Authentication Problem - Specify the correect username or password
Hello dear software developers.
I'm a newbie on WebCenter Portal. After installation parts, i try to run my first application according to this tutorial -> http://www.youtube.com/watch?v=Gc1Zdikx4sc
Time of 4.54 in tutorial i entered user name and the password. Username and password that i wrote in the step of web logic server creation.
Then i have an warning "Specify the correct username or password !"
I don't know the exact problem actually. Can you help me about the problem please?
Edited by: 948668 on 25.Tem.2012 05:10
Hi,
I think I have a way to solve your problem now that I know the pass you use. When I first tried to put security on my site and add passwords, I noticed that there was a minimum characters I needed to include to have it work (7 or 8 characters) AND a password with letters and numbers. So, try these steps:
1. In "Application Ressources" section, go in "Descriptors --> META-INF --> jazn-data.xml". http://postimage.org/image/nesk8su4l/
2. In "overview" display, go in "Users" section, and add a user named "admin" with the password "password1" by example.
3. Put "Administrator" as "assigned role".
4. Run your application and enter these username / password.
You'll be able to access the administration console this way ;)
Edited by: Maxime Carrier on Jul 25, 2012 9:44 AM
Similar Messages
-
Hardware Information:
MacBook Pro - model: MacBookPro6,2
1 2.66 GHz Intel Core i7 CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce GT 330M - VRAM: 512 MB
Intel HD Graphics - VRAM: 288 MB
Startup Items:
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: up 0:0:48:37
Disk Information:
TOSHIBA MK5055GSXF disk0 : (465.76 GB)
(null) (disk0s1) <not mounted>: 200 MB
MacBook Pro HD (disk0s2) /: 465.44 GB (440.47 GB free)
MATSHITADVD-R UJ-898
Have tried…
re-setting Time Capsule (soft and hard) and power disconnect
re-setting modem
changing passwords in all relative locations
deleteing file://localhost/Library/Preferences/com.apple.TimeMachine.plist
deleteing all mention of Time Capsule in Keychain Access
running KeyChain First Aid (no problem found)
Restarting computer
Time Capsule has a green light, other MacBook Pro backs up OK but this machine continues to receive above error message and will not Enter Time Machine producing the error message Your Time Machine backup disk can’t be found. Maybe I need to do something over or in a particular order? All help is appreciated!With the TC plugged by ethernet into the computer.. still in full isolation to the network and with factory reset.. you can do another to be sure.
Please open the network preferences.. and check the IP the ethernet is getting from the TC.
It should be 10.0.1.2
I set it to this manually
Don't worry about all the rest.
If you open airport utility can it see the TC?
YES
If not then I think you have a major network issue on the computer.
Assuming you can see the TC in airport utility.. go to manual setup and the disk tab. Does the disk register any issues.. SMART should show it has verified.
Shows verified
Now go to finder..
Mount the drive manually via the top menu.. Go.. Connect to server.
And type in the address.. SMB://10.0.1.1
Did NOT work, however 10.0.1.2 did
That should discover the drive and ask you for credentials which after a factory reset will just be public as the password. The drive should mount and you can then see it in finder.
Yes, but I have been able to do this with the IP address being set automatically
I would deliberately use SMB. The other alternative is AFP://10.0.1.1 but that seems to be more problematic at times..
Once mounted point TM to the drive and see if it can find it and start the backup.. if it fails I think you have need to use the A5 in pondini's troubleshooting and see what you can do.
It failed and A5 makes NO difference.
A drive that won't mount is obviously not going to work.
Pondini is welcome to make comments... sometimes my Mac terminology gets a bit loose.. !! My recent convert status is visible .. !!
My other solutions.. since these are fairly old products.. the TC is more than 3years in all likelihood so outside warranty.. get a USB drive and plug it into the Mac and use TM to backup to that. If that works.. I would erase the hard disk in the TC and start over with both computers.. you will need to backup the other computer before you erase of course. Erasing and starting over does seem to help.
