Authorization Error using CozyRoc SSIS+

Using Sharepoint Connection (CozyRoc SSIS+ 1.6 ), getting the following error:
"The request failed with HTTP status 401: Unauthorized.".
The 'Test Connection' runs succesfully, but the package execution fails. Also, using the SPCRED connection manager, everything runs fine. However, our QA & Prod servers only have licenses for CozyRoc. Any ideas?

It must be a security issue.
Besides, CozyRoc support people will be your best bet to go to. Use their support if you are a paying customer.
Arthur
MyBlog
Twitter

Similar Messages

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

E-Recruiting - SLIN Error "insufficient authorization to use objects'

Hi,
When I do the Extended Syntax Checks (SLIN), got below error message. Should i neglect it or ?
u201C Program: ZHRRCF_CON_CAN_CREATE Include: ZHRRCF_CON_CAN_CREATE_FORM Row: 169 [Prio 2]
Object PROG ZHRRCF_CON_CAN_CREATE has insufficient authorization to use objects
CLAS CL_HRRCF_CANDIDATE_ADMIN_BL from package PAOC_RCF_BL
ZHRRCF_CON_CAN_CREATE in package ZHR_EREC_FE
CL_HRRCF_CANDIDATE_ADMIN_BL in package PAOC_RCF_BL
The used object, CLAS CL_HRRCF_CANDIDATE_ADMIN_BL, is not visible
(The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
EXTENDED CHECK OFF/ON)u201D
...Naddy

Your application and development work, right?
The check you do is more or less a warning, that the PAOC_RCF_BL package is not visible, within your package.
If your application works, ignore it.

Authorization Error on Peoplesoft Login Page

Hi, this is related to the previous project we are still working on.
Invoking a Java Method from Peoplecode
While we have found that our approach have been successful in Dev and Test Environments, once we migrated the changes to Production, it seem to have stoppped working. Our client wants to test the link from Test Environment and would Single Sign On to the Production environment. But we are getting this eror, Authorization Error -- Contact your Security Administrator on the Peoplesoft login page when the link is clicked from the Third Party website.
The node setup for Dev, Test and Prod environments under Node Definitions are using PSFT_CR as the default local node and are all working when ping'ed. The defaut user that is used for allowing public access in the Web Profile are setup'ed just the same in all three environments, and application/web servers have been restarted as well.
One thing we noticed is that the url of the third party website is http and the url for the PS prod is https. Could this be the one causing the error, or have we missed something on the setup.
Again, we appreciate your insights regarding this.
Edited by: Jeremy Leung on Jul 9, 2012 11:50 PM

Hello,
Have you tried the steps suggested by
Imtiaz Hussain in the
previous thread you queried ?
Is the error the same that you were previously encountering ?
Regards,
Neelesh.

Authorization error when exporting business system

Hi ,
I am on XI 7.0 spo9.I am trying to transport from dev to qa .
I am able to easily export (login using xisuper ) Technical system.
However while exporting Business system .when it gives me to download a file I get an authorization error .
Kindly help

Hi,
Check XISUPER has the below roles in SU01.
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_ORGANIZER
SAP_SLD_GUEST
add the above roles for XISUPER and get the green color those roles using Tcode : PFCG.
The above roles should be in green color.
Regards,
Venu.

No Authorization error in executing a planning sequence

Hi,
We are using BI 7.0 Integrated Planning.
We have implemented Mark Bernaud's file upload solution. We have used a planning sequence that uploads the file and stores it in a cube. Using it, we are able to upload files without any problem when executing with a SAP User Id which has all the authorizations (the user id has SAP_ALL specified in its list of profiles). Now, we have a requirement where we need to execute the file upload using a user id which has limited authorizations. When we are trying to execute the file upload with the userid that has limited authorizations, we are getting the following authorization error.
'You are not authorized to execute sequence PL_SEQ_FL_UPLOAD'
where PL_SEQ_FL_UPLOAD is the name of planning sequence we are using. We have also included the authorization variable in the filters being used as suggested in one of the blogs but this didn't help.
Could anyone please let us know the authorization objects to be added to the user id to enable access to this file upload.
Many Thanks,
Narendra.

Thank you very much Diogo,
The objects you suggested were already there. We have successfully traced the error by switching on the trace using ST01. We found the reason for the error to be that display authorization is not provided for S_RS_PLSQ whereas execute authorization is already present for that.
Once again thanks Diogo.
Many Thanks,
Narendra

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Error while executing SSIS package which contains Script component through SQL Server Agent Job

Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.    Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94     Code: 0xC0047062     Source: Insert TLM Headers Script Component [205]     Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.    Server stack trace:      at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)     at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e)    at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer)     at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94     Code: 0xC0047022     Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankaj

domain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter

Authorization Error while executing Workbooks,

Dear ALL
We have authorization in place where users are restricted to execute Workbooks PLANT wise.
For this 0PLANT is kept authorization relevant.
0PLANT__0COMP_CODE is Navigational Attribute of 0PLANT also marked as authorization relevant.
Till now all user were assigned the Analysis authorization A_PLNT_XX as 0PLANT = XX
But suddenly now the users are getting authorization error of NOT BEING AUTHORIZED .,
The error log is as shown below.
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider ZMMIMMP05:
0PLANT
0PLANT__0COMP_CODE
0TCAACTVT
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
Check Added for Aggregation Authorization:     0PLANT__0COMP_CODE
Authorizations missing for aggregation (":")
Characteristic 1
0PLANT__0COMP_CODE    Empty
Entries marked with red do not have aggregation authorization
You can find more information about this here 1140831
The authorization check stops here as this selection is no longer needed
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
51 ( 0PLANT )
Authorization Check Complete
Please let me know the reason for the same.
Also How can i track these changes to avoid such errors
Regards,
Ajit

Hi Ajit,
The authorization log has been improved constantly and try to make it easy to understand.
It says:
Authorizations missing for aggregation (":")
Characteristic 1
0PLANT__0COMP_CODE Empty
Entries marked with red do not have aggregation authorization
You can find more information about this here 1140831
So please click the "1140831" which is a hyperlink bringing you to OSS note 1140831.
The note says:
1140831 Colon authorization during query execution
Part 1: Description of the authorization check
You require aggregation authorization ("colon authorization") to view
the values of an authorization-relevant characteristic in aggregated
form. What does this mean exactly?
Example:
The calendar year (0CALYEAR) characteristic is authorization-relevant
and is contained in the InfoProvider that is in use. You defined a query
as follows:
1. 0CALYEAR is in the free characteristics (not in the drilldown)
    without any selections
- or -
2. 0CALYEAR does not exist in the query at all.
In both cases, no 0CALYEAR values are displayed in the query. Also, the
query is not restricted to any 0CALYEAR values. A colon is required for
the authorization check in this situation.
The note contains some more detailed explanation. You could read through it to understand the concept.
Regards,
Patricia

Authorization error while regestring developer in SSCRkeys

Hi All,
iam trying to register developer in SSCR keys to generate acess key .
iam getting authorization error
How to Register SSCR keys authorization.
pls help me out ....
solutons appreciated
John

Hi juan,
iam getting Authorization Error!
Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
do i need to register for sscr authorization.
solution appreciated
Regards
John

"Authorization error" while accessing Multiprovider in Analysis for excel tool

Hi,
We are using "Analysis for excel" 1.4 version. My users are executing all queries out of any MP with out any issue. But while accessing Multi Provider in "Analysis for excel" tool they are geeting "Authorization" error. Any suggestions please.
Thanks,
Deepa.

Hi Deepa,
I'm facing the same problem, which basically is no issue but expected behaviour?!
Reason: When allowing access on Multiproviders via queries you probably restrict the data selection with authorization variables, where users have to select characteristics they are allowed to see.
In that way, you prevent that users can see data for which they are not authorized.
Finally, if the direct selection via Multiprovider was allowed without any restriction, your whole authorization concept would be for the birds :-)
In my case, I wanted to give users just an overview of the "last update dates" of several infocubes:
=SAPGetSourceInfo("DS_1"; "DataSourceName")
=SAPGetSourceInfo("DS_1"; "LastDataUpdate")
(... we all know that Multis can display only the oldest load date of any of all Cubes below....)
I even deleted the cross-tabs, and kept only the reference to the DS_x ... But still, when users try to refresh the data sources they are not even allowed to select pure technical Cube Information :-/
Regards, Martin
PS: If anyone else has a different idea as solution to my problem, just let me know :-)

Getting Error while Execute SSIS Package from Console Application

Dear All,
SSIS package working fine directly.
I got following error while execute SSIS package from C# console application.
The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
OLE DB Destination failed validation and returned error code 0xC004800B.
One or more component failed validation.
There were errors during task validation.
Code :
public static string RunDTSPackage()
Package pkg;
Application app;
DTSExecResult pkgResults;
Variables vars;
app = new Application();
pkg = app.LoadPackage(@"D:\WORK\Package.dtsx", null);
Microsoft.SqlServer.Dts.Runtime.DTSExecResult results = pkg.Execute();
I have recreate the application with again new connection in SSIS.
Still not working, Please provide solution if any one have.
DB : SQL Server 2008 R2
Thanks and regards,
Hardik Ramwani

The connection "{79D920D4-9229-46CA-9018-235B711F04D9}" is not found. This error is thrown by Connections collection when the specific connection element is not found.
Cannot find the connection manager with ID "{79D920D4-9229-46CA-9018-235B711F04D9}" in the connection manager collection due to error code 0xC0010009. That connection manager is needed by "OLE DB Destination.Connections[OleDbConnection]"
in the connection manager collection of "OLE DB Destination". Verify that a connection manager in the connection manager collection, Connections, has been created with that ID.
Are you sure that you are running the same package via .NET which works fine from Visual Studio?
By reading error message, I can say that you have copied OLEDB task from another package OR you have deleted one OLEDB connection manager. Now when package is run this task tries to use the connection manager and not found thus throws error message.
Open all OLEDB destination tasks and you find connection manager missing. Connection Manager name should be provided there
Cheers,
Vaibhav Chaudhari
MCSA - SQL Server 2012

