%AUTHMGR-4-UNAUTH_MOVE messages in WLC 5760
Hi,
We're getting this messages on a WLC 5760:
Mar 7 14:24:32.136: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1f2f) from Ca7 to Ca44
Mar 7 14:24:53.148: %AUTHMGR-4-UNAUTH_MOVE: (slow) MAC address (0011.21c2.115f) from Ca15 to Ca22
Mar 7 14:47:40.142: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1fd9) from Ca9 to Ca44
Mar 7 14:50:40.290: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1f6e) from Ca43 to Ca31
Mar 7 14:50:46.398: %AUTHMGR-4-UNAUTH_MOVE: (slow) MAC address (0011.21c2.1f6e) from Ca31 to Ca43
Mar 7 14:51:02.109: %AUTHMGR-4-UNAUTH_MOVE: (fast) MAC address (0011.21c2.1f2f) from Ca44 to Ca43
Mar 7 14:54:34.961: %AUTHMGR-4-UNAUTH_MOVE: (slow) MAC address (0011.21c2.1f6e) from Ca22 to Ca41
We didn't found any information regarding the message in the 3800/5700 WLC documentation but in other products we've found this:.
# Error Message AUTHMGR-4-UNAUTH_MOVE, MSGDEF_LIMIT_MEDIUM: [chars] MAC address
([enet]) from [chars] to [chars]
Explanation There was an authenticated move on the old IDB. The first [chars] is slow or fast, the second [chars] is the source interface name, the third [chars] is the destination interface name, and [enet] is the MAC address.
Recommended Action No action is required.
Does anyone knows the meaning of these messages on the 5760 WLC? These clients are mounted in warehouse stackers, moving in the wharehouse with speeds between 10 and 40 Km/hour and sometimes we have complains of roaming issues. Are this messages related with roaming issues?
Kind regards,
Vasco
Hi Vasco,
These messages are related to roaming and it's an expected behaviour.
%AUTHMGR-4-UNAUTH_MOVE is expected to occur when a mac address is moved to another interface by reconnecting network devices.
Thanks,
Ashish
Similar Messages
-
I am using the WLC 5760
My SSID use WPA2 PSK and i don't use ISE or Radius or AAA to authentication
Some client can connect to the AP,but can not ping the gateway
When i show logging from WLC,it will see the log like
%AUTHMGR-5-FAIL: Authorization failed or unapplied for client
How do i resolve this problem
Thank'sHi,
Have you made sure that the appropriate vlans are permitted on the trunk between the WLC and the switch?
Normally the gateway is an SVI on a core switch, so if the vlan is not permitted, you wouldn't be able to ping the gateway.
HTH
Mike -
I cant not control wlc 5760 (every thing CLI & GUI)
After wlc 5760 reload (because of some problems.)
I don't know this message. and I can not control wlc 5760 in CLI console.
Please help me.
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
.... again & again
I try to booting. but I can't.
I want to know : method 5760 Factory default or normal booting mode.
+ log
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found,FIPS Mode Not Enabled
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CT5760 (i686) processor with 10485760K bytes of physical memory.
Processor board ID FOC1746V2AK
2048K bytes of non-volatile configuration memory.
10485760K bytes of physical memory.
255000K bytes of Crash Files at crashinfo:.
3612840K bytes of Flash at flash:.
0K bytes of Dummy USB Flash at usbflash0:.
0K bytes of at webui:.
Base Ethernet MAC Address : 1c:1d:86:24:10:80
Motherboard Assembly Number : 73-14448-04
Motherboard Serial Number : FOC174577NZ
Model Revision Number : A0
Model Number : AIR-CT5760
System Serial Number : FOC1746V2AK
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-.cfg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-.cfg (Timed out)
%Error opening tftp://255.255.255.255/network-confg (Timed out)
%Error opening tftp://255.255.255.255/cisconet.cfg (Timed out)
%Error opening tftp://255.255.255.255/nx-5760-wlc01-confg (Timed out)I have same problem when i upgraded Cisco 3850 Switch to latest IOS. I have lost access to the console.
can someone please help.
