Authirization in HR Master

I Need Help on HR Authorization.
We have defined multiple Employee Subgroups. I want to block all actions for one of the Employee Subgroup. How can I do it.
I tried as follows.
Object : P_ORGIN
Object Class: HR
Authorization Level: *
Infotype: *
Personnel Area: BCH1
Employee Group: *
Employee Subgroup: BA, BB, BM (BN to be blocked)
Subtype: *
Organizational Key : *
Despite above, It is allowing the user to see the details of employee with employee subgroup 'BN'...
Pl help..
Thanks in advance
Regards-vishad

Hi,
Kindly check the "Personnel Area" field of the Infotype 0001 for assigning plant.
best regards,
Thangesh

Similar Messages

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

Can not refresh page after save properly(When not saving master record)

I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
In some use case I have Address as master table and Person as detail table
For some business reason I need to don't save same addresses
eg:
If +1 Test St+ is in database already and new user coming and adding this address with new person
I need to use the row in database not creating a new address
I do saving in doDML method of Address with some hashing algorithm and it is fine
My problem is that I can not refresh page after save properly
User coming to page think Adding a new address and a new person but in fact no new
address added because of business I describe above
Any ideas how I can implement this?
Appreciate that
Regards
Mohsen

Hi,
from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
Frank

Can not refresh snapshot changes after importing data of master site

Hello !
I have two database computer,one as master site,one as snapshot site.Because the error of the hard disk of master computer,I use the exporting data file to recover my database.after importing ,I found I can't refresh the refreshgroup on snapshot,who can tell me why?
thinks in advance!
(exp system/manager full=y inctype=complete file='/home/save/backdata/xhsdcomp.dat')
(imp system/manager inctype=system full=Y file='/home/save/backdata/xhsdcomp.dat'
imp system/manager inctype=restore full=Y file='/home/save/backdata/xhsdcomp.dat')
null

You haven't listed the errors that you're receiving when attempting to refresh your refresh group, but if your snapshots are attempting to fast refresh, I suspect it's because the creation timestamp of the snapshot log on the master site is newer than the creation timestamp of the snapshot. In this case you will need to do a complete refresh of the snapshot (or drop and recreate the snapshot) before you will be able to fash refresh it again.
If this is not the case, please post the errors you are receiving when you attempt to refresh the refresh group.
HTH,
-- Anita
Oracle Support Services
null

Can not find master data in the cube

ItemNo is an navigation attribute of 0Material. We are using 0material in a cube. When I display the cube data include ItemNo, I don't find the data I am looking for. For example:
In 0Material:
0Material      ItemNo    Description
AAA                001           Test
BBB                002           Test
In the cube I expect to see:
0Material             ItemNo            On Hand Qty
AAA                      001                      1000
BBB                      002                       2000
Instead I saw:
0Material             ItemNo            On Hand Qty
AAA                                                1000
BBB                                                2000
0Material got refreshed after cube data got loaded. Is that why I don't find the refreshed Master data?
Thank you!

Hi,
When you laod the cube, the Values for Master are automatically get created in the master data (If they are not present earlier and with "Data Update Type in the Data Tragets" setting in InfoPackage).
Now when you are loading your cube with 0Material and Item Number, the values for Item Number seems blank. Thats the reason why you are not able to see the Item Number in Cube though it is present in Master. Because now these are two different keys, one with Item Number value and other without Item Number value.
Regards,
Yogesh.

Unable to capture field values in Master agreement Line Items

I am trying to get the field values from master agreement line items page. I have written the following code to get the line item details which is working fine to capture part number and quantity->
agreementBean = doc.getRootParentIBean();
lineItemCollection = agreementBean.getLineItems();
collectionsize = lineItemCollection.size();
for(i=0;i<collectionsize;i++){
     collectionbean = lineItemCollection.get(i);
     partNum = ""+collectionbean.getPartNumber() ;
     Quantity = ""+collectionbean.getQuantity();
     throw doc.createApplicationException(null,partNum + " , " + Quantity );
Now, my problem is that I am unable to capture the following field item values in the master agreement > line items page.
1. Price Unit
2. Unit Price
3. Product Category
4. Plant
Please help me to find the values.
Thankx in Advance.
Su
Edited by: subrataindra on Aug 10, 2010 11:11 AM

