Authorisation issue - the report is running and
Hello friends,
Need some help .
There is one salary report , which user is not able to see the data . It is running and running for 1/2 hours
and finally the message coming that action is cancelled.
I have checked the data flow and everything seems correct .
It seems the problem with user authorisation .
How could i check the User id authorisation for this specific salary report. ?
I am not aware about the more thing in authorisation.
Thanks in advance.
Regards
I feel this is not authorisation issue. But i am not sure.
Any way.
Run that report in tcode RSSMQ with that particular user id and try to check SU53 Tcode in another window for that user id immediatly after getting error message while running the report
RSSMQ - Runs report with other user ids
SU53 - gives information on authorisation problems if any (It is authorisation Trance)
Thanks.
Edited by: BI Dev on Jan 3, 2008 5:29 PM
Similar Messages
-
Authorisation issue . - Report is running and running
Hello , By mistanly i resolved the last thread .
Yes , i have excuted the report by using RSSMQ and with the user id . I found the below messge .
Full Authorisation is requiered for this selection option .
A displayed hierachy requires option .
Could you please let me know , how i can solve this issue now .?
Thanks in advance.
Any way.
Run that report in tcode RSSMQ with that particular user id and try to check SU53 Tcode in another window for that user id immediatly after getting error message while running the report
RSSMQ - Runs report with other user ids
SU53 - gives information on authorisation problems if any (It is authorisation Trance)
Thanks.
Edited by: BI Dev on Jan 3, 2008 5:29 PMI feel this is not authorisation issue. But i am not sure.
Any way.
Run that report in tcode RSSMQ with that particular user id and try to check SU53 Tcode in another window for that user id immediatly after getting error message while running the report
RSSMQ - Runs report with other user ids
SU53 - gives information on authorisation problems if any (It is authorisation Trance)
Thanks.
Edited by: BI Dev on Jan 3, 2008 5:29 PM -
Running the report in Bitmap and Character mode
Hi,
We have the reports which can run in both the character mode and Bitmap mode. The only problem I'm facing is font size in the character mode report. If the report is run in Character mode then the font size of the report will be greater. As the sizer is bigger, I'm getting the X symbol in the place of report. Can i reduce the size of the font. I'm using the font Tahoma (8 points). Reports 6i Version and Windows Xp is the OS.
Regards,
Alok DubeyHi this may solve u'r problem
In Oracle Reports Designer, bitmap mode, you can make "C"
bold and in a different font and point size than "c". This
is because you are generating postscript output.
Postscript is a universal printer language and any
postscript printer is able to interpret your different
design instructions.
In Oracle Reports Designer, character mode, the
APPLICATIONS STANDARDS REQUIRE the report to be designed in
ONE FONT/ ONE CHARACTER SIZE. Character mode reports
generate ASCII output. In ASCII you cannot dynamically
change the font and character size. The standard is in
effect so a report prints as identically as possible from
both conventional and postscript printers.
by....
stanma -
How to know what reports are running by looking at SSReproting Services to see what reports are running and also any clue of which application is using the reporting services?
To see what reports are running, take a look at the execution log views that are available in the database. Which views that are available are dependent on your version of SSRS.
http://technet.microsoft.com/en-us/library/ms159110.aspx
To see which application is using SSRS is a little more difficult. You can turn HTTP logging on, which will give you an idea of where connections are coming from, so you can see IP addresses. You can also look at the execution log view to see
user accounts. So, depending on your environment and use of service accounts, this could be easy, or difficult.
http://technet.microsoft.com/en-us/library/bb630443.aspx
If all else fails you can look for clues in the SSRS logs. Good luck... -
How do I find the report server name, and then run paper report from forms?
How do I find the report server name, and then run paper report from forms?
I am having a problem running report 9i from forms 9i (see below thread). How do I find out the name of the report server? I checked my C:\ids\reports\conf directory but don't see anything that gives me the name of the reports server. I also don't have a iashome directory.
Also, I just want to run the paper report (not the web version).
Thanks.Hi,
please read teh Forms / Reports integration paper in teh Collateral section for Oracle9i Forms at otn.oracle.com/products/forms
In summary, you have to create an external Reports Service that you can then give a name.
Frank -
Hi Experts
I had a requirement for the Query, when we executing the through slection screen we will be giving 0fiscyear "from and to" dates. the "Valid to" (0date) has to check the relation of the Client partner and contract of relationship, if it is within the current date it should dipslay the report with values , if it is out of current date, it should display in the report as "null".
Logic : This report is based on the u201CClient Partneru201D and the u201CContact ofu201D relationship. If any of these relationships have a u201CValid Tou201D
date set before the date that the report is run u2013 print u201Cnullu201D.
Could anyone of you provide the inputs on this.
Thanks in advance
Thanks
Sekhar.PIvanLevo wrote:
Could not find the /Library/Startup Items.
Good, it shouldn't be there.
For your Dock problem,
Go to your Finder "Go" menu choose "Go to Folder" and enter ~/Library/Preferences. Then delete these files then restart or log out and back in.
com.apple.Finder.plist
com.apple.dock.plist
com.apple.dock.db
com.apple.dock.extra.plist
Let us know -
Need to Build the report on Campagins and custom object 01
Hi All,
I am building the report on campaigns and customobject 01 ,But wen i build the report i was not able to get all the project ID that are associated to the campaigns.
The issue is when i pull the campaign id it wont fetches all the ID for customobject01 (becoz the relation is M:M)
Can u please guide how to build the report.
Regards
AnuHi,
you can try to add the metric fields to your report for all involved objects, like # of Campaigns, # of Projects and # of Custom Object 1. Afterwards you can hide these fields from layout. For me this has always helped.
