Authorisation in BW 7.0 with Planning.

Hi All,
Have been setting up a new Authoridation object for our planning setup.
The planning team would like to set up multiple permissions on 4 agregation levels coming off the one multi provider. The new authorisation concept allows you to specify the info-provider as the multi, but does not allow you to specify the aggregation level which we want to limit it to. Most users read off this aggregation level, but there are a few who write to it, and I need to be able to differentiate between them in the Authorisation object, but assigning 02 to one lot, and 03 to another. But these people may not have write access to another aggregation level running off the same multi.
Is there an authorisation object that I have missed which I can add to specify the aggregation level in the authorisation object?
Second question is that if you use S_RS_AUTH to assign an Authorisation object to a role, is it only relevant for that role or will it's permissions carry accross to other roles a user might have?
Thanks for your help..
regards
Matt

Thanks Ravinda for your answer.
Is this using the new concept of security or the old one?
Don't you need some type of planning level object or agregation level object within the authorisation object rather than the role? If you authorise in the new security model it will authorise to the muli level, and if you wanted only certain users to view agregates above it they would all have access as the new model gives them access to the multi.
We are currently prefacing all queries with the agregate level they are giong through and we use this to secure in S_RS_COMP.....was hoping there was an object in the new security model which would allow us to select which Agregation level they were allowed to view so it could be tied up in the same auth object.
Can you control the planning level from within the new object?

Similar Messages

  • Change of sales order in combination with planned/released production order

    Hi Guru's,
    How do you deal with changes in the sales order in combination with planned orders and the scenario how to deal with release production orders?
    Can you tell me the SAP scenario, technically or reports or transactions or user exits, etc?
    Thank you in advance,
    Eric

    Here You have 2 scenarios
    1. Sales order changed at planned order stage
    In this case any chagne of quantity done in the sales order level will be taken care by the Planned order until it was not firmed .
    In case if it was firmed for the increased qty you will get a new planned order getting created.
    In case if it is reduced and if it was unfirmed it will get changed accordingly
    2. Sales order changed at production  order stage
    if the planned order was converted to production order change we can manually changes the respective Production order util no confirmation was done to any operations..
    is all this scenariors you are looking for if it is helpful let me know
    thanks..
    dskumar

  • SRM 7 PPS Classic Scenario with Plan Driven Procurement?

    Hello experts,  I want to know if the combination of  SRM 7 PPS Classic Scenario with Plan Driven Procurement is possible? or if there any limitation to consider? Our client needs to create purchase requisition in ERP -> send this purchase requisitions to SRM (as shopping carts) create bids - > quotations  - > create contract from accepted quotations and then from the contract we need to create purchase order but this one must be created in ERP (classic scenario) Someone has experimented the same situation? Best regards and thanks for your Help.
    Liam

    Hi Lima ,
    Classic scenario wont support PPS .
            - Stand alone and classic scenario not supported
            - Shopping cart renamed to Purchase Requisition
            - Shopping cart generate (pre)commitment in funds management
            - Contract can create Funds Reservation (Earmarked Funds) in Funds Management as a Guarantee
            - Goods Receipt and Invoice created in ERP
            - Mixed PO: PO with lines that works like contract lines, a PO can be created from these lines
            - PO created from contracts or mixed-PO is named call-off PO. Only is a new name, is a "normal" SRM      PO
            - Goods receipt possible in SRM only in "easy" cases
    Thanks & Regards
    Pradeep Kumar Dondeti

  • Production Order GR with Planned Price

    Dear All,
    We are using following steps for production order=
    1) Create BOM, for Semifinished material with Price control = "S"
    2) Create Roting, with all Keys PP01, PP02 and PP03 with Material allocation to respective steps
    3) Standard Cost Estimation using CK11N and CK24
    4) Create Production order using CO10 with Material and WBS Element.
    5) Material issue against Reservation. But the material may be changed after releasing prodction order first time. And Actual issue for the BOM material may be more or less in qty.
    6) Final confirmation with completion of last phase confirmation of production order.
    7) Production Order TECO
    8) Prodction Order Settlement using KO88
    Now my problem is while I am doing final confirmation the GR done is with Planned price (Based on BOM) + Subcontracting charges which it is set with production order while releasing it for the first time.
    Kindly tell me is the system behaviour is correct or wrong?
    We are expecting that GR should happen with the actual material issue price + Subcontracting charges only.
    Please reply.
    Thanks & Regards,
    Vishal Kadia

