Authorization Error while extracting data after applying SAP upgrade patch

Hello All,
Recently we have updated the SAP BW patch to 24 and ECC patch to 22. I have the access to perform extraction in RSA3 tcode in ECC.
However, While performing the data load in BW, the process is failing at the Infopackage step with the following error:
"You do not have authorization to extract from Datasource XXXX, Component FI-IO. Message no. R8073"
My basis guy has given the necessary acces.. but still the issue persists..
Please provide solutions ASAP... its very critical issue...
Regards
Sneha

Hi,
Are you loading the data with your username? it may cause problem sometimes because you may not have the authorization object S_RO_OSOA assigned in your roles.
Try scheduling the loading job with the background user with which normally the process chains are run.
i guess this should solve your problem, if not try adding this authorization object to the corresponding role and you can run with your user name itself.
I am not sure about the auth objt , try and see.
regards,
karthik.

Similar Messages

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

Runtime Error while extracting data by datasource based on function module

Hi all,
I am facing an issue while extracting data from a customised data source based on a new function module.
The datasource is extracting data successfully for only 15000 records but after that the runtime error is displayed.
I am not able to extract whole data from R/3 system.
Please take a look into the details and tell me what should I have to do.
Details of Issue:
Runtime Error : GETWA_NOT_ASSIGNED
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZ_99Z_BW_SD_PRICING"had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
    (data segment 32790).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
- You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Edited by: anshu13 on Apr 27, 2010 10:28 AM

The code is displayed here:
error is in line no. 625
Source Code Extract
Line SourceCde
595            <fs_fldval> = l_fieldval.
596            APPEND <fs_dyntable> TO <it_dyntable>.
597            CLEAR :l_fieldval, wa_fldcat.
598            CLEAR l_totlength.
599            CLEAR <fs_dyntable>.
600         ENDIF.
601        ENDIF.
602        MOVE-CORRESPONDING <dd03l_fields> TO wa_dd03l.
603        IF <dd03l_fields>-datatype EQ 'DATS'.
604          l_fieldval = 'X'.
605       ELSE.
606        SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
607          IF l_totlength IS INITIAL.
608            SHIFT l_totlength LEFT DELETING LEADING '0'.
609            l_totlength = '0'.
610          ENDIF.
611          l_currlength = <dd03l_fields>-intlen.
612          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
613          l_totlength = l_totlength + l_currlength.
614        ENDIF.
615*** Consider both field name and domian name for checking in range list:
616        IF <dd03l_fields>-fieldname IN s_fieldlist.
617          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
618        ELSEIF <dd03l_fields>-domname IN s_fieldlist.
619          wa_fldcat-fieldname = <dd03l_fields>-domname.
620        ELSE.
621          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
622        ENDIF.
623        ASSIGN COMPONENT wa_fldcat-fieldname
624             OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
>>>>|        <fsfldval> = l_fieldval._
626        CLEAR l_fieldval.
627        CLEAR l_currlength.
628      ELSE.
629        IF <dd03l_fields>-datatype EQ 'DATS'.
630          l_fieldval = 'X'.
631       ELSE.
632          SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
633          IF l_totlength IS INITIAL.
634            SHIFT l_totlength LEFT DELETING LEADING '0'.
635           l_totlength = '0'.
636          ENDIF.
637          l_currlength = <dd03l_fields>-intlen.
638          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
639         l_totlength = l_totlength + l_currlength.
640        ENDIF.
641*** Consider both field name and domian name for checking in range list:
642        IF <dd03l_fields>-fieldname IN s_fieldlist.
643        wa_fldcat-fieldname = <dd03l_fields>-fieldname.
644       ELSEIF <dd03l_fields>-domname IN s_fieldlist.
Edited by: anshu13 on Apr 27, 2010 11:33 AM

