Authorization erro

Hi,
While executing process chain i am getting error as
"You do not have authorization for the DWB object" in Info package. i repeat this process manually and it gets successfull but then gets error out in DTP as
"You do not have authorization for the data transfer process"...repeat process does not wrk here.
where do i define authorization and who does it??
Thanks
Prashant

gave SAP_ALL authorization to ALEREMOTE user.
solved my issue

Similar Messages

Inutilização de NFe: Log de erro Message type 8 is not defined

Olá Pessoal,
Estamos com um erro aqui muito semelhante ao descrito na Thread: [Skip número da NF não autorizada|;.
Solicitamos a inutilização de uma nota writer de saída que foi barrada no Monitor GRC por erro de validação e por isso estava com status 8 na J1BNFE (ECC). A inutilização foi feita com sucesso, o status no GRC está correto, mas no ECC a autorização ainda não constava. Executamos o report XNFE/UPDATE_ERP_STATUS_DIAL e ao fazermos a msg de "erro ao atuzalizar ECC". No monitor da J1BNFE a nota agora aparece com o seguinte log de erro:
Message type 8 is not defined
Message no. J1B_NFE018
Diagnosis
The messaging system passed a value for the message type to the back-end system (field I_MSGTYP) that is not defined in the back-end system.
System Response
The back-end system cannot interpret and process the inbound message.
Procedure
Configure the messaging system in a way that it transfers only allowed message types to the back-end system via the inbound interfaces J_1B_NFE_XML_IN or J_1B_NFE_XML_IN_TAB.
Achei a thread mencionada acima com o mesmo erro e verifiquei a aplicação das notas, já que o problema foi solucionado com a aplicação das mesmas. Eis os status:
Nota 1298283 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1376324 (ECC) - Não relevante pois estamos no ECC 6.0 SP17;
Nota 1413636 (ECC) - Completely Implemented na SNOTE;
Nota 1376901 (GRC) - Não relevante pois estamos no GRC SP13.
Aparenmente alguma coisa ainda está faltando.. mas nao sei o que é.
Desde já agradeço,
Daniela Machado

Verifique esses passos da nota 1298283 (no ECC)::
Change Domain J_1BNFE_MESSAGE_TYPE
Use transaction SE11
Select Domain and insert name J_1BNFE_MESSAGE_TYPE
Push Change.
Select Tab "Value Range".
Insert
Fix value Short text
8 Authorization to Skip a NF-e with Validation Error
9 Rejection to Skip a NF-e with Validation Error
Maintain table J_1BNFE_MAP_TYPE
Use transaction SE16 and display the table entries.
Push CREATE (F5)
Insert records
MSGTYP DOCSTA SCSSAT
8 Space A
9 Space B
At.,
Bernardo Braga
Edited by: Bernardo Braga on Jul 1, 2010 10:06 PM

I can not authorize my computer with Adobe ID

When I try to authorize my computer with my Adobe ID, there is a erro happened, it said the activation sever can not be connected

Perhaps someone in the Adobe Digital Editions forum? (Adobe Reader has no connection, we don't have much of a clue). Adobe Digital Editions

RFC Lookup error :No RFC authorization for function module

Hi All,
I have created RFC in the PI system and enabled it as remote. I am working on PI7.1
I have imported RFC into Repository.But when i am trying to execute RFC lookup function in the graphical mapping I am getting No RFC authorization for function module error.
Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> com.sap.aii.mapping.api.StreamTransformationException: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> at com.sap.aii.mappingtool.flib7.RfcLookup.cacheMore(RfcLookup.java:95) at com.sap.aii.mappingtool.tf7.rt.AMultiResIterator$MultiOutIterator.gotoNextContext(AMultiResIterator.java:95) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:315) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:496) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.transformInternal(ExecuteXiMappingCommand.java:197) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.execute(ExecuteXiMappingCommand.java:94) at com.sap.aii.ib.server.mapping.exec.CommandManager.execute(CommandManager.java:43) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:40) at com.sap.aii.ibrep.server.mapping.MapServiceBean.execute(MapServiceBean.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1005_10002.execute(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351) at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62) at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37) at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53) at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304) Runtime exception when processing target-field mapping /ns0:MT_FileDummy/File; root message: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception>
13:42:37 End of test
Edited by: Rams on Apr 17, 2009 1:43 PM

