Authorization control to GSBER for FBL1N, FBL3N and FBL5N transactions

I have tried to take control of the authorizations to these reports through F_BKPF_GSB object, but I assign it to a user with authorizations to one GSBER and when I execute the reports the user is still able to see all the GSBER.
How can I limit for the user the view of its own division in FBL1N, FBL3N and FBL5N reports?
Thanks in advance.
Regards,
Erl

Hi Angel,
Please check the following path in SPRO transaction.
Financial Accounting(New) --> Accounts Receivables & Payable --> Customer Accounts --> Display Line items --> Define Additional fields for line item display
Once the field entries are added here it will reflect in FBL5N.
Good Luck,
Raghu

Similar Messages

Release Date of EM Grid Control 10.2 for HP-UX and Solaris?

Hello,
does anybody know the estimated release date of EM Grid Control 10.2 for HP-UX and Solaris?
Regards,
Martin

We are also very curious about that here. If anyone has any information or estimates it would be much appreciated.
We've ran into the following problem:
Note 338123.1 After Upgrading Catalog Database to 10.2 Cannot Use RMAN Catalog With 10.1 Grid Control
And have been told we have the following options:
Workarounds available:
1. Use dbcontrol for the 10.2 database to maintain the recovery catalog until 10.2 Grid Control is available
2. Use the RMAN command line utility
3. Use the 10.2 Management Agent when available.
Which basically means we are out of luck on OEM RMAN until 10.2, and hope to hear it may be available in the near future.

GL report including incoming check account (FBL3N and FBL5N) SAP E1P

Hi experts, I have a minor problem concerning some reports we are running daily in our business.
Today we run few GL -account reports using transaction FBL3N and then we have to run FBL5N
in customer level to get information from our incoming check account... (FBL3N does not accept
that account in line level)
Now we have a need to get these reports in to a one report... Using SE16 is out of the question because
our company security reasons
SO, does anyone know any kind of solution to get all general ledger account transactions from a certain day
to one report?
We are using SAP R/3 E1P...

Hi ,
You can write an ABAP Query T-code SQVI. and generate the reoprt as desired.
regards,
Shayam

How do I control storage location for iPhoto, iDVD and iMovie

My primary drive is getting full and I note that my User file has all of the iPhoto images, iDVD projects and iMovie projects. I want to take these collections off the main drive and place them on one of my external hard drives to open up space on my primary drive (the one with the Applications, etc.) How do I control where my images and movies are filed when I use the above applications? I do not recall designating any save function to this folder or drive. How can I save these files in a location on my external drives in tthe future? If I move these images and movies from my User file, will that cause a problem for iPhoto or iMovie or iDVD in finding the files in the future as I use these applications?

Hi
They are using three different concepts - VERY UNLIKE APPLE to do like this !
• iPhoto saves in a iPhoto library and there can be more than one - using the alt-key during up-start let's You to select which one You want to use and on Main Hard Disk at Root level in Photo folder.
• iDVD - Save an iDVD Project file (sort of folder) where You want to find it.
• iMovie - saves Event's and Project's in iMovie Event's resp Project's folders AND ONE MUST NOT alter or move anything in them or location of them - Moving Event's and Project's MUST BE DONE inside the iMovie Application !
So while one can move iMovie Event's and Project's to another Mac - the needed Photos (and audio from iTunes) will be missing and very hard to get iMovie on second Mac to find and recognice.
Yours (also confused - and moving step by step into the OLD FinalCut realm - Where everything makes SENSE !)
Bengt W

How to control the timeout for StreamSocket.ConnectAsync(), and StreamSocketListener.AcceptAsync()?

I can not file API to do this.Ray_ni

Hi Ray,
Here is a simple sample...
async void btnGetData_Click(object sender, RoutedEventArgs e)
// separated all this out so it is clearer:
//Create a socket
StreamSocket aSocket = new StreamSocket();
//Cancellation token is inspected to determine if the async method should be cancelled
CancellationTokenSource cts = new CancellationTokenSource();
//In this case, after 2 seconds... signal cancel
cts.CancelAfter(2000);
//get the operation
StreamSocketConnectOperation op = aSocket.ConnectAsync(new Windows.Networking.HostName("localhost"), "22112", SocketProtectionLevel.PlainSocket);
//Create a task and pass the cancellation token
Task aTask = op.StartAsTask(cts.Token);
try
//kick off the task and wait for a result!
await aTask;
catch(TaskCanceledException tcEx)
string a = "Task Cancelled: " + tcEx.Message;
catch(Exception theEx)
string b = "Exception: " + theEx.Message;
finally
string c = "done, still might have had an exception though";
Enjoy!
-Jeff
Jeff Sanders (MSFT)

