly enough, you know when you aren't looking for something and that something just happens by accident? When I logged in the other day, I typed in the first login. The second dialogue came up immediately and I hit the cancel button instead of the OK button. When I was passed on to the Finder, the second login dialogue came up again. I typed in the password this time and checked the checkbox. When I relogged in, the problem vanished. I only waited this long to let you know to make sure the problem is gone and it is. I wish I would have thought of selecting the cancel button before. Sometimes solutions are simple like this one.
Thanks for your help.

My MacBook Pro Retina's Bluetooth chipset unknown/odd login message on the login screen states Login Window Authentication Login window Name edit text has keyboard focus. In addition, the login screen is not remembering me

I have been experiencing several issues with my MacBook Pro Retina mid 2012. My MBPR is scheduled to go into the depot. However, I am wondering if anyone may be able to shed light on a few issues as this is the third "official" time my MBPR is going back for service ("one depot" trip; "one authorized" dealer; several in-store visits).
My Bluetooth is stating that the Bluetooth Chipset is Unknown (0). I also have had Bluetooth Preferences mysteriously change on me. In addition, while Bluetooth is off there are two serial modems turning on. I have turned them off, but they continue to pop up.
In addition, when I log in, my MBPR is not remembering me and my login name is not appearing on the slate-gray screen. The name and password are blank and the following message appears in the lower left hand corner. "login window authentication login window Name edit text has keyboard focus." As a side note, I am the only user. The login issue is a recent occurrence as we just totally wiped it again via a Command + R, and I don't believe I have an accessibility setting set to anything that would cause this, but wanted to check.
Should I be concerned here? Has anyone else had issues like this? I don't want to worry if I don't have to. I have had so many issues over the course of nine months. 5-6 wipes. Airport card replaced and I am about to pull my hair out if my MBPR doesn't come back worldly like clock work this time. I just can't send my days trying to get a $2300 product to work for me any longer. No idea what is wrong with it, but it is driving me insane. Cross your fingers for me and any guidance you have or thoughts would be welcomed. Thank you. EMM

A few more issues...
In Console, the following is greyed out:
User and Diagnostic reports
Com.apple.launchd.peruser.0
Com.apple.launchd.peruser.88
Com.apple.launchd.peruser.89
Com.apple.launchd.peruser.92
Com.apple.launchd.peruser.97
Com.apple.launchd.peruser.200
Com.apple.launchd.peruser.201
Com.apple.launchd.peruser.202
Com.apple.launchd.peruser.212
*[user logs are accessible]
Krb5kdc
Radius
My guest files are locked, but again I am the administrator of MBPR.
I am worried about a keystroke logged or at least, trying to rule it out.
Also:
Mdworker32(225) [and other mdworker numbers] are sandboxing; stating deny Mach-lookup
Com.apple.Powermanagement.control, etc. long attachment with those files with version: ??? (???).
Postinstall: removing applications/Microsoft Office 2011/Microsoft Outlook.app
WARNINGS in Console include:
[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 19.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction] instead.
There are a ton of other warnings. Before I go through this again, can someone tell me if this is normal (all of it -- above too); or if these are symptoms is a keystroke logger or hardware issues?
I ask because originally, when my computer went in for diagnostics (more than once), Apple stated the hardware was fine (other than Airport Card -- finally). However, if I've done 5-6 total wipes; created new users; do not have sharing set-up; have not played around in Terminal; and am up-to-date with versions -- and various issues KEEP COMING BACK -- I am left wondering if a keystroke logger would be possible here?!? I thought maybe a faulty logic board, but why would diagnostics be okay, then? Not trying to be hyperbole, just desperate.
Please help me rule keystroke logger out or at least, tell me so I know, so I can take appropriate action. If you think it could be the logic board with symptoms above, that would be a great too.
All I want to do is use the computer as intended, but I can't seem to get a real answer, so after nine months -- I am turning to the communities to see if anyone -- anyone at all -- can help. The last thing I can do is have the MBPR come back from the depot and the same thing occur. Any guidance or advice would be so gratefully appreciated.

5213: Bad Oracle login error in OCISessionBegin() while running ttcacheuidp

Hi,
I am working on Oracle TimesTen Client: Oracle TimesTen 11.2.1.8.0
I am following this step: http://download.oracle.com/otn_hosted_doc/timesten/1121/quickstart/html/admin/cache_grid_create.html
I am in the step 4: 4. Associate the Oracle Cache Administration user with the Cache Database
And I got this error:
Command> connect "dsn=cachedsh_schema;uid=cacheadm;pwd=cacheadm;oraclepwd=oracle";
Connection successful: DSN=cachedsh_schema;UID=cacheadm;DataStore=/u03/TimesTenCache/datastore/cachedsh_schema;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=/u01/app/oracle/product/TimesTen/ttscofield/TimesTen/ttscofield/lib/libtten.so;PermSize=768;TempSize=256;TypeMode=0;OracleNetServiceName=SCOFIELD;
(Default setting AutoCommit=1)
Command> call ttcacheuidpwdset ('cacheadm','cacheadm');
5213: Bad Oracle login error in OCISessionBegin(): ORA-01017: invalid username/password; logon denied rc = -1
5935: Could not validate Oracle login: uid = CACHEADM, pwd = HIDDEN, OracleNetServiceName = SCOFIELD, TNS_ADMIN = "", ORACLE_HOME= "/u01/app/oracle/product/11.2/db_1"
The command failed.
What seems to be the issue?
I referenced this link: http://download.oracle.com/otn_hosted_doc/timesten/1121/doc/timesten.1121/e13069/proced.htm#TTREF237
And on the notes it says:
Notes
This procedure cannot be called from a Client/Server connection.
This procedure is available only for IMDB Cache.
The cache administration user ID and password cannot be set while either the cache agent or the replication agent are running.
The cache administration user ID cannot be reset while there are ASYNCHRONOUS WRITETHROUGH cache groups or AUTOREFRESH cache groups (with a state that is not equal to OFF) on the database.
What does: This procedure cannot be called from a Client/Server connection mean?
Is this the root cause of the problem or I am missing a step?
Thanks!

