Authorization error while HCM transfer

Hi,
we have limitations to provide SAP_ALL to the TDMSUSER in source system. So we have provided some basis admin authorizations along with CNV* authorizations. we are doing HCM scrambling using process type "ERP Initial Package for HCM Personnel Administration (PA)". In the activity "Transfer Selection Criteria" the Confirm online" button is not active. In the log it is mentioned that
"You do not have sufficient authorisations to execute the confirm function.
Diagnosis
You lack the TDMS4HCM: Transfer program Confirm mode control authorization. Without this, you can not execute the confirm function and the confirm buttons are shown in grey."
Could any one please inform which are the  missing transactions we have to add to the role / how do we find out the necessary authorizations. I have gone thorug the Security guide, it is not providing solution.
Thanks in advance.
Shylesh

Hello Shylesh,
You can assign the role  SAP_TDMS_HCM_MASTER for the tdms user.
In the above role, it has 2 objects 1. TDMS4HCM01 2. TDMS4HCM02
For TDMS4HCM02, you need to maintain the value '*' for TDHC_PACK.
After providing the above authorization, you can confirm online in the transfer selection critieria activitiy.
Regards,
Prasanth

Similar Messages

  • Error while activating Transfer Structure

    Hi Expert,
    we have upgraded BW3.1 to BI 7.0, we are getting error while activating transfer structure for 0mat_sales_attr and 0mat_sales_text.
    Error is Error while creating table 'EDISEGMENT' entry '/BIC/CIOD0MAT_SALES_TEXT'
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIOD0MAT_SALES_ATTR' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists
    I have tried report RS_TRANSTRU_ACTIVATE_ALL also, but no success.
    I have checked table and entry is there. i have checked we31 for segment there also segment is existing.
    Regards,

    Hi Dubey,
    I am facing the same issue when i transport the datasource from DEV to QA.i applied the OSS Note 493422 ,But could not resolve the issue.Pls let me know the solution to fix  this.
    Thanks,
    Renu

  • Error while activating transfer cules of 0CUSTOMER_TEXT in BI 7

    Hi,
      I am finding the following error while activating 0CUSTOMER_TEXT in BI 7
      1.  Transfer structure 0CUSTOMER_TEXT_BA does not exist and
      2.   Data element for TXTMD could not be created.
      Can you please suggest me how to resolve these issues ?

    did you replicate ur 0CUSTOMER_TEXT as 7.0 datasource, then you need to use transformations and not transfer rules. if you dont want to use 7.0 Ds, then go to RSDS and recover the datasource to 3.x(menu options). then you can use 3.x dataflow.

  • Error while activating transfer structure and communication structure.

    Hi all,
    I am getting an error while activating the transfer structure, I have the same datasource comming from a 2nd instance of R/3 and its working fine with the 2nd source.
    I mean same datasource comming from two R/3 instances and connecting to one infosource.
    <b>Maximum length of segment is 1000 characters, current length is 2567</b>
    Please let me know.
    thanks,
    Sabrina.

    Hi Sabrina...
    there is an OSS Note (120446) related to your problem, but it seems related to a very old release (what's yours ?)
    Anyway, it suggests:
    "the transfer method in the transfer rules must be set to TRFC with ODS"
    Hope it helps!
    Bye,
    Roberto

  • Error while activating transfer rules needs help.

    The error while activating 0FI_AP_6 transfer rules is listed below.
    ''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

    Hi
    The problem is with your data source replication.
    Activate your data source & replication too.
    Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
    If not so, Activate your transfer rule manually.
    Regadrs
    Saravanan.ar