    Vishal,
    This is for your information.
    If you have production order of 1 EA- Starnadar Price =10 rs
    Raw material cost=5
    Activity Cost=2
    Overhead Cost=2
    So COM=9 rs
    Suppose after production order creation plan cost is 9 rs, hence after confirmation there is no varience (plan vs actual) so actual cost is also the same 9 rs.
    Now as you said if system will go for GR against actual cost, that will post in cost of good mfg account at the time of GR.
    As per std SAP after GR also you can issue the material to that order, hence if you will go for more goods issue of new material against that order (unplanned issue) of rs 5 for the same order then the actual cost will again change (recalculated), but for that oredr material is allready GR with actual cost, then you will not able settle the cost of newwly issued material on that order.
    So whatever the plan and acual cost GR will be done against std price maintioned in material master ( 10 rs)
    This is my understanding.
    Hopes that will clear your dought.
    Tara

  • Has anyone had issues with Planning security refreshing in Essbase

    I am on Planning version 9.3.0.1 and we are having issues with planning users being able to use an essbase connection to pull data from smartview. They are able to see data in web forms in planning but they get #no access when they try to connect to the same data in smartview.
    Has anyone else experieced this issue.

    If user works when you provision individually its because they were set in the environment in EAS.
    group has to have all the access needed (bug in orig). css file open a ticket for the file name. example user needs calc access you setup calc but bug in system is not also giving user read and write access. Thus you can individually add this to the group in provisioning area in shared services. in EAS goto File open- editors create/run script with
    alter user 'userID' Add application_access_type Planning;
    alter user 'userID' add application_access_type Essbase; to add user to the environment if error you need to refresh eas first then run maxl script for planning you also need to go to workspace and select any of your dimensions all your groups ...edit .. migrate identities.. to get group/Users in planning wether adding or removing users. when you do planning changes you need to do database and security filters refresh.

  • Problems with planning function in Web Application Designer in 2004s

    Hi All,
    I have a problem in WAD 2004s with planning function. I created a web template that includes a query. It runs on the enterprise portal, and I can edit this query. The problem is: I don't know how to save this edited query, because when I use the button with function save, the new value doesn't appear in the relevant info cube.
    Anybody can help me how to save the new values to the info cube?
    Thanks in advance
    Dezso Toth

    I don't know if you ever resolved this, but you may just ned to change a setting on your query properties.  When data is entered into planning layouts and saved, that data is put into a "yellow" request in the underlying infocube. 
    Until the necessary volume of data is posted which causes this to change to "green", it remains yellow.  Note that this request could also be changed to green several ways.  i.e. manually, by flipping the "real-time infocube behavior" switch, etc. 
    Anyway, as long as it "yellow" your query, by default will not consider it, unless you change it's properties to tell it to consider "yellow" requests.  This can be done via RSRT and pressing the "properties" button.  Choose request status "2" and your problem should be solved

  • Planning with planning material

    Hi All,
    I am working on the make to stock scenario where I am working on the strategy 63(planning with planning material).
    As per scenario once I entered the sales order for variant material it should consume the PIR of the planning material but it did not happen with my case. I maintained the necessary master data for both the material like consumption parameters for planning material, strategy group 63 for both the materials, planning material for the variant material and individual and collective indicator for both materials but it didn't work.
    Can you please provide me the reason why it is not happening?
    Thanks in advance
    Lalit

    hi
    The system finds requirements type VSEV because the strategy group has been set to 63.
    See the Table of Planning Strategy Assignments.
    The requirements are passed on to MRP. The stock/requirements list (Logistics -> Production -> MRP-> Evaluations ->Stock/reqmts list) displays the information for the planning material.
    The planned orders are not yet "real," because the variant product cannot be produced until after receipt of the sales order. Technically speaking, the planned orders have order type (VP). It is impossible to convert these (VP) planned orders into production orders, or to use them in a repetitive manufacturing environment. The Conversion field in the display of the planned order is not set, which indicates that it is not possible to produce this planned order.
    The MRP run also creates procurement requisitions for the components
    The main objective of this strategy has now been reached: procurement for the components has been triggered, even without sales orders, based on the sales forecast from Demand Management only. Procurement of the components can occur in a variety of ways. Here we are assuming that a goods receipt (for a purchase order, for example) takes place.
    A sales order for a variant material is entered
    · Suppose that, for this example, an order with a quantity of 90 pieces is entered with a required delivery date of today. This order can be confirmed after the first planned independent requirement date
    · The consumption parameters have been maintained correctly ( Consumption mode, Bwd consumption per., Fwd consumption per.) in the planning material.
    · This date and the planned independent requirements can be found.
    For more information, see Consumption Strategies and Logic.
    award points if useful
    Regards
    ramesh

