Authorization : Changes in role are not directly taken effect.

Authorization
After creating a role and assigning this to a BP the changes are not directly taken effect. Before logged into the system I runned the program: PFCG_TIME_DEPENDENCY.
Does any body know what the problem is? Does I need o run a program?
Any help is welcome.
Regards Hicham

see if it helps.
http://help.sap.com/saphelp_crm50/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm

Similar Messages

  • Portal Roles are not visible

    Hi,
    We have upgraged Portal (Nw 2004s) SP17 to SP18 ,But after upgradation portal roles are not visible for users and Portal adminstors (J2EE_ADMIN ) also.
    Standard roles like System ,user and Content Admin roles also not visible.It shows only blank screen after login to portal.
    It is critial issue .Please suggest how to solve this issue.
    Thanks
    Srikanth M

    Make sure there are no errors in the browser in the bottom left hand corner. Also, are you using a fully wualified name to access the portal? When you were on SP17 were you using standard roles or did you make your own copy of the roles and assign your users to the copied roles?
    If you navigate to the portal content studio directly, can you see the role contents?
    After launching /useradmin and authenticating, paste http://host:50000/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fadministrator!2fcontent_admin!2fcontent_admin_role!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content?sap-config-mode=true into your browser and you are in the content studio.

  • Roles are not found after client refresh

    Dear Friends,
    Yesterday night i had refreshed our 210 client by 220 client in same system by using SCCL Transaction code by logging into target system. I got message as client copy completed successfully. For that i choose profile SAP_CUST.(Because requirement is they need all customization data only).
    But after this activity i observe that all user present in system, but some roles are not fount which was present before.
    So users face authorization issue.
    So please help.
    What are post activity after client copy?
    Thanks,
    Regards,
    Sachin

    when you mean "the contact is still in the Address Book" you mean you can see in the list on the left hand side column? but you just cannot see it if you search for it via the search field. is that correct?
    i have had issues with syncing contacts added to my iphone, in these instances the contact or the info added to the existing contact would not flow through to the mac's AB. I solved this by doing a reset of the iphone in itunes and then syncing again, and from then on things started to work.
    also there is an option in itunes in the info pane that let's you select which group a contact is added to on the iphone, if indeed you have and use groups in AB, and of course which groups you would liked synced if you decide not to sync all contacts. you may want to check that these settings are correct and do not somehow screw up a contact added top iphone during the sync... just an idea.
    hop this helps

  • How to not display nodes in a tree if Oracle roles are NOT used?

    How to not display nodes in a tree if Oracle roles are NOT used?
    We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
    We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
    Since we don't use Oracle Roles how to do this in a tree?
    I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
    My tree query is like this:
    SELECT
         t.status, LEVEL, t.label, t.icon, t.node VALUE
    FROM
         tma_tree_menu t
    WHERE
    tma_authenticate_sys_chk_role(USER, t.node) = 1
    CONNECT BY
         PRIOR t.node = t.master
    START WITH
         t.MASTER IS NULL
    ORDER SIBLINGS BY
    t.position
    The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
    I tried the FTree functions in Forms but even that has nothing.
    Any help would be greatly appreciated.
    Edited by: Channa on Mar 17, 2010 6:49 AM

    Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
    and then how to condition it in UIX?

  • Roles are not updating in the GRC 10.0 System.

    Hi
    We had created Z role in ECC system and Ran the Sync Jobs in the GRC 10.0 System .
    But the role created in backend System(ECC) was not updating in the roles of the GRC system.
    Can any one provide right solution.
    Thanks

    Hi Wipro Basis Team
    On running the sync job what are you expecting to occur when you say the roles are not updating in GRC System? I wonder if you are expecting a different outcome to the purpose of the sync jobs.
    Regards
    Colleen

  • When I close CS6 changes in settings are not saved.  Reverts to default settings on reopen.  Why?

    When I close CS6 changes in settings are not saved.  Reverts to default settings on reopen.  Why?

    Sorry Photoshop --  Problems solved -- I read the details -- turns out you need to make changes with no files open for the preferences to apply to all files.
    Thanks,  Al

  • Changes to subtasks are not reflected in the summary task

    I use Project Professional 2013.
    Changes to subtasks are not reflected in the summary tasks. This includes both work and actual work as well as % complete. The tasks are all auto scheduled. Is there a setting that I need to change?

    The only way I know to make that happen is if calculate project after every edit is disabled (See Options, Schedule tab).
    Does this happen in all project files, for other PCs near you and do you have SP1 installed for Project 2013?
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Table changes in database are not captured in ODI model level

    Hi All,
    Can any one help me how to fix the bug in ODI.
    Table changes in database are not captured in ODI model level.
    Thanks in advance

    I created the interface which is running successfully.
    Now i did some changes in target table(data base level).
    I reversed the updated table in model section. Till here its ok
    The table which is updated in the model section is not automatically updated in the interface.
    I have to drop the existed datastore in the interface and and re do the entire process of bringing the updated datastore, mapping,etc..
    Please tell the any alternate way.
    Regards
    suresh

  • BW Roles are not updated in BOBJ system

    Hi All,
    We have created additional roles in BW system. But these roles are not updated in BOBJ system(BI 4.0). I am not able to see these roles in SAP Authentication when we update the user option too. Any solution for this?
    Regards,
    Krishna.K

    Thanks for the reply victor,
    Users are not yet assigned to these roles. But, it should display in the left hand side while importing?
    So, Is this because of no users in these roles?
    Regards,
    Krishna.K

  • Users are created but Roles are not Provisioned in the Target System

    Hi,
    It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
    In the provisioning job SetABAPRole&ProfileForUser,
    It is says In the Error putNextEntry failed storing
    Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
    MSKEY 58437
    Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
    Regards,
    Hakim

    Hello Nits,
    since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
    Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
    Regards,
    Steffi.