Thanks -
Unknown error message in WLC Config Analyzer
Hello,
does anybody know what means the following error message from WLC Config Analyzer?
30026,General: Network state not matching: WLC3-Ortona,on 11g. My state :True, its state :True. This may introduce join issues on APs
My WLC IOS version is 7.0.98.0
Thanks
JohnnyHello,
does anybody know what means the following error message from WLC Config Analyzer?
30026,General: Network state not matching: WLC3-Ortona,on 11g. My state :True, its state :True. This may introduce join issues on APs
My WLC IOS version is 7.0.98.0
Thanks
Johnny -
WLC 5760 - MAC Filtering wireless clients
Hi,
Does anyone ever deployed mac-filtering authentication to wireless clients in the WLC 5760?
I've configured a WLAN for Mac-filtering authentication only (named it as "macauth"):
wlan RNVDOS 4 RNVDOS
aaa-override
no broadcast-ssid
client vlan RNVDOS
mac-filtering macauth
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
session-timeout 1800
no shutdown
Then, below Configuration->Security->MAC Filtering I've added several MAC addresses i.e. :
MAC Address: 88532e9ef70a Attribute List: macauth
Which turned out to be display in the CLI as:
username 88532e9ef70a mac aaa attribute list macauth
The problem is that whenever I try to associate the wireless client 88532e9ef70a, the client passes to the exclusion list.:
Sep 16 10:54:55.603: 8853.2E9E.F70A Adding mobile on LWAPP AP 0C68.03EA.4070 (1) 1 wcm: E9E.F70A (.t^GwtSessionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A Creating WL station entry for client - rc 0 1 wcm:
Sep 16 10:54:55.603: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: (.t^GwtSessionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: ssionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw00dd) was added to ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.603: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: ^G$h\225v^K
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:55.603: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:55.603: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:55.603: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:55.603: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Idle to AAA Pending
Sep 16 10:54:55.603: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:55.604: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:55.604: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Idle to AAA Pending
Sep 16 10:54:55.604: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:55.604: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 18) in 10 seconds
Sep 16 10:54:55.813: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:55.813: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:55.813: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.813: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:55.813: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:55.813: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:55.813: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:55.813: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:55.813: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:55.814: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:55.814: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:55.814: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:55.814: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 18) in 10 seconds
Sep 16 10:54:56.520: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:56.520: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:56.520: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.520: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:56.520: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:56.520: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:56.520: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:56.520: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.520: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:56.521: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:56.521: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.521: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.521: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 18) in 10 seconds
Sep 16 10:54:56.729: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n 10 seconds
Sep 16 10:54:56.729: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:56.729: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.729: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: from AAA Pending to Authenticated
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:56.729: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:56.729: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:56.729: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:56.729: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.729: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:56.730: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:56.730: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.730: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.730: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 18) in 10 seconds