Regards -
How to print the report file name and path and the last mod date
Good morning,
I am trying to print on the footer of the report the report file name and path as well as the report last modification date.
Anyone would know how I can do that? I have checked the doc but found nothing.
Thks. Philippe.Did you ever determine how to print report name and report last mod date?
Thanks -
I upgraded a week ago and every since it constantly stops in the middle of running and says "Mozilla Firefox not responding" the screen goes grey and the the little blue circle goes around and around its so annoying and does it all the time like while I'm typing this it has happened twice, it didn't do this till I updated.
hummm never had it do that till I upgraded last week PLUS I lost all my Favorites/Bookmarks that really pissed me off my husband and I lost ALL of them I have had them for years and I upgrade and lose them can't even tell you how mad we were 8o/ very frustrating to say the least. Thanks for your help!! CRAP it just did it again I guess it didn't work........GRRRRRR!!!! I'm atta loss 8o(
-
The last day of the month when the report is run
Hi,
I am working on custom outbound idocs for FICO module through INTERFACE Program the third party sytem needs <b> "The last day of the month when the report is run"</b> so is there any sytem field or standard SAP Sytem Table field which can give me that value.plz let me know ASAP.
Other wise should i develop custom logic.Hi,
Try this way.
Selection-screen
PARAMETERS: p_bldat LIKE bsis-bldat .
INITIALIZATION.
DATA: v_end_date LIKE sy-datum.
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
EXPORTING
day_in = sy-datum
IMPORTING
last_day_of_month = v_end_date
EXCEPTIONS
day_in_no_date = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
p_bldat = v_end_date.
Thanks,
Anitha -
Failed to export the report \n Crosstabs and OLAP grids are not supported in this export format
Post Author: ajaymoudgil
CA Forum: Other
We are using Crystal Reports (Product Version: 11.0.0.1282). We encountered with a problem while we are going to export report in CSV (Separated Text). The report Contained Cross-Tab. Its Shows the Error Message u201CFailed to export the report \n Crosstabs and OLAP grids are not supported in this export formatu201D. Please find the attachment with this mail having screen shot for the same.
We were able to export CSV (Separated Text) Format in Crystal Report Version 7 for the same report. Please let us know any way(s) so that we will successfully export the report in CSV (Separated Text) format in Crystal Reports version 11.
Thanks,
Ajay SharmaHi Ludek ,
Thanks for reply,
I download CR2008 Redistribale & Installed it.
But still I am getting following error on client PC;
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
Please give solution.
Thanks -
How to generate the reports in BI and display in EP ?
Hi All
I am new to BI but i am working on EP
Can any one help me how to generate the reports in BI and should be displayed
in EP frontend? So what and all settings and installations i need to do ?
Any documents on this will be really helpful to me..........
Adv...thanks and regards
KopsHi kops,
Check the links below.What you need is there..
How can i place a query developed in BEX to portal
http://help.sap.com/saphelp_nw04s/helpdata/en/43/92dceb49fd25e5e10000000a1553f7/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm -
I just replace my hard drive on my imac and now when i turn the computer on the fan starts running and keeps getting louder. How do i turn it off?
thanks.If your machine was made after 2009 you probably installed th wrong HD. Beginning in 2009 Apple began using HD's that had an integrated fan sensor. If you did not use one of these drives then that is the problem. You should contact OWC (www.macsales.com) or visit your local AASP and they will help you select the correct HD to use.
-
<table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"></tr><tr><td height="1" style="font-size: 1pt"></td></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p>I initiate a CR XI from a C++ routine using ShellExecute command, the report file is opened and the C++ program continues to execute, this is working fine, now I need the following two things:</p><p>1. When the report is invoked I would like it to run and print the result either to a printer or to a file.</p><p>2. I need to send the report parameters since it will not prompt for it if it runs automatically.</p><p>Thanks in advance for your help.</p></td></tr><tr></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p> </p></td></tr></tbody></table></blockquote></blockquote>
Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly
-
Key figure values vary each time the report is run by different users
Hi All,
We are facing a unique problem, here it goes :
Different users are getting different values for the same key figure, when executing the same query on the same selection conditions.Each time, user executes the report, he is getting varying values for the same key figure.Any idea's how to resolve this issue??
Thanks in Advance
BinduHi Bindu,
One reason might be due to authorizations as discussed earlier.
check how frequently is the cube getting refreshed.
This might also happen that if users are running the data at different times and there is a cube load in between.
check for this.
Cheers,
Srinath.
Maybe you are looking for
-
How do I import my address book after doing a clean install of Leopard?
I just finished doing a clean install of Leopard and I realized that I forgot to export an Address book archive before erasing my hard drive. I still have all the Address Book files stored in Application Support in my Library (on my backup hard drive
-
PPS1UW Print Server no drivers for Windows 7 64-bit
I have a HP LaserJet 1200 printer attached to the PPS1UW and had no problems getting Windows XP and 32-bits Windows 7 to print. I am not having any luck with my new Windows 7 64-bits machine - the supplied software refuses to work in 64-bits, not eve
-
How to get the path of local folder in native services in windows phone 8.1 ?
I used to get the path of local folder path in managed code by following -Windows.Storage.StorageFolder localFolder = Windows.Storage.ApplicationData.Current.LocalFolder;But now I need to get the local folder path in native services .Please help me o
-
Entering login&password only one time?
Hello, we have an appllication that is called from another by opening new brower window with URL http://..../pls/htmldb/f?p=107:1:::::P1_ID:12345 The user is redirected to login page and after succesfully enter his login and password id redirected to
-
How do I cancel an itunes magazine subscription
Please help, I have called Appled (no help) and tried everything I know to get a magazine cancellation on itunes.