Authorization check when searching for transactions

Hi all,
We have a requirement to show only those activities for which a user is authorized. A custom authorization object has been maintained and the check in CRMD_ORDER has been extended accordingly. When opening an activity, the check is executed correctly, but when searching for activities, ALL activities are still shown, so the check is not performed at that particular moment. I have tested with standard authorization objects as well, but none of them are taken into account. Does anyone of you know how we can have the authorization check executed before or during the search, so that only those activities are shown, that the user may maintain as well.
Thanks in advance!
Regards,
Joost

Hello Joost,
Check if BADI CRM_ORDER_INDEX_BADI could not map your requirement.
Regards,
Frédéric

Similar Messages

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

Authorization check when creating shipment document

Dear Experts,
I have a shipment document type that is shared for all shipping point. I found that there are no shipping point checking when we select outbound deliveries. Can we add shipping point authorization check when we select delivery document?
Please advice.
Thanks.

If you want to use frameworks, I think the right model would be to place the methods in EJBs and then use security constraints and user roles and the like.
OTOH, Spring probably has something very similar without requiring EJBs. It will require the beans come from the Spring container however and not the JSF managed bean container.

Editor: Annoying pop-up for choosing main programs when searching for text

Hi,
We're upgrading to ECC60 and are getting frustrated when searching for text in a source code within the ABAP editor.
For every include contained in the main program you are searching in there is a pop-up asking to choose the main program for that include.
This can get crazy when searching in a standard SAP program such as SAPMV45A. You'll have to process through 30-40 of these pop-up windows before your search results appear. I each pop-up you have to scroll though dozens of main programs to find the one you are doing the search in.
Can this be turned of somehow to have the search functionality work as it did in previous version, where the Editor knows that the program you are launching the search from is the main program you want the results from?
Thanks,
Peter

HI Peter
Please check if program: <b>RPR_ABAP_SOURCE_SCAN</b> can help you...
Regards
Eswar

Is it just me, or is this NOT how the new iTunes store is supposed to look when searching for a song, TV show, or app?

Take a look...that's just weird! When searching movies it looks fine, but when searching for songs, TV shows, or apps, this is what you get. Notice all the DI6 and SF6? I mean I know iTunes 11 just came out and all, but THIS kind of surprised me. Wanted to see if I'm the only one seeing this or if others see it too.

Ok, Apple has fixed it now

Can't find my iweb domain file when searching for it in iweb seo tool

I am trying to get my iweb website recognized by Google. Can't seem to get the google html code to work in html snippet. So am now trying to use the iweb seo tool but can't find my iweb domain file when searching for it in iweb seo tool. My file is in user/library/applicationsupport/iweb/name.sites2
It shows in the folder but is not active, so I can't choose it.

The SEO ftp client is not what I'd recommend using. Once you add the metadata to a local copy of the files use a 3rd party ftp client like the free Cyberduck to upload the files. Much more reliable.
Google does not use keywords for it's searches although other search engines do. Create a test page on your site (leave it out of the navbar) and try adding Google Analytics to it with Wyodor's instructions. If you get it to work then all you need to do is copy and paste the HTML snippet from the test page into your site pages.
For information on visitors to your site you can also use StatCounter. It records the number of visitors and a lot more: where they are from, what browser used, which page visited and what site/page then came from for just a few. SC is easy to add to the pages as you get the code for your account, put it in an HTML snippet add the snippet to each page. Old Toad's Tutorial #13 - Adding a StatCounter as an HTML Snippet describes how to do it.
Again use a test page or a separate test site to work out the details before adding to your site pages.

Error when searching for entries in secure store

Hi All,
I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store".
Details of the Error is showing as:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
What is the reason for the above error and how to rectify it..?
Suggest some useful solution
Regards
Prakash

Hi All,
Can anyone suggest some ways to rectify the error, as i am not able to find solution for the error in the
forum.
Regards
Prakash

TS4147 contact address not visible although data is present when searched for

I'm trying to view address information on an existing contact record but it is not showing, When searched for, it returns the relevant record but the data is still not visible. All contact info has been reduced to just phone no, email and notes.Help!