  • Authorization error while configuring  TREX for HR - talent search

    Hi All
    HR team is performing  talent search configuration and they are using Tcode ESH_Cockpit. Here while creating, they  get this error "Error while preparing".
    For one of the failed connectors (eg: HRTMC AES Documents), job log is as given below:
    24.10.2011 08:34:16 Job started
    24.10.2011 08:34:16 Step 001 started (program ESH_SE_CONNECTOR_MOD_BGD, variant &0000000000027, user ID T710752)
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check CP_USER_ALL:
    24.10.2011 08:34:50 Path-based authorization check CP_USER_ALL has wrong data
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    24.10.2011 08:34:50 Not all authorization fields are mapped to node fields or constants
    24.10.2011 08:34:50 Authorization check TB_PLOG, auth. obj. field assignments:
    Here they have SAP_ALL assigned and even then they are getting above authorization related error . 
    Your advise will be really helpful. Thanks in advance for your help.
    Regards,
    Aditya

    TREX also uses gateway programs.
    Check with your basis folks or tcode SMGW (go to --> expert functions --> external security) to see whether it is restricted.
    There are also some SAP notes about this...
    Cheers,
    Julius

  • "Authorization error" while accessing Multiprovider in Analysis for excel tool

    Hi,
    We are using "Analysis for excel" 1.4 version. My users are executing all queries out of any MP with out any issue. But while accessing Multi Provider in "Analysis for excel" tool they are geeting "Authorization" error.  Any suggestions please.
    Thanks,
    Deepa.

    Hi Deepa,
    I'm facing the same problem, which basically is no issue but expected behaviour?!
    Reason: When allowing access on Multiproviders via queries you probably restrict the data selection with authorization variables, where users have to select characteristics they are allowed to see.
    In that way, you prevent that users can see data for which they are not authorized.
    Finally, if the direct selection via Multiprovider was allowed without any restriction, your whole authorization concept would be for the birds :-)
    In my case, I wanted to give users just an overview of the "last update dates" of several infocubes:
    =SAPGetSourceInfo("DS_1"; "DataSourceName")
    =SAPGetSourceInfo("DS_1"; "LastDataUpdate")
    (... we all know that Multis can display only the oldest load date of any of all Cubes below....)
    I even deleted the cross-tabs, and kept only the reference to the DS_x ... But still, when users try to refresh the data sources they are not even allowed to select pure technical Cube Information :-/
    Regards, Martin
    PS: If anyone else has a different idea as solution to my problem, just let me know :-)

  • Error while installing transfer rules for 0PM_C03 from Business content

    Hi All,
    When i try to install the transfer rules for the Infocube 0PM_C03 from the Business Content, i get the following error:
    "Mapping between 2LIS_17_I3HDR  2LIS_17_ORDER is inconsistent".
    Here 2LIS_17_ORDER is the Infosource, and 2LIS_17_I3HDR  is the datasource.
    Also, kindly let me know how can the Infosource and the datasource have different names, like in the case for this Cube.
    Kindly help...

    Hi,
    The datasource and infosource can have different names no issue with that.
    and while selecting transfer rule for installing find with '2LIS_17_I3HDR'.
    Regards,
    Rathy

  • Error while doing transfer posting

    Hi,
    While doing transfer posting I am getting an error given below:
    "Deficit of SL Bl.stock returns 10 SU : (material) (plant) (stor loc)"
    Please help me in this regard.
    Thanks in advance.
    Sonal

    Hi,
    Please check once again. There is a deficit of stock in the storage location in the plant. I guess you are mentioning the incorrect s.loc in mb1b.
    Also check if there is any return material in the storage loc.
    Regards,
    satyajit
    Edited by: Satyajit Kumar on Dec 23, 2008 11:24 AM
    Edited by: Satyajit Kumar on Dec 23, 2008 11:25 AM

  • Authorization error while attaching document in ME22N

    Hi,
    Scenario 1: I attach a document in ME22N and then save it. Result: I get an authorization error.
    Error is: "You have no authorization for extensions (activity03)"
    Scenario 2: I just make a change (say in price) without attaching any document and then when i try to save it. Result: There is no authorization error.
    Message (output) type in both the cases is EDI.
    On further investigation, we found the authority-check abap statement which is responsible for throwing the error.
    authority-check           object authority_obj_edi_deftool
                id 'EDI_TCD'  field  authority_tcode_edi_deftool
                id 'ACTVT'    field  pi_activity
                id 'EDI_DOC'  DUMMY
                id 'EDI_CIM'  field  pi_cimtyp.
    This statement gets executed for both the scenarios and with the SAME variables but it throws error in case of scenario 1 only.
    Following are the values of the variables in BOTH cases:
    authority_obj_edi_deftool = S_IDOCEFT
    authority_tcode_edi_deftool = WE30
    pi_activity = 03
    pi_cimtyp = Z2ORDERS02
    Any help is appreciated.
    Regards,
    Chinmay