Hi! Rams,
I think the issue is related to Authentification Issue..Even though u did correctly please check once the below
1) Check any Typo Erros are there while configuring or giving names in Lookups.
2) please check Authorizations like ID and PWD and Sufficient Roles
3) Also please check did u given paramters correctly while doing RFC look up I mean paramers , Binding parameters and RFC channel name and adapter type or Simple type it must be an adapter
4) In ID part while configuring Interface determinaition you need to give your RFC look Up name there also..Hence check whether u given or not if yes correctly or not
5) Also remember one thing if your scenario is correct mostly you can know the result in mapping itself it seems while testing Message mapping and Interface mappings give your RFC look up paramters in the parameters tab present in TEST tab and later in Document tab give Input...and execute it works if it doesn;t works and if there is an issue with RFC you can get there only..ok
Also go through the below document::
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457]
I hope this will give u brief idea...
Also check with basis while taking SAP_ALL authorization so that first u ill came to know whether issue is related to authentification or RFC module itself remote enabled and also do SXI_CACHE also ocne to refresh ESR and ID objects..
Regards::
Amar Srinivas Eli

Authorization Issue in Inventory Reports

Hi Experts,
My clinet is using SAP B1 8.8 PL11 and we are facing issue in inventory report, we have set proper authorization for the user, but when that user try to open any inventory report, it allow to select paratmeters for the report but when he click on ok button to generate reports system throw erro YOU are not permitted to performed this Action.
We have given full authorization to for all inventory reports.
Pls. tell me if i missed something in general authorization.
Regards
Kamlesh Vagal

Hi Kamlesh...........
One Module is Report where Inventory reports are there.
think your have given authorization to this module, But another Inventory module is there
where Invetory reports are there. I guess you have not given the permission for this Inventory Reports.
Give Authorizations to both modules and then see the effect.
Regards,
Rahul

You have no authorization for the requested data

Hi Gurus,
While trying to display data in manual layout it shows the erros as
You have no authorization for the requested data.
Any reason behind that.
Thanks,
Debasish

Hi Debasisha
I faced the same problem yesterday, as Ivan told apply the transaction code rssm. In Business Information Warehouse Authorizations window go to checks for InfoProvider and select your Cube and click the change button. in that window you can see the which infoobjects are selected under switched on column deselct the checkboxes for authorization obj. save - refresh
and go to BPS screen execute your layout you can find your layout. I solved my problem like that.
Hope it helps you.
Regards,

No Amount Authorization

Hi all,
In MIRO transaction when i makes an entry in the field basic data tab , system prompts me an erroe as" No Amount authorization for Vendor/Customer in company code 9000".
What does it mean.
Also how does the sytem comapre the values in MIRO transaction??
Means if In PO amount is 1000 and if vendor gives me an invoice of 1100 , where to enter 1100 in MIRO, as PO value will be taken from the reference document.
Please guide me on this.
Best Regards,
Deepika

Hi,
Please check the Tolerance Group for MIRO postings for your company code in :
SPRO-MM-Incoice verification-Authorization Management--Define Tolerance Groups
and check whether your userid is assigned with this tolerange groups in :
SPRO-MM-Incoice verification-Authorization Management--Assign User Tolerance Group
Hope this helps
Regards
Dheeraj

Cannot authorize with Adobe ID

When I try to authorize my computer with my Adobe ID, there is a erro happened, it said the activation sever can not be connected

Perhaps someone in the Adobe Digital Editions forum? (Adobe Reader has no connection, we don't have much of a clue). Adobe Digital Editions

Erro de conversão taxa de câmbio em BRL

Olá Grupo, bom dia.
Estou em projeto de migração 4.7 para 6.0, prem estou com erro na pricing do calculo do custo do frete (VI01), onde tenho uma condição que está apresentando a seguinte mensagem:
Condição ZTOG (erro de conversão taxa de câmbio em BRL)
Nº mensagem V1208
Diagnóstico
Na conversão da moeda ocorreu um erro.
As seguintes causas são possíveis:
não existe nenhuma conversão de moeda válida
a operação aritmética está errada
Procedimento
Verificar no customizing na etapa 'Definir fatores de conversão para a conversão da moeda' se existe uma taxa de câmbio válida de ZTOG para e complementá-la eventualmente.
Caso o usuário não possa efetuar esta atividade devido à autorização, deve informar a administração do sistema.
Esse erro impede que o calculo do item seja realizado completamente e isso está interferindo na transferencia para contabilidade do valor do custo do frete.
Alguem já passou por esse erro antes?
Agradeço pela atenção de todos.
Att.
Alécio Silva