Hi Vetsrini,
Many thanks for offering to help. It has just been solved. It was a typo in the XML of the name of the column.
Doh! Obvious now that I know!
- Jenny

Creating new selection criteria when searching for PR

Hi,
Need help. i want to add selection criteria when searching for a Purchase Requisition (PR).
Currently, when u go to ME52N/ME53N, and you click on 'Other Purchase Request' then you click on F4 the following option are only available when searching for some criteria of PR.
Purchase Requisition per Asset
Purchase Requisition per Requirement Tracking Number
Purchase Requisition per Services
Purchase Requisition per Purchasing Group
Purchase Requisition per Order
Purchase Requisition per Cost Center
Purchase Requisition per Material
Purchase Requisition per Network
Purchase Requisition per Project
Purchase Requisition per Sales Document
my intention to add option perhaps like :
Purchase Requisition per Requestor (the one who created the PR)
Purchase Requition per Short Text
How can i achieve this? Thanks in advance.
She

Hi ,
Goto OS52. Press F4.
Enter thedevelopment class as ME.
Select MBAN, then Enter .
Click on Included Search Helps.
You need add your search.
Explain your requirement to ABAP team . They will help u in updating the search help.
Regards
Ramesh Ch

On iOS 8.3 there is no keyboard shown when searching for contacts on Contacts tab

I've updated my iPhone 5C to 8.3 and now I can't use the keyboard when searching for a contact from the Phone app. Using the Contacts app the keyboards works well. No 3rd party keyboards were installed. Anybody else having this issue?
Cheers,
Tamas.

Okay, several reboots solved the problem

Short dump "Time limit exceeded" when searching for Business Transactions

Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
Bala

Hi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala

Error message when searching for an object link within EasyDMS

Hello,
I have a problem with the easydms system. Everything works fine except searching in the object links. When I want to define an object link and I don't know the name of the object I try to find it with the help of the search function within easydms (within the object links).
But the search always delivers an error message:
"Missing authorization check to display master data"
Does anybody now what to do?
Thank you for your help.
Best regards,
Markus Sigl

Hi Markus,
When you try to do this the BAPI 'BAPI_HELPVALUES_GET' is used. There are some authorization checks that are being performed for the object. These authorizations are maintained in the table BAPIF4T.
For the above said test data, you are trying to get the help values for
the relevant field (e.g. EBELN: po_number).However,in table BAPIF4T the corresponding authorization for the data element ebeln is not maintained. And so you are getting this error.
So, when you maintain the below record in the table BAPIF4T,you will
have the corresponding authorization and you will not get the error
anymore.
sample entry:
Object type - ' '
Object type component - ' '
BAPIF4T-DTEL - 'EBELN'
BAPIF4T-FNAM - 'PLM_HELPVALUES_AUTHCHECK'
Best regards,
Christoph

My group box is causing problems when searching for a text line in a text file.

I am developing a booking system, so for this I need to ensure that no two clients can book the same appointment slot. So, on testing my code which prevents double booking, the system doesn't seem to find the text line being searched for in the text file
when it (purposefully) should.
I have tried isolating the problem using breakpoints, and I've found that when the 'SearchLine' (referring to my code below) does not include the 'TimeComboBox.text' piece and instead this value is written into the code, the system is able to find the SearchLine
without any problems. But, when assigning the group box's value to a variable and using this in the SearchLine instead, or without even using a loop and just doing a simple line by line search, the program can't find this line of text in the file.
I'm lost for ideas. I have tried everything I can think of. Could anyone make any suggestions as for what is the problem with my group box? (I'll explain the code beneath it).
'Setting the value of the SearchLine (which is a String)
SearchLine = String.Concat(DateTimePicker1.Value.Date & " " & TimeComboBox.text)
Dim FoundApp As Boolean
Dim objReader As New System.IO.StreamReader(basicfilepath & "Text Files\Client Booked Appointment DatesTimes.txt")
FoundApp = False
'Reading the file's contents and checking for the SearchLine
Do While (objReader.Peek() <> -1) or (FoundApp = True)
If (TextLine = SearchLine) Then
'Line contains SearchLine. Appointment already exists.
FoundApp = True
Else
'Line doesn't contain SearchLine. Carry on searching.
Msgbox("Line not found.")
End if
Loop
Explanation
When the line is searched for, the 'FoundApp' value must be set to 'True' when it is found. If it is not found, it remains false.
To isolate the problem, I've displayed the SearchLine in a message box in the past to make sure that the correct line of text is being searched for.
In basic terms, my program is searching for the exact line of text which exists in the text file, but for some reason it is not coming up as 'Found'. The error occurs when the group box's value is used. The text file which is being read is
definitely correct. Please help, any suggestions would be appreciated.
Thank you