BW Authorization Error documentation Question

Hi,
I have a question, may be you can help in this:
Q: In BW Analyzer if we get the following authorization error for some reason:
->Authorization Check
You do not have authorization for Add or Create
There is a Details tab to see the authorization error details. I need to add documentation for the naming conventions the Users need to use so that it's easy for Users to see what is the reason for the error and what naming convention do they need to use to prevent the error.
Right now, details tab shows "No Documentation Available". How can I add documentation here? Where do I add this documentation and how do I link it to the Authorization Error Message's Details tab?
I tried running RSRTRACE to see which function modules/programs get called but that does not help. It gives me the following two function modules which are being called when I get the error message and when I click the details tab:
RZX0_MESSAGES_GET
RZX0_MESSAGE_H_GET
and surprisingly when I try to look them up in SE37 they do not exist What can be the reason for this?
Is there a system transaction, like .. SM02, in BW where we can define or create authorization error message documentation for BEx Analyzer? How do I link it to the Authorization Error message?
Your help or advise will be very much appreciated.
Thank You,
Regards,
Mandeep Virk

It can be done via SE91.
Message Class is R9 and message number is 108
We have to define the Long Text and save it under the RSZ class.
It works for me now.
Thanks,
Mandeep

Authorization error message in iTunes when transferring music to iPod

This has been driving me nuts. I have a 30GB iPod w/ the color display and a brand new Intel MacBook with the latest version of iTunes (iPod's been updated as well). My previous computer, a Powerbook G4, fell off a counter and died on the spot, so my only back up for all the music I have is what's on my iPod.
First, I couldn't transfer all of my music from my iPod to the MacBook because of an authorization problem with iTunes. So, I authorized my computer, which still didn't solve the problem. I resorted to using iPodRip which successfully got all the music off the iPod and onto the MacBook. No harm, no foul.
The problem now is that I can't transfer music from the MacBook to the iPod for the exact same reason: I get the error message saying that some songs are not authorized to play.
I have tried the following things:
1) Deauthorizing and re-authorizing my computer on iTunes = No luck. iTunes informs me that I am now authorized and that I have 1 out of 5 authorizations in use, but the songs still won't transfer.
2) Playing an "unauthorized" song in iTunes. Again, I get a message asking me to enter my account info and then thanking me for authorizing. However, the song won't play in iTunes, nor will it transfer to the iPod.
3) Restoring my iPod to the factory settings. Not sure why I tried this, but it didn't work and is the reason why I no longer have all my songs on my iPod and am trying so desperately to get them back.
4) Used iPodRip to try to reverse the process, but again, no dice.
I have a feeling that the answer to this is stupidly simple and I'm somehow missing some crucial step somewhere. Can someone help me out?
Intel MacBook Mac OS X (10.4.7)

Alright, I think I solved the problem on my own. For what it is worth, restarting the computer seemed to solve all of my issues. After restarting, iTunes accepted my authorization (alerting me that I now have 2 of 5 machines authorized) but my iPod kept disconnecting after syncing. So, I reset the iPod, downloaded iTunes 7 and reinstalled it, and whaddya know- It works! I have all of my music on both my computer and the iPod.
It was stupidly simple, too.

NO Authorization error when accessing Functional module RH_CUT_OBJECT

Hi,
I am getting NO AUTHORIZATIOn error when I am executing SE37-->FUNCTIONAL OBJECT-RH_CUT_OBJECT.
I also checked SU53 screenshot which says AUTHORIZATION CHECK SUCCESSFUL and there are no errors or missing authorizations highlighted in SU53.
I switched on the TRACE-ST01 then also the error is not captured.
I would like to know WHY am I getting NO AUTHORIZATION error.
I am already having access to T-CODE SE37, SE11, SE80, SMARTFORMS and authorization object S_DEVELOP.
I need to know this ASAP on why I am getting NO AUTHORIZATION error when I am trying to access the FUNCTIONAL MODULE RH_CUT_OBJECT whereas I am having all the required authorization required for ABAP Developer including SE37.
Is it something I need change at ABAP code level.
Please advise ASAP.

The reason is ..You do not have acess to see/acess the data this FM is trying to acess ...Debug the function module keep a breakpoint at The Raise statement see which authorization you do not have ....BTW this is my guess you are trying to demilit certain objects /infotypes using this FM and delimit basically makes that object non-usable in that system .So it is quite evident that every one will not have authorization for that .Please post in detail that what is it that you are trying to achieve using this function module .....
Also you can check with debugging which authority object is being checked before raising the message and can ask security team to get that added to your profile ....
Thanks,
Anjaneya

Authorization Error using CozyRoc SSIS+

Similar Messages

Maybe you are looking for