Authentification errors and timeouts!

Anybody else suffering again on the forum today?
I'm getting authentification errors galore atm .....
Will be bailing out soon methinks ....

Hi Guys
Really sorry you are still having problems. I'll send you both a PM so I can gather some specific info about this error and when you are seeing it.
I haven't experienced it myself today so need to understand more about how and when it is happening so we can get it fixed.
Appreciate your patience with this - I know it's frustrating to get errors and timeouts when you are posting responses etc.
Thx
Kerry
Retired BTCare Community Manager - StephanieG and SeanD are your new Community Managers
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

OSB Customization files 2 set Retry Application Errors and Timeout props

I know it's possible to set Endpoint URI, Retry Count and Retry Iteration Interval properties using customization files, but what about other properties? I am particularly interested in setting Retry Application Errors and Timeout for a HTTP business services. If it's not possible to do with customization files is there another way of setting them without having to go though each service in the console?
Edited by: user1019490 on Sep 23, 2010 2:45 AM

Yes, I guess this can be done as there is provision in ALSBCustomizationFile.xml. Below is the snippet from ALSBCustomizationFile.xml
<cus:envValueAssignments>
<xt:envValueType>Service URI Table</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value>
<tableElement xmlns="http://www.bea.com/wli/sb/transports">
<URI>http://www.test.com/testService.asmx</URI>
<weight>0</weight>
</tableElement>
</xt:value>
</cus:envValueAssignments>
<cus:envValueAssignments>
<xt:envValueType>Service Retry Count</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>
</cus:envValueAssignments>
<cus:envValueAssignments>
<xt:envValueType>Service Retry Iteration Interval</xt:envValueType>
<xt:location xsi:nil="true"/>
<xt:owner>
<xt:type>BusinessService</xt:type>
<xt:path>TestProject/BusinessService/TestBS</xt:path>
</xt:owner>
<xt:value xsi:type="xs:string" xmlns:xs="http://www.w3.org/2001/XMLSchema">0</xt:value>
</cus:envValueAssignments>
Regards,
Karthik

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).

Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.

Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]

Powerpivot Report 2010 - OLE DB or ODBC error: Query timeout expired; HYT00

0
I have report already developed by someone in powerpivot 2010 and deployed to sharepoint in powerpivot gallery library. The data source for this report is SQL Server 2008 r2. I have set the refresh options in sharepoint to run after business hours during
week end. When I check the refresh history it shows this error message "OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the
transaction failed..
I have tried to run the "Also refresh as soon as possible " just to check but same error message is shown.
This is the detailed error message details:
03/02/2014 21:06:55 03/02/2014 22:08:15 01:01:20 Failed
OLE DB or ODBC error: Query timeout expired; HYT00. An error occurred while processing the 'xxx' table. The current operation was cancelled because another operation in the transaction failed
Could anyone guide me on this issue? Truly appreciate your help in advance.

Hi asritha,
I would suggest you take a look at the following articles regarding how to configure PowerPivot data refresh in SharePoint Server:
Configure and Use Stored Credentials for PowerPivot Data Refresh:
http://technet.microsoft.com/en-us/library/ee210671(v=sql.105).aspx
Configure and Use the PowerPivot Unattended Data Refresh Account:
http://technet.microsoft.com/en-us/library/ff773327(v=sql.105).aspx
Note: Please ensure that the account have sufficient permission access to your data source.
In addition, please elaborate your PowerPivot data soure with more detail. If you are using SSAS cube, please try to increase "ExternalConnectionTimeout" property default value to see if this helps. Here is the similar thread for your reference,
please see:
http://social.technet.microsoft.com/Forums/en-US/35b26c06-9e6d-41e5-ae44-bfb1233510ac/ssas2008-ole-db-error-ole-db-or-odbc-error-query-timeout-expired-hyt00?forum=sqldatamining
Regards,
Elvis Long
TechNet Community Support

RSTPTEST , RFC ping failed RFC error text: timeout during allocate / CPIC-C

Hi all,
I was transporting the request in my landscape last week and all of sudden transports in acceptance system is not working and I am getting a error message as
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< [gwr3cpic.c 6135]
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 [gwr3cpic.c 6148]
, This is the 3 system landscape, common transport directory in development system.
Actions taken:
Restarted the systems (PRD queue is working but not acceptance queue)
DIR_TRANS and Permission were given already and able to ping from all the sytem
Host and service entry were maintained already.
RFC connections were woring fine without errors
I have seen many threads but none of the thread is solved my problem.
Please suggest
Vijay

