Authoring Enviornment - Test Elements and Online Tests

Hi Experts,
Is there a possibility to create online test within a learning net or learning object. I am able to create a test element within leaning net, but test elements are not interactive and the test answers and results are not stored. Where as if I create an online test, it is not attached/related with the leaning net. kindly help
Regards,
AA

Anyone......

Similar Messages

Are the Authorized Practice Test Suppliers supplying identical Materials?

There appear to be certain concerns that the authorized Practice Test Providers Self Test Software and Transcender are supplying identical materials (at least for recent exams).
Both organizations are now, to my best understanding, part of Kaplan IT Learning
By identical materials I mean identical Practice Tests (or where a substantial number of Questions are similar or one is a subset of the other).
The problem arises when a candidate, understandably wishing to maximize the number of practice questions they have, and trying to stay on the right path by using authorized providers, understandably buys practice tests from both only to find they have bought a lot of duplicate material.
This in my opinion a very bad outcome from trying to use the authorized practice test providers.
While the unauthorized sites in the+illegal+ end of he practice exam market are forever supplying the same materials it is bad if the authorized suppliers doing the same. (It is not enough IMHO for one to supply 20% more than the other but the rest of the questions in common and with a little extra additional notes beside).
I have emailed Transcender and Self Test Software to confirm this is the case or to explain/refute any allegations.
Please note all due acknowledgements for the poster of Re: OCP practice exam question for bringing this to attention.
PLEASE BE AWARE I HAVE NO FIRST HAND EVIDENCE THIS DUPLICATION OF MATERIAL SUPPLIED HAS IN FACT OCCURRED. It is actually possilble this poster may have accidently obtained material from a spoof site by mistake. But I certainly believed they were acting in good faith.
I have started a new question on this as the purpose if the other thread was which is the better supplier for 1z0-007.
Edited by: bigdelboy on 02-Oct-2009 09:52 : Overwrite Placehold with question.
Edited by: bigdelboy on 02-Oct-2009 10:16 (Minor alterations to add clarity, correct some typos and to make gender neutral).

Well I have received a email frm Kaplan IT Selftestsoftware saying according to their recording my complaint has been resolved.
and I have received a email frm Kaplan IT Transcender saying according to their recording my complaint has been resolved.
Both were from the same person.
They did give a link for their discussion board: my.kaplanit.com/Support/IT/itsweb/Lists/Service Desk complaints and suggestions/AllItems.aspx (requires username/password).
I think I can reasonably make the following statement:-
If you buy practice tests from both SelfTestSoftware and Transcender for a particular exam you risk disappointment in finding a lot of the tests and answers you recieve are duplicated.
IMHO Probably if you want slightly fewer answers and cheaper, go for SelfTestSoftware; higher quality and slightly more questions go for Transcender.
I think there's a big trap here for the unwary. There's nothing strictly wrong in Oracle saying they have two providers and not indicating they may have a comon provision source. Anyway there's some marketing guy somewhere dining well on some certification candidate's disappointments :-(
The would DISHONOURABLE springs to mind.
Edited by: bigdelboy on 19-Oct-2009 12:56 (Compliments to actions taken by Certification forum moderator about two posts down on this issue and truthful answers by Kaplan and actions being taken to advise Candidates to only purchase one set of testo only. I dont want to add a thankyou post at the end of thread as it obscures the correct answer slightly)

Bought PS Elements 12 online this morning, unfortunately my internet connection crashed and download was incomplete, how can i go back? I don't have mail yet from Adobe of my purchase... Getting worried...

Bought PS Elements 12 online this morning, unfortunately my internet connection crashed and download was incomplete, how can i go back? I don't have mail yet from Adobe of my purchase... Getting worried...

Go to http://www.adobe.com/downloads and click the Try next to Elements.
Once you have the trial installed, use your newly-purchased serial number to register it.

My Elements and Premier DVDs are corrupted physically. How can I install them via online instead?

I bought Photoshop Elements and Premeire Elements 10 sometime ago and forgotten about it. The box was sealed but the DVDs had streaks for white stuff and thus the drive is unaable to read. How can I install it via online? Please lead me to the link that I can key in the serial numbers as I am unable to find in this website. Thank you. As they have never been installed, the serial number is not in the my Adobe ID account yet. Hence I wish I can freshly install them via online. Thank you.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Photoshop Elements 10 online installation

I purchased Adobe Photoshop Elements 10 for my new Mac Mini running OS 10.7.5, however I do not have a DVD drive for the computer. Is it possible to download the software online?