Sep 16 10:54:56.937: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:56.937: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:56.937: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.937: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:56.937: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:56.937: 8853.2E9E.F70A STA - rates (8): 1 wcm: 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
Sep 16 10:54:56.937: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
Sep 16 10:54:56.937: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.937: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:56.937: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:56.937: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:56.937: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Authenticated
Sep 16 10:54:56.937: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 18) in 10 seconds
Sep 16 10:54:57.143: 8853.2E9E.F70A Association received from mobile on AP 0C68.03EA.4070 1 wcm: n.t^Gwseconds
Sep 16 10:54:57.143: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
Sep 16 10:54:57.143: 8853.2E9E.F70A apChanged 1 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw 0C68.03EA.4070 f^G$h\225v^K
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm: ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm: 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
Sep 16 10:54:57.143: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying site-specific IPv6 override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying local bridging Interface Policy for station 8853.2E9E.F70A - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
Sep 16 10:54:57.143: 8853.2E9E.F70A Applying site-specific override for station 8853.2E9E.F70A - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
Sep 16 10:54:57.143: 8853.2E9E.F70A STA - rates (8): 1 wcm: 130 132 139 150 12 18 24 36 0 0 0 0 0 0 0 0
Sep 16 10:54:57.143: 8853.2E9E.F70A STA - rates (12): 1 wcm: 130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
Sep 16 10:54:57.144: 8853.2E9E.F70A 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [ 0C68.03EA.4070 ] 1 wcm: site 'renova', interface 'RNVDOS'
Sep 16 10:54:57.144: 8853.2E9E.F70A Updated location for station old AP 0C68.03EA.4070 -1, new AP 0C68.03EA.4070 -0 1 wcm: va', interface 'RNVDOS'
Sep 16 10:54:57.144: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: P 0C68.03EA.4070 -0
Sep 16 10:54:57.144: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:57.144: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:57.144: 8853.2E9E.F70A
client incoming attribute size are 0 1 wcm: (callerId: 20) in 10 seconds
Sep 16 10:54:57.145: 8853.2E9E.F70A Sending Assoc Response to station on BSSID 0C68.03EA.4070 (status 256) ApVapId 2 Slot 0 1 wcm: 68.03EA.4070 from Authenticated to AAA Pending
Sep 16 10:54:57.145: 8853.2E9E.F70A apfBlacklistMobileStationEntry2 (apf_ms.c: 1 wcm: 6129) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from AAA Pending to Exclusion-list (1)
Sep 16 10:54:57.145: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 44) in 10 seconds
Sep 16 10:54:57.145: 8853.2E9E.F70A client is added to the exclusion list, reason 1 1 wcm: d: 44) in 10 seconds
Sep 16 10:54:57.145: *apfReceiveTask: 1 wcm: %APF-4-ADD_TO_BLACKLIST_REASON: Client 8853.2E9E.F70A (AuditSessionID: 0afe01fb5236e37f000000de) was added to exclusion list. Reason: 802.11 association failure
Sep 16 10:54:57.836: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:54:58.533: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:54:59.231: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:54:59.922: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion 1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
Sep 16 10:55:06.972: 8853.2E9E.F70A apfMsExpireCallback (apf_ms.c: 1 wcm: 664) Expiring Mobile!
Sep 16 10:55:06.972: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm: (callerId: 46) in 60 seconds
Sep 16 10:55:06.972: 8853.2E9E.F70A apfMsExpireMobileStation (apf_ms.c: 1 wcm: 7067) Changing state for mobile 8853.2E9E.F70A on AP 0C68.03EA.4070 from Exclusion-list (1) to Exclusion-list (2)
Sep 16 10:55:06.972: 8853.2E9E.F70A 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [ 0C68.03EA.4070 ] 1 wcm: 3.2E9E.F70A on AP 0C68.03EA.4070 from Exclusion-list (1) to Exclusion-list (2)
Sep 16 10:55:06.972: 8853.2E9E.F70A 0.0.0.0 START (0) FastSSID for the client [ 0C68.03EA.4070 ] NOTENABLED 1 wcm: E9E.F70A on AP 0C68.03EA.4070 from Exclusion-list (1) to Exclusion-list (2)
Sep 16 10:55:06.972: 8853.2E9E.F70A Incrementing the Reassociation Count 1 for client (of interface RNVDOS) 1 wcm: D
Sep 16 10:55:06.972: 8853.2E9E.F70A Clearing Dhcp state for station --- 1 wcm: for client (of interface RNVDOS)
WLC1#
WLC1#
Kind Regards,
VascoHi Patrick,
Thank you for sharing your solution. It didn't solved entirely the problem but you pointed to the right direction!
They are caused, because the system searches for an aaa authorization list, which is not configured.
To resolve this configure the following
aaa authorization network mac-filter local
where mac-filter is the name you defined in the SSID.