Moçatto.
Consegui identificar o erro.
Na condição ZTOG a mesma estava definida como regra de calculo G - Formula, modifiquei para B - Montante Fixo pois já tem uma formula atribuida a pricing na condição que executa o calculo dos valores.
Efetuamos os teste dos processo e funcionaou corretamente.
Como está sendo migrado da versão 4.7 para 6.0 as configurações foram copiadas, mas após aplicação do pacote SAPKH60506 começou a apresentar o erro que informei.
Quero agradeçer pela resposta sobre minha duvida.
Obrigado.
Abs.
Alécio

Erro de SYSFAIL e Queda do Ambiente JAVA (PI)

Bom Dia
Estou num projeto de NFe e atualmente esta acontecendo o seguinte cenário de Erros:
    Na SMQ2 , quando apresenta um aumento nas filas de Mensagens , aparece SYSFAIL em determinadas Filas , todas as outras travam , aumenta o numero de Filas.
   Com essa mensagem de SYSFAIL nas filas , o serve0 (Parte JAVA do PI) cai e após isso estou tendo que efetuar manualmente um STOP/START em todos os canais de comunnicação para que os R/3 voltem a emitir NFe.
    Isso esta ocorrendo com mais frequência após inserir uma nova empresa para emissão de NFe.
    Alguem poderia me ajudar a entender por que ocorre o SYSFAIL as mensagens travam e derruba o ambiente JAVA ?
Sérgio.

1º) Erro: Commit Fault: com.sap.aii.af.rfc.afcommunication.RfcAFWException:SenderA
2º) Foi alterado o numero de Filas O numero de Filas foi alterado , mas não consigo ver esse parametros na RZ10 , tem 3 entradas : X32_DVEBMGS32_NFISAP ; DEFAULT ; START_DVEBMGS32_NFISAP nessa transação ...onde eu vejo isso
3º) Esse parametro não tem nessa transação (/usr/sap//DVEBMGS00/j2ee/cluster/server0/log/). em qual desses diretórios abaixo eu encontro esse parametro ?
Existe esses:
DIR_ATRA      /usr/sap/X32/DVEBMGS32/data
DIR_BINARY      /usr/sap/X32/DVEBMGS32/exe
DIR_CCMS      /usr/sap/ccms
DIR_CT_LOGGIN    /usr/sap/X32/SYS/global
DIR_CT_RUN              /usr/sap/X32/SYS/exe/run
DIR_DATA              /usr/sap/X32/DVEBMGS32/data
DIR_DBMS              /usr/sap/X32/SYS/SAPDB
DIR_EXECUTABLE /usr/sap/X32/DVEBMGS32/exe
DIR_EXE_ROOT     /usr/sap/X32/SYS/exe
DIR_GEN              /usr/sap/X32/SYS/gen/dbg
DIR_GEN_ROOT    /usr/sap/X32/SYS/gen
DIR_GLOBAL        /usr/sap/X32/SYS/global
DIR_GRAPH_EXE /usr/sap/X32/DVEBMGS32/exe
DIR_GRAPH_LIB   /usr/sap/X32/DVEBMGS32/exe
DIR_HOME             /usr/sap/X32/DVEBMGS32/work
DIR_INSTALL        /usr/sap/X32/SYS
DIR_INSTANCE     /usr/sap/X32/DVEBMGS32
DIR_LIBRARY      /usr/sap/X32/DVEBMGS32/exe
DIR_LOGGING     /usr/sap/X32/DVEBMGS32/log
DIR_MEMORY_INSPECTOR   /usr/sap/X32/DVEBMGS32/data
DIR_ORAHOME       /oracle/X32/102_64
DIR_PAGING                            /usr/sap/X32/DVEBMGS32/data
DIR_PUT                            /usr/sap/X32/put
DIR_PERF                            /usr/sap/tmp
DIR_PROFILE      /usr/sap/X32/SYS/profile
DIR_PROTOKOLLS     /usr/sap/X32/DVEBMGS32/log
DIR_REORG                          /usr/sap/X32/DVEBMGS32/data
DIR_ROLL                          /usr/sap/X32/DVEBMGS32/data
DIR_RSYN                            /usr/sap/X32/DVEBMGS32/exe
DIR_SAPHOSTAGENT     /usr/sap/hostctrl
DIR_SAPUSERS     ./
DIR_SETUPS                           /usr/sap/X32/SYS/profile
DIR_SORTTMP     /usr/sap/X32/DVEBMGS32/data
DIR_SOURCE     /usr/sap/X32/SYS/src
DIR_TEMP                           /tmp
DIR_TRANS                           /usr/sap/trans
DIR_TRFILES                          /usr/sap/trans
DIR_TRSUB                          /usr/sap/trans

