Authorization error when I go to Directory tab in XI/PI admin page
I was able to login to XI Administartion page, from administartion page, when I go to Directory tab, I get authorization error, what userid I need to use to login to XI administration and drill down to directory tab
thanks
ramesh nallapu
Hi Ramesh
You can have roles set for any user
Use this for more clarification
http://help.sap.com/saphelp_nw04/helpdata/en/51/50104159ecef23e10000000a155106/content.htm
Close the thread as i think the problem is resolved
Thanks
Gaurav
Similar Messages
-
Procurement Coordinator received Authorization Error when creating Bid Inv
Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity ManagersHi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul -
NO Authorization error when accessing Functional module RH_CUT_OBJECT
Hi,
I am getting NO AUTHORIZATIOn error when I am executing SE37-->FUNCTIONAL OBJECT-RH_CUT_OBJECT.
I also checked SU53 screenshot which says AUTHORIZATION CHECK SUCCESSFUL and there are no errors or missing authorizations highlighted in SU53.
I switched on the TRACE-ST01 then also the error is not captured.
I would like to know WHY am I getting NO AUTHORIZATION error.
I am already having access to T-CODE SE37, SE11, SE80, SMARTFORMS and authorization object S_DEVELOP.
I need to know this ASAP on why I am getting NO AUTHORIZATION error when I am trying to access the FUNCTIONAL MODULE RH_CUT_OBJECT whereas I am having all the required authorization required for ABAP Developer including SE37.
Is it something I need change at ABAP code level.
Please advise ASAP.The reason is ..You do not have acess to see/acess the data this FM is trying to acess ...Debug the function module keep a breakpoint at The Raise statement see which authorization you do not have ....BTW this is my guess you are trying to demilit certain objects /infotypes using this FM and delimit basically makes that object non-usable in that system .So it is quite evident that every one will not have authorization for that .Please post in detail that what is it that you are trying to achieve using this function module .....
Also you can check with debugging which authority object is being checked before raising the message and can ask security team to get that added to your profile ....
Thanks,
Anjaneya -
Error when selecting the Report Center tab of the Issues web DB
I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Get a "Download Error" when clicking on the "App" tab of Creative Cloud.
Get a "Download Error" when clicking on the "App" tab of Creative Cloud.
Yeah I finally had to call Adobe and some there did a screen share with me and they took care of it. I am running OSX 10.9.3 my issue was that the latex OSX update didn't communicate with the app. Like I said Adobe did a screen share with me and fixed it for me I think he just uninstalled and reinstalled and I want to say thats what took care of it.
-
RPLDAP_EXTRACT - Error when updating the LDAP directory
I am connecting SAP IdM 7.0 to SAP HCM via VDS.
So far:
The VDS responds to LDAP browser, the connection tests from SAP GUI are succesful.
I can execute my copy of the standard report LDAPEXTRACT46C in SAP GUI and can see what data is exported.
I get the "Error when updating the LDAP directory" error when trying to execute the RPLDAP_EXTRACT program.
An error occurred during creation of one or more data records in the LDAP directory. The error has been logged in the system used to export data to the LDAP directory.
You can find logs in the database tables TLDA_LOG (HR-LDAP: Non-Exported Data Records) and TLDA_MSG (Error Messages About Data in Table TLDA_LOG). Table TLDA_LOG contains data records that could not be exported; table TLDA_MSG contains the corresponding messages.
I didn't see anything that makes sense in tables mentioned in the error message above.
I have some questions as the documentation supplied with IdM is bit brief; According to the configuration guide I don't need to have any mapping in VDS like "conversion of internal attributes" or "conversion from internal attributes", has anyone else entered the mapping in VDS?
Any pointers in going forward?
Edited by: pasikuikka on Oct 20, 2009 11:01 AMHi Pasikuikka,
just a few questions:
Have you checked TA HRLDAP_MAP? (Each field must have its expression in the LDAP-Target)
Have you checked TA LDAPMAP? (Each field must have its expression in the LDAP-Target)
Maybe there are attributes listed in the query, but not in the HCM-Staging-Area in the Identity Center.