Error while extracting data from a remote system

Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
Thanks

Hi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya

Error while extracting data from Generic datasource

Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
Sonu

Hello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu

Error While Extracting data

Hi All.
The below is the error, which I am getting while extracting data.
Please let me know the reason, and how to overcome the below error.
Status Log
Warning ORA-02049: timeout: distributed transaction waiting for lock
Error ORA-01555: snapshot too old: rollback segment number 19 with name "_SYSSMU19$" too small
ORA-02063: preceding line from RPMSP@RPMSP_LOCATION
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 11
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 1622
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 2228
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 6253
ORA-06512: at line 1
Regards,

Hi,
Even though you have deleted the data from Datatarget, but you have not yet deleted the delta initialization inforamtion at infopackage, before re starting the delta process. So delete the information from BW system , by double click infopackage--> Schedular(menu option) --> 'Initialization option for sourcesystem' --> delete the record.
With rgds,
Anil Kumar Sharma .P

Error while loading data after level 17 patch

Hi all,
A week ago we had patch level 17 implemented on our SAP NetWeaver BI 7.0 system. Since then, we cannot load any data to some cubes using update rules. We get "Error when generating the update program" (Message no. RSAU484), status red while loading data.
I tried activating the update rules
We get te same error when loading data from a DSO into a cube.
The strange thing is that it doesn't happen for all the objects in the system. We have troubles loading deltas from 2LIS_12_VCITM (delivery items), 2LIS_13VAITM (sales order items) and from a BI content DSO in assets accountng.
Please if you have any idea or if this happend to you, i appreciate any suggestion.
This is not an implementation, these processes are already live for months, and we didtn't have any problems before the patch..
thanks,
Andreea

We ran into same issue & another one during our BI 7.0 SPS15/SP17 upgrade.
The solution:
1. Apply 2 notes:
[Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update|http://service.sap.com/sap/support/notes/1146851]
[Note 1152453 - Termination generating InfoCube write program|http://service.sap.com/sap/support/notes/1152453]
2. Then run program RSDD_RSTMPLWIDTP_GEN_ALL
to generate the new programs for InfoCubes from the template RSTMPLWIDTP and cleans up the staging table RSUPDINFO per note 1152453.

Error while extracting data from essbase

Hi All,
Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into the interface, an error occurs. And it works fine if I extract directly (with no joins).
Is there any other way except using staging table? Our data vloume is large, using staging table will waste lots of storages.
The messages as below.
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: Connecting to Essbase application [CORPPROD] on [172.18.93.150]:[1423] using username [admin].
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Successfully connected to the Essbase application.
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_FILE = D:\ODI_ESS_QUERIES\QUERY.TXT
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_TYPE = ReportScript
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_CALCULATION_SCRIPT = null
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXT_COL_DELIMITER =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option POST_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: inside getAppData()
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: Got Source Metadata
2011-07-12 23:34:01,119 ERROR [DwgCmdExecutionThread:null:49]: The number of columns returned by script [13] is less than the source data columns exposed [14]
com.hyperion.odi.essbase.ODIEssbaseException: The number of columns returned by script [13] is less than the source data columns exposed [14]
     at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.validateColumns(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.init(Unknown Source)
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor769.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx85.f$0(<string>:1)
     at org.python.pycode._pyx85.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
2011-07-12 23:34:01,119 INFO [DwgCmdExecutionThread:null:49]: Logging out and disconnecting from the essbase application.
From the working steps, I found a redundant column (Entity) was added while creating work table. Is it the reason?
create table HYP.C$_0CUX_ABC_HYP_INTERFACE
     C14_HSP_RATES      VARCHAR2(80) NULL,
     C3_ACCOUNT      VARCHAR2(80) NULL,
     C10_PERIOD      VARCHAR2(80) NULL,
     C7_SCENARIO      VARCHAR2(80) NULL,
     C9_CURRENCY      VARCHAR2(80) NULL,
     C15_YEAR      VARCHAR2(80) NULL,
     C6_DATATYPE      VARCHAR2(80) NULL,
     C2_VERSION      VARCHAR2(80) NULL,
     C1_CATEGORY      VARCHAR2(80) NULL,
     C12_ENTITY      VARCHAR2(80) NULL,
     C13_ENTITY      VARCHAR2(80) NULL,
     C11_DEPARTMENT      VARCHAR2(80) NULL,
     C8_PROJECT      VARCHAR2(80) NULL,
     C5_DATA      NUMBER(18,8) NULL
Appriciated!