This will return the name of the plant.
.getExtensionField("PLANT").get().getDisplayName(session);
Check if this returns the product category
collectionbean.getExtensionField("ITEM_CAT").get().getDisplayName();
This will Return the Price
collectionbean.getExtensionField("PRICE").get().getPrice();
(return type :BigDecimal)
This will return the currency
collectionbean.getExtensionField("PRICE").get().getCurrency;
(Return type:String)
Similarly to retrieve other fields for which there are no standard functions, use .getExtensionField("Field ID")
Hope this helps
Regards,
Immanuel

Failure to install Creative Cloud Master for Windows

Hi all,
I am using an Enterprise Creative Cloud and have packaged the Adobe CC Master for Windows.
I have followed the rules of installation by installing Acrobat XI first.
Upon installation of Acrobat, I proceeded to install Creative Cloud by going to the Build folder and install the Setup.exe by running as an Administrator. I have also disabled my anti-virus scanner as well. It starts to scan my harddisk and there is a progress bar that displays. Mid-way down the installation process, it just stops installing and it immediately uninstalls by displaying the progress-bar back to the start.
Why is this so? I understandthat by having an Entreprise account does not need you to go by the normal way of going to the Creative Cloud Manager to download and have a password to type in right?
Can anyone help me?
Thanks!

Hi Romit Sinha,
Thanks for your prompt response.
For some strange reasons, after I restarted my computer, disabled my anti-virus again and run the setup.exe using the administrator rights, it manages to install the CC apps within the build folder.
However, may I know how do I install both Edge Reflow and Edge Code? As I am using an enterprise edition, I don't see these 2 products within the Build or Exclusions folder. Must I log in to the Creative Cloud (using my Adobe ID and password) to download them?
If I log-in using my adobe account, will Adobe start charging me which will be ludicrous as I already have an enterprise edition.
What gives?
Thanks and Regards

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Installation problem on CS4 Master Collection

WHen I attempt to install CS4 master collection on Vista Ultimate X64
While the installer is "checking system profile" the next window shows "Loading Setup"
I then get a System Check error page. The window label is "Adobe Creative Suite 4 Master Collection Installer - Alerts"
In the box it says, System Check.
Critical Errors were found in setup for Adobe Creative Suite 4 Master Collection.
Session has dependencies that cannot be satisfied.
please see the Setup log file for details. click Quit to exit Setup."
Then there is a Quit button, that is the only option.
Any ideas which services need to be enabled to be able to install creative suite?

I do have service pack 1 for vista ultimate x64.
Here is the end of the log....
[ 436] Thu Oct 30 19:12:48 2008 DEBUG
PayloadPolicyInit: BEGIN Updating installstate for payloads
PayloadPolicyInit: END Updating installstate for payloads
PayloadPolicyInit: BEGIN Creating policyNodes
PayloadPolicyNode._SetPayloadAction: none for {092DF7B0-6E10-4718-9763-9704CC4E6EF9} Adobe Anchor Service CS4
[ 436] Thu Oct 30 19:12:48 2008 ERROR
Unable to load fileOptions from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Options\Op tions.js
Log of: object
name {string}: TypeError
message {string}: 'collectionID' is null or not an object
number {number}: -2146823281
description {string}: 'collectionID' is null or not an object
[ 436] Thu Oct 30 19:12:48 2008 DEBUG
updating path to Win32
WizardControl: loading page "Progress" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Progress\P rogress.js
updating path to Win32
WizardControl: loading page "Register" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Register\R egister.js
updating path to Win32
WizardControl: loading page "Finish" from C:\Program Files (x86)\Common Files\Adobe\Installers\49b2c0059f3cb852831867eec06474a\resources\pages\Install\Finish\Fin ish.js
HTML data complete: Welcome
HTML data complete: Eula
HTML data complete: Progress
HTML data complete: Register
HTML data complete: Finish
[ 436] Thu Oct 30 19:12:48 2008 ERROR
Critical errors were found in setup for Adobe Creative Suite 4 Master Collection:
- Session has dependencies that cannot be satisfied.
Please see the Setup log file for details. Click Quit to exit Setup.
[ 436] Thu Oct 30 19:17:23 2008 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
Doesn't really make sense to me....