    Dear,
      Kindly contact your basis team. it will help you.
      Please give him SU53 screen short for his reference.
    Regards,
    Sandip

  • Authorization Error  while executing Workbooks,

    Dear ALL
    We have authorization in place where users are restricted to execute Workbooks PLANT wise.
    For this 0PLANT is kept authorization relevant.
    0PLANT__0COMP_CODE  is Navigational Attribute of 0PLANT also marked as authorization relevant.
    Till now all user were assigned the Analysis authorization A_PLNT_XX as  0PLANT = XX
    But suddenly now the users are getting authorization error of NOT BEING AUTHORIZED .,
    The error log is as shown below.
    Relevant Characteristics for Detailed Authorization Check  
    (Characteristics with Full Authorization Are Not Listed!)
      List of Effective Authorization-Relevant Characteristics for InfoProvider ZMMIMMP05:  
    0PLANT 
    0PLANT__0COMP_CODE 
    0TCAACTVT 
    Subselection (Technical SUBNR) 1  
    Supplementation of Selection for Aggregated Characteristics
      Check Added for Aggregation Authorization:     0PLANT__0COMP_CODE  
      Authorizations missing for aggregation (":")  
    Characteristic  1 
    0PLANT__0COMP_CODE    Empty   
    Entries marked with red do not have aggregation authorization
    You can find more information about this here 1140831
      The authorization check stops here as this selection is no longer needed  
      Message EYE007: You do not have sufficient authorization  
      No Sufficient Authorization for This Subselection (SUBNR)  
    Following CHANMIDs Are Affected:
    51 ( 0PLANT )
      Authorization Check Complete  
    Please let me know the reason for the same.
    Also How can  i track these  changes to avoid such errors
    Regards,
    Ajit

    Hi Ajit,
    The authorization log has been improved constantly and try to make it easy to understand.
    It says:
    Authorizations missing for aggregation (":")
    Characteristic 1
    0PLANT__0COMP_CODE Empty
    Entries marked with red do not have aggregation authorization
    You can find more information about this here 1140831
    So please click the "1140831" which is a hyperlink bringing you to OSS note 1140831.
    The note says:
    1140831  Colon authorization during query execution
    Part 1:  Description of the authorization check
    You require aggregation authorization ("colon authorization") to view
    the values of an authorization-relevant characteristic in aggregated
    form. What does this mean exactly?
    Example:
    The calendar year (0CALYEAR) characteristic is authorization-relevant
    and is contained in the InfoProvider that is in use. You defined a query
    as follows:
    1.  0CALYEAR is in the free characteristics (not in the drilldown)
        without any selections
    - or -
    2.  0CALYEAR does not exist in the query at all.
    In both cases, no 0CALYEAR values are displayed in the query. Also, the
    query is not restricted to any 0CALYEAR values. A colon is required for
    the authorization check in this situation.
    The note contains some more detailed explanation. You could read through it to understand the concept.
    Regards,
    Patricia

  • Authorization error  while regestring developer in SSCRkeys

    Hi All,
    iam trying to register developer in SSCR keys to generate acess key .
    iam getting  authorization error
    How to  Register SSCR keys  authorization.
    pls help me out ....
    solutons appreciated
    John

    Hi juan,
    iam getting Authorization Error!
    Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
    do i need to register for sscr authorization.
    solution appreciated
    Regards
    John

  • Error while migrating transfer rules

    Hi all,
    When migrating <b>2LIS_02_SCL</b> transfer rules to transforamtions I got a shotdump "ASSERTION_FAILED  in 'CL_RSTRAN_TEMPLATE->CREATE_ROUTINE" for this I have implemented Snote : 986199  after this when I am migrating transforamtions are getting created but showing syntax errors (for this transfer rules there are standard routines ) .Can anyone help me to sort out this issue.
    Regards
      KK

