Authentication Query- SAP Authoring Environment connectivity to Portal KM

Hi,
We have to use SAP Authoring Environment tool to upload the LSO training content into Portal.
We installed, configured and connected to the Portal KM using AE successfully.
We noticed one thing after connecting to the Repository Explorer in AE, system prompts to enter the user id and password for ECC system. After supplying right ECC user details system directly showing the Portal KM Master Repository content without asking to enter the Portal user id and password.
Can anyone share how can we see the Portal KM Master Repository content without supplying the Portal user details?
Thanks
Phani

Thanks for your response.
No, it is not anonymous portal.
If you try to open the same portal url outside the AE, system prompts the user to enter user id and pwd.
But if it is inside AE, as I mentioned earlier after giving ECC user details and click on OK button system directly showing the Portal KM Master Repository without asking Portal user id and pwd.
Thanks
Phani

Similar Messages

SAP Authoring Environment and Windows Vista

Has anyone had success installing SAP AE 600 + on windows vista?
I have tried multiple times with no avail.

Hi Alan,
I have uploaded AE on Windows Vista only.
Check on the Service Market Place. You will surely get it.
"LSOAE04_0-10004836" this was the name of the one which we downloaded.
Good luck!
Regards,
Shweta Thakkar

Learning Solution- Authoring Environment

Hi,
I am able to create courses in Authoring Environment which can be run in Content Player.
How do an user of portal access the course created using Authoring Environment in Enterprise portal ??
I have released the course, and it is available in KM content(CMS).
My portal user uses stsndard BSP pages available in Business Package BPLEARN502_0-20000624.
Regards,
Debasish

Hello,
1. How are all these 3 connected?
SAP Learning Solution consists of a Web-based learning portal, Training Management in the SAP back-end system, and an authoring environment.
Depending on your role in the company, SAP Learning Solution offers you the environment to enable you to competently fulfill your tasks.
Training Management supports both Web-based learning methods and classroom learning by providing access to the virtual learning environment in the learning portal. Training Management is an integral part of SAP Learning Solution.
2. Who's responsibility is it to create content or use the AE? i.e. is it the functional consultant or the end users?
As an author or instructional designer, you are responsible for the course content:
○     You create and structure the course content and tests.
○     You store the created content in the Content Management system.
○     You publish the completed content in the application system so that the course administrator can find and assign the reference to the relevant course content when he or she creates WBTs.
The Authoring Environment contains tools that authors and instructional designers can use to create course content and tests. External authoring tools can be easily integrated into the Authoring Environment.
3. Is their a document / link explainng the navagation of AE & CMS?
http://help.sap.com/saphelp_erp60_sp/helpdata/en/6a/a3a73b6594fc26e10000000a11402f/frameset.htm
4.Also, once a content is ready, how do we publish this to the end-users, how can we track it, activate it for tests, etc?
i.e. Assume I already have content in a CD, how should I publish it?
You need to import this data as metadata from the AE and create content and checkin, release anc publish in AE. Now in Training Managment system ( Backend) Create course type Web based training.
Now you will be able to find the course in the learning portal.

SAP LSO Queries on Portal and Authoring Environment

Hi Gurus,
We are in the Process of implementing SAP LSO in ECC 6.0 environment.
Can the gurus give some pointers on the following quries:
Portal / Authoring Environment:
1. How does the Collaboration Functionality Work in LSO Portal? Can you provide me a pointer for any documents or links the configuration and set up.
2. I tried to install the LSOAE 6.00 in my PC. The Installation was successful but I am not able to open the application. I already have JDK 1.4.2 on my PC. Is there anything else that I need to do for opening the application?
3. Can we link a PPT directly from the CMS without using the Authoring Environment? If so can you provide me the details on how this can be set up. ( Will the WBT functionality work without the Authoring Environment in SAP LSO).
Please provide information.
Thanks and Regards,
Madhan.

1. How does the Collaboration Functionality Work in LSO Portal? Can you provide me a pointer for any documents or links the configuration and set up.
In general the KMC component is used for Collaboration, With infotype
Collaboration Room (Infotype 5045)
refer link for more detail. [http://help.sap.com/erp2005_ehp_03/helpdata/EN/45/5abb3f8e236d3fe10000000a114084/frameset.htm]
2. I tried to install the LSOAE 6.00 in my PC. The Installation was successful but I am not able to open the application. I already have JDK 1.4.2 on my PC. Is there anything else that I need to do for opening the application?
Pls update the JRE to latest version.
3. Can we link a PPT directly from the CMS without using the Authoring Environment? If so can you provide me the details on how this can be set up. ( Will the WBT functionality work without the Authoring Environment in SAP LSO).
No you can't do that, U need to publish any content form AE only. So that u can update the Publisher Database.
Manually u can have the content in CMS, but no tag to it for SAP or in AE. Repository
Amith Ingua
Edited by: Amith Ingua on Jun 23, 2008 10:21 AM

