Authentication through external trust doesn't work with rodc

We have an external sharepoint environment (B.com). For this environment we created a external trust. They trust our accounts (from A.com). On our side we have a site with an DC and a RODC (also DNS server). This site is in a DMZ. All required ports
for communication with DC's on the inside are open. The DC is used to set up the external to be removed after that. At the b.com side we've created an conditional forwarder for a.com (the rodc is used for the forwarder).
This setup is working fine. Users from both domains can access the sharepoint portal. But when we shut down the DC users from a.com aren't able to logon. We want to remove the DC cause we don't want it in the DMZ.
From online research I concluded this is because it doesn't know in what site it's in. The RODC only publishes site specific srv records. The option to change reg keys for the RODC to be able to register its srv records in the non zone specific part of dns.
This is not an option since the firewall prevents access to the rodc. This will cause all kinds of delays on our network with authentication (there's an option to make the RODC the least favorite option but this still won't prevent it from being consulted).
Is there an option to solve this through DNS on the b.com side by manually creating the srv records (which all point to the rodc)? Or are there other options perhaps (or am I on the wrong track with the not knowing in which site it is and thus not finding
the rodc)? Thanks!

anyone? Any tips would be helpful.

Similar Messages

HP Pavilion G6 1006sh external display doesn't work with Windows 8.1

Hi All,
After performing a clean install of Windows 8.1 Professional on my Pavilion G6 1006sh I can not use my external Samsung monitor connected on HDMI port.
The windows install went smoothly without any issues the OS had builtin drives for all of the devices. So there is no unknown hardware in device manager there is sound, wifi, LAN, etc. As for video card I can see two different devices. There is a Generic Windows VGA and there is an AMD Radeon HD 7400M installed. The AMD Catalyst software was installed successfully. In windows graphic properties I can choose from two different video outputs, one is the General Windows VGA the other one is the Radeon. However windows detects monitor connected only on General VGA (which is the inbuilt notebook display) and nothing on Radeon so I can not use my external monitor.
Of course I tried to restart laptop / monitor many times, unplug / plug HDMI cable but no success. When I plug HDMI cable into laptop the monitor displays a message that it is connected but there is no incoming signal. The HDMI port both on monitor and laptop is working I used the same configuration with Windows 7 x64 Professional without any issues. It is only the operating system that changed.
I tried to remove the General VGA device in order to force using Radeon but after restarting there was nothing displayed on the screen, I couldn't see anything neither on inbuilt nor on external monitor so I had to restore a previously saved system configuration.
I tired to install the latest graphic driver to Radeon downloaded from AMD site but Windows crashed and restarted during the install process.
Please help me with this issue or make a statement that this version of Windows is not supported on this machine so I have to revert the previous system.
Configuration:
modell: HP Pavilion G6 1006 SH
RAM: 2x4 GB
OS: Windows 8.1 Professional x64 (HUN)
OS drivers: installed and updated automatically by windows
Antivirus: Symantec Endpoint Protection 12.1
Thanks,
Zoltan
This question was solved.
View Solution.

Hi there @nzole
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you installed Windows 8.1 onto your system, but now you cannot detect an external monitor with HDMI. I am happy to help you with this.
First, in answer to your question, this model is not supported for windows 8.1. It was only sold in versions that were configured for Windows 7. That would mean there are no drivers specifically customized by HP for this model for Windows 8.1. It is possible you could find an appropriate drive from a model that does support Windows 8.1 that may be close enough in terms of hardware, that its driver could work, but there is no guarantee.
Here is the support page for your model: HP Pavilion g6-1006sh Notebook PC
HP Products - What If I Don't See My Operating System?
Do you still have the Recovery partitions, or did you make a set of recovery disks, prior to installing Windows 8.1?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HT1222 MOTA External battery doesn't work with iOS 7

I have a MOTA external battery for my iPhone 5 which was working great until I update my phone to iOS 7. Now it starts charging for a few seconds, then stops and a message informs me that the battery case or the cable isn't certified. Is there a solution to this issue?

I do not know if the NOTA wires are considered certified but based on comments above they seem to fail even at the cost of 25$ for just the wire. That means wire and charger is 40$.
I think the mark up on Apple accessories is very high, how can deal extreme ship from china, without mailing fee, and charge less then 5$ for a charger and wire?
Why this sudden need for certified wires, I love my Apple products but I don't like the exaggerated accessory cost.

I have upgraded Acrobat Standard from version 8 through time until I am currently using version X, which doesn't work with Office 2013. Can I upgrade to version Standard XI?

Over the years I have upgraded Acrobat Standard from version 8 to currently working with version X.
However, since getting a new laptop it doesn't work with Office 2013.
Can I upgrade to Standard XI?

Upgrade pricing now only applies to version 9 and X. So if you have a retail serial number for X, you should be able to upgrade. (Or consider subscription).

Web of Trust no longer working with google and bing image searches

Hello All,
I have searched and searched but have not found an answer that matches my specifics. Any help would be appreciated.
I used to be able to do this but now I can no longer search and browse images on google or bing image search and have Web of Trust function. Here is how I am going about it.
What I use:
DuckDuckGo's annoymous google or bing image search link when I enter querries. Also, searching directly from Google's or Bing's image search page doesn't work with WOT anymore either.
Firefox 23.0.1
The following add-on's:
Add-block plus 2.3.2
BetterPrivacy 1.68
Flagfox 4.2.12
Ghostery 5.0.4
Google/Yandex search link fix 1.4.1
No Script 2.6.7.1
Web of Trust 20130515
If anyone has a fix for this please let me know.

I guess what I learned is that sometimes the best solution is to do nothing and wait for the problem to solve itself! Funny, this has never worked for me before.
WOT is now working for me but often for only the first few rows of images. That's cool that it is also working with bing images.
Boudica, thanks for understanding. I am new contributor/ question-asker here on mozilla and may not understand how things are done. I was just frustrated, getting an email saying that my question was answered, logging in to find that it wasn't.
Now we have the functionality that we wanted, right?

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Firefox command line option "-no-remote" doesn't work with profile.

I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
Please find below the command what I am using
firefox -P "stripped" -no-remote
firefox
If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
I use the -no-remote with firefox default than it works for the first time.
I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
firefox -P "stripped"
firefox -no-remote
(But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
Do you have any idea why this is happening?

IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

At least to 10.6.8. You must do this to upgrade to Mountain Lion.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.

Agilent board doesn't work with NI-488

I have an Agilent GPIB interface board, but it seems that it doesn't work with NI-488 software. I would like to know if there's a way to use these board with LabView because if it's not recognize by NI-488 software I can not use it in an application with Labview

As far as I know, NI-488 only works with NI's GPIB boards and other GPIB Interfaces.
I suggest getting an GPIB interface from NI. If you are looking for a cheap way to do this, try getting a USB-GPIB Interface. They are only $495. Also, ISA GPIB cards are only $395.
Alternatively, try installing the GPIB interface software for the Agilent board, and communicating with it through LabVIEW. Agilent may have a driver for this.

IPod Stuff doesn't work with my new iPhone

I finally sprung for the iPhone three weeks ago and I love it. But I think I'm going to have to buy more new stuff. Neither set of my portable speakers that I use with my iPod (5th gen. video) work with the iPhone. When I put the iPhone in the dock, I get some message about Airplane Mode. Music does play through the speakers, but they won't charge the iPhone. When I put the iPhone on its own charger and tried to use the auxiliary input on the speakers, there was only silence.
Do I need a special cable or something?
Also, my car charger for the iPod doesn't work with the iPhone.
Am I going to have to spring for another set of portable speakers? I've read that the Pure-Fi is compatible with iPhone.
Thanks!

Both my mini and my video iPod were USB -- not Firewire.
Both your Mini and your iPod with video synced via USB and charged via USB when connected to your Mac, but they also support charging via Firewire and most of the older 3rd party devices charged iPods via Firewire - your iPods include firewire pins in the connector for charging via firewire.
The first generation iPhone also syncs and charges via USB when connected to a computer, and the first generation iPhone also includes firewire pins for charging via firewire also, as your iPods include. The first generation iPhone does not support syncing via Firewire, but it does support charging via Firewire.
Apple removed the firepins from the iPhone 3G connector as they have done with all new iPods released after a certain date and for all new iPods to be released in the future. 3rd party device manufacturers were made aware of this so all new 3rd party devices must support charging via USB only or include charging via USB in addition to charging via Firewire if a new device is to be backwards compatible with older iPods.

