Authentication tab SAP - BOxi Ent 3.1 and Int kit on AIX

Hello
Installation of BO-XI Enterprise 3.1 and SAP integration kit 3.1 on AIX.
Both products installed successfully. But on CM Console in authentication tab SAP
is not appearing. Also when we try to create new connection using universe designer
from clients (Windows) we get following error
u201CDBD: A runtime exception has occurred. (Licensed key checked failed.
Check that you are licensed to access SAP data source)
Regards
Upendra

Dear Stratos
version libsapjco3 is 64 bit for aix
eb components automatically deployed.
At present we are using temporary license key.
Following description may clear scenario.
BO-XI Enterprise 3.1 and SAP integration kit 3.1 on AIX installed successfully.
We are trying to create new connection to SAP BW system as data source using universe
designer from clients (Windows) we get error from one client
"DBD: An error occurred while trying to load the provider for transport sap.
Failed to load library MDA_SAP. System error message u201Cthe specified module could not be foundu201D
From another client (PC) error come as
u201CDBD: A runtime exception has occurred. (Licensed key checked failed. Check that you are licensed to access SAP data source)
when we checked on CM Console in authentication tab SAP is not appearing.
In short our BO system is not able to communicate with BW system.

Similar Messages

SAP authentication tab not enabled

Hi,
we have installed the bo xi r2 & the integration kit successfully on Unix server but when I log on to the CMC page. The SAP authentication tab doesn't get highlighted. what can we do so that I can edit the SAP authentication settings. Please give me some pointers to resolve this issue.
Thanks & Regards,
Phani.

Ok, the issue you face is usually related to the deployment of your SAP Java connector within your App Server. I recommend to go thru the deployment guide step by step again and if you still face the issue create a support message with SAP BO support. The support guys from the SAP Int Team should be able to connect remotely to you system and verify the deployment.
I hope this helps,
Tim

I was on Instagram and I clicked this link that lead me to safari but a box keeps popping up and it won't let me Delete the tab, can someone help me pleased??? I can't even use safari, is there a way to delete it or something???

I Was on Instagram and I clicked a link that lead me to safari and when I got there a box kept coming up and saying a b c d e f g.... And so on. It won't let me delete the tab and I can't even use safari, can someone please help!!!!!??????

Quit Safari completely, clear Safari and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the Safari app icon. Tap the home button or anywhere above the task bar.
Go to Settings>Safari>Clear History, Cookies and Data.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through a long procedure each time

I want new tab to open to home page and why does firefox not have a simple check box in the options because I can't keep going through the long tedious procedure each time I install firefox. It is something that should be in the options tab , and I want to know why it isn't. I am totally frustrated with firefox and getting ready to switch.

You can use the SearchReset extension to reset some preferences to the default values.
*https://addons.mozilla.org/firefox/addon/searchreset/
Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

Graphical errors. The Address dropdown box is blacked out, and goes normal when highlighted, tabs are blacked out, buttons are half missing etc etc. This ONLY happens in firefox, reinstalled and turn all add-ons off and it persists.

'''''thedanbot''''':
I am not sure that your image matches '''''Apoth's''''' description as I interpret it.
Have you tried Firefox Safe Mode to see if an Add-on is causing your problem?
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]

I purchased a 3TB Airport Time Capsule After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups and it wants authentication but no box is available to provide my administrator name can anyone help ?

I purchased a 3TB Airport Time Capsule to use with my Mac running latest Maverics. After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups from my small driveand it wants authentication but no box is available to provide my administrator name can anyone help ?