Fields not getting updated in FBL3N and FBL5N

Hi
I have introduced new fields like material number, quantity sales document number, etc in through FBL3N --> Settings --> List special fields.
Also i added one more field in 'sort key' as sales document number. I updated sort key in customer master and GL master (i.e. reconcliation account of customer A/c)
But inspite of doing this, i can see those fields after change layout. But these fields are still empty. I do not know why its empty.
When i changed sort key to sales document number, sales delivery number is coming instead of sales document number in assignment field.
Please help

Dear Meenakshi,
Even though there are various fields available in FBL5N or FBL3N, all the fields are not updated for all the transactions. Based on transaction to transaction, fields get updated and mostly these are SAP standards. If you want certain fields, you need to develop Z reports accordingly.
For example when GR is posted, system does not update PO number in Purchase order field. But alternatively it is updated in REFKEY1 field. Similarly when billing is done, it does not update material code in FI tables so it does not appear in FBL5N.
Regarding Sort key, check with your SD consultant, what copy control it is used. In finance, assignment field is updated based on copy control used in SD.
Regards,
Niraj

FBL3n and FBL5n

Hello SAP Gurus'
I need your help. I am trying to understand which t-code to use for reporting. It appears that I cannot get both of them to equal because I think FBL5N only gives open and/or cleared balances however it seems that FBL3n gives a correct balance date within periods. Which is correct? If this is so, we should provide financials for A/R from FBL3n right?
URGENT Help needed.
Points awarded.
Thanks!

As i explained earlier:
FD10N is used to analyse the Customer Balances, period wise. It also has tabs to see the advance received,if any, from the customer. Actually,when you click on any of the balance on the period tab, it takes you to the FBL3N report.
FBL3N report is the detail line item analysis of the balances you see in the FD10N report. Also, you have the privilige to execute the report for open items only,cleared items only,open & cleared items together, etc within the date range. If you don't provide the date range, then the report will pull all the line items of that customer from the first invoice.
In FBL3N report, you could also execute the report to just see Special line items (Advance from customer),Notify items (Advance request for that customer) etc.
Hence, i hope, it clears your doubt about the usage of these two reports.

CONTROLLING AREA SETTINGS FOR COST CENTER

hi Sap Gurus,
plz help me how to configure CONTROLLING AREA SETTINGS FOR COST CENTER and COST CENTER ACCOUNTING with Transaction codes
If any one to send information abt configuration steps plz send to mail-id [email protected]
I hope my problem will be solved asap
Thanks
Vijay

I will send you the screen shot of the config settings.

BadIi / exits for PA20, PA30 and PA40

Can someone help me know BadIi / exits for PA20, PA30 and PA40 transaction.

Hi Megha..
                 Please refer this BADI ... HRPAD00INFTYDB this may fulfill your needs
Or try this..
Go to SE18 and search for the BADI names starting with HR*
There you'll see that HRBEN BADIs refer to benefits, HRHAP BADIs refer to appraisals, HRPAY BADIs refer to payroll.
For OM BADIs please search as RH*
For userexits there is a zprogram code I written below thru which u can find userexits for particular transaction codes..
*& Report ZFIND_USEREXIT
REPORT ZFIND_USEREXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                   AND OBJECT = 'PROG'
                   AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
      SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
      SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
      TFDIR-FUNCNAME.
      SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
                         AND OBJECT = 'FUGR'
                         AND OBJ_NAME EQ ENLFDIR-AREA.
      MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
                WHERE PGMID = 'R3TR'
                  AND OBJECT = 'SMOD'
                  AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
                                   TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
       20(20) P_TCODE,
       45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
           2 'Exit Name',
          21 SY-VLINE ,
          22 'Description',
          95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    LOOP AT JTAB.
      SELECT SINGLE * FROM MODSAPT
             WHERE SPRSL = SY-LANGU AND
                    NAME = JTAB-OBJ_NAME.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 SY-VLINE,
             2 JTAB-OBJ_NAME HOTSPOT ON,
            21 SY-VLINE ,
            22 MODSAPT-MODTEXT,
            95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE JTAB.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
This will surely help u.
Edited by: Jhings on Jan 29, 2011 11:35 AM

MD61 -Authorization control for Version , requirements type -reg

Hi,
We have an issue in providing MD61 -Create Planned Independent Requirements to the users
By standard authorization objects available , Plant level authorization control only is there
if we have to give authorization for many users in the same plant based on teh VERSION , REQUIREMENTS TYPE etc... is it not possible ?
can the authorizations objects be created manually for these and assign to teh concerned user's roles ?
please provide your thoughts
regards,
madhukiran.