Hi
It would appear that your snippet doesn't actually read the file at all.
Here is my test which works fine.
Option Strict On
Option Infer Off
Option Explicit On
Public Class Form1
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles Me.Load
Dim SearchLine As String = "18:09:38 : XTaskSettings.Load PARAMS: begin"
Dim FoundApp As Boolean = False
Dim TextLine As String = Nothing
Dim objReader As New IO.StreamReader(Application.StartupPath & "\Data\Report Q1.txt")
FoundApp = False
Do While (objReader.Peek() <> -1) Or (FoundApp = True)
' this was missing
TextLine = objReader.ReadLine
If (TextLine = SearchLine) Then
'Line contains SearchLine. Appointment already exists.
FoundApp = True
MsgBox("Line found.")
Else
'Line doesn't contain SearchLine. Carry on searching.
MsgBox("Line not found.")
End If
Loop
End Sub
End Class
Regards Les, Livingston, Scotland

Authorization problem when using the Transaction Launcher

Hi All,
We have an authorization problem when we call a transaction (EL37) in ECC from the IC Web Client.
We believe that we have done all the necessary customizing in CRM and when we press the link in the Navigation Bar we are asked to logon to our ECC system. After logging on, we get an error message saying that "You do not have authorization for transaction EL37". If I then enter the transaction directly in the white command field in top of the ECC screen, then I have no problem calling the transaction.
My user has SAP_ALL, so it shouldn't be a problem with the authorizations. Maybe it has something to do with the transaction IC_LTXE? I have also tried to add this transaction to my user profile, but that didn't help.
Does anyone have a suggestion for how to fix this problem?
Kind Regards,
Gitte.

Hi,
I have found the solution for the problem myself. The transation code in the Transation Launcher Wizard must be written in capitals! We had entered 'el37' and have now changed it to 'EL37'.
Best Regards,
Gitte.