Open and close posting period authorization control TCODE: S_ALR_87003642

HI All,
Is there any chance to control the user to open and close another company code posting period variant in TCODE: S_ALR_87003642.
In our system we are using the same client for different countries. So user can able to change the other country company code posting periods.
We would like to control either on the country (or) organizational unit(company code) (or) posting period variant so that user can only open/close their country / company code posting periods.
Our present authorization role for open and close posting period contain the auth.Obj. : S_TABU_DIS.
Please share your knowledge if you come across this problem..
Thanks in advance..

Hey Sandhya,
Congratz, this can be done using linbe item authorization with the object S_TABU_LIN.
Field ORG_CRIT - Value 02
Field ORG_FIeld1 - Value ZT001B
We have successfully done it in our client.
You need to contact your BASIS consultant for this.
Thanks,
Nitish

Analysis Authorization in BO 4.0 Webi report

Hi All,
I am using BO 4.0 and creating connection from Information Design tool to a BW query using BICS client. This connection is then published to CMC.
We are using SAP authentication and importing the roles from BW system. We have added profiles to this role and these profiles have Analysis Authorization set on Company Code. So one user can access data to one company code and vice versa. Now this works well in Bex Analyzer, but if I try to create a report in Webi, the analysis authorization fails. I went through the forum before posting this question and I found that is in 3.1 version and in most cases using SSO in universe connection solved the problem.
However in 4.0 I am using BICS client and followed the same processes to create a connection but for some reason it doesn't work ? Is this suppose to work differently in 4.0 ?
I have tried:
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
3. Publish the connection to CMC with my Enterprise and SAP ID and in both cases it doesn't work.
Please let me know if anyone encountered a similar issue and what is the best method to resolve this.
(BO 4.0 no service pack or fix pack installed on the system yet)
Thanks - Appreciate your help !
Prasad Rasam

Ingo,
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
>> Correct you need to setup you OLAP Connection with SSO.
>>> What I meant was I created the connections using both the methods, Using SSO it allows me to create a connection. The ID which I am using to create a connection has Admin access to BOBJ system. When I login as a regular user to create a Webi report and select this new connection, it throws an error message 'The DSL Service returned an error: com.businessobjects.dsl.services.workspace.impl.QueryViewAnalyzer$CannotGetCubeFromConnectionException: Cannot get the cube from the connection'
Using the other method to create a connection with User ID and password, I can create a connection and with the normal user login I can connect to the BW query but Analysis Authorization doesn't work.
Ingo : Could you be more specific what you mean here with the different users ? When you say "regular" user are you referring to an SAP credentials or SAP BusinessObjects Enteprrise credentials ?
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
>> The variable in the BEx query needs to be an authorization variable.
>>> This has already been set as Authorization variable. There is still a question here. If I select the variable as Authorization variable, I cannot set the other parameters in the query properties such as Mandatory variable (as this is greyed out).
Ingo : What other parameters would you like to configure ? Could you perhaps describe the scenario with more details ?
regards
Ingo Hilgefort

Analysis Authorization Issue 7.3

Hello Friends,
System BW 7.3, Currently there are 80 odd analysis authorization objects
We want to introduce a new info object (GL Account) to be authorization relevant, ( there are few objects in the system which are already authorization relevant in the system with proper analysis authorization objects and they are working fine)
Things done, made the GL Account object authorization relevant in RSA1, Created 2 analysis authorization objects with GL Account and TCT objects and one with hierarchy restrictions and one open access.
Added this object to the user in addition to its already existing authorization objects. Created authorization variable in BEx.
Some how the authorization is not picked up and it gives us all the values in the report. But if I add the GL Account info object to the existing analysis authorization objects then it works fine.
I do not want to change all the existing analysis authorization objects to add GL Account.
Your inputs are most welcome.
Thanks
Ed.

