Authorization Error, querys works fine, views dont!!

scenario;
WAD buit on 3.5 with a table and graphic based on a Query View
Differents users has access to this, but they must review different slices of data controlled by the sales person (0PERSON), this are analysis authorization.
The role allows full access to SD infoarea, including querys, views and activities.
This model works perfect before a new support package was applied, then the users can execute querys but query views reports lack of authorization, as you may now trying to catch this over RSECADMIN its not possible since points to RSRT that cant check views, but if i add the S_RS_AUTH with 0BI_ALL the error its bypassed of course dosent solve the problem since gives auth to all.
SU53 also reports that the problem its about S_RS_AUTH.
BASIS let us know that the support package applied put new concept of authorization... but non that i recall about auth that differences between Querys and Views....
Any ideas where i should check???

You can switch on the Trace to find out what the error is.
Ask your basis team and they can switch on the trace and analyze it.
Regards,
Gaurav

Similar Messages

  • Wont print get error messages works fine on internet explorer

    Any time I want to print something it gives me an error message.This has happened for a while.Warning: Error in parsing value for 'filter'. Declaration dropped.
    Source File: https://support.mozilla.com/media/css/questions-min.css?build=2d0a4d1
    Line: 1Warning: Error in parsing value for 'display'. Declaration dropped.
    Source File: https://support.mozilla.com/en-US/questions/new?product=desktop&category=d6&search=wont+print+get+error+messages+works+fine+on+internet+explorer#ask-search-form
    Line: 0 just a few of the messages

    Try the '''''reset''''' described here: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer

  • WebAn: select filter value on 0plant gives error (but works fine for other)

    Hi all,
    have something strange in the web analyzer:
    i have a query with 0plant in the free characteristics
    when I do 'select filter value' when it's in the free characteristics -> dump
    when 0plant is in the rows and I do 'select filter value' -> dump
    when I do 'select filter value' on 0customer that is in the free characteristics -> works fine
    In the BEx Analyzer it works fine...
    Anybody an idea?
    Ciao
    Joke
    the strange world of BI...

    Hello,
    Is it a 7.0 system? maybe the RSTT trace as per note 899572 can give you more information about this error.
    Thanks,
    Ricardo

  • Why can't I upload pictures on some websites anymore? It just gives me an IO error, but works fine on Explorer.

    I used to be able to upload pictures on Wordpress and other websites just fine. Now all I get is an "IO error" message, but the same websites work fine with Microsoft Internet Explorer.

    Hi,
    This is an official representative of Viber Media.
    @AminahHz- Do you use 3G or WiFi?
    Please check that you have the latest Viber version.
    For more questions or technical support, please visit our official HelpDesk.
    Thanks,
    Viber Team

  • Safari gives error. Works fine when I open Web Inspector

    I am trying to open this page
    http://codecanyon.net/item/formcraft-premium-wordpress-form-builder/full_screen_ preview/5335056
    It opens half hidden.I get an error which has something to do with the iframe. However, if show the Web Inspector and refresh the page, it works fine.
    Is it something with my Safari? Is this how others see it as well?
    OSX 10.8.4
    Safari 6.0.5
    MacBook Retina Pro Early '13

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.

  • Authorization error when trying to view Infocube content

    Hi,
    I have created one Infocube and loaded the data.When I am trying to view the contents from manage screen,im getting the below mentioned error.
    Your user master record is not sufficiently maintained for object Auth Obj for  Personnel Area - 0PERS_AREA
    Message no. BRAIN805
    Diagnosis
    When checking your authorizations for object 'Auth Obj for  Personnel Area - 0PERS_AREA' (technical name: ZHR_0PERSA) it was established that you do not have authorization in your user master record for this object (return code 12).
    Procedure
    How you continue depends on the return code. See the online documentation for ABAP language element "AUTHORITY-CHECK". Please note:
    •     With a return code of 12, the object 'Auth Obj for  Personnel Area - 0PERS_AREA' has not been maintained in the user master, meaning there is no profile in the user master record in which this authorization object has been entered. This is, however, absolutely necessary, as all of the authorization objects created in the development class RSR are validated in the 'and' link. If the authorization is missing for only one object, the request is rejected as unauthorized.
    •     Get the person responsible for your authorization to create you a profile containing authorization for object Auth Obj for  Personnel Area - 0PERS_AREA.
    need help on this
    Thanks In Advance..

