Authorisation settings in Q and P

Hi All,
We have created some authorisation objects to enable the reporting security and transported them across to Q and P. However, I found that the settings to enable the checking for particular infoproviders haven't gone through i.e when we click on "Checked Authorisation Objects for All Infoproviders" button in DEV, I could see the check marks for the infoprovider but when I do the same in Q or P, the check marks are not ticked.
What should I do to get these check boxes ticked also in Q and P? Can I do the changes(tick them) directly in Q and P?
Thanks,
RPK.

When you transport the inf object, the authorization settings will go with this.
When you transport roles ( in role set authorizations for various authorizatin objects), authorization objects will be transported.
Ravi Thothadri

Similar Messages

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

HT204150 iphone4s contacts wont back up to icloud my settings are on and in icloud i cant open photos?

iphone4s contacts wont back up to icloud and my settings are on and also when in icloud i cant open photos?

Did you ever verify the primary email address associated with her iCloud ID? Apple should have sent a verification email like the one below to the email address that was used to set up the iCloud account. You need to click the Verify Now link in the email to verify the address.
Make sure you are check the email address you used to set up your iCloud account. Also make sure you check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

Make sure your network settings are correct and your network connection is active, or try again later; Have been trying to fix for ages.

Hi Everyone, been struggling all day to restore my settings on my ipod, as my little brother has put a restriction password in place and made me not able to get into Safari, iTunes, Camera which I really need. I have tried everything, resetting my proxy settings, turning off the firewall, changing my network location, ran diagnostics. Everything seems fine on that, I post below my results. I also tried restoring from the device, but with the restrictions code in place I can not do so. And everytime I am dowloading the software update before the restore it comes up with 'Make sure your network settings are correct and your network connection is active, or try again later'. I have been using google for ages and am not sure what I have missed.
I am using Windows 7 with an Acer Notebook.
DIAGNOSTICS:
Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
Acer Aspire One 753
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00BCBEE0093E4EF0
Current user is not an administrator.
The current local date and time is 2013-04-05 19:32:36.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:     {E1CB97AA-CDFF-4C43-8F63-658D7E70A39F}
Description:     Intel(R) Centrino(R) Advanced-N 6205
IP Address:     172.16.42.14
Subnet Mask:     255.255.255.0
Default Gateway:     172.16.42.1
DHCP Enabled:     Yes
DHCP Server:     172.16.42.1
Lease Obtained:     Fri Apr 05 19:01:59 2013
Lease Expires:     Fri Apr 05 20:01:59 2013
DNS Servers:     172.16.42.1
Adapter Name:     {44D6CC7B-1F1E-4F26-BBB8-18F98A868E2B}
Description:     Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
IP Address:     0.0.0.0
Subnet Mask:     0.0.0.0
Default Gateway:     0.0.0.0
DHCP Enabled:     Yes
DHCP Server:
Lease Obtained:     Thu Jan 01 11:00:00 1970
Lease Expires:     Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:     LAN Connection
Connected:     Yes
Online:          Yes
Using Modem:     No
Using LAN:     Yes
Using Proxy:     No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-02-14 17:34:33.
**** Device Connectivity Tests ****
iPodService 11.0.2.26 is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
Daniel Pugh's Ipod, iPod touch (4th generation) running firmware version 6.1.3
Serial Number:     C3XDN3C5DCP7
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 5.0.1
Serial Number:     C38GKQWZDT9Y
**** Device Sync Tests ****
Sync tests completed successfully.
Kindest Regards
Daniel (Puggy858)

Hi Diesel vdub,
Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

I want to give my iphone to my freind and thus I tried to Erase all contents and reset everything. I went settings-general-erase and reset. But while it was being processed, power supply went off. I have connected back to power but after 4 hours no repson

Can anyone advise me how long does it normally take to reset while doing- settings-general-erase and reset all settings.It has already taken 4 hours and only the apple logo is being displayed yet. I am little bit worried if the operating system will not be restored.

Use the following steps to place your device into recovery mode. If the device is already in recovery mode, you can proceed immediately to step 6.
Did you do this?
Disconnect the USB cable from the iPhone or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the the iPhone or iPod touch to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPhone. When you reconnect the USB cable to iPhone, the device should power on.
Note: If you see the screen pictured below, let the device charge for at least ten minutes to ensure the battery has some charge and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
If necessary, open iTunes. You should see the following "recovery mode" alert:
Use iTunes to restore the device.
If none of these works, visit your nearest Apple Retail Store, Apple Authorized Service Provider or wireless carrier.
Cheers!

I have set my daughter up a user account on my pc. I have got her own itunes set up and she has signed in with her apple id etc. no problem but, despite all the settings being right and music being selected i cannot get her ipod to sync music.

I have set my daughter up her own Itunes on my pc but, despite all the settings being right and having logged in on her own account it will not sync music. the first time she tried it wiped any music off that is on there and now will go through sync but music is still not syncing to the ipod. it also shows on the bar at the battom as audio content being there but wont appear.

- Restore from backup. See:
iOS: How to back up

HT1977 I purchased a game on my ipod touch. I restored the device to factory settings last night and when I synced all the apps back, the game is now in the demo version. How do I unlock it ? I hope I don't need to pay for the full version again.