Have been new attributes created in the HCM-Staging-Area and, if so, are they connected to the right Entry-Type (MX_HCM_Employee or something like that)?
Hope this puts you on the right track.
Kind regards,
Achim Heinekamp -
I downloaded Firefox 4.01 and now when i open a new tab, i get a blank page instead of my home page. How can I default to my home page when a new tab opens?
You can do that by using an add-on such as:
* NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
* New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
Another way of opening the home page in a new tab is to middle click on the home button in the navigation toolbar. -
get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
Script: chrome://browser/content/places/editBookmarkOverlay.js:909 -
Authorization error when logon to IB-Repository and Directory
Hi,
we patch from SP12 to SP13. At SP12 logon to IB (Repsoitory and Directory) work without problems. But
after applying SP13 to XI we can't logon to IB anymore.
The error is "Authorization error, unknown user name or
incorrect password". The user we use can logon to the
Server so password should be ok. And the same user have
been also used when we still have SP12.
We have cleared the WS Cache an do the Re-Ininitialize
like mentioned in other thread dealing with this problem.
But it doesn't help so far.
Login to SLD, Runtime Workbench with the same user work
without problem. So it can not be the issue with wrong
name and password.
Have somebody faced this problem after patching to SP13.
Our XI run on Windows 2000.
Thanks,
Ly-Na PhuHi,
First check in RSSM whether your InfoProvider is checked for authorization object 0PERS_AREA. Also determine whether do you need this authorization object ?If yes, then it should be checked otherwise check mark should be unchecked. If 0PERS_AREA is checked for your InfoProvider, then you should have some value in this object when you create the role. Either * for all values or restricted value for it. Goto Pfcg select the role and add the authorization values for the 0PERS_AREAobject.
GSM. -
Authorization errors when access to Integration builder design
HI ALL,
I am roger,
i have XI system, i can open http://localhost:50000/rep/start/index.jsp
and the the display content is fine. but when i click the 'integration builder' or 'integration directory' link, it prompt the username and password, then i input my username and password, the error
'Authorization error; unknown user name or incorrect password' occurs.
i can access the NWA using the username and password and my account has the SAP-XI_administrator role. i don't know why i can't access the 'integration builder' or 'integration directory' , what cause this problem?
Very thanks for your replyHi Roger,
Go through this link and check you have the same roles as mentioned in this:
This link is best to know the roles.
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
Trouble logging to Integration Builder ( IR / ID ) ?
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
Regards,
Sarvesh -
00933 error when clicking on the data tab for the selected table
Hi,
I'm getting the following error when selecting a table from the tree view then clicking on the data tab:
An error was encountered performing the requested operation:
ORA-00933: SQL command not properly ended
00933.00000 - "SQL command not properly ended"
*Cause:
*Action:
Vendor code 933
The exact same tables created from sqlplus for a different user in the same database work fine. Note, I'm not typing any SQL in myself. It would appear this happens on all tables created as this user. I cannot see any difference between permissions for this user and others which work but the failing user does have a "-" in the username and password which I'm suspicious of.
This is SQL Developer v 1.2.0 (build 29.98) (the most recent I believe, Oracle Database 10g Express Edition Release 10.2.0.1.0 and Linux ubuntu.
Thanks
Martin"-" is not allowed in identifiers and is almost certainly the cause of your problem. This can be got round by quoting i.e. using "STUPID-NAME" instead of STUPID-NAME.
I'm slightly surprised that SQLDeveloper doesn't quote the statement. Perhaps it quotes table names but not user names. -
Authorization error when exporting business system
Hi ,
I am on XI 7.0 spo9.I am trying to transport from dev to qa .
I am able to easily export (login using xisuper ) Technical system.
However while exporting Business system .when it gives me to download a file I get an authorization error .
Kindly helpHi,
Check XISUPER has the below roles in SU01.
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_SLD_ORGANIZER
SAP_SLD_GUEST
add the above roles for XISUPER and get the green color those roles using Tcode : PFCG.