  • Statistical WBS & WBS with Planning element in summarization

    Can statistical WBS and WBS with planning element are included in summarization?
    Thx

    Hi,
    Summarisation reports output  are same as the equivalent standard reports but they vary only in the hierarchical display of values. The hierarchy of the report depends on the fields you are using to create a summarisation hierarchy.
    Regards,
    Arul.

  • MDBT  with planning date in Past "01.01.2010".

    Hi Guru,
    I need some help.
    Scenario: We made one variant in  MDBT  with planning date in Past "01.01.2010". But I could not Analise the effect of same.
    Can any one share what is the effect of planning date in Past.
    Thanx & Regd
    PNU

    Hi,
         creation of varient in the past date will not have any effect. All  that effects is scheduling the varient.
    Correct me if i ma wrong.
    Thanku
    krishna

  • Usage of BAPI BAPI_ACC_ACTIVITY_ALLOC_POST with Plan-Tarifs

    Hello together,
    I have a question:
    We want to use BAPI BAPI_ACC_ACTIVITY_ALLOC_POST but only with plan-tarifs and not with actual tarifs.
    Is it possible?
    Kind regards
    Udo

    Answered

  • Is ODI 10.1.3.5 compaitable with Planning 11.1.2?

    Hello,
    We are upgrading to Hyperion 11.1.2 (specifically Planning and Essbase) and we need to know if our current ODI 10.1.3.5 will be able to connect and load to the new version of the Hyperion software. It would save a lot of time and effort if we did not have to upgrade ODI at this point.
    Thanks for any help,
    Nick

    ODI 10.1.3.6 is supported with Planning 11.1.2.x
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Connecting ODI with planning

    Hi all,
    Iam using ODI 10g with planning 11.1.2.1 in 64bit platform, both the servers are intalled in the same machine. Im trying to load metadata to a planning application through ODI, but when trying to do reverse in Developer, its throwing error:
    org.apache.bsf.BSFException: exception from Jython:
    Traceback (innermost last):
    File "<string>", line 32, in ?
    com.hyperion.odi.planning.ODIPlanningException: Could not connect the Planning instance on host [hyperion], port [19000], check if connect information is correct.
    my workspace url:
    http://hyperion:19000/workspace/index.jsp
    I checked my planning port in EMP configurator, and it was 8300 while my HyperionRMIregistrystdout file has port 11333.
    what is the port number that i need to use while creating a planning data server ?Now should i use an agent to complete the reverse? And is it necessary to install JDK to run the agent?
    Please

    Thanks SH for the reply. But could you please help me with the other two questions that ive asked.about using an agent and about jdk..how should i proceed to do a reverse of planning application. coz even with 11333 the agent fails to connect successfully.
    getting the following error:
    ava.lang.Exception: Socket disconnected
         at com.sunopsis.dwg.dbobj.SnpSession.remoteExecuteTest(SnpSession.java)
         at com.sunopsis.graphical.r.bz.actionPerformed(bz.java)
         at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
         at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
         at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
         at javax.swing.AbstractButton.doClick(Unknown Source)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(Unknown Source)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(Unknown Source)
         at java.awt.Component.processMouseEvent(Unknown Source)
         at javax.swing.JComponent.processMouseEvent(Unknown Source)
         at java.awt.Component.processEvent(Unknown Source)
         at java.awt.Container.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
         at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
         at java.awt.Container.dispatchEventImpl(Unknown Source)
         at java.awt.Window.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
         at java.awt.EventQueue.access$000(Unknown Source)
         at java.awt.EventQueue$1.run(Unknown Source)
         at java.awt.EventQueue$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
         at java.awt.EventQueue$2.run(Unknown Source)
         at java.awt.EventQueue$2.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.security.AccessControlContext$1.doIntersectionPrivilege(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    thanks
    Edited by: foolish barber on Aug 20, 2011 11:28 AM

  • Talent Management (Employee Objective Info with Plans..)