  • Some of the c function are not directly wrapped in to labview how can wrapping to labview

    hi here shambhu
                                  i have problem that some  c call i.e. MTL.dll can wrapped in to labview directly, some of the c function MTL.dll  are not directly wrapped in to labview .How can wrapping to labview.Please suggest me how to over come.Those global data sharing calls will be woking in labwindow cvi.
    Attachments:
    Template.vi ‏12 KB
    Template.uir ‏13 KB
    Template.c ‏8 KB

    After I posted this, this showed up as a suggestion:
    https://discussions.apple.com/message/17723048
    The "killall Dock" works, have to try the
    ~/Library/Preferences/com.apple.dock.plist
    Drag that plist file to the desktop.
    Reboot, and your problem should be fixed.
    later on

  • SRM Portal roles are not getting accessible

    Hello SDN contributors,
    I have a strange burning issue. Please help me out.
    Issue:
    When I assign any SRM Portal roles to users,roles are not getting accessible until I assign a custom ESS(HCM) role in the backend ECC system which is mapped with a portal ESS role.
    After doing this only from Portal front-end perspective ,SRM users are getting access on  SRM roles.
    But I do not able to find out the possible reason behind this.
    Please suggest me to get out of this issue.
    Regards,
    Sriram

    Hello Bala,
    First of all thank you for your response.
    Yes , I'm sure that the  back-end role is mapped to only ess role not to SRM roles.
    Unable to find out the origin for this issue. Please throw some valuable suggestions on this.
    Regards,
    Sri ram.

  • Abnormal DST changes if server is not in timezone effected

    we have some users in the timezone effected by abnormal DST
    http://support.microsoft.com/kb/2935092, our exchange servers are in Europe. question. should we update our exchange servers to know about this DST anomaly even though they are not in the effected timezone? tia

    Then could you share the detailed issue symptom with us? Please let us know:
    What is the issue our affected users experiencing?
    Does only Outlook for Mac have issue?
    Were all the Outlook for Mac affected?
    What about Outlook for Windows and OWA?
    If the issue just occur in Outlook for Mac, it could be client side issue, please check the client settings, including Outlook settings, system time and so on. About DST in Outlook or Mac, please refer to the posts here and see if they are
    helpful for you:
    Outlook 2011 Time Zone Issue
    Exchange 2010/Outlook 2011 woes
    Thanks,
    Jessie

  • Changes to a Role are not Reflected

    I have created a role with one BSP iView and assigned the role to a user.  When the user logs in he can see that iView.  Then I have added three more BSP iViews to the role.  But these new BSP iViews are not visible to the user.  The user had logged off and logged on again.  I have deleted the role assignment to the user and then reassigned.  Nothing is working.  Can someone tell me what could be the problem?  I will assign points to helpful posts.

    probablly you may not clear the cache, just clear the cache and check it out.
    to clear cache go to system administration -> navigation -> navigation cache.

  • RSSM: Checks Authorization Objects for Infoprovider are not activ

    Hello,
    we have BW 3.5 and we use RSSM Authorization Objects.
    When we create a new cube with an Infoobject that is authorization relevant, in our development-system in rssm the flags for the checks are automatically activ.
    When we transport the new cube to our production-system, the flags in RSSM for the authorization object are not activ.
    Sometimes the new infoprovider is not in the list of the infoprovider in rssm, so we have to "update check status" with the appropriate icon.
    My question:
    It is possible, that when we import the new cube in our production-system, that all authorization objects are activ??

    Hi,
    Normally system would check all the authorization relevant objects whenever a new Info cube is imported and in case if you want to transport these changes to Production system manually then follow the below listed steps:
    1) In Development system, check or un-check the authorization relevancy using the transaction RSSM on a given Info provider
    2) These changes are stored in table RSSTOBJDIR
    3) Create a manuall transport request and include these entries covering the required Authorization objects manually. 
    R3TR TABU RSSTOBJDIR
    Ex: If Info object 'A' is authorization relevant in Development system but not in Production system and you want to transport this change to Production system then include object 'A' table entries manually.
    Hope this helps.
    Cheers
    Bala Koppuravuri

Maybe you are looking for

  • APPCRASH - crw32.exe

    Hello, This might not be the first post about this issue but our version of Crystal Reports XI is very unstable. Many times the program crashes and gives the following error; Gebeurtenisnaam van probleem:    APPCRASH   Naam van de toepassing:    crw3

  • Mighty Mouse will scroll down but not up.

    All of a sudden my mighty mouse won't scroll up. It will scroll down, left and right but not up. The mighty mouse is about 6 months old and has worked fine on my old Dual 1GHz G4 MDD.

  • Exported in different language

    My exported file is in two different languages.  How do I get it to just be in English.  I made sure English was selected.

  • Using the LIKE operator

    How do I create a search parameter LIKE for a name?  I wrote this, and it's pulling in all the names, instead of only searching for whatever I entered in.  What did I do wrong?  Please help. {table.name_last} like ["*", {?Last Name}] Thank you, T

  • Installing Leopard via external dvd

    is there a way that Ieopard can be installed via an external dvd drive... My Imac 15 inch won't read the install dvd and I read somewhere that it's possible... Is there some truth to this? If so can someone give me instructions thanks