I've used your sugestion to create an aaa local authorization list but instead of naming it with the SSID, I've used the name of the attribute list ( macauth ) and it solved the problem:
aaa authorization network macauth local
username 88532e9ef70a mac aaa attribute list macauth
wlan RNVDOS 4 RNVDOS
client vlan RNVDOS
mac-filtering macauth
WLC1#sh wireless client summ
Number of Local Clients : 1
MAC Address AP Name WLAN State Protocol
8853.2e9e.f70a APf872.ead7.31da 4 UP 11n(5)
Cheers,
Vasco -
Prime Infrastructure to manage WLC 5760 with IOS XE 03.03.03
Hi there Is IOS XE 03.03.03 on WLC 5760 to be managed via Prime infrastructure 2.1 or what version do I need? It seems to be not fully supported with 2.1... Thanks and best regards Dominic
Hi Dominic,
The release notes http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-1/release/notes/cpi_rn.html#pgfId-43893 show support of up to 03.03.02
I have got a 3850 WLC running on IOS XE 03.03.03 managed by Prime 2.1
The release might not be up to date. When the release notes for Prime 2.1 came out, the highest supported is 03.02.03 and a few days later got changed to 03.03.02.
Regards,
Jeen Chew -
ISE Compatibility with WLC 5760
The ISE compatibility Matrix (June 5, 2013), does have a row for WLC 5760 in its tables.
The WLC 5760 Release Notes says it is compatible with with ISE without specfying which features.
Why is the WLC 5760 missing from the ISE Compat Matrix and how can I get specific ISE feature support (ie CoA, DACL).
Thanks.Hello Marvin,
ISE 1.2 is in road map and it will be available till July 17, 2013 and that will support WLC 5760 and all the features which you are looking. -
Since i mentioned new to this tech,i deployed 2 WLC 5760 in network i connected one of Stack wise 480 cable in ring type.but my port is down state
when i give show switch stack-port summary both controllers are down state.
What could be the issue can any one suggest me.
Apart from the above issue i configured few of configuration please vlaidate it
wlan Guest-WbAuth 3 Guest-WbAuth
client vlan 100
mobility anchor 192.168.5.1
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
security web-auth
security web-auth authentication-list EXT_AUTH ---- need more information ?
security web-auth parameter-map webparalocal -need more information ?
no shutdown
2. Redudancy configuration
conf t
service internal
redundancy
main-cpu
standby console enable
end
session standby ios
please validate thisPlease follow the startup procedure:
http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller_Deployment_Guide/CT5760_Centralized_Configuration_eg.html#pgfId-1071864 -
Hi, I have WLC 5760 on mode Centralized because I don't have Switch 3850. I need to implement dot1x authentication using external AAA Server which is in my case is Active Directory on Windows 2012 Server. You can see my configuration in pictures i attached bellow. My problem is authentication is always failed.
Can you give me a hint ?
AAA Server
Authentication
LDAP
WLAN Security L2
WLAN Security L3
ERROR Log
ThanksComplete these steps in order to add the WLC as an AAA client in the ACS.
From the ACS GUI, choose the Network Configuration tab.
Under AAA Clients, click Add Entry.
In the Add AAA Client window, enter the WLC host name, the IP address of the WLC, and a shared secret key. See the example diagram under step 5.
From the Authenticate Using drop-down menu, choose RADIUS .
Click Submit + Restart in order to save the configuration. -
WLC 5760 - show client ccx roam-history
Hi,
We're running an WLC 5760 with the latests version (3.3.1). We have several wlans, with diferent authentication methods, and they are all working fine.
However we noticed that the roaming is working correctly but no information is displayed if the "show ccx roam-history".
WLC1#sh wireless client mac-address 8853.2e9e.f70a det | i CCX
Client CCX version : 4
WLC1#debug dot11 ccx-roam all
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Mobile 8853.2e9e.f70a associated
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending Neighbor List packet to Mobile 8853.2e9e.f70a
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending L2Roam Packet to mobile 8853.2e9e.f70a
Dec 12 17:11:40.963: 00000000: 1 wcm: 01 1a 33 81 88 53 2e 9e f7 0a c0 25 5c 68 50 50 ..3..S.....%\hPP
Dec 12 17:11:40.963: 00000010: 1 wcm: 28 11 c0 25 5c 68 50 50 01 00 02 01 06 ab 0d 0d (..%\hPP........