I apologies for the convience
Here are couple of suggestions that could help you :-
1) Iif you have the DVD available for the Elements 10 already then copy its content on a USB drive and install it on your Mac mini.
2) Below are the link that will help you download the Elements 10 online.
http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Please read the instruction properly to avoid the error, I have already tested the link and it is for PSE 10.
3) You can upgrade to Elements 11, this link will give you the details :- http://www.adobe.com/products/photoshop-elements/buying-guide.displayTab3.html

Elements and Macbook

I have Elements 8 on my macbook and Lightroom 4. I am looking to upgrade to Elements 12 and may get the one with Premire. It says requires multcore intel processor 64 bit and mine says intel duo processor. I have Mac OS X 10.6.8 but planning on doing upgrade to mountain lion. Hoping someone has the time to tell me if all will run. Also any benefit over buying full versions over upgrades. They are close to same with Black Friday deals.
Mac OS X Version 10.6.8
Model Name: MacBook
Model Identifier: MacBook6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.26 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB61.00C8.B00
SMC Version (system): 1.51f53
Hard Drive Capacity :         249.72 GB (249,715,376,128 Bytes)
Free Space :         184.12 GB (184,116,461,568 Bytes)
Used : 65.6 GB (65,598,914,560 Bytes

Honestly, I'm not sure that 10.8 would run well on your hardware. Before buying PSE 12, I'd make a good clone of your current operating system to an external hard drive using something like SuperDuper, then upgrade to mountain lion and see how you like it before investing in additional software. With a clone you can always easily revert to your old system if you don't like it.
The black friday price for PSE is likely to be available again fairly regularly from now on, from big box stores and online retailers, so I wouldn't let that push you into making these decisions. You may find some hardware compatibility issues, you know, with scanners or printers after upgrading, so give mountain lion a good test drive before committing yourself.
FWIW, 4 GB of ram is not much for newer versions of OS X. My two year old macbook has 16 GB, for example. I had an imac with specs similar to yours and since I must run the latest versions of OS X and PSE, a couple of years ago I found it got fairly unsatisfactory, enough for me to buy a new computer. But try it and see how it works for you.

I'm using a 1D Arrary with 27 different elements and would like to send those data over UDP Write and UDP Read functions.

I'm using a 1D array with 27 different elements. I would like to transfer that data over a UDP connection, and read it back by using UDP connections.
But I would like to read 3 elements at a time (On read side) and send those to 9 different ports.
Note: the data will go to only one PC with one Network Address)
* 1st elements (0,1,2) and send to port #XXX to see those 1st 3 elements.
* continue until the elements reaches up to 27
This is what I have done but I'm finding myself in pitfalls...
Send side:
I'm using a UDP Open connection on send side to send my data. So with selected a Source Port, I have created a UDP Op
en connection. I�m using only one source port to send all the data across the channel. I would like to read 1st 3 elements and send those data across with an assigned Destination port. I would like to do that for 9 times b/c there are 27 elements in the array. So I�m using a For Loop and setting N count to 9. So I�m not getting any errors when I execute and no answer on the other side at all.
Read side:
I�m using a UDP Open connection to read in the data with port #. I�m using while loop to with Boolean inside by making a true all the time. Inside that While loop, I�m using For Loop to read the 3 elements data a time and send to a right port address. (As start out I was just trying to see if it works for only one port).
Attachments:
UDP_SEND_1.vi ‏40 KB
UDP_READ_1.vi ‏31 KB

You are not getting any errors because UDP is a connectionless protocol. It does not care if anyone receives it. Your example will work fine with the following considerations.
(1) Don't use the generic broadcast address (255.255.255.255).
(2) You are listening on port 30000. So why are you sending to port 1502, nobody will receive anything there.
The destination port of the outgoing connection must match the server port of the listener. (The source port is irrelevant, set ot to zero and the system will use a free ephemeral port).
(3) On the receiving side, you are not indexing on the received string, thus you only retain the last received element. Then you place the indicator outside the while loop where it never gets updated. :-(
(4) Do yourself a favor and don't micromanage how the data is sent across. Just take the entire array, flatten it to string, send it across, receive it, unflatten back to array, and get on with the task.
(You can do the same with any kind of data).
I have modified your VI with some reasonable default values (destination IP = 127.0.0.1 (localhost)), thus you can run both on the same PC for testing "as is". Just run the "read" first, then every time you run "send", new data will be received.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
UDP_READ_1MOD.vi ‏29 KB
UDP_SEND_1MOD.vi ‏27 KB

How large can a LabVIEW Queue in elements and bytes?