Lync 2013 Client crashes when searching for a specific user

We are using Lync client version 15.0.4569.1503
When typing "Singh" into the search field, Lync crashes with the error message:
Microsoft Lync has stopped working. Windows is checking for a solution to the problem.
This is happening for all users in the enterprise who search for Singh.
In Event Viewer, Application Error 1000 is logged:
Faulting application name: lync.exe, version: 15.0.4569.1503, time stamp: 0x52b0af33Faulting module name: Uc.dll, version: 15.0.4569.1503, time stamp: 0x52b0b5c4Exception code: 0xc0000005Fault offset: 0x00007c3aFaulting process id: 0x3dcFaulting application start time: 0x01cfa5ae6c1d6266Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exeFaulting module path: C:\Program Files (x86)\Microsoft Office\Office15\Uc.dllReport Id: aba6fa46-11a1-11e4-9f53-18037341ac8d
The WER file contains the following:
Version=1
EventType=APPCRASH
EventTime=130505075954941334
ReportType=2
Consent=1
UploadTime=130505075956121334
ReportIdentifier=135567f7-11a0-11e4-9f53-18037341ac8d
IntegratorReportIdentifier=135567f6-11a0-11e4-9f53-18037341ac8d
WOW64=1
Response.BucketId=106444627
Response.BucketTable=17
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=lync.exe
Sig[1].Name=Application Version
Sig[1].Value=15.0.4569.1503
Sig[2].Name=Application Timestamp
Sig[2].Value=52b0af33
Sig[3].Name=Fault Module Name
Sig[3].Value=Uc.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=15.0.4569.1503
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=52b0b5c4
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=00007c3a
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.4
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=2057
UI[2]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
UI[3]=Microsoft Lync has stopped working
UI[4]=Windows can check online for a solution to the problem and try to restart the program.
UI[5]=Check online for a solution and restart the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
LoadedModule[1]=C:\windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\windows\syswow64\kernel32.dll
LoadedModule[3]=C:\windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\windows\syswow64\ADVAPI32.dll
LoadedModule[5]=C:\windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\windows\SysWOW64\sechost.dll
LoadedModule[7]=C:\windows\syswow64\RPCRT4.dll
LoadedModule[8]=C:\windows\syswow64\SspiCli.dll
LoadedModule[9]=C:\windows\syswow64\CRYPTBASE.dll
LoadedModule[10]=C:\windows\syswow64\ole32.dll
LoadedModule[11]=C:\windows\syswow64\GDI32.dll
LoadedModule[12]=C:\windows\syswow64\USER32.dll
LoadedModule[13]=C:\windows\syswow64\LPK.dll
LoadedModule[14]=C:\windows\syswow64\USP10.dll
LoadedModule[15]=C:\windows\syswow64\OLEAUT32.dll
LoadedModule[16]=C:\windows\system32\MSVCR100.dll
LoadedModule[17]=C:\Program Files (x86)\Microsoft Office\Office15\LyncModelProxy.dll
LoadedModule[18]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModel.dll
LoadedModule[19]=C:\windows\system32\MSVCP100.dll
LoadedModule[20]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModelProxy.dll
LoadedModule[21]=C:\Program Files (x86)\Microsoft Office\Office15\LyncDesktopViewModel.dll
LoadedModule[22]=C:\windows\system32\MSIMG32.dll
LoadedModule[23]=C:\windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.18455_none_72d576ad8665e853\gdiplus.dll
LoadedModule[24]=C:\windows\system32\DWrite.dll
LoadedModule[25]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrAs.dll
LoadedModule[26]=C:\windows\system32\MSVCR110.dll
LoadedModule[27]=C:\Program Files (x86)\Microsoft Office\Office15\RtmPal.dll
LoadedModule[28]=C:\windows\system32\WINMM.dll
LoadedModule[29]=C:\windows\syswow64\WS2_32.dll
LoadedModule[30]=C:\windows\syswow64\NSI.dll
LoadedModule[31]=C:\windows\syswow64\PSAPI.DLL
LoadedModule[32]=C:\windows\system32\POWRPROF.dll
LoadedModule[33]=C:\windows\syswow64\SETUPAPI.dll
LoadedModule[34]=C:\windows\syswow64\CFGMGR32.dll
LoadedModule[35]=C:\windows\syswow64\DEVOBJ.dll
LoadedModule[36]=C:\windows\system32\pdh.dll
LoadedModule[37]=C:\windows\system32\MSVCP110.dll
LoadedModule[38]=C:\windows\system32\IPHLPAPI.DLL
LoadedModule[39]=C:\windows\system32\WINNSI.DLL
LoadedModule[40]=C:\Program Files (x86)\Microsoft Office\Office15\dbghelp.dll