    Hi,
    First check in RSSM whether your InfoProvider is checked for authorization object 0PERS_AREA. Also determine whether do you need this authorization object ?If yes, then it should be checked otherwise check mark should be unchecked. If 0PERS_AREA is checked for your InfoProvider, then you should have some value in this object when you create the role. Either *  for all values or restricted value for it. Goto Pfcg select the role and add the authorization values for the 0PERS_AREAobject.
    GSM.

  • Is anyone else having the same authorization error when trying to view downloaded tv shows, etc. on apple tv?  I had the same problem a few weeks ago and was ultimately advised it was due to some sort of server error.

    A few weeks ago I had the same issue where items (tv shows) I purchased on itunes would not show using my apple tv on my main television.  It gives me an error stating I need to "authorize" the device/account etc.  There is no problem with the authorization it is correct; tv show plays on the computer.  The last time this happened the local apple store suggested I bring in my entire imac, hard drive, apple tv, etc.  This seemed crazy since I had been able to eliminate that there was a problem with my password, imac, etc.  I had also already tried all of the restore, reset, options to include restoring the apple tv, changing password and authorizing everything again.  Then I found out via an online discussion there were others having the same problem and it was due to some sort of server issue apple was having.  Is anyone else having this problem besides me again?

    I think I have the same problem.
    Apple TV 2. I can watch stuff I downloaded a while ago, but after I downloaded a season of a TV show on Friday night (Oct 28), I got the "Authorization Required" message. Ruined my Friday night trying to troubleshoot this, and found a bunch of posts on this forum about Apple's Servers being down can cause this. Since I'd done nothing different to my setup, I assumed that indeed "Apple's servers being down" was causing my grief.
    It's now Oct 31st, and I'm still getting the error on the newly-downloaded stuff. So either Apple's servers are having serious grief (and passing it on to me!) or else there might be something else after all.
    I've de-authorized and re-authorized my computer (I never thought for a second it would help because I can play "older stuff". Everything in my TV shows folder is bought from iTunes - i.e., it's all completely legit. We haven't even vacuumed behind the TV(!!) so we haven't disturbed anything... And the key info is that I can play stuff purchased prior to Oct 28th, but the stuff I purchased on Oct 28th hets the "Authorization required" message.
    Does anyone have any ideas?

  • FORMAT ERROR = 1 works fine in DEVand QA not in PROD

    Hi all,
    i have  a zreport when i double click on  one record it gives me printing option to print the form (smartform).
    it works in both QA and DEV. but not in PROD.
    if it is a format error it should also give the same error in both DEV and QA.
    why am i getting this errror only on PROD?
    Can i have some input pls...
    much appriciated for your work and thanks in advance.
    pasala.

    Hi Pasalabasker,
    I guess you have raised two issues here,
    1. To get the transport requests pertaining to smartforms I would add an additional way to the one selvakumar has suggested.
        Go to SE03 -> Search for Objects in Requests task->enter the object selection criteria as R3TR SSFO and further name of  your      smartform-> Execute. This will list all the transport requests pertaining to you smartform. Once you identify the request you can check its status in the quality and Prod.
    2.If your smartform versions are same, To identify the format error please check this alternative.
    ===>In  you production server, debug at the point of call of you smartform.Note down the Internal Table/Workarea values been passed during the smartform call . 
    ===> Open the smartform-> get the corresponding function module name of the smartform generated automatically(Under Environment->Function module name).
    ===> Now simulate the same scenario in se37 for the  the function module and the table values.
    ==> The format errors (if any) will be more descriptive when you execute the function module through se37.Most probably the location of the error node in the smartform hierarchy will be mentioned in this error.
    This method has helped me many a times.Hope this helps you too.

  • GIF in Reports gives error. Works fine for JPEG

    All this time the company logo in all our reports was a small GIF file. However, we created a new App Server and tried to run the report, but it gave an error. When we open the report in Reports Builder, change the GIF to a JPEG file it works.
    -- What could be the issue?
    -- Is there a para in the App Server where image type is specified?
    App Server is 10g R2. Reports were also compiled in 10g R2.
    Error is:
    Terminated with error: <br>REP-536870981: Internal error REP-62204:
    Internal error writing the image BandCombine: a row of the matrix does
    not have the correct number of entries, should be
    OpImage.getExpandedNumBands(source0.getSampleModel(),
    source0.getColorModel()) + 1.. REP-0069: Internal error REP-50125:
    Caught exception: java.lang.NullPointerException REP-0002: Unable to
    retrieve a string from the Report Builder message file. REP-536870981
    Edited by: Channa on Jul 23, 2010 2:06 AM
    Edited by: Channa on Jul 23, 2010 2:13 AM