Questions on Master-Detail HTMLDB HOW-TO

Hi all
I have created a 3 page application based on the master detail how-to given at http://www.oracle.com/technology/products/database/htmldb/howtos/index.html
Instead of DEPT and EMP tables I have PERSON and PERSON_ADDR tables. The PK of PERSON is the person_id and the PK of PERSON_ADDR is the person_id and addr_start_dt. Person_id column in PERSON_ADDR is obviously the FK to the master table PERSON(person_id).
At first I had problems trying to create the pages themselves because the wizard always hides the person_id column on all the forms(and I don't want that,even though it is a sequence number I still want people to see it) , it being the PK, then somehow I managed it to display the person_id by replacing the EDIT link with the person_id itself. Now if a person already has an address and I click on EDIT then it copies the person_id values and others to the next page and all looks good but when I try to create a new address it does it ?? (It should take across the person_id as well)
My PERSON report is on page 1, when I click edit against a person it takes me to page 2 where I can see+change all the person details plus I can see the person_addr details. When I click edit against a person address it takes me to page 3 and I can edit all the address details nicely copied to the new page but when I click CREATE on the page 2, then all the fields appear as NULL on page 3( all the fields but the person_id should be null here). How can I fix this ?
Also, for my person address I would like to validate the address dates , there should be no overlapping start and end dates for a person's address. How to do this ? I think I will need to create a function to which I pass the person id and the new start and end dates and this function returns error message,if any, or null. I had a play around with validation and I think I need to use "function returning error text", what should I put in the "validate expression 1" box then...just something like
begin
my_function(param_1,param_2)
end;
If yes, then what variables would store the new start date and new end date of an address.
Lastly, for every table do I have to user a sequence number or a trigger to define a primary key, what if the primary key is just a character code and I want the users to add it ?
Thanks a lot in advance !!

thanks Marc.
Yes you are right, I used the 1.5 viewlet. I will try the master-detail wizard now.
With the primary key problems, for things to work nicely in HTMLDB, do you suggest each and every tables should have a sequence number generated primary key ? We have some tables for various statuses like ACTIVE,CLOSED where these codes themselves are the primary keys, so you suggest making these codes unique keys but still have a sequence number PK ? Also when I want the users to enter the primary key themselves I will let them enter new ones but not update existing ones, so data entegrity is maintained.
I was able to work out how to create validations using "functions returning error text" but my problem is I need to be able to compare what the user has just updated/entered with the data that already exists in the table. I have a table called person_Address having columns like person_id, start_dt,end_dt and various other fields. The primary key is person_id and start_dt and I need to put a validation which avoids any overlapping addresses. Overlap as in there can be only 1 active address for a given start and end date range. Does HTMLDB has something like :new.start_dt the way we can write database triggers ? Please suggest a way to do this.
Lastly, how does HTMLDB handles error messages raised by table triggers. Can they be shown along with the item on the page as we can with the other HTMLDB validations ? I have many tables with all sorts of triggers and if any validation fails I generally do...raise_application_error(-20001,get_my_message(234));
get_my_message function returns the message text for message number 234 . Will this message be displayed somewhere or not ? Do I have to duplicate my validations , once in the triggers and then in HTMLDB as well ?

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

Creating Master to show only rows for which valid entries exist in Detai

I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
Thank you!

I have created a Master-Detail Form in my Apex application based off of views to tables in a private remote Database.
In the Master-Detail Creation Wizard, at the "Link Master and Detail" page, I specified that the defined Primary Key in the Master Column should be equal to the corresponding Foreign Key in the Detail Column.
My goal is to have my Master Form only display rows for which a valid corresponding entry exists in the Detail Form. Yet, the above setup returns all of the rows from the Master Table, even where the corresponding Detail entry is blank.
Can you provide some light on what I'm doing wrong, and how I can accomplish what I want to do?
Thank you!

Error while creating money market transaction - payment details not retrieving from BP master data.