LoadedModule[41]=C:\windows\system32\bcrypt.dll
LoadedModule[42]=C:\windows\system32\WTSAPI32.dll
LoadedModule[43]=C:\windows\system32\PROPSYS.dll
LoadedModule[44]=C:\Program Files (x86)\Microsoft Office\Office15\RtmCodecs.dll
LoadedModule[45]=C:\windows\system32\d3d11.dll
LoadedModule[46]=C:\windows\system32\dxgi.dll
LoadedModule[47]=C:\windows\system32\VERSION.dll
LoadedModule[48]=C:\windows\system32\dwmapi.dll
LoadedModule[49]=C:\windows\system32\d3d9.dll
LoadedModule[50]=C:\windows\system32\d3d8thk.dll
LoadedModule[51]=C:\windows\system32\dxva2.dll
LoadedModule[52]=C:\windows\syswow64\IMM32.dll
LoadedModule[53]=C:\windows\syswow64\MSCTF.dll
LoadedModule[54]=C:\windows\system32\UIAutomationCore.DLL
LoadedModule[55]=C:\windows\system32\OLEACC.dll
LoadedModule[56]=C:\Program Files (x86)\Common Files\Microsoft Shared\Office15\mso.dll
LoadedModule[57]=C:\windows\system32\d2d1.dll
LoadedModule[58]=C:\windows\system32\uxtheme.dll
LoadedModule[59]=C:\windows\system32\WINSTA.dll
LoadedModule[60]=C:\windows\syswow64\WINTRUST.dll
LoadedModule[61]=C:\windows\syswow64\CRYPT32.dll
LoadedModule[62]=C:\windows\syswow64\MSASN1.dll
LoadedModule[63]=C:\windows\syswow64\SHELL32.dll
LoadedModule[64]=C:\windows\syswow64\SHLWAPI.dll
LoadedModule[65]=C:\Program Files (x86)\Microsoft Office\Office15\Uc.dll
LoadedModule[66]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrCs.dll
LoadedModule[67]=C:\windows\system32\WINSPOOL.DRV
LoadedModule[68]=C:\windows\system32\HID.DLL
LoadedModule[69]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\Comctl32.dll
LoadedModule[70]=C:\windows\syswow64\CLBCatQ.DLL
LoadedModule[71]=C:\windows\system32\msi.dll
LoadedModule[72]=C:\Program Files (x86)\Microsoft Office\Office15\1033\lyncDesktopResources.dll
LoadedModule[73]=C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE15\adal.dll
LoadedModule[74]=C:\windows\system32\WINHTTP.dll
LoadedModule[75]=C:\windows\system32\webio.dll
LoadedModule[76]=C:\windows\syswow64\WININET.dll
LoadedModule[77]=C:\windows\syswow64\Normaliz.dll
LoadedModule[78]=C:\windows\syswow64\iertutil.dll
LoadedModule[79]=C:\windows\syswow64\urlmon.dll
LoadedModule[80]=C:\windows\system32\Secur32.dll
LoadedModule[81]=C:\windows\system32\DavClnt.DLL
LoadedModule[82]=C:\windows\system32\DAVHLPR.dll
LoadedModule[83]=C:\windows\System32\netprofm.dll
LoadedModule[84]=C:\windows\System32\nlaapi.dll
LoadedModule[85]=C:\windows\system32\CRYPTSP.dll
LoadedModule[86]=C:\windows\system32\rsaenh.dll
LoadedModule[87]=C:\windows\system32\RpcRtRemote.dll
LoadedModule[88]=C:\windows\System32\npmproxy.dll
LoadedModule[89]=C:\windows\system32\webservices.dll
LoadedModule[90]=C:\windows\system32\d3d10_1.dll
LoadedModule[91]=C:\windows\system32\d3d10_1core.dll
LoadedModule[92]=C:\windows\system32\D3D10Warp.dll
LoadedModule[93]=C:\windows\system32\dhcpcsvc6.DLL
LoadedModule[94]=C:\windows\system32\dhcpcsvc.DLL
LoadedModule[95]=C:\windows\system32\credssp.dll
LoadedModule[96]=C:\windows\system32\mswsock.dll
LoadedModule[97]=C:\windows\System32\wshtcpip.dll
LoadedModule[98]=C:\windows\System32\wship6.dll
LoadedModule[99]=C:\windows\system32\DNSAPI.dll
LoadedModule[100]=C:\windows\system32\rasadhlp.dll
LoadedModule[101]=C:\windows\System32\fwpuclnt.dll
LoadedModule[102]=C:\windows\SysWOW64\msv1_0.DLL
LoadedModule[103]=C:\windows\system32\cryptdll.dll
LoadedModule[104]=C:\windows\SysWOW64\schannel.dll
LoadedModule[105]=C:\windows\system32\ncrypt.dll
LoadedModule[106]=C:\windows\SysWOW64\bcryptprimitives.dll
LoadedModule[107]=C:\windows\system32\USERENV.dll
LoadedModule[108]=C:\windows\system32\profapi.dll
LoadedModule[109]=C:\windows\system32\GPAPI.dll
LoadedModule[110]=C:\Program Files (x86)\Common Files\Microsoft Shared\OfficeSoftwareProtectionPlatform\osppc.dll
LoadedModule[111]=C:\windows\system32\ntmarta.dll
LoadedModule[112]=C:\windows\syswow64\WLDAP32.dll
LoadedModule[113]=C:\Program Files (x86)\Microsoft Office\Office15\UccApi.dll
LoadedModule[114]=C:\Program Files (x86)\Microsoft Office\Office15\Win32MsgQueue.dll
LoadedModule[115]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\Comctl32.dll
LoadedModule[116]=C:\Program Files (x86)\Microsoft Office\Office15\1033\ocapires.dll
LoadedModule[117]=C:\Program Files (x86)\Microsoft Office\Office15\Psom.dll