Dear Madhu,
Authorization objects can be added for an individual T Code also in SU24.
Check with your Basis consultant,Also i think its possible to give the authorization for versions as well
as requirement type also.
Regards
Mangalraj.S

Authorization control for actual price calculation

Dear all,
I found that there is no authorization control for actual price calculation(KSII), this means user can calculate actual price for all cost centers, even this cost center belongs to other company. Is there a way to control this?
Thanks,
Ben

Hi Ben,
By SAP standard we do not have the control. we also have the same situation. We are venturing in to Realisation phase and we decided to have some kind of program (development) to control this.
Please let me know if you find some better solution
Best Regards
Surya

Please guide me for user authentication and authorization in WebDynPro App

Hi,
I just study the WebDynPro to develop the SAP Portal. I've ever developed the Web-based App using J2EE. So when i developed the Web-based App i have to develop the control of the user authentication and authorization on each page for example ,checking the session of the user whether they can access this page or whether session is expired or not,. So i have no idea with the WebDynPro and the SAP Portal because i never had experience for both WebDynPro and Portal.
I need to ask you some question to clarify my doubt :
1. SAP Portal is web page that include every enterprise application with in one page and user log-in to them just on time, isn't it?
2. If i integrate WebDynPro with SAP Portal, which one will do the authentication and authorization?. I mean that, Do i have to develop the code to check authentication and authorization in the WebDynPro App or Let the SAP Portal manage them?
3.Could you please suggest the best practice for authentication and authorization in webDynPro.
Many Thanks
Noppong J

in most case you don't have to write code to deal with session, authentication and authorization.
1. yes,
2. no, no code needed. you just set an attribute to your application, which make the the authentication required. when user access this page, portal will display the logon page
3 you can put some authorization related code in web dynpro for specific requirement, search this doc "Protecting Access to the Web Dynpro Car Rental Application Using UME Permissions"

Authorization control on material reservation creation and change (MB21 & M

Hi Friends
Please help me to find a solution on Authorization control on material reservation creation and change (MB21 & MB23).
Client looking for a control over end user on those T.Code s but not at T.Code level;
Client looking for control either based on "Storage location" and/or u201CProduct hierarchyu201D.
More specifically, user A and B both can Create/Change MR but user A only can do it for the MR which related to storage location say YY while B authorized for storage location ZZ
Thanks in advance.

Hello Partha,
Only available Standard SAP Authorization Objects, related to Reservations, are M_MRES_BWA (Reservations: Movement Type) & M_MRES_WWA (Reservations: Plant) where you can maintain authorizations based on Movement Type & Plant respectively and hence seggested enhancement.
You can use Tcode-SUIM to search for Basis authorization details i.e. Roles defined for specific transaction/authorization object / profiles.
Revert if any further info required.
Regards,
Anup

Authorization object for "set TECO" and "undo TECO"

We want to control the authorization for "set TECO" and "undo TECO",but we can't find relevant Authorization object. Is there any Authorization object for these two functions? If there's no Authorization object for them ,then how can we achieve the same result? Thank you very much!

Hi,
Under one user ID the auth object B_USERSTAT will have the authorization key in which user will be responsible to change the TECO user status.
One user will not have any authorization key under B_USERSTAT Auth_Object.
Hope it's will give you help.
Regards,
Vishal Kr. Sharma

Support for Proxied Authorization Control ?

Does OID support the Proxied Authorization Control
which in and extension of LDAP v3 spec? If not will
it ever, and if so - when?
Thanks,
Artur...

Not sure if it will work in your case but I am using the PixtoCam app which works very good for me.

Authorization control to GSBER for FBL1N, FBL3N and FBL5N transactions

Similar Messages

Maybe you are looking for