Hello friends
I have error while creating financial transaction. Payment details are not retrieving from BP master data to creating financial transaction screen.
No payment details entered for transaction
Message no. FTR0030
Please advise to set off this.
Thanks & Regards
Swami

Dear Swami,
Please select one payment details in Business partner and use assigned tab from top selection parameter from standing instruction to assigned bank details to product type.
It will open other window like above example for each product of treasury, then assign bank details to product. Once assigned and save.
System will pick payment details in deal automatically based on business partner.
Hope this solve your issue.
Regards,
Jain
Message was edited by: Jain Varghese

Error while creating a column in master

Hi all,
I am using the sap business one 8.8 version.
I am getting an error while creating a user defined column for a master table.
The error code is -104.
The method I had used for creating a master table is as follows.
*#region Create Table*
        public static bool CreateTable(string TableName, string TableDescription, SAPbobsCOM.BoUTBTableType TableType, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
            SAPbobsCOM.UserTablesMD oUserTableMD;
            int intRecCode;
            bool boolResult = false;
            oUserTableMD = (SAPbobsCOM.UserTablesMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables);
            try
                if (!oUserTableMD.GetByKey(TableName))
                    oUserTableMD.TableName = TableName;
                    oUserTableMD.TableDescription = TableDescription;
                    oUserTableMD.TableType = TableType;
                    intRecCode = oUserTableMD.Add();
                    if (intRecCode == 0)
                        boolResult = true;
            catch (Exception e)
                oApplication.MessageBox(e.Message, 1, "Ok", "", "");
            finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserTableMD);
                GC.Collect();
            return boolResult;
        #endregion
==================================
The following is the code for creating a column in the above master
private static void AddField(string TableName, string ColumnName, string ColDescription, SAPbobsCOM.BoFieldTypes FieldType, int Size, SAPbobsCOM.BoFldSubTypes SubType, string ValidValues, string ValidDescription, string
SetValidValues, SAPbouiCOM.Application oApplication, SAPbobsCOM.Company oCompany)
int intLoop;
            string[] strValue, strDesc;
            SAPbobsCOM.UserFieldsMD oUserFieldsMD;
            SAPbobsCOM.Recordset oRecordSet;
            oUserFieldsMD = (SAPbobsCOM.UserFieldsMD)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields);
            oRecordSet = (SAPbobsCOM.Recordset)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
            try
                oRecordSet.DoQuery("SELECT COUNT(*) FROM CUFD WHERE TableID = '" + TableName + "' AND AliasID = '" + ColumnName + "'");
                if (Convert.ToInt16(oRecordSet.Fields.Item(0).Value) == 0)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                    oRecordSet = null;
                    strValue = ValidValues.Split(Convert.ToChar(","));
                    strDesc = ValidDescription.Split(Convert.ToChar(","));
                    if (strValue.GetLength(0) != strDesc.GetLength(0))
                        throw new Exception("Invalid Values");
                    oUserFieldsMD.TableName = TableName;
                    oUserFieldsMD.Name = ColumnName;
                    oUserFieldsMD.Description = ColDescription;
                    oUserFieldsMD.Type = FieldType;
                    if (FieldType != SAPbobsCOM.BoFieldTypes.db_Numeric)
                        oUserFieldsMD.Size = Size;
                    else
                        oUserFieldsMD.EditSize = Size;
                    oUserFieldsMD.SubType = SubType;
                    oUserFieldsMD.DefaultValue = SetValidValues;
                    for (intLoop = 0; intLoop <= strValue.GetLength(0) - 1; intLoop++)
                        oUserFieldsMD.ValidValues.Value = strValue[intLoop];
                        oUserFieldsMD.ValidValues.Description = strDesc[intLoop];
                        oUserFieldsMD.ValidValues.Add();
                    if (oUserFieldsMD.Add() != 0)
                        UpdateLastErrorDetails(-104, oCompany);
            catch (Exception e)
            { oApplication.MessageBox(e.Message, 1, "Ok", "", ""); }
            finally
                if (oRecordSet != null)
                    System.Runtime.InteropServices.Marshal.ReleaseComObject(oRecordSet);
                    oRecordSet = null;
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserFieldsMD);
                GC.Collect();

Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined .

Authirization in HR Master

Similar Messages

Maybe you are looking for