How to build a WEBI query on a SAP NANA OLAP connection?

hi fellows,
we all know that a relational connection can be built to SAP HANA database, and we build data foundation, biz layer to publish it to the repository, so that we can create a WEBI report based on a query to visit the universe.
However, does anybody know how to create a WEBI query on a SAP HANA OLAP connection? Since we don't need to build any data foundation on it.
I created a sap hana olap connection, but failed to find anywhere to publish it? Can anybody help?
thanks,
Jennifer

Hi Jennifer,
Check SCN thread http://scn.sap.com/thread/3493857.
Also check below for Creating a SAP Universe on HANA: Best Practics.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00922ede-de2f-2f10-c2aa-f9b0f6495d34?overridelayout=t…
Regards,
JC

Oracle 10g Rel 2 - Proxy connection authentication with SAP User ID

Dear Experts,
We are currently doing some research and planning to upgrade SAP R/3 4.6C to ECC 6 and upgrading Oracle from version 9.2 to 10.2
In upgrading to Oracle vers. 10g Rel 2, we got advised that Oracle has apparently introduced a new proxy connection authentication, in which the SAP user ID is given limited privileges (create session only) ??
If you have any information on this or known any impact about this issue, please advise us.
Thanks in advance.

Thanks for your help, Kaushal.
I also found the SAP Note 834917 (Oracle Database 10g: New database role SAPCONN and it seems to be on a right direction to cope with that problem.
- For Oracle releases earlier than 10gR2, the CONNECT role includes extensive database authorizations and the more restrictive CONNECT as of 10gR2.
- To overcome this restriction, SAP need to find a way to compensate this, so does it come SAPCONN.
- SAPCONN is the new SAP-specific database role, which is defined to support the normal SAP applications operations (CONNECT, RESOURCE and SELECT_CATALOG_ROLE).
Once again, thanks.

"Error #2032" while trying to import BEx query through SAP Netweaver BW connection in Dasboard

Hi Team,
BO server version: 4.1 SP3 Edge edition
Dasboard Version: 4.1 SP3
BI Version: NW 7.4 SP7 (ABAP only)
We are getting Error #2032 while trying to import BEx query through SAP
Netweaver BW connection in dasboard Xcelsius.
Please suggest to sovle this error.
Regards,
Vinay Shrimali

There are several notes about this error - please see http://service.sap.com/sap/support/notes/1856691
http://service.sap.com/sap/support/notes/1801130

METADAT in SAP LSO Authoring Environment

Hi,
Can i know the importance and use of metadata in Authoring Environment in SAP LSO.
Thanks in Advance.

Hi Piscian
The basic concept of any matadata is to provide Data for the data provided.
In LSO AE the Metadata helps to give two categories of data Internal and External although it is not mandatory to fill all the information on it, the more information you provide on the matadata fields the more better the maintenance of the data and helps in good and faster search for the content from the CMS.
If the content for E learning is more in no., various versions and multiple content designer working on it its better to maintain matadata.
For more information please refer to [http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/01e73edcc12c9ce10000000a1553f6/frameset.htm]
Amith Ingua

Authoring Environment Tutorial or SAP Class

Hi ,
In order to learn the details of Authoring Environment ( LSO 300 or LSO 600 ) , what is the best ? SAP class HR270: SAP Learning Solution Overview, seems the only class were Authoring Environment is presented , is HR270 a good class (enough detailed) ?
Or if somebody as a link to Authoring Environment tutorial, that will be also welcome .
Thank you .

Sorry - not sure I understand the second half of your question.
Basically, if the test is 3rd party and SCORM compliant, then 'Pass/Fail' results will be passed to the backed ERP tables. If the provider puts results in the 'suspend data' field, you will be able to report on those with a custom report.
If the test is created in the AE using the testing tool, then results should be passed to the backend (pass/fail and test item stats) as long as the test is not a 'self-test' (must be a pre-test/post-test or stand-alone test.) And if you require passing of the post-test to pass the class, then you can inhibit the learner from receiving a qual. Hope this helps.
Cheers,
Sharon

Connecting SAP PLM system to iview portal.

Hi experts i want one clarification on process of connecting SAP PLM system to iview portal.
here my scenario is SAP PLM->>>XI--->>>WEBSERVICES
RFC-->>XI--->>>>SOAP
1---->>here i have to get the list of all materials from SAP PLM using iview as
front end tool.
2---->>and the next thing is if the material is camera means it should require the
lengs software for the camera.In the iview we can select the material
for upgrated software.
3--->>after that the input parameters wil be sent to webservices
(some website) using XI part(mapping and all) and the response should come back then it has
to be stored in the SAP PLM system.
please clear me all the above questions.
thanks & regards
babu

