Authentication support for Apex 4.1 and 3.2.1.00.1 on Active Direct 2008 R2
Hi,
We are about to upgrade our domain controllers to Windows Server 2008 R2 from Windows Server 2003.
We have 2 Apex production applications running on:
Apex 4.1 and Apex 3.2.1.00.11., both of which authenticate users against the domain. Can anyone confirm whether upgrading our Domain Controllers to WINDOWS SERVER 2008 R2 is supported or likely to require changes? Neither application points to a specific DC for authentication, they simply point to the domain top level.
Thanks,
Andy
That's a shared drive. And it must be allowed because our current production APEX applications have been linking (and still do) to files for several years now. Only my fresh install of APEX 4.1 doesn't link.
Similar Messages
-
Is there Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii?
I need Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii. Is there a Camera RAW version for me?
Thanks for your help. I checked out DNG on YouTube and understand more
about it. I downloaded the DNG converter and transferred in files from my
camera. Then I imported into Lightroom. It works! Thanks again.
On Wed, Nov 19, 2014 at 5:56 PM, Jeff Schewe <[email protected]> -
Hebrew support for nano 2nd gen and ITunes
Hi,
I have a new ipod nano. I've installed ITunes, and all my hebrew named files are being displayed with strange font (Giberish)
Is there any way to get hebrew fonts support for the ipod nano and the ITune 7.0 software ?
DaniI know that this question has been asked before on these forums. Have you done a search for this regarding Hebrew on these forums? Although the links provided above do not offer support for the nano. Have you tried doing a search on google for a possible solution to your question. It might be good to leave feedback regarding support for hebrew text for the ipod at the link below.
http://www.apple.com/feedback/ipod.html
GFF -
Hi Bentley,
I wanted to tell you that an important link you posted does
not work and says "Sorry, this page is not available".
It is in your post entitled "Locked [ADOBE FYI] : Getting
Support for Flash Player 10 and Issue Tracking post", and is at
http://www.adobe.com/cfusion/webforums/forum/messageview.cfmforumid=44&catid=184&threadid= 1400586&enterthread=y.
The link that is non-functional is "If you have issues
installing Flash Player 10, first troubleshoot your issues using
http://www.adobe.com/support/flashplayer.
Read the technotes, do some testing.".
I just wanted you to know, since you have gone to all of the
effort of posting it. I apologize for having to start a new thread,
but I was unable to post to your thread, since it is locked and
read-only.
This is the issue I am dealing with myself, and desperately
need help with. :)
Thank you so very much,
KarenHi Bentley,
I just noticed something. The link that I pasted, to your
post, does not work either. I noticed why, however, and it seems to
be why the link in your original page does not work, and why the
link in my post that goes to your post does not work.
It seems to be that if a link has a period after it (i.e., if
it is at the end of a sentence), the period is incorrectly included
in the "real" link. Somehow, whatever mechanism that processes the
post has a mini bug in it.
If you go to the link that is results in "Sorry, this page is
not available", and look up into the browser address bar, you will
see the period there each time.
I just thought that I would point this out, too, so that the
web techs in charge of the workings of the forums could look into
it.
Here is the original link, without a period after it, to your
original page.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1400586&enterthread=y
Thank you again,
Karen -
how can I install asian script for language support for bangla in safari and install a font? Some websites are working fine in ipad and iphone4 but not in mac osx supported imac or macbook. Example: www.sonarbangladesh.com.
You just need to install a font, like one of these:
https://sourceforge.net/projects/onkur/
http://www.ekushey.org/?page/osx
For non-Unicode sites, see
http://m10lmac.blogspot.com/2011/04/reading-non-unicode-indic-language-web.html -
[SOLVED]Support for cores revision 0x17 and 0x18 disabled...
Everything is perfect on my arch linux setup except the following message I get at boot
Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
Help please
EDIT: After some googling I found a spanish website and did the following
Uncommented '#RuntimeWatchdogSec=0' in /etc/systemd/system.conf
And now it finally stfu. I've also added in the boot parameters after quiet splash loglevel=3
Last edited by sexyzero (2013-10-01 12:13:04)I did, you linked to it already
I slightly modified modemmanager-git in the AUR and added some dependencies, the git version now works for me. -
JSONP support for APEX RSS feed
Hi,
We have an APEX application that leverage's APEX and UCM API to create a RSS feed that is displayed on the Content Portal.
http://contentportal.oraclecorp.com/
The feed XML is converted to a JSON object and displayed on the home page using jquery.
Up until last week this feed was displaying fine but now its broken and can no longer be seen on the home page.
Our logs indicate that the feed content is being pulled as before without errors.
https://apex.oraclecorp.com/pls/apex/IBUSCP.RSS
A test page created to investigate the issue shows the following error -
Resource interpreted as Script but transferred with MIME type application/rss+xml: "https://apex.oraclecorp.com/pls/apex/IBUSCP.RSS?callback=jsonp1347857472289&feed=1&itemCount=20"
URL to the test page is :- http://apps-stage.oraclecorp.com/rss-test.html
Could this possibly have to do with the recent upgrade on the APEX server as this worked perfectly earlier?
Could the JSON support for RSS feed might have been affected?
Thanks and Regards,
Priya JetleyYour servers are in a personal network and we can not connect to them without setting up some kind of vpn connection.
I would suggest that you install firebug in firefox and just look in the console what is happening.
Firebug can monitor json to.
Regards
Nico -
Two Factor authentication support for VMWare View
Happy to inform you that ArrayShield IDAS Two factor authentication solution has added support to VMWare View. As other product vendors, the integration happens out of the box using RADIUS. Secure and almost nil downtime to add 2FA support to your VMWare View.