I purchased a game on my ipod touch. I restored the device to factory settings last night and when I synced all the apps back, the game is now in the demo version. How do I unlock it ? I hope I don't need to pay for the full version again.

PES 2012 is no longer available in the US App Store and only on the British App Store currently.
http://pes-2012.en.softonic.com/iphone
That (an app no longer available) happens sometimes.
Your only way is if you have the appt on your computer such as in the recycle bin/trash or in a computer file backup. In that case move it to your iTunes library and sync.

Access Denied Error while accessing "Site Settings Access requests and invitations"

Hi,
I am getting Access Denied Error while accessing "Site Settings > Access requests and invitations" in SharePoint 2013 online. Currently I am the owner of the site and have "FULL CONTROL" access. I am able to access using
site collection account. So, what permission I have to give my regular account to access this page?
Thanks, Pal

Hello,
Have you recently changed the Owners group of the site collection or removed the user from the original owners group?
The reason I am asking is when the Access requests and invitations list are created, the permissions are given only to the default owners group at the time that the Access Request list was created. If this "regular account" is not part of that owners
group, the user will receive access denied. Site Collection Admins always have permissions for the Access Request List.
A workaround for the Access Denied issue is listed in the KB article http://support.microsoft.com/kb/2911390/en-us. By giving the correct group or user the permissions to this list, the users will not receive
the Access Denied issue anymore.
Preferably, in order to grant the user the full permissions ( you will see features like resending invitations may still fail after implementing the above workaround) there is one other workaround that may be required depending on what the original issue
was. Below are additional steps to restore full functionality.
1)Access the /_layouts/15/permsetup.aspx of the site collection, make sure the default Owners Group
is set correctly. (There is a group selected)
2) Add user to that Owners Group. (Issue may be resolved at this step if the site collection Owners
Group was never changed, if not continue to next step.)
3) Implement workaround on http://support.microsoft.com/kb/2911390/en-us, by adding that owners
group as Full control on Access Request list Permissions.
Let me know how this works out for you.
- Shpendi Jashari

Error in config. settings in OY04 and OY01

Sir,
The Configuration settings in OY04 and OY01.
In OY04 , for japanese Yen decimal places have been kept 0.
whereas in OY01 , Decimals format is XXXXXXX.00
There is a difference between OY04 and OY01 decimal format.
' Either entry in OY04 for JPY has to be deleted ' or ' Decimals format in OY01 has to be set to XXXXXXX,XX
If this is not corrected , the value is truncated to 2 decimals places prior to saving to database.
Please advise me the better solution.
Regards,
Srinivasa Murthy.

sir,
In OY04 i deleted entry related to Japan Yen ie. with 0 decimals. This solved my problem. But already created orders with Japanese YEN had to be deleted.
For the orders created with new configration , the issue is rectified and Net price as well as the PO value in EKPO table showing same value with 2 decimals.
Thanks .
Regards,
Srinivasa Murthy

Error message when accessing iTunes Store: "iTunes could not connect to the iTunes Store. The network connection timed out. Make sure your network settings are correct and your network connection is active, then try again." Internet's fine! Please help!

Everytime I try to access the itTunes Store, this is the message I receive:
iTunes could not connect to the iTunes Store. The network connection timed out.
Make sure your network settings are correct and your network connection is active, then try again.
The internet connection is fine. I don't know how to fix this problem, and in the meantime I cannot connect at all to buy songs. Thanks for your help.

I feel you pain i'm haveing the same problems here.
iTunes could not connect to the iTunes Store. The
network connection timed out.
Make sure your network settings are correct and your network
connection is active, then try again.
does anyone plz have some insight for us.

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hi, did you upgrade the OS lately?
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php

Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.

Whenever I connect my 4th generation iPod thouch, all of the playlists on my iPod get deleted. This is very frustrating. Someone please help me? I searched the settings on iTunes and couldn't find anything.

Also, when I go on to safari, another alert pops up that safari cannot verify the identity of the website, anything that I type in to as common as google.com. It gives me 3 options to either cancel, look at details, and continue. I've looked at the details of the website of Google and it is legitimate the site. Any help?

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

I bought a film on iTunes and whenever I try and play it it says "your computer is not authorised to play this" and so i type my password in and it says "your computer is already authorised" and then doesn't play the film. Can anyone help?

I bought a film on iTunes and whenever I try and play it it says "your computer is not authorised to play this" and so I type my password in and it says "your computer is already authorised" and then doesn't play the film. Can anyone help?

ah this is a simple fix. open itunes go to store on the top menu bar and click store. scroll down and click
"Authorize this computer" fill in the info requested and there u have it.

How can I remove all my preferences and settings from mail and do a clean install of mail app?

How can I remove all my preferences and settings from mail and do a clean install of mail app?

Open mail > Preferences > Accounts
Select the account and click the minus button at the bottom of the column.
Quit mail
~/Library/Preferences/com.apple.mail.plist move this file to the trash and empty it.
~/Library/Mail/ and move all of the items in that folder to the trash and then empty it.

Authorisation settings in Q and P

Similar Messages

Maybe you are looking for