Hello,
Thanks fpr your reply and I tried the steps which you said and the result is same error for both the options.
1 & 2 Answers :
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
SMGW logs are as follows:
Tue Jun 16 12:04:28 2009
ERROR => GwISearchPartner: timeout, partner LU: >hostname<, TP: >M:\usr\sap\SID\DVEBMGS00\exe\tp.EXE< http://gwr3cpic.c 6135
ERROR => GwISearchPartner: HOST: hostname conv ID: 50323660 http://gwr3cpic.c 6148
I think this is not able to contact the domain controller.
But I can see the checks are fine from checking the transport directory.
Vijay

RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!

Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.

Server 2012 errors for timeout -- LDAP error number: 55 -- LDAP error string: Timeout Failed to get server error string from LDAP connection

Hello, currently getting below error msg's utilizing software thru which LDAP is queried for discovering AD objects/path and resource enumeration and tracking.
Have ensured firewalls and port (389 ) relational to LDAP are not closed, thus causing hanging.
I see there was a write up on Svr 2003 ( https://support.microsoft.com/en-us/kb/315071 ) not sure if this is applicable, of if the "Ntdsutil.exe" arcitecture has changed much from Svr 03. Please advise.
-----------error msg ----------------
-- LDAP error number: 55
-- LDAP error string: Timeout Failed to get server error string from LDAP connection

The link you shared is still applicable. You can adjust your LDAP policy depending on your software requirements.
I would also recommend that you in touch with your software vendor to get more details about the software requirements.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

EVENT ID 30011 Error: 85 (Timeout) ReplicationType:LocalRegistrarReplication Source: LS User Replicator

when we are trying to move Lync users between two pools in the same site we received error that the move operation has been failed because the user is not provisioned.
we have two lync 2013 servers (windows 2008 R2) and SQl 2012 SP2
In event viewer we have noticed the below replication error
Event ID 30011
"Encountered an unrecognized error while processing objects from a domain. This error caused User Replicator to abort synchronization of this domain. Synchronization will be retried for this domain.
If this domain is not enabled for Lync Server, then this error can be ignored.
Domain: **.*** (DN: DC=**,DC=**) Error: 85 (Timeout) ReplicationType:LocalRegistrarReplication
Cause: The cause for this error can vary. Please review the errors listed above.
Resolution:
Contact support services if the error is not descriptive enough to remedy the problem."
Best Regards, Fadi.F.Haddad

HI
I think you have several issues, First can you check weather you lync server is synced with Domain. this could be some stale entries of domain which may be deleted or created for testing purpose.
Can you run this command from Lync FE: Get-CSUserReplicatorConfiguration and see the domains are listed.
You can probably deleted if some unwatented.
If you want o add the domains which you cannot find in the list
Set-CsUserReplicatorConfiguration -Identity global –ADDomainNamingContextList @{add=”dc=Zubi, dc=local”}
Set-CsUserReplicatorConfiguration -Identity global –ADDomainNamingContextList @{remove=”dc=Zubi, dc=local”
you can also check basics weather you DNS is replicating between domain and all of you front end server.
Regards
Zahoor

CRC errors and input errors on Te 1/2 of Cisco WS-C3560X-48 switch

Hi All,
I am observing CRC errors and input errors on one of the Te1/2 interface of WS-C3560X-48 Cisco switch. I have not observed any CRC errors or input errors on the connected interface at other end. Can you please let us know whether the issue is with cable or SFP module.
Effected interface:
TenGigabitEthernet1/2 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet, address is f866.f243.e6b6 (bia f866.f243.e6b6)
Description: *** MAN-SW1B***
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 254/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is SFP-10GBase-SR
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 3w5d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 29000 bits/sec, 30 packets/sec
5 minute output rate 45000 bits/sec, 37 packets/sec
68905128 packets input, 8272036576 bytes, 0 no buffer
Received 68904979 broadcasts (68812046 multicasts)
0 runts, 0 giants, 0 throttles
146170 input errors, 130065 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 68812046 multicast, 0 pause input
0 input packets with dribble condition detected
83524620 packets output, 12642123488 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
Other end.
TenGigabitEthernet1/4 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet Port, address is 503d.e53b.9703 (bia 503d.e53 b.9703)
Description: *** DMZ-SW1B ***
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-SR
input flow-control is on, output flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters never
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 32000 bits/sec, 27 packets/sec
5 minute output rate 21000 bits/sec, 22 packets/sec
918379921 packets input, 312586470396 bytes, 0 no buffer
Received 881142868 broadcasts (875016400 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
463132111 packets output, 240865283601 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out

When there are more than two members in a cluster (stack), the Gigabit interface operates at half-duplex. Since collisions can result at half-duplex, some CRCs errors are normal.

When I sign in to hotmail, my emails appear then I have errors and the page goes blank. Any help ? I'm on OS X 10.5.8

when I sign in to hotmail, my emails appear then I have errors and the page goes blank. Any help ? I'm on OS X 10.5.8
Sorry should have said, when I log in my emails pop up momentarily. Then, it seems as if the pages aren't loading. A message comes up on the bottom left that the pages are loading, then errors occur and nothing happens.
Thanks

i tried to access kb.mozillazine.org and the following error message was returned:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
The following error was encountered:
* Read Timeout
The system returned:
[No Error]
A Timeout occurred while waiting to read data from the network. The network or server may be down or congested. Please retry your request.
Your cache administrator is root.
Generated Tue, 07 Jun 2011 10:04:45 GMT by sunrise-squid.mz.osuosl.org (squid/2.5.STABLE11)
I have tried to access your link, or just kb.mozillazine.org several times over the past hour without success...

Authentification error

Hi,
Suddenly, both my macs report an authentification error when joining any wifi network although no passwords have changed and the correct passwords have been entered. Any idea how to fix this? Thanks.

Thanks again iFelix but didn't work. I type correct passwords but I get an error message saying it's not the right password. The airport recog the networks (home, office, cybercafe...) but no way to join these networks!

Get_sqlagent_job_status long durtions and timeouts

Hi,
In Reporting Services, ReportSever database there is the Get_sqlagent_job_status procedure. This procedure is calling the undocumented system procedure xp_sqlagent_enum_jobs to
check the subscription jobs statuses. In most of the times the execution finishes in milliseconds. In rare cases however, the execution is taking much longer and when it reaches 30sec procedure is timing out with the following error:
Msg 22023, Sev 16: SQLServerAgent exceeded the allowed timeout for
creating the shared job list. The Jobs cannot be enumerated.
During long executions the wait type is MSQL_XP. Regarding msdn it:
Occurs when a task is waiting for an extended stored procedure to end. SQL Server uses this wait state to detect potential MARS application deadlocks. The wait stops when the extended stored procedure call ends.
My question is why sometimes the xp_sqlagent_enum_jobs procedure is running longer and timeout? I couldn’t trace on which resources or processes it is waiting. When searching the
Microsoft sites, I only found info that this is undocumented procedure and should not be used. Why then then it is being used in the ReportServer database that is being setup during the Reporting Services installation.
What can be done to get rid of the timeout errors from Get_sqlagent_job_status procedure?
I hope anyone can help.
Regards,
Marek

Hi. We have the exact same problem. We have put in all the notes mentioned here and more.
We have looked at the variant and have restricted it as much as possible, but we create about 30000 carts a month and some of them are not complete for a long time so we can not restrict the days too much.
We try to run BBP_GET_STATUS_2 for 90 day timeframe, as this covers much of it, but it takes over 10 hours to run.
We would then want to run more than 90 days once a week or something, but this takes 24 hours to run.
Does anyone have any more ideas how we can improve this?
I am thinking about stopping running the program and use a user exit in MIRO and MIGO to RFC into SRM and run the program for just the 1 applicable cart at a time, but this seems a bit drastic.
I have asked SAP all this but they told us the same as above, try the notes, restrict the variant.
Regards,
Dave.

This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

HI,
I got the error message in the crawl log as below after performing the Full Crawl
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
So please suggest me to overcome this error without increasing the timeout.Thanks in advance
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

CRC Error and input Error how can fix these

FastEthernet0/13 is up, line protocol is up
Hardware is Fast Ethernet, address is 0004.4d27.66cd (bia 0004.4d27.66cd)
Description: EDL-P-Box-NO-4
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
     reliability 250/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), Auto Speed (100), 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 18:52:43, output 00:00:01, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 12000 bits/sec, 6 packets/sec
5 minute output rate 24000 bits/sec, 6 packets/sec
     14488019 packets input, 2783320210 bytes
     Received 345346 broadcasts, 0 runts, 0 giants, 0 throttles
     261028 input errors, 259429 CRC, 1599 frame, 0 overrun, 0 ignored
     0 watchdog, 84207 multicast
     0 input packets with dribble condition detected
     19658279 packets output, 3529106068 bytes, 0 underruns
     0 output errors, 0 collisions, 1 interface resets
     0 babbles, 0 late collision, 0 deferred
     0 lost carrier, 0 no carrier
     0 output buffer failures, 0 output buffers swapped out
PAD-8-1-10.179#cle
v

Hi,
Check out the below explanation for CRC error and farme error and few useful links to trouble shoot these type of problems
The CRC error rate is 1.75915% (greater than 1 in a million packets),
and the collision rate is less than 0.1%.
This can indicate excessive noise or transmission problems on the LAN or the LAN
bus itself. A high number of CRCs is usually the result of collisions or a station
transmitting bad data.
TRY THIS: Check cables to determine whether any are damaged. If 100BaseTX is being
used, ensure Category 5 cabling is being used and not another type, such as Category
3.
There have been 1599 'frame errors' reported.
This indicates the number of packets received incorrectly, having a CRC error
and a non-integer number of octets. On a LAN, this is usually the result of collisions
or a malfunctioning Ethernet device.
TRY THIS: Monitor the level of frame errors over time. If they are increasing,
try swapping interfaces and or ports to identify the problem.
http://www.cisco.com/en/US/customer/products/hw/modules/ps2033/products_tech_note09186a008009446d.shtml
http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
http://www.cisco.com/en/US/docs/internetworking/troubleshooting/guide/tr1904.html
Hope that helps out your query !!
Regards
Ganesh.H

Output errors and interface resets.

hi Netpros,
Any idea as to what could be causing output errors and interfece resets on the radio interfaces .. The output interpreter from Cisco does not show any information about the radio interfaces
please see this output after clearing the counters
Dot11Radio0 is up, line protocol is up
Hardware is 802.11G Radio, address is 0015.c7a8.3d90 (bia 0015.c7a8.3d90)
MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:07, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/962/0 (size/max/drops/flushes); Total output drops: 181678
Queueing strategy: fifo
Output queue: 0/30 (size/max)
5 minute input rate 4000 bits/sec, 6 packets/sec
5 minute output rate 1000 bits/sec, 1 packets/sec
39213813 packets input, 3905641263 bytes, 0 no buffer
Received 53803 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
21236022 packets output, 3766719027 bytes, 0 underruns
11617 output errors, 0 collisions, 25 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out
Any input is much appreciated.

Let's take a look at what you're worried about: 11,617 output errors divided by 21,236,022 packets output = 0.05% loss. Not really much to worry about there.
As for the 25 interface resets, that's one reset for every 849,441 output packets. Again, nothing really to worry about, but one does wonder why those numbers are not zero.
So how about taking a closer look at the following line you reported:
Input queue: 0/75/962/0 (size/max/drops/flushes); Total output drops: 181678
Notice in particular the "Input queue drops = 962" and more importantly, the "Total output drops = 181,678". You can find detailed troubleshooting information about these problems at: http://www.cisco.com/warp/public/63/queue_drops.html to help you figure out what the actual problem is and whether or not it can be rectified by fine tuning your parameters.
FYI: Here is a standard definition of Output related errors: (taken from http://www-commeng.cso.uiuc.edu/uiucnet/reports/glossary.html )
Output Errors
- Output errors are the sum of all the output errors that occur on an interface.
Out Success With Retry Errors
- Out Success With Retry errors are output errors which indicate that a frame successfully transmitted after one or more collisions. Out Success With Retry Errors are the number of frames that experienced a a collision and retransmit before success. The total collisions divided by the number of Out Success With Retry errors will provide the average number of collisions per packet transmitted with collisions.
Out of Window Collisions Errors
- Out of Window Collisions are a type of output error. Out of window collision errors occur when a frame in the process of being transmitted collides with another frame. This error usually occurs either when some interface on the network fails to defer or the network has too many stations. (See Late Collisions.)
Output Discard Errors
- Output Discards are output errors that occur when the router has to throw a packet out instead of queuing it for transmission on the Ethernet. Output discard errors usually indicate that the network has more traffic than it can handle. They may also indicate a software discard such as no route to destination.
Output FIFO Overrun Errors
- FIFO Overruns are a type of output error. Output FIFO Overruns occur when the output queue in the adapter underflowed while putting a frame on the wire. This problem occurs when the interface is not receiving bits of the frame fast enough.
Walt

Authentification errors and timeouts!

Similar Messages

Maybe you are looking for