Dec 12 17:11:40.963: 00000020: 1 wcm: 03 b8 05 28 11 c0 25 5c ec 05 a0 0b 00 07 01 06 ...(..%\........
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000030: ab 0d 0d 03 b8 05 28 11 0c 68 03 ea 52 10 06 00 ......(..h..R...
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000040: 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 03 d6 e4 .........(..h...
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000050: 00 0b 00 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 ............(..h
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000060: 03 4d d0 60 01 00 07 01 06 ab 0d 0d 03 b8 05 28 .M.`...........(
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000070: 11 0c 68 03 ea 40 70 01 00 07 01 06 ab 0d 0d 03 ..h..@p.........
Dec 12 17:11:40.963: %IOSXE-7-PLATFORM: 1 process wcm: 00000080: b8 05 28 11 0c 68 03 ea 4b 10 01 00 07 01 06 ab ..(..h..K.......
Dec 12 17:11:40.963: 00000090: 1 wcm: 0d 0d 03 b8 05 28 11 c0 25 5c 68 50 5f 3c 01 04 .....(..%\hP_<..
Dec 12 17:11:40.964: 000000a0: 1 wcm: 01 06 ab 12 12 03 b8 05 28 11 c0 25 5c ec 05 af ........(..%\...
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000b0: 24 01 07 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 $..........(..h.
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000c0: ea 52 1f 24 01 07 01 06 ab 12 12 03 b8 05 28 11 .R.$..........(.
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000d0: 0c 68 03 ea 4b 1f 38 01 07 01 06 ab 12 12 03 b8 .h..K.8.........
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 000000e0: 05 28 11 0c 68 03 d6 e4 0f 38 01 07 01 06 ab 12 .(..h....8......
Dec 12 17:11:40.964: 000000f0: 1 wcm: 12 03 b8 05 28 11 c0 25 5c a3 f4 8f 30 01 07 01 ....(..%\...0...
WLC1#
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 00000100: 06 ab 12 12 03 b8 05 28 11 0c 68 03 ea 40 7f 30 .......([email protected]
Dec 12 17:11:40.964: %IOSXE-7-PLATFORM: 1 process wcm: 00000110: 01 07 01 06 ab 12 12 03 b8 05 ..........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Received Neighbor List Request from Mobile 8853.2e9e.f70a
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending Neighbor List packet to Mobile 8853.2e9e.f70a
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending L2Roam Packet to mobile 8853.2e9e.f70a
Dec 12 17:12:51.006: 00000000: 1 wcm: 01 1a 33 81 88 53 2e 9e f7 0a c0 25 5c 68 50 50 ..3..S.....%\hPP
Dec 12 17:12:51.006: 00000010: 1 wcm: 28 11 c0 25 5c 68 50 50 01 00 02 01 06 ab 0d 0d (..%\hPP........
Dec 12 17:12:51.006: 00000020: 1 wcm: 03 b8 05 28 11 c0 25 5c ec 05 a0 0b 00 07 01 06 ...(..%\........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000030: ab 0d 0d 03 b8 05 28 11 0c 68 03 ea 52 10 06 00 ......(..h..R...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000040: 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 03 d6 e4 .........(..h...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000050: 00 0b 00 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 ............(..h
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000060: 03 4d d0 60 01 00 07 01 06 ab 0d 0d 03 b8 05 28 .M.`...........(
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000070: 11 0c 68 03 ea 40 70 01 00 07 01 06 ab 0d 0d 03 ..h..@p.........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000080: b8 05 28 11 0c 68 03 ea 4b 10 01 00 07 01 06 ab ..(..h..K.......
Dec 12 17:12:51.006: 00000090: 1 wcm: 0d 0d 03 b8 05 28 11 c0 25 5c 68 50 5f 3c 01 04 .....(..%\hP_<..
Dec 12 17:12:51.006: 000000a0: 1 wcm: 01 06 ab 12 12 03 b8 05 28 11 c0 25 5c ec 05 af ........(..%\...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000b0: 24 01 07 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 $..........(..h.
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000c0: ea 52 1f 24 01 07 01 06 ab 12 12 03 b8 05 28 11 .R.$..........(.