If there are no other suggestions, I guess I will try erasing and starting over. Thank you both for ALL your advice. -
OC4J 1.0.2.2.1, connection pooling, and over-riding the default username and password
We are using OC4J 1.0.2.2.1 and connection pooling with data-sources.xml
In data-sources.xml, we have specified the default username and password.
However, there are situations where we will want to use a different username and password and still use the connection pool. For example:
public static Connection getConnection(String aUserNameS, String aPasswordS) {
Connection conn;
try {
InitialContext ic = new InitialContext();
DataSource ds = (DataSource) ic.lookup("jdbc/ejb/OracleDS");
conn = ds.getConnection(aUserNameS, aPasswordS);
} catch (Exception ex) {...}
return conn;
Will this work? I mean, is it possible to specify a different username and password in the JNDI lookup and have it over-ride a provided default username and password in data-sources.xml?
Thanks,
EdThis may be problem with your userid/password. Please look the $OC4J_HOME/j2ee/home/config/principals.xml whether you have a right userid password.
I did a quick test at looking up at "jdbc/OracleDS" for two users admin and SCOTT and this works fine both in 1.0.2.2.x an 9.0.2
I got your errors when I had wrong passwords for these users
regards
Debu -
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Issue:
Cisco firewalls require only one level of password i.e. the domain username and password are used for both logging in as well as reaching global configuration mode.
Background:
We have multiple Cisco network devices set up which authenticate to our Windows domain controller using NPS (Windows 2008 R2). The switches we have set up all function exactly as we would hope as they require your domain username and password to login to the device. They then require a separate password when you use the enable command, this is stored in Active Directory:
Switches:
Username:domain-username
Password:domain-password
SWITCH>enable
Password:enable-password-in-Active-Directory
SWITCH#
Firewalls (as they currently are):
Username:domain-username
Password:domain-password
FIREWALL>enable
Password:domain-password
FIREWALL #
With the firewalls however, they require your domain username and password first, and then your domain password again when using the enable command. I want the firewalls to use the enable level password that the switches currently use instead of the domain password again. The current configuration look like the following:
Current switch configuration:
aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
aaa authorization exec default group radius local
aaa session-id common
radius-server host 192.168.0.1 auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server key 7 1234abcd
Current firewall configuration:
aaa-server DC01 protocol radius
aaa-server DC01 (outside) host 192.168.0.1
aaa authentication ssh console DC01 LOCAL
aaa authentication enable console DC01 LOCAL
key 1234abcd
Any help would be great, thanks!Cisco ASA works that way by design. You could remove "aaa authentication enable" and then you could use the "enable password" command to set your enable password.
But if you do that, then ASA would change your username to "enable_15". That would break Authorization and Accounting if you're using them. Let me clarify with an example
Firewalls :
Username:domain-username
Password:domain-password
FIREWALL>show curpriv
Username : domain-username
Current privilege level : 1
Current Mode/s : P_UNPR
FIREWALL>enable
Password:enable-password-from-running-config
FIREWALL #show curpriv
Username : enable_15
Current privilege level : 15
Current Mode/s : P_PRIV
If you're using Authorization and Accounting it's recommended to stick with your current behavior. -
How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?
cbkitche wrote:
How do you change the old Apple ID username and password to the updated username and password in order to get updated apps from the app store?
Do you mean you kept the same account but you only updated your AppleID?
Just log out and log back in with new ID.
Note that the AppleID is embedded into the item at purchase and cannot be changed.
However, when you change your AppleID, it will link the old account name to the new account name so you will not have any problems updating apps using the new AppleID. -
I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.
It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list. -
I would like to use my iCloud email address as the username.
Is this possible?No. Apple will not merge Apple IDs, and you can't use the same username and password for multiple IDs.
-
What are the defaul username and password for SQL Plus ?
hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1
You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
When you install it, you'll be given several options about the type of database you want.
But before you install anything, you should read the installation manual for your platform. -
Wna problem - pops up for username and password
We have setup wna according to Oracle's document. But when try to access the portal home page, instead of auto login with the windows username and password, it pops up the login pop-up and ask to enter username and password.