How large can a LabVIEW Queue in elements and bytes?

rocke72 wrote:
How large can a LabVIEW Queue in elements and bytes?
In
elements it is likely something like 2^31. In bytes it is most probably
around the same number or better, depending how exactly the different
queue elements are stored. I think they are stored as independent
pointers so it would be theoretically better than those 2^31. In
practice however starting to allocated so much memory in LabVIEW will
always cause problems on nowadays computers. Without 64 bit CPU and OS
going above 2 GB of memory per application is very hard and as far as I
know not supported by LabVIEW.
Also allocating many chunks of memory (like a few million queue
elements holding strings) will definitely slow down your system tremendously eventhough
it will work but the OS memory manager will be really stress tested
then.
Rolf Kalbermatter
Message Edited by rolfk on 06-09-2006 12:24 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Cannot share documents between On-Premises and Online Users by email invitation

We have a hybrid setup, no problems with email communications between on-premises and Microsoft Online users. We have also activated online Onedrive/sharepoint to start testing. One interesting thing is that users Online can share their documents by inviting
users who are on Microsoft Online, On-premises and outside this two systems. But the problem is with the users who are on-premises cannot share their documents by email invitation with the other users who are also on-premises, they can share the documents
with the users who are online only. When they try to share documents by email invitation they get error messages it their emailboxes saying that;
A communication failure occurred during the delivery of this message. Please try resending the message later. If the problem continues, contact your helpdesk.
Generating server: SMT947322-001.YLO001.MSOPRD.MSFT.NET
#< #5.5.0 smtp;550 Denied by policy> #SMTP#
It seems some kind of relay should be granted on my CAS servers or something like that but I am not sure of what should be added. I am just stuck as to what next step and where to start looking for the problem
Exchange 2010/2013 with Microsoft Online Office 365 Hybrid

No, just wanted to share documents using the invitation by mail in sharepoint/onedrive. We can share the documents normally without the email notification. Sorry to mention that even the users who are Online cannot share documents in sharepoint/onedrive
between themselves, so not between user on-premises and online users. For example a user selects a document in the library, click share and tick on by email, just gets an error
"#< #5.5.0 smtp;550 Denied by policy> #" , No RMS enabled yet.
Hi,
Sorry for my delay.
According to your further posting, the sending Denied cause is No RMS enabled yet. If that is the case, please activate Azure Rights Management (RMS) to check whether the issue persits.
When you activate Azure Rights Management (RMS), you turn on this feature for all rights-enabled services and applications. You must activate Rights Management before you can begin to use the information rights management (IRM) features within Office, SharePoint,
and Exchange. For details about how to activate RMS, please refer to:
http://technet.microsoft.com/en-us/library/jj658941.aspx
Regards,
Winnie Liang
TechNet Community Support

Interactive elements and even article zoom sometimes freezes on first page in Adobe Content Viewer r31.

Interactive elements and even article zoom sometimes freezes on first page of articles in Adobe Content Viewer release 31 (tested on iPad 3 and iPad Air). If user swipe to second page and return back to first page, all elements works normal again.
Interactive elements are mostly buttons for changing states of multi-state objects, or buttons for opening URL in build-in browser.
What could be the reason? Is there some bug in ACV r31? Or it alocates more memory for the application, so there is less memory left for the content? It wasn't happen before in r30.

hello, me the same thing is happening. I made a folio and he usually worked before the last update of content viewer. the multi-state buttons also freeze and take to work. This bug will be fixed in the next update?

Unable to use Organiser in both Photoshop Elements and Premier Elements

I am unable to use Organizer in both Photoshop Elements and Premier Elements. An error message appears, "The catalog could not be opened. An internal program error occurred."
I have tried to repair the catalog, starting a new catalog, and reinstalled both programs, but the error persists.
I am using Elements and Premier Elements V12 on Windows 8.1.
Any help to get me going again would be appreciated.
Thanks
Colin