ArrayShield IDAS 2FA solution is a patented, multi-award winning product that stands out from the other Two factor authentication product for its innovative solution on using a simple plastic card and pattern combination to derive One Time Secret Code. This gets rid of various dependencies like Hardware token, Smart Card or Mobile networks. Kindly go through our product demo video to understand the product better.
http://www.arrayshield.com/products/howitworksFinally, this is what I looking. Thanks for giving the link.
-
How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?
I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
Thanks so muchhttp://www.apple.com/support/bootcamp/
Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task. -
Dropping support for Internet Explorer 8, and Firefox 20.x or below
Starting April 30th, we will discontinue support for all Internet Explorer 8 versions and all Firefox 20 versions and below. In order to continue using Business Catalyst Admin user interface without problems, you and your clients need to upgrade to a more recent browser:
Download Internet Explorer
Download Safari
Download Chrome
Download FirefoxThanks for your reply Shay.
We plan to officially support IE8 with the next patch release to JDeveloper 11g - currently planned for later this year.That matches what I wrote in my initial post in this forum thread about IE8 support.
We usually only certify browsers after they officially go production.That does not really answer my question (q1) in this forum thread.
It is more like, how can I assess that Oracle will support any successor(s) of IE8 or successor(s) of any currently supported browsers for ADF 11g applications in the future? How long will Oracle support "commonly used browsers" for an ADF 11g application I build today, so how long will I be able to use that application?
How do I answer such questions for ADF 11g applications that should be deployed on the internet (where, as some extranet environments, you typically have not that much (or no) control over which browsers your users use ... although some would like to argue with that, see forum thread "ADF Faces RC browser support and browser market share")?
(By the way, do you have any feedback for the forum thread "ADF 10g support for Internet Explorer 8"?)
regards
Jan -
Hello,
I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
And i am getting the following error.
DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
Status Code: -201025
Does my hardware support buffering ?
can i use the EveryNSamplesCallbackAO function ?
Any sample code, will be helpful at this time. Thanks.Hi yma200,
Are you using a USB 9263? If so, this might be of help:
http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
If it doesn't help, can you please post the code that you have that is causing your error?
Regards,
Bogdan Buricea
Applications Engineer
National Instruments -
Support for Olympus E-510 and E-410
Hi,
Will the upcoming 1.1 update provide support for the new Olympus E-510 and E-410? If not, when can this support be expected?
JimThis page shows all the supported formats.
Lightroom 1.1 will support all those in ACR 4.1
http://www.adobe.com/products/photoshop/cameraraw.html
Richard Earney
http://inside-lightroom.com -
Support for Olympus E-620 and Lens
I don't see any support for Olympus in ACR 6.2. Where is it?
The camera itself is supported. That means it is possible to work on the raw files in Camera Raw. But there is no support for the lens. That is a different profile. It will be necessary for you to wait and see if the profile is eventually provided, create one yourself, or see if there is one available online.
percyflewfirst wrote:
I am looking in ACR under lens corrections > profiles. No Olympus listed there. -
MO/MOAC supported for applications INV, BOM and ENG?
Hi All,
I have a general question about MO / Multi-Organization Access Control (MOAC). For which Oracle Applications products is MO / MOAC supported? Is this supported for applications Inventory (INV), Bills of Material (BOM) and Engineering (ENG)?
Thanks and Regards
CarolinHi Helios,
thanks for the links...
The reason I'm asking this is to verify if I need to do anything in terms of MO/MOAC (e.g. calling MO_GLOBAL.init ...) when using the following APIs:
EGO_ITEM_PUB.PROCESS_ITEM, BOM_BO_PUB.PROCESS_BOM, ENG_ECO_PUB.PROCESS_ECO and BOM_RTG_PUB.PROCESS_RTG
In the "FAQ - Multiple Organizations (Multi-Org)", in question "5. What E-Business Suite products are directly using the Multi-Org feature?" none of the products INV, BOM, ECO and RTG is listed...
Moreover, I can't find any tables with suffix '_ALL' for these products...
So is it correct to conclude that I don't need to do anything for multi-org support (e.g. calling MO_GLOBAL.init ...) when using the above mentioned APIs?
Thanks & Regards
Carolin -
Support for ActiveSync Smart Forward and Smart Reply still missing?
Hi,
am I right that current device OS (tested 10.3.1.1565) is still *not* supporting ActiveSync options "Smart Forward" and "Smart Reply"?
If so, is there an ETA when these options will be supported?
Thanks in advance,
FranklHi, anyone being able to answer these questions? Thanks, Frank
Maybe you are looking for
-
A whole bunch of issues here. I can't install any software. It started when iPlayer stopped working at all. This led me to try to update software versions such as Adobe Air to 3.5 (Failed) then quicktime player 7.6.6 as recommended (Failed) then the
-
Greetings Gurus... I need to generate a report to show the incoming payment discount taken during cash application to customers. For example, a customer has an invoice for $100, they pay only $99, the AR clerk puts $1 discount in the Incoming Paymen
-
I have purchased several albums under my regular Apple ID in iTunes. I have just signed up for the .Mac trial (which I am going to purchase) and I am going to start using my .Mac email as my primary address. The problem is, I want to change the infor
-
Message sent from XI but queue in waiting
Hi Guys, I am facing a strange problem in XI. First of all cleared all the inbound and outbound queues in XI. Then I ran an async service from XI. The flow is as follows. XI --> SCM system(PROXY) (PROXY)SCM>XI>HTTP So as per the flow the response cam
-
How to control Safari bookmarks?
I have thousands of bookmarks in Safari and there seems to be no way to control them better. Does anyone have good information on some of the Safari plug ins that I can download? Which one works better than another or problems? Firefox opens and show