Anyone encounter this before? thanks.Hello byroncheng. Welcome to the Apple Discussions!
I suggest try using the AirPort Utility in "manual mode" instead for PPPoE setup...
Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
Internet - Internet Connection
o Connect Using: PPPoE
o Username: <your PPPoE account username>
o Password: <your PPPoE account password>
o Verify Password: <re-enter your PPPoE account password>
o Service Name: (Optional)
o Connection Sharing: Share a public IP address
Internet - PPPoE
o Connection: Always On
o Disconnect if Idle: Never
o IP Address: (provided by ISP)
o Subnet Mask: (provided by ISP)
o Router Address: (provided by ISP)
o DNS Server(s): (provided by ISP)
o Domain Name: (provided by ISP) -
What is the default username and password for administering my f4500 deskjet printer?
I need to administer my F4500 Deskjet through my web browser, but do not know the username and password. I presume there is a way to default the settings, but I need to know the defaults. Please provide the default username and password for web access.
Thanks.The default username is Admin, but the password is blank by default. Somehow, a password was added at some point.
You can try going to the EWS and going to Settings and looking for a password reset option in the Administrator Settings section. If it is there, it will be the only way I know of clearing the password on this particular printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
What is the default username and password for a Airport Time Capsule 3TB
What is the default username and password for a Airport Time Capsule 3TB
There is no default user name on any of the AirPort routers, but the default password is......
public -
What is the default username and password for SR520
What is the default username and password for SR520.
ThanksThe default username is admin. The default password is admin. Some good info on (lab 7A):
https://supportforums.cisco.com/docs/DOC-9646
Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc. -
I accidentally clicked on the remember username and password for a site and I want to undo it. How can I do this?
*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
You can remove a saved password here:
* Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
*http://kb.mozillazine.org/Deleting_autocomplete_entries
*http://kb.mozillazine.org/Password_Manager -
Why can't I sign into my iMessage with the correct username and password?, Why can't I sign into my iMessage with the correct username and password?
Are you trying to sign in with App Store Apple ID or, another ID that isn't associated with your device?
Have you tried contacting Apple Support?
http://www.apple.com/support/ipodtouch/contact/ -
I want to sync my iphone, ipad, and macbook with the same username and password, is this possible
i want to sync my ipad, iphone, and macbook with the same username and password. is this possible and if so, how do i do it?
You mean with the same iCloud account?
If so, yes this is possible by accessing the iCloud account with the Mail.app on your Mac and with the iPad and iPhone Mail app. This allows for keeping server stored email account mailboxes synced between all three, syncing contacts, calendar events, notes, and Reminders synced between all three, and the same with the iCloud Photo Stream. In addition, you can have music, books, and apps purchased/downloaded from the iTunes store with one device automatically downloaded on the other devices.
Maybe you are looking for
-
TS3276 When I try and access my sent items- mail quits due to an error? How do I resolve this?
Just last eek, the mail started generating an error message, when I try to access my sent items folder. I can receive and send emails but for reference of items that I have sent, I cannot access them as it says that 'mail quit unexpectedly'. Please c
-
Swap "Reply All" To/CC recipients in Mail? "Followup" button?
Many many times when I need to follow up on a multi-recipient email message, I find myself choosing "Reply All" and then manually swapping the contents of the To and CC recipient fields. The problem is that if I "Reply All" to something that I previo
-
Using Subquery returns more than 1 ROW.Please guide
Hi I am using inner join to return back a row Now,when I use the sub query.I get the message: ORA_01427 : Single row subquery returns more than one row select t.trade_id from trade t inner join prod_desc p on t.product_id = p.product_id inner join
-
Difference In RFC Adapter and XI proxy
I am using RFC adapter for master data and XI proxy for transaction data , can anyone tell me what is major difference and what is negative point in using RFC adapter Thanking you sridhar
-
Stacked Bar Plots in Mixed Signal Graph
Is there a way to have a stacked bar plot compiled and displayed in the mixed signal graph indicator from multiple plots as inputs?