I overcame the permissions by allowing both paths to have read and write access to anyone but that didnt solve it until I copied it into the DATA directory which I created on the Airport Time Capsule.
I had already discovered the TIME MACHINE How to transfer backups but I am struggling still with the item and cannot currently get it to work. My setup seems to have created a wireless link to my router which is what I wanted and in that set up there are three options. I have simply gone for the extension of my network. I ignored the other option there which I cannot remember something like DNS? That may be the problem becasuse when I remove the Ethernet connector it just doesnt go anywhere.
I have also found I cannot update my TIME MACHINE software (currently 1.3) as although Apple tell me I should be able to set backups hourly daily or weekly I have only ever been able to run it hourly when i would prefer longer intervals so thought an update might be necssary.
Also tried to get an update for my Airport Utility (Currently 6.3.2 but cannot find one even though I have read there might be one available and again this might be the problem.
Have reset the Time Capsule now about a dozen times.
Following the instructions and trying to copy my existing backup it suggests you need to copy it to the root directory but that is when I get some sort of security issue and I found I could only get it to accept if I dragged my .backupdb to the DATA directory on the Time Capsule. I dont even know if I do this it will work when I come to use it.
I therefore found your reply of no more help than i had discovered but I hope you return to read this note because I really do need some help.
I am intending starting again in the next couple of days and fully documenting what I do and what I see and then as I suspect it will be no different and I will then seek an appointment at the Apple Store in Trafford Centre and if that proves unsuccessful then I still have time to return and become a dissatisfied customer with Apple for the first time in a long experience with Apple. I have noticed frightening notes on the conversations which point to problems of Mavericks working with Airport Time Machine!! So in the end it might not be me doing anything wrong. Unfortunately you do feel left out in the dark sometimes that is why I hope you can respond with a solution?

Text box in pages has blue tabs - how to undo these? and what is 'floating

how can i get the blue tabs to go away? what is floating text?
deb

You can use Shapes to write in but then you have to change the fill and line colour. The text boxes blue tabs doesn't show when printing and there are for letting text flow. you can have one box on pages 1 and connect it to a text box on page for and the text will flow over to the box on page 4 if there is enough text. Just like in the magazines, more folloews on page 4.

Giving access to 'Authentication' tab in CMC

Hi,
We have a user admin role in BO project which has access to only Users and groups section in CMC. We need to give access to Authentication tab in CMC for this group.
The reason behind this is - we have a user role imported from SAP BW to BO. Whenever a new user is assigned to this user its not getting automatically visible in CMC user list. We need to go to 'Roles import' tab and click update always. We have checked the 'Force User Syn' and 'Automatically Import users' checkboxes. Once the user is imported we have to assign it to one group in BO to complete the user creation in BO.
Please let us know if there is anyway we can give access to 'Authentication' tab alone in BO for a user / group
Regards,
Sivakami

Hi Ingo,
or you could simplify it and create those kind of roles already on the SAP side.
>> This was my suggestion also to the team, but BW security team thinks its a redundancy to create mapping roles in BW
In my opinion - if you have to go down to a user level as part of the role assignments or as part of the rights assignment you are complicating the administration view unnecessary
>> I explained the same, but they follow this in all other applications and they want the same in BO also. Let me discuss these options with the team.
Thanks for your prompt replies
Regards,
Sivakami

SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
Cheers,
Tim

Hello Tim and Wolfgang,
I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
However I did notice some indications which might be a help (based on 7.00!):
Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
@ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
Sorry that I can only help by speculating, because I could not reproduce what you have described.
Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
Cheers,
Julius
Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

Windows NTLM Authentication on SAP 4.6c (Platform AIX)

I am trying to use NCo 2.0 for C# .Net application with Web Service and C# Web UI.
My Users are in AD domain and need to authenticate on IIS via AD (Integrated NTLM)
I need to implement single sign on for SAP integrated application.
As per NCo documentation: I need to set-up trust relationship between IIS and SAP, use this trusted user (DOMAIN\IUSR_SAPPOOL) and send active directory id as external id in connection string. All transaction should run with external user id context.
Can someone help me with following question.
1. Does NTLM trust relationship / authentication on SAP running on AIX? or Do I have to setup kerberos authetication?
2. What SNC library needed for SAP (AIX instance)?
3. How can I configure NTLM authentication on SAP (AIX instance) The NCo 2.0 documents only explains SAP (MS instance) configuration.
What option do I have to get Single Sign On working?
Any help is highly appreciated.
Regards and Thank you in advance.