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000d0: 0c 68 03 ea 4b 1f 38 01 07 01 06 ab 12 12 03 b8 .h..K.8.........
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 000000e0: 05 28 11 0c 68 03 d6 e4 0f 38 01 07 01 06 ab 12 .(..h....8......
Dec 12 17:12:51.006: 000000f0: 1 wcm: 12 03 b8 05 28 11 c0 25 5c a3 f4 8f 30 01 07 01 ....(..%\...0...
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000100: 06 ab 12 12 03 b8 05 28 11 0c 68 03 ea 40 7f 30 .......([email protected]
Dec 12 17:12:51.006: %IOSXE-7-PLATFORM: 1 process wcm: 00000110: 01 07 01 06 ab 12 12 03 b8 05 ..........
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Received Neighbor List Request from Mobile 8853.2e9e.f70a
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending Neighbor List packet to Mobile 8853.2e9e.f70a
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 8853.2e9e.f70a Sending L2Roam Packet to mobile 8853.2e9e.f70a
Dec 12 17:15:48.712: 00000000: 1 wcm: 01 07 33 81 88 53 2e 9e f7 0a c0 25 5c 68 81 20 ..3..S.....%\h..
Dec 12 17:15:48.712: 00000010: 1 wcm: 28 11 c0 25 5c 68 81 20 01 00 02 01 06 ab 0d 0d (..%\h..........
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 00000020: 03 b8 05 28 11 0c 68 03 ea 52 10 06 00 07 01 06 ...(..h..R......
Dec 12 17:15:48.712: %IOSXE-7-PLATFORM: 1 process wcm: 00000030: ab 0d 0d 03 b8 05 28 11 0c 68 03 ea 4a f0 0b 00 ......(..h..J...
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000040: 07 01 06 ab 0d 0d 03 b8 05 28 11 0c 68 03 d6 eb .........(..h...
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000050: 20 01 00 07 01 06 ab 0d 0d 03 b8 05 28 11 c0 25 ............(..
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000060: 5c ec 05 a0 0b 00 07 01 06 ab 0d 0d 03 b8 05 28 \..............(
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000070: 11 0c 68 03 d6 e4 00 0b 00 07 01 06 ab 0d 0d 03 ..h.............
Dec 12 17:15:48.713: 00000080: 1 wcm: b8 05 28 11 c0 25 5c 68 50 50 01 00 07 01 06 ab ..(..%\hPP......
Dec 12 17:15:48.713: 00000090: 1 wcm: 0d 0d 03 b8 05 28 11 c0 25 5c 68 81 2f 38 01 04 .....(..%\h./8..
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000a0: 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 ea 4a ff ........(..h..J.
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000b0: 2c 01 07 01 06 ab 12 12 03 b8 05 28 11 0c 68 03 ,..........(..h.
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000c0: ea 52 1f 24 01 07 01 06 ab 12 12 03 b8 05 28 11 .R.$..........(.
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000d0: 0c 68 03 d6 e4 0f 38 01 07 01 06 ab 12 12 03 b8 .h....8.........
Dec 12 17:15:48.713: 000000e0: 1 wcm: 05 28 11 c0 25 5c ec 05 af 24 01 07 01 06 ab 12 .(..%\...$......
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 000000f0: 12 03 b8 05 28 11 0c 68 03 d6 eb 2f 3c 01 07 01 ....(..h.../<...
Dec 12 17:15:48.713: %IOSXE-7-PLATFORM: 1 process wcm: 00000100: 06 ab 12 12 03 b8 05 .......
WLC1#show wireless client mac-address 8853.2e9e.f70a ccx roam-history
Shouldn't the output be the same as the AireOS command "show client roam-history client-mac"?
