Authorization Check while TECO PM ORDER

While performing action TECO of PM order, system check the authorization of Mtc. Plant of Equipment entered in the PM Order in place of Mts. plant authorization of PM Order it self. If during the period of PM order creation to TECO PM order the equipment moved from one Mtc. Plant to other it create problem. My requirment is that system should check the authorization of Mtc. Plant of PM Order copied from equipment while creation of order.

Sanjay,
Plant Maintenance is having authorization objects I_IWERK and I_SWERK which checks the maintenance planning plant and maintenance plant respectively with reference to T-Codes (For ex: IW32) which you can check for particular user and can make changes with this authorization object in user profile.
But first fo all I would like to clarify that in Plant Maintenance, whenever you are moving the equipment from one plant to another plant, it is always advisable to complete all the pending order and notifications prior to dismantling of the equipment and it is pratical too as it is obvious that maintenance team would complete all its pending work before shifting any equipment.
So I would guide that before shifting any equipment in SAP please complete all its orders and then dismantle and then re-install equipment to other plant.
Hope this helps.
Chin2.

Similar Messages

HR strutural Authorization check in the Lean order Interface (LORD)

Hi ,
We place Quotations , Orders in CRM 7.0 , via the Lean order Interface Screen (LORD) . So users in ECC have HR structural authorization and they seems to the checked ( for the HR# part of the Sales Team , and comming accross as partner function in the Quotations , Orders documents )
Can we avoid the HR structural Authorization check in the Lean order Interface ?

Dear Christophe,
I do not understand the requirement...you create ERP orders via CRM interface, and you have set up authorization in ERP for the users. Why do you want to prevent the authority check when coming from CRM when it is needed ?
However please consider note 1446253 quesiton 9.
You might activate or deactivate the "current user" flag in sm59 for your ERP system.
Hope this information helps...
Regards
Rene

How to avoid authorization checks while debugging

Hi,
Can anyone let me to know how to avoid authorization checks while debugging
for a standard transaction?
-B S B

Hello BSB,
To start the debug put /hs will start the system debug.
Then place the break points aat STATEMENT -- MESSAGE and F8
So now the system will stop at the point where it throwing the error message change the value of SY-SUBRC to 0 from 4.
Regards,
Vasanth

While TECO Maintenance Order Notification get closed

Hi Gurus,
For unplanned breakdown we create notification then order and porcess it and will close it. While TECO the order, notification get closed automatically. I don't want to close it automatically. Is there anyway to do it.
Thanks and Regards,
Babu R

There is no way to default this value
And this topic has been discussed many times before. Search the internet using CLNOT
[Here's|http://www.sapfans.com/forums/viewtopic.php?f=7&p=1040247] an old post.
PeteA

To release credit check while creating sales order

Hi,
I have a requirement of releasing credit check for list of open sales orders of a customer while creating a new order in VA01 for a customer.
E.g in va01,i'm creating sales order for kunnr ABC
for kunnr ABC, open sales order existing in database are 1,2,3,4
So i need to release credit check for 1 2 3 4 while creating a new sales order in VA01.
If i use FM 'SD_ORDER_CREDIT_RELEASE' in VA01 user exits it again call standard program and gives some error.
I need to know the exact point to implement the code if someone can help and also if there is another way of releasing credit check other than above FM.

Hello,
Why don't you use the include MV45AFZZ, userexit USEREXIT_SAVE_DOCUMENT_PREPARE.
You can write your code to identity all the sales orders that are due to be released for a customer and then release them.
Edited by: Kanwardeep Singh Gill on Apr 8, 2010 5:28 AM

Longer time for Material Availability check while creation of prd order.

Hi guys,
I am facing a weird problem while creating production orders thru CO01.
I enter the component and plant and I am also using the forward scheduling option.
for some reason, SAP is taking a long time for material availability check when I hit the release button.
Sometimes its taking more than an hour. Its happening with few specific BOM's, and I have checked the master data but I could hardly find a problem in master data.
Can someone suggest me some tips ??
Thanks & Regards,
Sashivardhan

Hi,
Please check the Availability check control maintained for Components it should be 01 or 02. Also check the issue storage location maintained or not. You can maintain issue storage location in BOM in Status/lng text tab in Production Storage Location.
Hope this will help.
Regards,
Navin

I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

I am trying to order a book with iphoto, I keep getting the same error message.
" A network error occurred while processing your order, please check your network connection and try again"
I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
I have ordered two books a few months ago without any problems.
Now I keep getting the same message either half way into
the order or at the final hurdle after the images have been uploaded.
Any ideas?
My shared Network has been fine and that does'nt seem an issue.
Help.