I still get the same error. But I have figured out what is wrong. Just in case other users encounter the same errors, here's what I did:
I created a tnsnames.ora file in my TIMESTEN_HOME/network/admin that has the connection info to testenv Oracle instance. +(i dont know if this is necessary)+. Then:
[oracle@testenv ~]$ ttmodinstall -tns_admin option
TNS_ADMIN for the instance 'testenv' is currently not set.
Would you like to change TNS_ADMIN for this instance? [ yes ]
Please enter a value for TNS_ADMIN (q=quit)? [ option ] /u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/network/admin
Do you want to restart the daemon using the new configuration? [ yes ]
Restarting the daemon ...
TimesTen Daemon stopped.
TimesTen Daemon startup OK.
Instance testenv is now configured with TNS_ADMIN=/u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/network/admin
[oracle@testenv ~]$ ttversion
TimesTen Release 11.2.1.8.0 (64 bit Linux/x86_64) (testenv:53388) 2011-02-02T02:20:46Z
Instance admin: oracle
Instance home directory: /u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv
Group owner: oinstall
Daemon home directory: /u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/info
PL/SQL enabled.
[oracle@testenv ~]$ ttisql "dsn=cachedsh_schema;uid=cacheadm;pwd=cacheadm;oraclepwd=cacheadm"
Copyright (c) 1996-2011, Oracle. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
connect "dsn=cachedsh_schema;uid=cacheadm;pwd=cacheadm;oraclepwd=cacheadm";
Connection successful: DSN=cachedsh_schema;UID=cacheadm;DataStore=/u03/TimesTenCache/datastore/cachedsh_schema;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=/u01/app/oracle/product/TimesTen/testenv/TimesTen/testenv/lib/libtten.so;PermSize=768;TempSize=256;TypeMode=0;OracleNetServiceName=SCOFIELD;
(Default setting AutoCommit=1)
Command> call ttgridcreate ('cachedshgrid');
Command> call ttgridinfo;
< CACHEDSHGRID, CACHEADM, Linux x86-64, 64-bit, 11, 2, 1 >
1 row found.
Command> call ttgridnameset ('cachedshgrid');
Command>
Thanks!

Oracle Enterprise Manager 11g - 'unexpected login error'

Hi,
I am having trouble logging into Oracle Enterprise Manager - Fusion Middleware Control. at the login screen when i enter in the UN and PWD, I get the msg: 'unexpected login error'. I was able to login before, this just happend and now I cannot login. Any help would be appreciated.
Thanks.

You may have greater chances to get an answer....there:
Enterprise Manager
Greetings...
Sim

I can't login from the desktop app - "Login error. Please contact the Admin."

1) Does anyone have the same problem as described below?
2) Does anyone know how to fix it?
When I try to "work online" from the desktop app, I get asked to log out of offline, then log into online. When I put in my username and password, it gives me the error "Login error. Please contact the Admin." I've clicked the link "Trouble logging in?" and followed instructions to reset my password, which I successfully reset to a new one. I still get the error.
I have a subscription to Adobe Story Plus and am working offline/online using the desktop app. I haven't logged in to sync my documents in about a month. My account is in good standing (paid 2 weeks ago according to my account transactions screen). I'm now trying to collaborate, so it's important that I be able to sync.
Any help would be greatly appreciated.
Thanks,
John

Hi Rohit,
Thanks for your response. I've resolved the problem myself, and you may be
interested to know how in case it happens again with another user - I
thought maybe it was a versioning discrepancy and I was right (I assume).
However, I couldn't update my desktop software (or I couldn't figure out
how to update it) until I rebooted my machine, then Story went into an
auto-update sequence.
After it updated, it logged in and sync'd just fine. Classic "help"
question where the answer basically was: reboot. I shouldn't tried that
before I posted!
I hope that helps.
Thanks,
John
On Mon, Jun 16, 2014 at 3:02 PM, Rohit (Story Team) <

Folio Builder login error

Now 2012.08.08
In Indesign CS 6
Folio Builder login error appears. Message is shown below.
"Sign in has failed
Network failure"
How do you solve?
DPS Version is
12.2.4.20120611_m_691037
8.0.7.21

http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5377&fileID=5010
Patch!
Solve it!
Enjoy Works~!

Authentication login error

Similar Messages

Maybe you are looking for