    Hi,
    use OUTPUTIMAGEFORMAT=GIF as parameter when generating the report.
    See also http://download.oracle.com/docs/cd/E12839_01/bi.1111/b32121/pbr_cla007.htm
    Regards

  • 'No authorization' error for selection values outside the authorized range

    Hi All,
    We are currently trying to use the authorization analysis concept for 'Cost center reporting'.
    We have made 0COSTCENTER info-object as authorization relevant and have created a analysis authorization object for it through RSECADMIN and we have maintained a single value as '1875' . We have assigned this object to 1 of the test users.
    So now if the user runs the report for cost center '1875' , he is able to view the data/report. Now if he enters any other cost center apart from '1875' than he gets an authorization error (Everything works as per requirement till this point).
    But now if the user enters multiple cost centers like 1875, 1876, 1877 as multiple single values and runs the report, he gets an 'No authorization error'.
    So all the experts, please let me know if it's possible in anyway for the user to see the result/report for the value he is authorized to (in this case - 1875) and should give an information/warning/error message saying that he is not authorized to other cost center (in this case - 1876, 1877).
    Same thing is occuring if user enters a range. Suppose a user is authorized for cost center - 1875 to 1880. Now if he puts multiple single values or range in between the authorized range than he can see the result but if he enters even 1 single value outside the range he gets an error - what I mean by this is - if the user enter a range from 1875 to 1801, he does not get any data display but instead he recieves an error message saying 'No authorization' even though he is authorized for all the cost centers in that range except 1801.
    I would really appreciate your help regarding this. Any comments/suggestions are very welcome.
    Thanks & regards,
    Sunny

    Hi Sunny
    That is the way analysis authorizations work!!
    If you ask for a number of values i.e. cost centers and you don't have authorization to *all* of them you will get a system error as you say.
    There is no way of partially evaluating the query as you suggest (only for the authorized values).
    Try to be less restrictive when defining characteristic values in RSECADMIN.
    In queries use variables with
    Processing by Authorization and Input Ready.
    So the system will tell the user which are the allowed values. In your example the system suggests the range 1875-1880.
    Hope this helps, regards
    Germá

  • Importing apple loops -why do some in a folder work and some dont?

    im trying to drag and drop all my sample cds i have on my external drives into the apple loop browser in logic, some are folders in folders in folders as most cds are..why is it that when i drag the whole sample cd folder and drag it in that quite often just a few of the loops are installed in the window?..ive even tried dragging single files ,,they just seem to disapear although if i try to re-drag folders or files, im told they are already there?..i have some that have worked fine others dont even appear in the menu even tho if i try again it says they are there?..im keen to use the browser for audiotning sounds even if theyre not tagged ..anyone?..this is sooooo frustrating..many thanks in advance.,..T

    you can search for this problem using google to see if any solutions work for you.  but i found this post by urami (who is very knowledgeable):
    It has nothing to do with font name itself. Also, by the way, font being a system component, can't be easily renamed in NotePad. You will need dedicated font editing tool like Macromedia's Fontographer. Anyway, Flash simply does not support some fonts and font's families. Unlike Other tools you brought up, Flash is vector based and not catered to handle all kind of fonts, but specific groups only. In fact if you deal with more applications, you will realize that it's a common issue. CorelDraw supports literally any font, half of which won't never shop up in Photoshop, then these that show up in photoshop, half of it won't show up in Flash, and so on. You just can't use all the fonts and it won't matter whatever you change their names. It's all about the font and its outlines and the way it is made.  --  Best Regards  Urami  --  "Never play Leap-Frog with a Unicorn."   If you want to mail me - DO NOT LAUGH AT MY ADDRESS

  • Post Moved Strange-wifi-problem-laptops-work-fine...

    MOVED http://community.bt.com/t5/Other-BB-Queries/Strange-wifi-problem-laptops-work-fine-phones-dont/td-p/...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Have never heard of that problem before so can only give you an idea of some things to check.
    Check in the Homehub management that it is not set to block access to the mobile devices. If you did a factory reset of the hub then it should have cleared any settings but it might be worth checking.
    Have you checked that they are connecting to your Homehub and not to BTWifi which would require further log on to get internet access.
    What exactly is happening with the devices when you try to connect to the internet. Is it all things to do with the internet or can you connect by 3g?
    Have you tried to connect using another router such as at a friends house?  