The above roles should be in green color.
Regards,
Venu. -
When I try to get onto YouTube, the site is completely white with the words "Authorization Error" in the top left corner. For a while, all I had to do was reload YouTube and it was fine. Now it just won't work at all. I have Internet Explorer on my computer as well and YouTube works fine on there. When this error occurs, the icon in the address bar changes back to YouTube's old icon.
I have tried:
-Updating Firefox
-Restarting the computer
-Closing and re-opening Firefox
-Typing https instead of http before the address
-Googling and clicking Google's link to the site (yes, a feeble attempt, I know)
Does anyone know what I can do to get YouTube back on my favorite browser? I'd like to stop having to run to Internet Explorer to use this site.
Thanks!Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
Authorization Error when running queries built on IP Aggregation Levels
Hi,
Did anyone encountered this kind of issue.
We are in NW04s SP 9.
When running a query built on Integrated Planning aggregation levels getting authorization error
" Do not have authorization Component !! ARMMGASL ". (ARMMGASL is the name of Multi Provider)
Queries built directly on Multi Provider "ARMMGASL" works fine.
Security trace doesn't show any failures
Any help or info on this highly appreciated.
Thanks,
Suresh YalavarthiHi Frank,
We have the same issue. What did you do to solve it?
The suggestions you received are already investigated/done, but don't provide a solution.
regards, André -
Authorization error when syncing apps from iphone to mac, mac to iphone
I am having this error with both apps I've synced from my iPhone to my Mac, and one I purchased from ITunes (which as a side problem, I can not sync to my iPhone no matter what I try). I have one iTunes account and it is the same on my computer and on my iPhone. However, the one I bought on my mac I can't authorize on my computer, and I can't sync some back because I get this same error message (I have all the latest software on phone and Mac):
THERE WAS AN ERROR STORING YOUR AUTHORIZATION INFORMATION ON THIS COMPUTER
The required directory was not found or has a permission error. Correct this permissions problem and try again, or deauthorize this computer if the permissions can not be changed.
Is this just becuase these apps aren't made to USE on a computer? Because that would make sense. I'm just worried it has something to do with the app I purchased on ITunes not syncing back to my iPhone.I created a new user on my macbook and tried to authorize the computer but got the same authorization error. This doesn't have to do with the fact that I have once used a different iTunes account? (not since I have had the iPhone. I have tried to figure out how to delete this but it looks as if apple doesn't want me to.) Plus, it's the same email as my dot mac which I've ALSO been having trouble with the past few months-- it keeps resetting on its own and my keychain and iphone can't get into it. online chat has not solved the problem so i decided to just let it expire...
Ive been using a mac for 15 years and have never had as many problems as i've had these past few months.
Maybe you are looking for
-
5.0 will not open, but 3.5 works fine
i'd recently tried updating my browser to the FF with Twitter variant offered on twitter's site. but after installation the browser wouldn't open at all. it would show up on the task manager, but that was the extent of the browser's functionality. i'
-
Can't connect to Internet through working WiFi connections
My system is constantly getting bad IP addresses from wireless base stations. Problem started while I'm traveling. At last location, of my three computers my PC would connect, but the two Macs kept having problems. Both worked at first, but then one
-
IE11 on WIn 8.1 Update 1 crashes. AppHangTransient
Hello, We have a IE11 which freezes at start and then crashes on a Windows 8.1 update 1. I have tried to uninstall it but i've got a error message. This is the message i've got in the Event Viewer : Fault bucket , type 0 Event Name: AppHangTransient
-
.Mac gallery in iweb site with custom domain name
This is my first post on the boards and I want to say that switching from pc to mac has been one of the greatest moves of my life. Anyways Im a photographer and have my own domain name. Ive created a site in iweb with .mac photo galleries on it. To u
-
Selecting HDD for video capture
I'm just now trying out OnLocation CS4 and i can't seem to locate a function/control that will let me select where to capture my video to. I have an external FW HDD that is accessable from the O/S but see no menu items in OL that will allow me to cho