LoadedModule[118]=C:\windows\System32\msxml6.dll
LoadedModule[119]=C:\Program Files (x86)\Microsoft Office\Office15\OcImport.DLL
LoadedModule[120]=C:\Program Files (x86)\Microsoft Office\Office15\ocrec.dll
LoadedModule[121]=C:\windows\system32\mlang.dll
LoadedModule[122]=C:\windows\system32\windowscodecs.dll
LoadedModule[123]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMediaManager.dll
LoadedModule[124]=C:\windows\system32\AVRT.DLL
LoadedModule[125]=C:\Program Files (x86)\Microsoft Office\Office15\AppSharingMediaProvider.dll
LoadedModule[126]=C:\Program Files (x86)\Microsoft Office\Office15\RTMPLTFM.dll
LoadedModule[127]=C:\windows\system32\wlanapi.dll
LoadedModule[128]=C:\windows\system32\wlanutil.dll
LoadedModule[129]=C:\windows\System32\MMDevApi.dll
LoadedModule[130]=C:\windows\system32\MFPlat.dll
LoadedModule[131]=C:\Windows\SysWOW64\devenum.dll
LoadedModule[132]=C:\windows\system32\msdmo.dll
LoadedModule[133]=C:\Program Files (x86)\Common Files\Intel\Media SDK\i2\3.0\mfx_mft_h264ve_32.dll
LoadedModule[134]=C:\windows\system32\EVR.dll
LoadedModule[135]=C:\windows\system32\MF.dll
LoadedModule[136]=C:\windows\system32\ATL.DLL
LoadedModule[137]=C:\windows\system32\ksuser.dll
LoadedModule[138]=C:\windows\system32\WinSATAPI.dll
LoadedModule[139]=C:\windows\system32\AUDIOSES.DLL
LoadedModule[140]=C:\Program Files (x86)\Microsoft Office\Office15\RdpQoEMetrics.dll
LoadedModule[141]=C:\windows\system32\XmlLite.dll
LoadedModule[142]=C:\windows\SysWOW64\SFC.DLL
LoadedModule[143]=C:\windows\system32\sfc_os.DLL
LoadedModule[144]=C:\windows\SysWOW64\SXS.DLL
LoadedModule[145]=C:\Program Files (x86)\Microsoft Office\Office15\sqmapi.dll
LoadedModule[146]=C:\Program Files (x86)\Microsoft Office\Office15\lynchtmlconvpxy.dll
LoadedModule[147]=C:\windows\system32\explorerframe.dll
LoadedModule[148]=C:\windows\system32\DUser.dll
LoadedModule[149]=C:\windows\system32\DUI70.dll
LoadedModule[150]=C:\Program Files (x86)\Common Files\Microsoft Shared\Office15\riched20.dll
LoadedModule[151]=C:\windows\system32\RASAPI32.dll
LoadedModule[152]=C:\windows\system32\rasman.dll
LoadedModule[153]=C:\windows\system32\rtutils.dll
LoadedModule[154]=C:\windows\system32\sensapi.dll
LoadedModule[155]=C:\windows\system32\apphelp.dll
LoadedModule[156]=C:\windows\system32\cryptnet.dll
LoadedModule[157]=C:\windows\SysWOW64\Kerberos.DLL
LoadedModule[158]=C:\windows\system32\LOGONCLI.DLL
LoadedModule[159]=C:\windows\system32\DSROLE.DLL
LoadedModule[160]=C:\windows\system32\NETUTILS.DLL
LoadedModule[161]=C:\windows\system32\NTDSAPI.DLL
LoadedModule[162]=C:\windows\system32\inetcomm.dll
LoadedModule[163]=C:\windows\system32\MSOERT2.dll
LoadedModule[164]=C:\windows\system32\inetres.dll
LoadedModule[165]=C:\windows\system32\igd10umd32.dll
LoadedModule[166]=C:\Users\b6600\AppData\Local\LogMeIn Rescue Applet\LMIR0001.tmp\rahook.dll
LoadedModule[167]=C:\windows\system32\wsock32.dll
LoadedModule[168]=C:\windows\system32\netapi32.dll
LoadedModule[169]=C:\windows\system32\srvcli.dll
LoadedModule[170]=C:\windows\system32\wkscli.dll
LoadedModule[171]=C:\windows\system32\BROWCLI.DLL
LoadedModule[172]=C:\windows\system32\DFSCLI.DLL
LoadedModule[173]=C:\windows\system32\SAMCLI.DLL
LoadedModule[174]=C:\windows\system32\SCHEDCLI.DLL
LoadedModule[175]=C:\windows\system32\snmpapi.dll
LoadedModule[176]=C:\windows\system32\inetmib1.dll
LoadedModule[177]=C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE15\MSPTLS.DLL
Sec[0].Key=LCID
Sec[0].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=Microsoft Lync
AppPath=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Thanks in advance,

If you update your client to the most recent version, does the issue reoccur?
How many Singh's do you have at your company? I'm curious if there's an active directory attribute that is returned with that user that the client really just doesn't like. Can you go into Active Directory Users and Computers, select View->Advanced
then manually find Singh (don't search) and go to the Attribute Editor tab. Do you see any attribute in there (not just Lync attributes) that seems to have any odd or escape characters?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Authorization check when searching for transactions

Similar Messages

Maybe you are looking for