Hello
Thanks for the suggestion, but it didn't make any difference.
However, by trail and error I have found a 99% solution.
Right Click the Elements icon on Desktop.
Select Troubleshoot Compatibility.
Select Troubleshoot Program
Select a problem option (I used Other)
Select Windows Version (Windows 8 for me)
Select Test the Program
If it works, which it did in my case, Save the settings.
This seems to have resolved my problem, with the exception that I now get an extra screen when opening Elements to allow the program to make changes to my computer. I can live with that.
When I get time I will check whether there are any Adobe or Windows updates that will make this step unnecessary.
I hope this will help other people with the same problem.
Thanks for responding.
Colin

Element and Balance Adjustment

Hi all,
We have a recurring deduction element. Lets call it ABC. Last month when ABC ran in payroll, it deducuted $100 rather than $50. Now in the next month's payroll we want to refund the employee $50 AND also show it on the Statement of Earnings.
The question is how do I go about doing this and adjust the element AND the balance associated with it.
Would appreciate a quick response. if possible.
Thank you all,
OB

Try this in test system.1. Do I make another element with the SAME name or I make an element with a different name but same settings?
You will not be able to have another element with the same name. So I think 2. Once I have made the element, do I just go to an employee's entries form and add it there?
Add an element entry of the same element and give an value of -50 in Pay Value.3. And lastly where do I EXACTLY add the refund amount?
refer A2

I purchased Adobe Premeire Elements and Photoshop Elements 10.0 in 2012. Since then my computer died.I would like to download them on this computer and am unable to do so successfully. Please advise. It was a downoad purchase with no CD

I purchased Adobe Premeire Elements and Photoshop Elements 10.0 in 2012. Since then my computer died.I would like to download them on this computer and am unable to do so successfully. Please advise. It was a downoad purchase with no CD

christineae
It is not clear if your Premiere Elements 10 was a downloaded purchase from Adobe or from an authorized reseller.
However, do you have a purchased serial number for the product?
If you have the purchased serial number, you can download Premiere Elements 10 tryout files from the following web site
and insert your purchased serial number in them during installation to make them your own.
Photoshop Elements 10 Direct Download Links: Free Trials, Premiere | ProDesignTools
It is important to read and carry out carefully that web site's "Note: Very Important Instructions" in order to avoid an Access Denied message.
Just in case message....
But there could be a complication with regard to files from any source.
Adobe allows you to have the purchased activated serial number on no more than 2 of your computers.
If your failed computer has Premiere Elements trapped on it representing 1 purchased serial number, you will be able to installed
the purchased serial number on only one more computer. If you have the purchased activated serial number trapped on 2 failed
computers, then you will not be able to use that purchased serial number on another computer until you deactivate at least one
on one of the other two computers. In this case, it is only Adobe who might be able to help you. None of this may apply to you. I mention
it as a just in case caution.
Please let us know if you have any questions or need clarification.
Thank you.
ATR

Am new to mac. Just purchased downloaded adobe photoshop elements and in order to open it, it wants a serial number. I downloaded it, so I don't have a redemtion number or a serial number. Obviously I am missing something; however I really do want to t

Am new to Mac. Downloaded Adobe Photoshop Elements and am trying to open it but they want a redemption code and a serial number. Since I downloaded it I don't have either of those but apparently I am missing something because I can't use it unless I enter that info and I don't know where to find it. Can you please help me figure this out. If I purchased the software I would have the serial number but as I said, I purchased and downloaded. Marianne

Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
-and https://forums.adobe.com/thread/1572504
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

Product information - photoshop elements and photoshop cc

Dear Sirs!
My brother (student - polytechnical school) and I (Student - university) are very interested in your products
Photoshop CC and Photoshop Elements 13.
What would you recommend and what are the distinctions? Would there be a possibilty to buy one of this two products once for 2-3 laptops/PCs
and in the Student and Teacher Edition? (no monthly subscription)
Thank you very much in advance for your kindly help!!
Kind regards
Kerstin

Mstina61
Could you clarify...what is not opening - Photoshop Elements AND Premiere Elements or just one or the other?
How did you install these programs, from installation files obtained online from Adobe OR from installation disc from a boxed bundled packaging of Photoshop Elements and Premiere Elements? Do you have purchased serial numbers or are you dealing with the tryouts?
Please excuse the question, but I do not want to take anything for granted...are you making a distinction between download and install if you are working from installation files obtained onlien from Adobe. In the latter case, after the download, you need to install the program(s) from the Setup.exe that comes with each of the programs.
Please supply more information and then we can decide on the appropriate troubleshooting strategy.
Thanks.
ATR

Authoring Enviornment - Test Elements and Online Tests

Similar Messages

Maybe you are looking for