> Hi Reiner,
> Thank you very much for response, this is helpful
> information.
If you consider an answer as helpfull, please mark it with the button on the left side :-).
> My options are pretty much limited,
> I can't use NTLM since, AIX will not accept trust
> -- NTLM Auth will not work with AIX
> -- Kerberos auth have to have third party tool like
> CyberSafe for SNC trust relationship.
As I wrote, you can use any SNC provider. Especially Secude would be interesting, as it is available on all platforms.
> I planning to try using SSO as mentioned in "Enabling
> Single Sign-On for ASP.NET Applications in Enterprise
> Portal 6"
> Is this approach works with EP 5.0?
This is a completely different approach: In the stuff I was writing to you before I was assuming that IIS would do the authentication. The other approach is that SAP Portal does it. This also works - EP 5.0 should be fine - but it works completely different. E.g. you doesn't need a trusted connection for SSO with MYSAPSSO2 ticket.
> If any one has "sapsecu.dll" please send me at
> [email protected] with same size as stated in
> this document.
This DLL is not allowed to be exported into some countries because it contains strong cryptography. You usually get it via your local SAP subsiduary.
> My SSO ticket did not get created after following
> steps in document, I am suspecting either sapsecu.dll
> or veryfy.pse is wrong?
Did you find a MYSAPSSO2 cookie in the request?

Windows Integrated Authentication to SAP R/3

Hi,
I dont know weather this issue has to be posted here or in WAS or GUI.
Is there any way to do the Integrates Windows Authentication to SAP R/3. Once the Users logs in to the Network domain adn then to SAP GUI, the User should not prompt for User id and should directlt take in to the Role Menu.
I know for Portal it is possible, but i am not sure for R/3. Please let me know if there is any documentation for the same.
Thanks & Regards
Sumanth

Sumath,
there are various variants to do so:
If your R/3 is running on Windows (and in the same / trusted domain), you can use SNC with either NTLM or Kerberos authentication
Otherwise you can log on with SAP Logon Tickets. You mentioned already that you know NTLM/Kerberos is feasible with EP. Now, if you simply integrate your R/3 systems in EP by means of SAP logon tickets you have essentially a smooth SSO for your users.
Finally, you can use ITS up to 6.20 on Windows to SSO to R/3 (the latter on not neccessarily on Windows, too). Simply setup webgui, active SAP logon tickets and configure the PAS service to use Windows authentication.
Whatever you decide on, al alternatives are a piece of cake to set up.
Regards,
Dominik

Problem hiding Tabs in Tabstrip of My Trips and Expenses WD ABAP iView

Hi,
My requirement is to hide the thet tabs ALL MY Trips,All my Travel REquest,All my travel Plans,Pending expense report from the tabstrip ALl my Expense report in Travel and Expense Application.
I have gone through the thread and the sap note mentioned in
Re: Problem hiding Tabs in Tabstrip of My Trips and Expenses WD ABAP iView
My problem is tabs that has to be deleted /hidden does not present in the Development system, but exist in the QA or the prd system.
So how to implement the note when data is not present in the dev system and only exist in the QA/PRD system.
Pleas eprovide me your valuable inputs.
Thanks in advance.
Pooja

Implemneted the note and problem is solved.

Boxes in PDF, RTF and HTMLCSS format

Hi People--
I am having a strange problem when I execute the Report
( Reports 6i RDF running against Reports 6 Runtime on Solaris) and dump the output to PDF, RTF or HTMLCSS formats.
There are boxes all around each of the fields. The same report has no boxes when I run and print it in the Live Previewer on Windows. HTML format works fine except that all
the borders have disappeared and it looks too pedestrian.
Any thoughts?
thanks in advance!
Vinny.

Navneet--
There seems to be more to it than this. This problem
occurs even when I run the RDF on Windows and generate
it to a file of formats RTF, PDF and HTMLCSS. Every
field has boxes around it though there are no borders
for any of the fields. Is there some property that I
am setting right or something I have to set to make
the conversion smoother and look authentic.
thanks again!
Vinny.

SiteMinder Authentication Realm has NOT been correctly configured and...