Kind regards,
Vasco CostaObtaining CCX Client Roaming Information (CLI)
Step 1
View the current RF parameters configured for client roaming for the 802.11a or 802.11b/g network by entering this command:show {802.11a | 802.11b} l2roam rf-param
Step 2
View the CCX Layer 2 client roaming statistics for a particular access point by entering this command:show {802.11a | 802.11b} l2roam statistics ap_mac
This command provides the following information:
The number of roam reason reports received
The number of neighbor list requests received
The number of neighbor list reports sent
The number of broadcast neighbor updates sent
Step 3
View the roaming history for a particular client by entering this command:show client roam-history client_mac
This command provides the following information:
The time when the report was received
The MAC address of the access point to which the client is currently associated
The MAC address of the access point to which the client was previously associated
The channel of the access point to which the client was previously associated
The SSID of the access point to which the client was previously associated
The time when the client disassociated from the previous access point
The reason for the client roam
Debugging CCX Client Roaming Issues (CLI)
If you experience any problems with CCX Layer 2 client roaming, enter this command:
debug l2roam [detail | error | packet | all] {enable | disable} -
I have a WLC 5760 and i did below configuration for WLAN:
wlan 3 85 GUESTS
client vlan 85
no security wpa
no security wpa akm dot1x
no security wpa wpa2
no security wpa wpa2 ciphers aes
session-timeout 1800
no shutdown
the ap is joined with WLC:
EFFAT-WLC#show ap summary
Number of APs: 4
Global AP User Name: Not configured
Global AP Dot1x User Name: Not configured
AP Name AP Model Ethernet MAC Radio MAC State
APAP16.0009.abdc 3702I 1616.9999.8888 3c12.f123.0000 Registered
* have changed the mac address
but still i am not able to get the WLAN on the wireless clients. SSID is been broadcasted but when scanned on the client i am not getting it.Are you using any radius server ???
if yes then use this commands: aaa-override
Check this config :
http://www.cisco.com/c/en/us/td/docs/wireless/technology/5760_deploy/CT5760_Controller_Deployment_Guide/Secure_WLAN_Configuration_on_Catalyst_3850WLC5508.html
Hope it ehlps.
Regards
Dont forget to arte helpful posts -
I want to setup a custom webauth for my WLC 5760. I already downloaded the webauth bundle and put it in WLC via Command Download in WLC GUI. According to Guide, after the download completed, the custom page will appear in custom page dropdown for web parameter map.
But in my case it shows nothing. So where did I miss ?
Thank YouHi
Pls refer this document
http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117728-configure-wlc-00.html
HTH
Rasika
**** Pls rate all useful responses **** -
I have a new deployement with WLC 5760.
total number of aps are 150 with 4 WLANs.
each WLAN is mapped to a sperate VLAN. I have a couple of design questions:
- the switchport configuration of the AP will be trunk or access ?
if access, then port should be memeber of which VLAN ?
- mobility configuration for single WLC design ?
- I would like to make two groups in which group 1 will advertise WLAN 1,2 and 3 while the group 2 will advertise only WLAN 4.
is it possible ?
really apprecite your response.
RegardsHi,
Here is my responses
- the switchport configuration of the AP will be trunk or access ? if access, then port should be memeber of which VLAN ?
5760 only support Local mode APs. So all your AP connected switchports (in access layer) should be configured as access ports. You can put that in a different AP management vlan.
- mobility configuration for single WLC design ?
You can configure a mobility group name even though no any other controllers.
- I would like to make two groups in which group 1 will advertise WLAN 1,2 and 3 while the group 2 will advertise only WLAN 4. is it possible ?
Yes, you can create two AP groups & map these WLANs. Then add APs into these two AP groups according to your requirement.
These posts should give you some reference
http://mrncciew.com/2013/12/16/5760-in-ca-cuwn/
http://mrncciew.com/2013/12/12/getting-started-with-5760/
http://mrncciew.com/2013/12/14/3850ma-with-5760mc/
HTH
Rasika
**** Pls rate all useful responses ***** -
WLC 5760 - AP2600i failed to join ap-group after reboot
Hi,
We're deploying a couple of 2600i with an WLC 5760.
We've configured an AP group, named it "factory", and then issued the command ap name AP<ip mac address> ap-groupname factory for both APs. After the restart, both AP were on the AP-Group factory.