HI,
See
1) Request is sent from the Portal.
2) Web Dynpro application is called through the URL.
3) Web Dynpro app makes use of Web Service based Model in sending SOAP request to XI.
4) SOAP adapter converts the incoming SOAP message into XI Message.
5) Synchronous call is made from XI to R3 backend using RFC adapter.
6) Response is mapped and routed back as SOAP message.
Necessary design steps in interface objects, mapping objects and Business process are created according to the functional requirements.
Sender Soap Communication channel is setup in Configuration along with other essential configuration steps.
WSDL is generated for the message interface in Integration Directory using Tools-->Define Web service.
Override the default URL with following while generating WSDL.
See the below link
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards
Chilla

Connect the portal to backend SAP R3 system which is on VPN

Hi All,
I have install local portal on my machin & trying to connect the SAP R3 to backend.
But I am accessing SAP R3 through VPN.
So I am getting connection failed.
Can u please suggest me some other way to connect SAP R3 backend system though VPN?
Usefull answer wil be awarded.

Hi nilima,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ac81c690-0201-0010-c4b4-c72618f3590d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9a3cc590-0201-0010-bcb9-ab2ef5673287
and also your other thread.
PradeeP

Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas Budrys

Dear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas

SAP Learning Solution - Creating Tests (Authoring Environment)

Hi Everyone,
I wonder if someone can help:
1. How can one change the background of a test to another colour to change the look and feel?
2. How does on create a test that is displayed, one question per screen and then a next/continue button to proceed to the next question.
3. A person must on start the test once and not be able to select start test again.
Your assistance would be appreciated.
Kind regards,
Vince

Question:
Hi Debbie,
We are implementing Learning Solutions 300.(we are using LSOFE300 LSO300 J2ee engine for content player).. We are able to create the Learning Nets in Authoring Environment and trasnport the same to Master Repository...and in master repositiory we are able to release the course
Please let me know the tables where this Learning Nets will be stored.. and also how to get the learning nets from Master Repository to the relevant tables (Necessary Configurations)
(Under Master Repository In the repository explorer The Release button is active...But Publish button isnot active...)
Thanks in advance..
Raghav
Answer:
Hi
Sorry for the delay:
We only installed LSO 200 and now we are upgrading to LSO 600. I am not sure if it is all the same. I do not know of tables that is updated with the learning net info; according to me it is only on the server and Content Manager.
When you release a learning net, it gives you an option to tick a box to publish it after the release; see below:
We make use of epiuse to assist us on the consulting side. Please let me know should you need a contact person there.
Regards
Debbie van Zyl

Connecting Enterprise Portal with SAP ECC 6.0 for ESS/MSS

Hi,
I am trying to connect my Portal with the ECC backend but getting the error "SAP_R3_SelfServiceGenerics_MetaData". However when I tried to set the configuration in the JCo destination, I am not able to locate the message server for my ECC instance in the configuration page.
Any idea on this?

Hi,
Do the following steps.
1. Login to your SLD URL
http://hostname of sld:5<NN>00/sld
give the input as administrator username and password.
Once you are IN.
click on administrator TAB
Click on Profile TAB
In section TAB select DATASUPPLIER
Fil the detail in GATEWAY HOST and GATEWAY SERVICE ( SAPGW<NN>)
Gateway information should be on newly install gateway instance.
Then click on save.
Again click on Administrator TAB and click on STOP SERVER and then click on START SERVER.
Once above actvity done on SLD syste,.
Then go back to your ABAP stack in RZ70 and mainain the neccesary detatils and start the job, it should work now.
Thanks
Anil

HTTPS connection from portal to external webserver

Hi,
I am looking for a way to open a HTTPS connection from portal server to an external webserver. According to <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e2/71c83edf72e16be10000000a114084/content.htm">SAP</a> the code should look like
KeyStore keystoreCAs = ...
SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
Does not look difficult, <b>but how do I create the keystore object</b>? The keystore object should somehow be connected to the portal server's keystore which manages the certificates of trusted Certificate Authorities.
Any ideas?
Regards,
Martin

Hi,
meanwhile I solved the problem by my own. The solution slightly simplified is given below.
javax.naming.InitialContext ctx = new javax.naming.InitialContext();
java.lang.Object o = ctx.lookup("keystore");
com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub manager = (com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub) o;
java.security.KeyStore keystoreCAs = manager.getKeystore("TrustedCAs");
com.sap.security.core.server.https.SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
java.net.HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
For connecting via a proxy the host name and port number of the proxy have to be set as System properties using "https.proxyHost" and "https.proxyPort".
java.util.Properties systemSettings = System.getProperties();
          systemSettings.put("proxySet", "true");
          systemSettings.put("https.proxyHost","192.168.0.1") ;
          systemSettings.put("https.proxyPort", "80") ;
Additionally you have to make sure that the server's certificate is issued by a trusted Certification Authority (Must have an entry in your Keystore "TrustedCAs"). To verify this use the Visual Administrator and view service "Key Storage".
Regards,
Martin

Authentication Query- SAP Authoring Environment connectivity to Portal KM

Similar Messages

Maybe you are looking for