    Hello All,
    I am devloping a disc report.
    I need information abt empoyee objectives along with plans also info about payrolls,people gruops..etc...So Used the follwoing query can any kindly let me know whether the below query is correct or not..(It is retreving few records)
    SELECT papf.employee_number, papf.full_name,
    papf1.employee_number supervisor_id, papf1.full_name supervisor_name,
    hou.NAME organization_name, pj.NAME job_name, po.NAME objective_name,
    po.comments, po.success_criteria, ppf.payroll_name, ppf.period_type,
    ppg.group_name, po.measure_name, po.measure_comments, ppmp.plan_name
    FROM apps.per_all_people_f papf,
    apps.per_assignments_f paf,
    apps.per_jobs pj,
    apps.per_objectives po,
    apps.per_all_people_f papf1,
    apps.pay_payrolls_f ppf,
    apps.pay_people_groups ppg,
    apps.hr_organization_units hou,
    apps.per_appraisals pa,
    apps.per_perf_mgmt_plans ppmp
    WHERE papf.person_id = paf.person_id
    AND paf.job_id = pj.job_id
    AND papf.person_id = po.owning_person_id
    AND papf1.person_id = paf.supervisor_id
    AND paf.payroll_id = ppf.payroll_id
    AND paf.people_group_id = ppg.people_group_id
    AND hou.organization_id = paf.organization_id
    AND po.appraisal_id = pa.appraisal_id
    AND pa.plan_id = ppmp.plan_id
    AND TRUNC (SYSDATE) BETWEEN TRUNC (papf.effective_start_date)
    AND TRUNC (papf.effective_end_date)
    AND TRUNC (SYSDATE) BETWEEN TRUNC (paf.effective_start_date)
    AND TRUNC (paf.effective_end_date)
    AND TRUNC (SYSDATE) BETWEEN TRUNC (ppf.effective_start_date)
    AND TRUNC (ppf.effective_end_date)
    AND TRUNC (SYSDATE) BETWEEN TRUNC (papf1.effective_start_date)
    AND TRUNC (papf1.effective_end_date)

    Hi,
    You haven't used any outer joins, and are therefore assuming that every employee has a current supervisor, people_group, organization etc. all set up.
    Rod West

  • Which settings are required to consume calls for stock transfers with planned independent requirements

    Dear SAP PP
         With strategy 10, which settings are required to consume calls for stock transfers with planned independent requirements?
    Regards

    Hi all,
    IF other configuration is require ?  How to implement this requirement?Also please explain in detail.  thanks

  • Delete position with plan version .:

    Dear all,
       I need to delete a position which was created with plan version .:
      Report RE_RHRHDL00 doesnt let me do so, it send the following error message: Maintance in customizing plan version is not allowed.
      Any one knows a way to delete it?
    Any help will be greatly appreciated and rewarded,
    Thanks in advance,
    Fede.

    Guys,
        PO13 doesnt allow modifying objects with plan version .:
        I could delete the object doing a manual transport, in transaction OG00. I marked "delete object" and it created an order, which was transporter to production. It worked just fine.
    Thanks,
    Fede.

Maybe you are looking for

  • Sound not working in games and video!!

    Hey everyone, for some reason I can't get the audio to work in all of my games. The computer is hooked up to speakers and works but nothing plays in the game. I have the volume settings on and everything. Sometimes the music works but the sound effec

  • Does Time Machine backup system files (/usr/local/*)?

    Does Time Machine backup system files (/usr/local/*)? If so how do you locate them in the Time Machine interface? If I go into Time Machine mode and type say "/usr/local" in the Time Machine search bar I get nothing although I can open a terminal app

  • Special GL posting in Logistic Invoice Verification

    Hi.. We want to post / clear down payment / Deduct the amount t to special GL Account. . SAP Standerd not suuport such functionality. Any one using such functionality in LIV (MIRO TRANSACTION).  Need your help / suggestion for same. Thanks in advance

  • TG4MSQL ora-28500 error on RECOVER login in READ-ONLY mode

    We're connecting from a 10.2 dbase to SqlServer2000 via TG4MSQL. No upfront problem connecting but the Oracle .trc file shows below error: ORA-28500: connection from ORACLE to a non-Oracle system returned this message: [Transparent gateway for MSSQL]

  • How to create Infoset&user group query--(query report)

    Hi Guys,   how to create Infoset&user group query--(query report),   Pls send me the exact procedure with Example....                                                                           Regards: