Authorisation for Viewing R3 Reports via MSS

Hello,
We are running the following configuration
ERP 2004 (SP 16)
EP 6.0 (SP 16)
ESS 100 (SP 11)
MSS 100 (SP 11)
WAS 6.40 (SP 16)
i would like to know if there is any documentation that mentions the relevant back end authorisations needed
Regards,
Sunil

Hi,
Can you try using strutural authorisation. You can create a authorisation profile using evaluation path O-S-P and assign the profile to the managers. Then they will not be able to see it....or use the logical database of pnp and pnpce which also have the same charactristics
Thanks,
Pinki

Similar Messages

Create a mobile application for view BW reports.

I want to create a mobile application with MDK for viewing BW reports. It is possible ?

Hello,
I have a similar kind of requirement here.
I need to show BW data on wireless device...via Portal.
This BW data is a query, which is created using WAD.
In normal case, we just use the SAP BW Report iView, stick the Bex query in it and its all done. But in this case....how am to go about this...?
Ive read about Mobile WebDynpro but want to know that....Mobile Web Dynpro is an oline approach, does it mean that user will be able to drill down from the Bex query??
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Pls Help: View Crystal Report Via Oracle Form Builder

Hi!!
I want to know how to view the .rpt report (report made from Crystal Report) via Oracle Form Builder. I've to do it in my project. If you know, please tell me.
Thanks in advance,

I don't know how does crystal reports work, and I would guess you should ask the crystal guys to help you with this. find out if they have a command line interface that you can invoke from the host command in forms.
We can help you do it with Oracle Reports though :-)
http://otn.oracle.com/products/reports

Display authorisation for workbook (BI Reporting)

Hi Experts
Is it possible to set the authorisation for workbook (in release 7.0) in such way, that user can open the workbook but not save it? The authorisation object S_USER_AGR controls only saving of workbooks for roles. I've also checked the object S_BDS* and removed it from user's role but user can still save the workbook in favorites.
Regards
Robert

Hi Robert,
first make sure, that note 955715 is applied.
Saving in favourites is controlled by the objects
S_USER_TCD
S_USER_AGR
S_RS_FOLD
Further information can be found in the notes 373979 and 316470.
I hope this information is helpful.
b.rgds, Bernhard

Does Crystal Enterprise X support IIS ISAPI for viewing a report

Post Author: karthiknataraj
CA Forum: Upgrading and Licensing
Hi,
The Crystal Reports Web Component Server (Wcsinsapi.dll) is an Internet Service Application Programming Interface (ISAPI) compliant DLL. ISAPI is the programming interface that allows DLLs (like WCSinsapi.dll) to extend ISAPI compliant web servers functionality for processing HTTP requests. ISAPI DLLs are generally registered to handle HTTP requests for certain file types. This type of configuration is done by registering a file extension to the ISAPI DLL within IIS. For Crystal Reports the ".rpt" and ".cri" file extensions are registered to the Wcsinsapi.dll. Common behavior when the ISAPI registration is incorrect includes receiving an HTTP 500/501 error or being prompted to save to disk when trying to browse to a Crystal Report (.rpt file). This is supported by Crystal report 8.0 & I suppose the same in 9.0.
My questions are, is IIS ISAPI supported in Crystal Report X? Whether the RPT file can be launched in a browser with the parameters as query string (as in 8.0)? Why is the Wcsinsapi.dll not available in the crystal enterprise X installation?
I hope the answers to all the questions are, its deprecated. But I can't also find the documentation that clearly specified it is deprecated in crystal reports X. It would be greatly appreciated if any one can point to the documentation that specifically & clearly explains about this or correct me if I am wrong.
Thanks,
Karthik

Here are the direct links:
[1219293 - Error: 'Cannot get a reference to the Web Component Server: host: servername...'|https://service.sap.com/sap/support/notes/1219293]
[1215127 - Error: 'Request failed with code 7 and error message' in application event log|https://service.sap.com/sap/support/notes/1215127]
Regards,
Bryan

Authorisation for view config tables

Hi,
I wish to see data for all payroll related config tables in production system. Do you have a list of payroll tables or any standard role will help me. Thanks a lot.

whcih data u want to see
can u be clear
EX: SM30 call maintainence method
give table no as V_001P_C u will get assigment of enterpsirse structure with P S strtructure
Edited by: Sikindar on Jul 15, 2008 11:49 AM

Debug Authorisation for z report

hi all
i have requirment like this. one of the user wants to debug the report. i do not want to give debug authorisation for all z reports. i want user to debug only perticulatar program.
please tell me how to do programatically.
regards.
ulhas

Dear
contact for this to BASIS people they will give the authorisation .

Reports in MSS

By using the standard delivered report workset in MSS, any R/3 report can be called in MSS. However it launches the ITS server, request log-in to the SAP R/3 system and then presents the information in the traditional SAPGUI format.
How can interactive reports ( where I need to select the org unit, personnel number etc.) be designed as a Java iview ?
Thanks
Rachel

Any report that you write in ABAP has to run in ABAP context. You can easily view this reports via ITS(SAP Gui for HTML) or SAP Gui. If you need to pull this reports in JAVA then you will have to write a RFC function module to execute this report and pass the (formatted)data back to JAVA. Java will then render this formatted data.
You also skip the ABAP part and rewrite all this report completely in JAVA where it will only get the data from SAP via RFC. Formatting and reporting will done on the java side.

Can we launch Crystal Report via Browser?

Hi, Experts
I have created a Balance Sheet report (T-Style) with the help of BOBJ-Crystal Reorts.
But I wanna to consume this report via Browser, neither email with PDF/Excel attached, nor Crystal Report 2008 designer.
Is there any solution/tool to make this happen?
How can I implement it?
Thanks a lot.
Peter Zhou

You are able to view Crystal Reports via a browser in a few ways.
1. Report is published to Enterprise and you use Infoview to browse to the report and view.
2. Report is published to Enterprise and you use a custom application written in .NET/JAVA to view the report, loading it from your enterprise server.
3. Report is stored on disk and you use a custom application written in .NET/JAVA to view the report.
For viewing in a custom application please visit [diamond.businessobjects.com|http://diamond.businessobjects.com/]
The documentation for the SDK's can be found in the Developer Library, and sample code can be found under the Sample Code.

How to skip authorisation for infotype when using dynamic selection ?

Hi folks,
I have a problem here.
When im using dynamic selection screen, i cannot skip authorisation for subtypes of an infotype. Eg. if my record for 0185 have records that do not have authorisation for the subtypes. Dynamic selection will filter away this record and will not get me into the Get Peras as id i use to run has authorisation configured. IT will skip out of Get Peras.
However, if im not using dynamic selection screen, i will use the normal pnpce fields, i will be able to get the record, as i do my authorisation check using function module in the get peras, and i did not declare 0185 in the infotypes.
May i know if there is any solution to this problem as dynamic selection screen is a standard...
Thanks,
lihui

hi,
however i cannot skip authorisation for the whole pernr as i need the authorisations for the processing reports.
Currently the case is like this..
i have a authorisations for infotype 0185. i have 2 subtypes records such as ZA and ZB. the user does not have authorisation to read ZB but has authorisation to read ZA.
However, when use dynamic selection, it will skip out the pernr.
If the pernr 0185 records has only ZA subtype but no ZB subtype, it will not skip this pernr when using dynamic selection.
Anymore idea how to overcome this?

Report for viewing credit limit block released documents

Hello All,
Our client's requirement- credit limit check to be carried out and authorised persons can release the blocked orders.
But is there any report at month end to see how many documents were released and who released them Is there any standard report for viewing these or ABAP has to develop them? VKM2 transaction- released SD Documents would not show any released documents once billing is done i.e, once the sales documents is released it cannot be known who released it and when, how to track this?. so what can be the solution for this? Please suggest
Regards,
RAJ

Dear Raja,
Use VKM4 t code.
You can see both credit released sales orders and deliveries.
Put Overall credit status as D.
You can see how much value was released, when it was released. But with which user id it was released you cant see it.
Regards
Abhilash

Viewing HFR reports in the same window via task list url link

Does anyone know how to render an HFR report inside the Planning application or even in Workspace when referencing the report's url through task list? This is with version 11.1.1.3. It doesn't seem like this version allows the task list to be built to pull up the report within the Planning application window, or even as a separate Workspace tab. I also want to be able to switch from pdf or html preview when viewing the report, but this option isn't allowed when opening the report via task list. A separate pop up appears for the report, which isn't what I want.
Anyone know of a fix or workaround?

This sounds like part of your issue :-
9549216 - Instead of a new tab, a new window displays after you create a Financial Reporting task in Workspace.
Fixed in patch 11.1.1.3.02
Cheers
John
http://john-goodwin.blogspot.com/

Report for viewing Sales order no against delivery date & actual GI date

Hi Experts,
Is there any report for viewing Sales order no against delivery date & *actual GI date*
Because in VL06F , i can only able to get planned GI.
Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
Regards,
Sujit S.

dear Hrishi,
i followed your suggestion, but couldn't get desired results,
here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
thanks for your valuable reply.
@ G. Lakshmipathi ;-
i think i will need to develop z-report for fetching the data from the tables
VBAK (to get sale order reference) and
LIKP (to get delivery and actual GI date)
thanks for your reply,
Regards,
Sujit

How to set printersettings for the crystal report viewer in SAP BI dynamically

Hello
I have set the URL method for my crystal report and with parameter passing as shown below, it was displaying the crystal report viewer by connecting to the SAP BI 4.0 server with this method.
http://cr:port/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sDocName=CRLabelParam&sType=rpt&lsSnPrinted=0&lsSsTestProjectNr=1
This URL will be called from Web application by different users, i would like to set the printer settings differently for different users for this crystal report viewer how shall i need to set the printer options?
shall i need to set the printer settings programatically for each user. Please advise me how do i need to proceed.
Thanks & Regards,
Rajeswari.

There are no BI / CR APIs that would do this for you. The way I see it, you'll have to have your own print button and populate it with the correct printer information for each user as they request the report. Of course, alternatively, use the viewer printer button and get the users to choose the correct printer.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

View Crystal Report Layout for my UDO Form

Hi all,
I try to view a report created for my UDO form. I set all settings in Administration -> Setup -> General -> Report and Layout Manager. Now I wonder what should be assigned to eventInfo.LayoutKey. I tried assigned report's DocCode from RDOC, DocEntry of my UDO object or UDO Code but nothing works. Always get an error: Incorrect format of argument or something like that - I didn't get an error in English so I tried to translate it.
How to show a report layout for my UDO form?
Regards
Szymon Lipnicki

Hi and thanks for Your reply.
Help file contains example how to open report layout prepare in Crystla Reports designer for UDO form.
//Add Layout Key Event Handler
SBO_Application.LayoutKeyEvent += new SAPbouiCOM._IApplicationEvents_LayoutKeyEventEventHandler(SBO_Application_LayoutKeyEvent);
void SBO_Application_LayoutKeyEvent(ref SAPbouiCOM.LayoutKeyInfo eventInfo, out bool BubbleEvent)
    BubbleEvent = true;
    if (eventInfo.ReportTemplate == "A001" && eventInfo.ReportCode == "A001001")
        eventInfo.LayoutKey = 1; //Set the key of the layout
I am using SAP 8.81.
Regards
Szymon

Authorisation for Viewing R3 Reports via MSS

Similar Messages

Maybe you are looking for