  • Ryanair 'flights' dialog box does not load; all the rest works, and in Opera it works; can you help? it seems everything else works fine

    Ryanair 'flights' dialog box does not load; I tried in other languages too, it is the same error; it works fine with opera browser in this very same computer I am writing in; please help, if you can; it worked up to two months ago, then I don't know, too long has past from last time I used ryanair, and the rest works all fine, it seems... thanks so much for your time,

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
    <br />
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")<br />

  • Workbook works fine in discoverer plus but shows error in discoverer viewer

    Hi,
    I have some issues with the parameter of a report.
    one of the parameters is
    mgr_id (eg: 1,2,3) -- from database table.
    manager names are not available in the database but they are known to users like
    1 - david
    2 - alan chris
    3 - peter
    so the requirement is
    (i) the input parameter wud be entered as 1 or 2 or 3 or null ( or in multiple combination or all).
    But the report shud have parameters in the header of the report.
    for eg: if the input parameter is mgr_id = '1' then the report shud have manager name: 'david' in the header.
    if the input is mgr_id = '1',' 2', '3' then on the report header, it shud display as manager name: 'david','alan chris','peter'
    (ii) the default value of mgr_id shud be 'ALL'. if the user enters mgr_id as 'ALL' then it shud take all the values of mgr_id and pull all the values of mgr_id (like 1,2,3)
    and the report header shud display as department name: 'ALL'
    i have developed a custom query where i used,
    select dept_id, decode(mgr.mgr_id,'1','david','2','alan chris','3','peter') as mgr_name, ..... etc.
    in discoverer admin,
    I have created LOVs (item classes) for mgr_name.
    after that going to properties of mgr_name, i have selected mgr_id as indexed item.
    and in the report i have created parameter dept based on mgr_name and selected the option -- allow to select both indexes and values.
    and in the default value i mentioned 'ALL'.
    after that i changed the condition as
    ((mgr_name = :manager name) OR (mgr_name LIKE DECODE(:manager name,'ALL','%')))
    and in the header, i used &department name --- then it displays correctly.
    but the problem is ---
    the report works fine in plus. the problem is only when parameter value is 'ALL'
    when i run the report from discoverer viewer for the very first time (after logging in), the report works fine with correct data.
    but when i run the same report second time with parameter value 'ALL', it gives an error ---
    Invalid value "''" for parameter "department name"
    i dont understand, why it works for first time and doesn't afterwards. If i logout and login again, it works fine in viewer.
    am i doing anything wrong in conditions or declaring the parameters?
    I came to know that, the very first time, when we enter 'ALL' it is taking '%' but when we run for the second time, it is taking NULL. since NULL isn't there in mgr_id or mgr_name, it is throwing that error.
    How do i fix this error?
    Thanks

    Hi Puppethead,
    I have tried with your suggestions.
    the following condition -- did not work
    ( (mgr_name = :manager name)
    OR (mgr_name LIKE DECODE(:manager name, 'ALL', '%', NULL)))
    but for the other condition ---
    ( (mgr_name = :manager name)
    OR (mgr_name LIKE DECODE(nvl(:manager name, 'ALL'), 'ALL', '%', NULL)))
    is wrong because, :manager name cud be null, when it is null, it takes 'ALL' i.e. '%' which shud not be the case.
    if the user enters null, it has to display records with null only but with the above condition it takes '%'
    The main issue which i dont understand is, the report works fine for the first time. for the second time, the report takes null values . why is it taking null values for the second time.
    Thanks

  • BI Publisher 11g Trial dont work fine , send ERROR

    Hi.
    I Install BI PUblisher 11G Trial in a new clean server with :
    + Windows 2008 R2 Foundation Spanish with SP 1
    + Download, Install BI Publisher 11g Trial
    + Execute Demo Report "Revenue Budget Actual and Detail "
    + In Inteactive mode work fine
    + In HTML send ERROR : "java.lang.ArrayIndexOutOfBoundsException: 0"
    + In PDF the pivot table don't display any value higer 1.000.000
    This is a bug ?,how correct this errors ?
    Thank you very much
    Carlos

    Hi Carlos,
    Are you still experiencing this problem?
    I do not see this on my installation on Windows7 64 bit running in English.
    I also set the BI Publisher UI language and Report Locale to Spanish and all three output types:
    Interactive, HTML and PDF render correctly.
    When you say that the pivot table doesn't show any values higher than 1.000.000 ... what does it show instead?
    How do the other sample reports look for you?
    Mike
    Edited by: mdonohue on Jun 5, 2012 4:45 PM

Maybe you are looking for