Hi All,
When I set the realm (associated with the authentication provider) as UNPROTECTED, I see the following in my AUWebAgent.log (authentication web agent log):
[31 Aug 2006 16:19:07,050] [main] [INFO] Configuration: Support for TP cookies is : ENABLED.
[31 Aug 2006 16:19:07,050] [main] [INFO] Configuration: DefaultAgentName: bppttest.micron.com.
[31 Aug 2006 16:19:07,051] [main] [INFO] Configuration: FilterDomainName: DISABLED
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Creating caches ..
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Cache Timeout specified. Default is 600 seconds
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Resource Cache Size specified. Default is: 0
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Authentication Cache Size specified. Default is: 0
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: No Authorization Cache size specified. Default is: 0
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: Auditing is DISABLED
[31 Aug 2006 16:19:07,051] [main] [DEBUG] Configuration: Caching for anonymous users is DISABLED
[31 Aug 2006 16:19:07,053] [main] [DEBUG] The SiteMinder Resource Manager is checking if resource "/smauthenticationrealm" is Protected.
[31 Aug 2006 16:19:07,129] [main] [INFO] Resource "/smauthenticationrealm" is NOT Protected.
[31 Aug 2006 16:19:07,129] [main] [ERROR] The SiteMinder Authentication Realm has NOT been correctly configured and is unavailable.
Additional info:
Using SiteMinder 5.5 on WebLogic 8.1 sp5
When & if I set all my realms as protected then I am unable to startup my servers and get the folowing error:
We are trying to setup (as in intergrate SiteMinder with Savvion) SiteMinder v2 with weblogic 8.1 sp 5. We have appropriately included the references to variours siteminder related jars as per Netegrity's ASA document. We aren't using any webserver, instead wewould be using launching page (which be a protected resource). The following is the installation, configuration, and testing information related to various siteminder components:
SiteMinder Identity Asserter (IA) - installed, configured & tested successfully.
SiteMinder Authentication Provider - installed, configured & test result -> Unsuccessful.
SiteMinder Authorziation provider - installed, configured & test result -> Unsuccessful.
Has anyone seen anything similar to the following? My guess on the above is that it looks like it is trying initialise siteminder stuff every time we start each of the servers(admin, ejb and portal). Since the initialisation happens for the 1st time) when the admin server is started, an error is thrown complaining about not being to initialise when we start either portal or ejb after that. If this is true then is there a way around this problem?
The Admin Server starts fine. But when we try to start either of the ejb or portal server, we get the following error:
<Aug 16, 2006 4:03:01 PM MDT> <Critical> <WebLogicServer> <BEA-000364> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
        java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
        java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:225)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java :581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm (SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize (SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
>
<Aug 16, 2006 4:03:01 PM MDT> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException : failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
        java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9 ]>
The WebLogic Server did not start up properly.
weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String ;); nested exception is:
        java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:225)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:283)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java :581)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm (SecurityServiceManagerDelegateImpl.java:700)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)
at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize (SecurityServiceManagerDelegateImpl.java:876)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)
at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:821)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:669)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:343)
at weblogic.Server.main(Server.java:32)
Reason: weblogic.security.service.SecurityServiceRuntimeException : [Security:090371]Problem instantiating Authentication Provider weblogic.rmi.extensions.RemoteRuntimeException: Unexpected Exception - with nested exception:
[java.rmi.MarshalException: failed to marshal invoke(Ljavax.management.ObjectName ;Ljava.lang.String;[Ljava.lang.Object;[Ljava.lang.String;); nested exception is:
        java.io.NotSerializableException: com.netegrity.siteminder.weblogic.sspi.auth.a9]
Any help would be appreciated.
Regards,
Prashant

but it just says it cannot repair due to another program being installed.
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Oracle 10g Rel 2 - Proxy connection authentication with SAP User ID

Dear Experts,
We are currently doing some research and planning to upgrade SAP R/3 4.6C to ECC 6 and upgrading Oracle from version 9.2 to 10.2
In upgrading to Oracle vers. 10g Rel 2, we got advised that Oracle has apparently introduced a new proxy connection authentication, in which the SAP user ID is given limited privileges (create session only) ??
If you have any information on this or known any impact about this issue, please advise us.
Thanks in advance.

Thanks for your help, Kaushal.
I also found the SAP Note 834917 (Oracle Database 10g: New database role SAPCONN and it seems to be on a right direction to cope with that problem.
- For Oracle releases earlier than 10gR2, the CONNECT role includes extensive database authorizations and the more restrictive CONNECT as of 10gR2.
- To overcome this restriction, SAP need to find a way to compensate this, so does it come SAPCONN.
- SAPCONN is the new SAP-specific database role, which is defined to support the normal SAP applications operations (CONNECT, RESOURCE and SELECT_CATALOG_ROLE).
Once again, thanks.

Authentication tab SAP - BOxi Ent 3.1 and Int kit on AIX

Similar Messages

Maybe you are looking for