New Thunar doesn't work with Launchy, Chromium

After installing the new XFCE 4.8, the new Thunar now doesn't work with Launchy, or Chromium. I haven't tried any other GUI programs that launch the file manager (Gnome-Do, Docks etc), but the only way to launchy Thunar now is via the XFCE Panel, or the desktop (via XFCE programs themselves, in essence).
I've tested this, and opening a normal folder or file with Launchy means nothing happens. I'm guessing that Launchy is using Thunar here to launch the folder/file, and it's not working. For some reason though, I can launch in /usr/bin, which I'm guessing might be because Launchy doesn't use Thunar for that (only guesses though)? Meanwhile, Chromium downloads can't be opened, and the directory that contains the download can't be opened either. When I click the button that launches the download, or opens the directory containing the download, nothing happens.
I have tried reinstalling Launchy and Thunar, to no avail. I haven't tried downgrading Thunar, but that's a process I'd rather not go through.
Last edited by louis058 (2011-01-22 21:22:50)

Hi!
I don't know Launchy, but Chromium use xdg-open script for figure out which DE (Desktop Environment) is running and then, launch the properly file manager. With the new version of XFCE, this script doesn't detect XFCE and consider a generic DE. There are many solutions, but I just modified the xdg-open script (/usr/bin/xdg-open) and replaced the line:
elif xprop -root _DT_SAVE_MODE 2> /dev/null | grep ' = \"xfce4\"$' >/dev/null 2>&1; then DE=xfce;
by a more logical line:
elif [ "$DESKTOP_SESSION" = "xfce" ]; then DE=xfce;
. It isn't the best solution because will be a new update for xdg scripts, I guess.
For Launchy, you can launch it in a terminal and see if say some kind of error, like Chromium did.
Cheers!
Last edited by Versuchen (2011-01-30 16:43:25)

Keyconfig doesn't work with FF 24.0. Is there a way?

I have just completed rebuilding my PC from a hard disk format. In doing so, I loaded the latest FF 24.0.
Part of my essential application was a script that used keyconfig to cause Easy Copy to send page source to the clipboard, where the script parses it. Unfortunately, keyconfig does not work with FF 24.0.
The write-up for Easy Copy starts to explain how to make it act on a key combination, rather than on mouse action without using keycopy - but then says how it doesn't need to, because it's too much effort, and besides - keyconfig exists and does the job - which, I agree, it used to, very well - but it doesn't any more.
What to do? If there is no other way, can I get a downgrade of FF that works with keyconfig?
There is a new add-on, key config (note the space), but it doesn't do what keyconfig did.

Hmmm...
The first time I loaded it was through the FireFox Add-ons tool, so that was the natural mechanism to use to do it again. Even now, it is listed on the tool - but a notice comes up saying that it doesn't work with FF 24.0. Before getting help from you, I was on the point of downgrading FireFox to be able to use the add-on with an older version.
Another solution to my problem (possibly a better one) would be if the writer of Easy Copy would give instructions for making a key combination to cause his add-on to respond to the keyboard without the intervention of keyconfig - hence only one add-on would be needed instead of two. He has made hotkeys for two of his functions - to copy the URL to scratchpad, for example, but there is no hotkey to copy the page source. I was going to suggest it on his web site, but it doesn't accept input.

The DB tools doesn't work with Microsoft SQL

I am tring to write series of waveforms to a database. The DB tools doesn't work with Microsoft SQL, but when i replace the SQL with Access, it works fine. I have to use SQL in the application.
Any advice pls?
longing for your reply.
Attachments:
test.vi ‏47 KB

Right off hand I would say the problem is that you are connecting through ODBC. Try the native SQL Server driver, your connect string should define the provider as "SQLOLEDB.1".
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

Authentication through external trust doesn't work with rodc

Similar Messages

Maybe you are looking for