Extract the essbase data to a staging area and then do the transformations in another interface.
The adaptor needs to extract the data first.
Cheers
John
http://john-goodwin.blogspot.com/

Error While Extracting Data in ODS

can anyone help me out i have created an ODS ZMM_OD81 but i got the following error messaged while extracting the data, pl. help me asap.
1. SIDs determined successfully for request REQU_3YGDERK275SLEUNKLGWOR30GZ from ODS object ZMM_OD81
2. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 incorrect with status 9
3. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 not correct
4. Inserted records 1- ; Changed records 1- ; Deleted records 1-
5. No confirmation for request ODSR_3YGHO1DSYIDFO0B7E8ZO2Q8MB when activating the ODS object ZMM_OD81
6. Communication error (RFC call) occurred
7. Activation of data records from ODS object ZMM_OD81 terminated.
thanx
abhishek suppal

Hi Abhishek,
I guess the error occured while activating the request and not while loading it. You can confirm this by checking in the details tab of the monitor for that request.
Try following the below steps. They might solve your problem.
1> Go to manage view of the ODS and force the QM status of the request to 'GREEN'.
2> Try activating the request manually.
Regards,
Sree

Error while extracting data from ODS using Infospokes - URGENT

Hi all,
I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
Any ideas on how I can see what is the exact error and how to debug this?
thanks
Sabrina.

Hi Sabrina
service.sap.com can help you getting the details of your mesg.
I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
Here is the note details also
<i>Symptom
Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
Reason and Prerequisites
The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
Solution
Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
BW 3.0B
Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
BW 3.1 Content
Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
Refer to note 110934, which contains information about BW Support Packages.</i>
Regards,
Rohini

Error while Extracting data using RSCRM_BAPI

Friends
We are on 3.5 system upgraded recently. I am getting the following Error message while trying to extract data from a query to a table using the transaction RSCRM_BAPI. The Error message says ' Internal Error in Method CHECK_TABLE_NAME(RSCRMBW_EX_NAMESPACE_GET).
This was working fine prior to upgrade. I scoured all the OSS notes, could not find an appropriate one to solve the issue.
Have you had this problem and any thoughts on resolution ? Appreciate your inputs very much.
Regards
Mathur Sreedhar

Hi Mathur,
did you ever resolved this Issue? if so can yoou share with me the solution. i am having the same problem, we are in 3.0 . it works fine in Development and Test. but when i try it in Production . i get this error.
'Internal error in method CHECK_TABLE_NAME (RSCRMBW_EX_NAMESPACE_GET)..
if you know the answer. would please share with me.
your help would be greatly appreciated.
Thanks.
Sreeni.

Runtime error while extracting data from 0C0_PC_*

Hi,
When I am trying to extract data from DataSources 0CO_PC_01 and 0CO_PC_02, I am getting an
error. it says "DO_WHILE_VARY_NOT_IN_RANGE"
Any Comments?
Thanks,
Pritam

Hi,
Please searcn SDN, you will get the solutions straight away:
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=do_while_vary_not_in_range&cat=sdn_all
It seems that there is a note for this, Please check SAP Note: 650725
Hope this solves your concern...
Cheers,
Habeeb

Error while extracting data from Generic VBAK Table

Hi,
When i am extracting data from VBAK using generic extraction via tavle, i am, getting the error "Syntax error in program "SAPLXRSA ""
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSAP" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLXRSA " in include "ZXRSAU01
     " in
    line 159:
    "The type of the database table and work area (or internal table) "L_ST"
    "R_CE1IDEA" are not Unicode convertible. ."
Please help me out in fixing this,
Thansk,

do you have an user-exit? if yes, post the code....
did you try regenerating the entire stuff (ds, structure,...)...there might be a mismatch between the structures of datasource and the generated extraction program....
M.

Authorization Error while extracting data after applying SAP upgrade patch

Similar Messages

Maybe you are looking for