    Hello,
    unfortunately not all transfer rules can be migrated automatically.The migration of the business content transformation is done on customer project base. This means some of the adjustments needs to be done manually.
    Please adjust the rules to the ABAP OO compliance.
    This how to paper should help:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fc61e12d-0a01-0010-2883-e2fc63ef729b
    and
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e73bfc19-0e01-0010-23bc-ef0ad53f2fab
    I hope this helps.
    Michael

  • PCo 2.3 Authorization Error while connecting to MII 14.0

    Hi All,
    We are trying to connect MII 14.0(installed on HP-UX[Unix] system) with PCo 2.3 (installed on Windows 2003 R2 SP2 system). Both MII & PCo servers are on same network. When we are trying to configure the PCo details in MII Data Servers using the link(http://<PCOServerIP:Port>/PCoManagement) , its connecting and we can see the Agents created in PCo. Also when the the PCo connector is enabled in MII, the status is showing green.
    When we try to retrieve the tags using PCo Query TagRetrieveQuery, No tags shows up in MII and an error message is displayed. The MII Log shows lots of errors starting with "Authorization Error PCo". This error shows up when we are configuring the PCo details. To be exact this error shows up after entering the PCo link and clicking on Next button and entering the UserName & Password for the PCo system . Attached is the screen shot of the log error.
    The user-id for the system on which PCo is installed has administrator privileges. The Net. TCP Port sharing services is also started on the PCo server.
    Any other services need to started in the PCo server or anything we missed out? Is there any another service which needs to be activated for Web service?
    PCo is connected to OSISoft PI using PI SDK 1_3_6_364.
    We have tried applying SP's available for PCo 2.3 and still facing the same issue. In-fact we are facing more issues when we apply SP's for PCo. The tag list which shows up on PCo during Subscription Items > Browse, reduces and only few tags which are not required gets displayed in PCo.
    MII Version   : 14.0
    PCo Version : 2.3
    Any suggestions would be greatly appreciated. Thanks.

    Hi Rohit,
    Sorry for the delayed reply. I already checked by ensuring the PCoManagement host and Agent instance services are started. I can see the status as Running "green" when the PCo data server is enabled at the MII end. But the problem is, no tags shows-up in the PCoQuery TagRetriveQuery mode. The logs start with this Authorization Error PCo "You do not have permission to access the Web Service". The PCo Server user-id has local Admin rights.
    Is there any other specific service need to be activated?
    Regards,
    Jeedesh

  • HCM Forms&Process :Authorization error while opening work item in the UWL

    Hi,
    The process has been started successfully and the work item was appeared in the  UWL of MSS.
    But when I try to open the work item  , I got the following errors:
    "User XXXX doesnot have authorization on pernr 8000123"
    "You are not authorized to process this process"
    When I checked, the User XXXX has the required roles for authorization such as SAP_ASR_MANAGER and SAP_ASR_EMPLOYEE and the authorization object P_ASRCONT has been assigned to it as well.
    Still why these errors are coming?
    Does anybody know about it?
    Thanks & regards,
    Lek

    Hi,
    I have had exactly the same error. Make sure you have read the help.sap.com documentation carefully:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/43/3d8f8118391bcbe10000000a1553f7/frameset.htm. The minimum requirement is access to one infotype (it does not matter whether there is data in the infotype and it does not matter which infotype you choose) via CHECK_MIN_PERNR_AUTHORIZATION of BAdI HRPAD00AUTH_CHECK. More specifically, we solved it be providing access to infotype 0002 to all employees.
    Furthermore, check what level of authorizations you have set in the config for the activities.
    IMG->Personnel Management->HR Administrative Services->Authorizations->Define Authorization Method for Activities (All Processes) or Define Authorization Methods for Activities (for Each Process Group).
    This should help you solve your problem.

Maybe you are looking for