Try again in a couple of hours - sometimes it is a temp condition
LN

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

Credit Check while creation of Sales Order for Item Category Purchase Req

Hi Experts,
We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
The settings were same for all the Item categories.
1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
Thanks
Rajanikanth

Hi,
None of the Item Categories has Create PO Automatically.
Thanks
Rajanikanth

Authorization check creating Work Orders (IW31)

Hello everyone,
We need to make an authorization check when creating a Work Order in transaction IW31.
That check is based on the field "Main work center for maintenance tasks"
No check apart from the plant associated to the work center is done, but the problem is that there exist different Work Centers associated to the same plant, and we need to restrict it.
Our authorization model considers the Cost Center associated to the Work Center, but the Cost Center is not checked in this IW31 when entering the Work Center.
We have also tried using the classification system, but despite activating authorization obejct C_KLAH_BKL, is neither checked.
(It is amazing the difference between the number of objects marked to be checked in SU24 for this IW31 and the objects really checked when looking at authorizations trace)
We know that Work Center field exit could be used, but we would prefer not to change ABAP code.
Could you please give us a hint about how we can restrict this field?
Thank you very much.
Best regards.
Jose Sanz.

Hi Jose,
You can look at the object C_ARPL_WRK,
if you work with this , i hope you would be able to find a solution for this situation.
Thanks,
Vijay

I want to know about ATP check requirement .generally we assigned yes or no while creating sales order

I want to know about ATP check requirement .generally we assigned yes or no while creating sales order what it means when we give Yes or No. how pegging flows
Regards
virender

Virender,
Can you be a bit more specific about ".....generally we assigned yes or no while creating sales order....." Exactly what field(s) did you 'assign'? Screenshots would be helpful.
With respect to pegging; in general, ATP has very little to do with pegging. Pegging is more of a planning concept, and not an 'availability checking' concept. There are a few exceptions in APO, but they are not commonly implemented.
Can you elaborate about exactly what you want to know with respect to 'pegging' and ATP?
Best Regards,
DB49

Availability Check Screen while creating sales order

Hi
If I see the stock level in MMBE , I find enough stock for some materials .But when I create the sales order for those materials , system is taking to availability check screen .
I am going and saving the sales order and trying to create delivery for that sales order but system is giving error that u201Cno schedule lines due for upto selected dateu201D .
What could be the problem and Hoh I can fix it please .
Jaya

Hi Jaya
1. Enough stocks in MMBE means what?
Have you got enough stocks in unrestricted use
This needs to be checked
2. IN OVZ9 t code for your checking group of the material in MMR and checking rule A (sales order) there is a check box of include sales requirements
If that is ticked upon saving a sales order stocks are reserved for that order
Like that there might be some open orders existing for the item
You can see the list of such open orders in VA05N
Hence the system is taking you to availability check screen while creating order because there are not much stocks for this fresh order
You have saved that inspite of that
Hence there are no schedule lines in your order
Hence there is problem in delivery
Create the delivery on the scheduled dates given by the system in the schedule lines
Regards
Raja

How/ where to check output type while saving sales order for confirmation

Hi All,
Could you anyone pls let me know How/ where to check output type while saving sales order for confirmation.
Present scenario : when the Sales Order is created the Order confirmation is sent irrespective of credit block of the sales order.
Requirement : Order confirmation ZA00 sent to the partner only for those Sales orders which does not have credit block and ZCLE sent to the partner if the order has credit block.
Now i want to know where exactly to check the output types "ZA00" and 'ZCLE' based on the credit block to send the confirmation to partener.
Quick help highly appreciated......
Preetham

Hi Santosh,
Thanks for the info. But here in this case I have to send the confiramation based on credit limit check. If credit limit check exceeds "ZCLE' should go as confirmation else 'ZA00' should go as confirmation.
Where can we check the credit limit whether it exceeded or not. My doubt is whether it is config issue or do we need to write code user exit or routine to send the specific output type for confirmation.
Thanks & Regards,
Preetham

Authorization check for production order settlement

Hi All,
Production order settlement currently can be done by any user of any company code. there is a high risk involved in the same since unauthorized postings may happen. Hence we need to add authorization check for production order settlement. Can we maintain the same at the plant or the company code level?
Waiting for your replies. Thanks in advance!
Regards,
Aman Goel

hi
What venki has told abt the exit, its absolutely correct.Even i have used the same exit
     From table CAUFV pick Material(PLNBEZ),Basic Start Date(GLTRP),Plant(WERKS) .
     Pass parameter Material(PLNBEZ) and Plant(Werks) in table MBEW in respective fields i.e. Material(MATNR) and Plant(WERKS).
     Pick the latest record for the current period(LFMON) and year(LFGJA).
     Pick Product Cost Estimate number(KALN1) from the record and pass it to table KEKO.
     Check if Production Order Basic Start Date(GLTRP)<= BIDAT, if NO post Error Message.
This is the FS for EXit PPco0007
Reward if useful
Amit

Authorization check for Removing of Delivery block in Sales Order

Hi,
I want to have an authorization check for the person removing the delivery block in the Sales Order.
By Default all Sales Orders will have a delivery block. I want to ensure that the user does not have the authorization to Remove the Delivery block.He should be able to choose any reason in the Delivery block if required.
Only the user which has the authorization to remove the delivery block should be able to do so.
I have checked that the Delivery block field does not have an Auth Object.
I want to enable delivery block removal for some users and restrict the same for others.
Please Advise

Hi,
In object V_VBAK_AAT you can find the activity 43 that is meant for authorisation, that should be removed for the users who are not supposed to release the sales order for any blocks.
Try that it will work.
Regards,
Mann.

Authorization Check while TECO PM ORDER

Similar Messages

Maybe you are looking for