The problem is that is we reboot or power off the APs, one will join automatically the AP-Group factory and the other goes to default-group and requires the ap name APAPf872.ead7.31da ap-groupname factory to join the AP group factory again.
Any suggestion? Is it possible to forced the ap-group configuration directly on the cli of the AP?
WLC1#sh ap groups
Site Name: default-group
Site Description:
WLAN ID WLAN Name Interface
AP Name Slots AP Model Ethernet MAC Location Port Country Priority GroupName
Site Name: factory
Site Description:
WLAN ID WLAN Name Interface Radio
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
APf872.eaa6.fc69 2 2602I f872.eaa6.fc69 default location Te1/0/1 PT 1
APf872.ead7.31da 2 2602I f872.ead7.31da default location Te1/0/1 PT 1
debug ap group
(AP joining the apgoup factory)
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 1 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 2 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 3 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 4 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 5 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 6 for ap APf872.eaa6.fc69 apgroup factory
Sep 17 18:24:24.420: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 7 for ap APf872.eaa6.fc69 apgroup factory
(AP joining the default-group)
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 1 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 2 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 3 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 7 for apVapId 4 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 5 for ap APf872.ead7.31da apgroup default-group
Sep 17 18:30:36.078: apfRadioPolicySiteTableEntryGet: 1 wcm: found radio Policy 0 for apVapId 6 for ap APf872.ead7.31da apgroup default-group
Kind regards,
Vasco CostaWe've used a another group of 2600i APs and it seems that this problem only occous with AP "APf872.ead7.31da" so this is not a WLC problem.
closing case -
Hi All,
I have Cisco WLC 5760 at my company. I see some document that CISCO WLC 5760 not support FlexConnect. What i want is AP still function when Controller down. Any feature that WLC can do that?
Thanks in advances.5760 Access Point Stateful Switch Over (AP SSO) Overview
IOS XE 3.3 SE release for Cisco 5700 Series Wireless Controller introduces 1:1 Active-Standby redundancy model for HA with the CT5760 controllers using the StackWise-480 technology. HA in Cisco 5700 Series Wireless Controller is enabled using Cisco StackWise-480 technology. StackWise-480 identifies active and standby members in the stack as per the Cisco IOS Software SSO technology. All the control plane activities are centralized and synchronized between the active and standby units. The Active Controller centrally manages all the control and management communication. The network control data traffic is transparently switched from the standby unit to the active unit for centralized processing. The 12 ports of the CT5760 HA redundant pair can be connected to the infrastructure network either through a single switch or two switches.
Bulk and Incremental configuration is synced between the two controllers at run-time and both controllers share the same IP address on the management interface. The CAPWAP state of the Access Points that are in Run State is also synched from the active WLC to the Hot-Standby WLC allowing the Access Points to be state-fully switched over when the Active WLC fails. The APs do not go to the Discovery state when Active WLC fails, and Standby WLC takes over as the Active WLC to serve the network.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_HA_DG_iosXE33.html#pgfId-43188
Maybe you are looking for
-
I have an old blue and white clamshell laptop bought in Dec 2000. The hard drive has been corrupted. I don't have the cd's for it anymore. How can I get cd's to reinstall up to OS 9.2.2 and solitaire and a couple other games to play on it. Mac OS 9
-
How do I get this effect?
> This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3244557723_1857154 Content-type: text/plain; charset="US-ASCII" Content-transfer-encoding: 7bit Hi! I have a
-
Turning off AutoSplit (Import Options 3.4.5 / ML)
hi all. i seem to be finding DATED projects that split my imports up into weekly (or more frequent) projects and i am finding this /uber/ confusing since my PhotoStream projects are monthly dated. everything else is named something and it is very con
-
When using adobe photoshop cs6 screen turns white and locks up, have to logoff and log back on
Can't find an updated video driver, or cs6 update to fix this.
-
E4200 - PCs don't see each other and printer on USB port not working
I been around tech all my life. Acquired by MS when they had only 2000 employees. I don't get excited about tech. Its a tool to help you do something better, excluding games. I had the linksys wrt54... with booster antennas. Worked great, but could n