Gajesh- I have added the new analysis authorization object to the user in RSECadmin.
Subhendu- Problem statement: What are the steps involved in making a new info object(GL Account) authorization relevant. Authorizations are given at hierarchy level. Can we create a new analysis authorization with GL Account only or do we have to add it to every existing analysis authorization
I have done the following steps
1. Made the GL Account object authorization relevant in RSA1,
2. Created 2 new analysis authorization objects with GL Account ( with hierarchy restrictions) and TCT objects and one with GL Account open access.
3. Added this object ( which has restrictions) to the user in RSECADMIN, in addition to its already existing authorization objects.
4. Created authorization variable in BEx.
5. No existing analysis authorization objects have been changed.
When I test the report, It does not restrict based on the hierarchy that I have given, it gives open access.
But If I add GL Account with restrictions to the existing analysis authorization object, it works good.
Guess I am missing some thing here.
Do you need any other screen shots.
Thanks
Ed.

Analysis Authorization Issue

Hi:
I created an analysis authorization ZCO_CODE to trstrict it by a company code.
I added following objects in authorization with values.
0COMP_CODE = 1000
0TCAACTVT = 03
0TCAIFAREA = *
0TCAIPROV = *
0TCAVALID = *
Then I created a role Z:00:BW_REPORT, where I added following authorization objects S_RS_AUTH and restricted it by value ZCO_CODE. Then I assigned this role to a user test01.
When I execute a program RSEC_MIGRATION for this specific user, I do not see authorization object ZCO_CODE on 2nd step of this program. Any Idea Why? I think this object should show up as I want to migrate this specific object.
Help will be appreciated.

Hi Sachin:
Okay here is my issue.
I have a Reporting authorization Object created earlier which is ZCOCODE. I though I'll have to create a new Analysis authorization object e.g. ZCO_CODE and then restrict it with other chars. as mentioned in Marc Bernards presentation and then you have to migrate it.
In selection list I can see old Reporting authorization object. If I select it and use option "Enhance existing profile" then It will update profile and not role? right....
How can I see whether it has updated existing profile?????
Do I need to create new Analysis Auth. for Company code or I can use old Reporting authorization for company code?
For testing purpose, I created a test user and assigned all reporting roles but It will not show up in RSEC_MIGRATION step???

BW Analysis authorization issue on cost center range

Hello BIW security experts
I have a problem where I created an analysis authorization on a cost center range and it looks like the interval is not working. The report is just a list of cost centers (demo to users to prove that analysis authorizations work in order to skip 2 managerial cost centers.
. Cost centers are numeric. Example: 2000100. In the drop down list they appear as such.
. I want to have the following cost center range: 1000000 to 1000771, 1000773 to 2000771, 2000773 to 9999999.
Thereofore 1000772 and 2000772 should not appear in the list.
. In the analysis authorization I have put the 3 ranges above on 3 separate lines. 'BT' is the operator. The cost centers have been selected from the drop down list.
Results: I get only 1 record from the report.... 2000772. (which is one I want to exclude..
Steps tried to debug:
. When I put a list of cost centers in the analysis authorization on separate line with the 'EQ' operator, then the report works.
. I tried putting ' ' delimiters since cost center is a char field but it fails.
. I tried adding leading and trailing zeros to fill up the char(10) but no luck.
. I tried creating a hierarchy with the interval and put it in the hierachy auth. tab and it does not work either. It gives the same number of records than the first step.
. A hierarchy with single values work.
I do not know what else to try..
Thanks.
YB.

Good morning
Here it is from RSECVAL
ZCC_TEST     0COSTCENTER                    I       BT        1000000                                                      1000771
ZCC_TEST     0COSTCENTER                    I       BT        1000773                                                      2000771
ZCC_TEST     0COSTCENTER                    I       BT        2000773                                                      9999999
ZCC_TEST     0COSTCENTER                    I       EQ        #
ZCC_TEST     0COSTCENTER                    I       EQ        :
ZCC_TEST     0INFOPROV                         I       CP        *
ZCC_TEST     0TCAACTVT                        I       EQ        03
ZCC_TEST     0TCAIPROV                         I       CP        *
ZCC_TEST     0TCAKYFNM                       I       CP        *
Thank you for your help.

Authorization erro

Similar Messages

Maybe you are looking for