Authorization failed when trying to connect Hyperion to BW 7.0

Hello gurus,
Using Hyperion interactive Reporting Studio, I try to access BW cubes.
I select OLE DB as connection type and SAP BW OLE DB provider, I am prompted for a BW system to connect to.
I then get the following error message:
OLE Error: 80040e4d
Error Source: MDrmSAP.2
Error Desciption: Authorization failed.
Using the same BW provider and the same BW user, I am able to connect form Excel.
So I wonder what the problem is.
Help really appreciated.
Alex-

Hi Ingo,
I do not get any error while using the Universe Designer, I get this error when trying to connect a SAP BW related universe in Crystal Reports. There is no problem at all with WebIntelligence by the way. It is possible to connect a SAP BW related universe in WebIntelligence.
I use BO XI 3.0 with Crystal Reports 2008 and the SAP Integrations Kit client components are installed on the client machine.
Nevertheless the BO Enterprise system is not configured with SAP Authentification, but with an own authentification.
Best Regards,
Thomas

Similar Messages

  • WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live

    MTU test fails when trying to connect wirelessly to Xbox360 live.  Firmware is current.   I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable.  Changing the MTU setting does not work.  I have tried several other suggestions found on these boards but nothing seems to work.  Any help would be greatly appreciated!

    hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...

  • Logon failed when trying to connect to a SAP BW related universe

    Hi,
    when I try to connect to my SAP BW related universe, I simply get the error message "Logon failed".
    I have the SAP integration kit for BO. Furthermore I have set the connection appropriate to OSS note 1182409.
    Nevertheless I get this error message.
    The universe and the connection settings to SAP BW themselves are working correctly.
    So e. g. I can set up a connection to my universe from the WebIntelligence tool.
    Do you have any idea to solve this problem?
    Best Regards,
    Thomas
    Edited by: Thomas Seifert on Nov 18, 2008 9:41 AM

    Hi Ingo,
    I do not get any error while using the Universe Designer, I get this error when trying to connect a SAP BW related universe in Crystal Reports. There is no problem at all with WebIntelligence by the way. It is possible to connect a SAP BW related universe in WebIntelligence.
    I use BO XI 3.0 with Crystal Reports 2008 and the SAP Integrations Kit client components are installed on the client machine.
    Nevertheless the BO Enterprise system is not configured with SAP Authentification, but with an own authentification.
    Best Regards,
    Thomas

  • Packet received fails when trying to connect to database

    Dear experts,
    i always received an error message: Packet Received Failed whenever i tried to connect to my 9i database. Once a while i will b able to connect without problem but sometimes is very annoying that i keep receiving this error and i have to retries a lot of time to connect depending on my luck.
    Does anyone have any idea what could be wrong here?
    Many thanks in advance for your advise.

    me, too.
    I installed Oracle 10g for windows on PC1
    and Developer/2000 Forms 5.0.6.8 + sql*net client 2.3.4.0.0 on PC2
    When I tried to connect to database by using SQL*Plus 3.3.4.0.0 the first time to connect is ok (but not fast as normal situation)
    after disconnect the SQL*Plus and tried to made another connection immediately, the [ORA-12637 packet receive failed] appears.
    after sometime, it may be success to connect again.
    I used to disable all Firewall and the problem still happen.
    Any one can help please?

  • Why do I get "Connection failed" when trying to connect to Lion?

    One of our two Macs is running Snow Leopard, the other, Lion. I can connect from Lion to Snow Leopard OK, but not the other direction: when I try, I get "Connection Failed." I can connect as guest however. Ive run Disk Warrior on both machines. No change in behavior. Any one else experiencing this?

    Solution is here: https://discussions.apple.com/thread/3197723
    Go to System Preferences > Sharing > Options...
    Unshare your home folder and then you can connect. Apparently Lion shares your home folder by default.
    Worked for me.

  • Connection failed when trying to connect to external Lacie hard disk

    I have an external Lacie hard disk which sits under and is connected to my Airport Extreme base station. I access that volume by using the 'Connect to Server' option in the finder, and I can see the Lacie drive when I get to the stage where I click to 'browse' and then click the Network icon.
    However, today instead of connecting as usual (after asking for password authorisation, etc.) I now get a temporary window message saying:
    "Looking up, "x1-6........local..." I guess the IP address?
    After 3 minutes I then get the following error message:
    CONNECTION FAILED
    The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
    Yesterday I had a problem with my MacPro while trying to access info on the Lacie volume and with no response from the MacPro to shut down, I had to hold the start button down to get it to shut down. I then turned the Airport Express and Lacie disk off at the main plug powerpoint (I forgot to dismount the Lacie volume from another Mac running!). Hoping this would reset everything, but now this problem has happened!
    Any help or advice on this would be much appreciated as I hold some key financial and business info on the Lacie volume and I can't access it now!!!
    Thanks

    Hi Rick
    That's worked!
    I did reboot Airport Extreme initially (had to switch off power to AEBS and Lacie disk as looks like there is no power switch on the AEBS?...and tried, but same problem. But then tried this again and all now works as before.
    Thanks for your advice and the direct connection tip, which I was considering doing anyway if the conventional route didn't work.
    Phew!

  • "Connection Failed" when trying to connect to another Mac on my wireless network.

    Hi,
    I am having an intermittent problem with the connectivity between my iMac and Mac Pro - the latter is the media server for our house. Occasionally my Apple TV's seem to lose connectivity to the Mac Pro too which is a real pain. Both Macs are running Mavericks and the Apple TVs are running the latest software too.
    If I try to connect to the Mac Pro in Finder on my iMac, the Mac Pro is there but when I click on it I get "Connection Failed". Rebooting both computers seems to fix the problem but is far from ideal when mid way through a film!
    The messages in console on my iMac when I try to connect to the Mac Pro in Finder is:
    14/03/2014 10:20:33.542 sharingd[253]: SDSharePointBrowser::handleOpenCallBack returned -5999
    14/03/2014 10:23:34.180 locationd[82]: could not open write stream for /var/db/locationd/clients.plist
    I'm not sure if this provides a clue?
    Thanks in anticipation,
    Rob

    I've managed to connect OK using Connect as. So at least that part is solved. I will see if I can get any diagnostics as to why the Apple TV drops out.

  • Airport see the drive but "connection failed" when trying to connect.

    Hello everyone.
    I connected a USB drive to my airport extreme. it does show in finder but whenever u try to access it I get the.
    I can also see the drive in airport express utility but nothing shows up in Airport Disk Utility!
    Any ideas???

    Hello all-
    I have the same problem. I have a WD 250GB My Book Drive (FAT32 Formatted). When I connect the drive to the AEBS, I get two problems:
    1) When I select the option to secure the disk with the Airport Base Station Password, and then enter the password when asked, I get an error "User ID and Password are incorrect." However, if I secure it with a disk password, there is no problem.
    2) My drive shows up as a Shared Drive in Finder, and I can read and write to it with no problems. However, it does not show up in the Airport Disk Utility as an Airport Shared Disk. Also, it does not show up in the menu bar either as a shared disk.
    Any ideas?
    Message was edited by: P-Train

  • Connection failed when trying to connect as guest

    One mini works fine, but the other mini and my air won't allow it.
    And I can't find where the settings are different.
    Can anyone help?

    Too bad this solution is hard to find... Let's mark it as solved so others can find it easily.
    Glad it saved you a clean install!

  • I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed.

    I keep getting an unknown error when trying to connect to the store. I ran diagnostics and it says secure link to itunes store failed. I've tried all suggestions from apple and nothing will work.
    Please Help

    I received this email from Apple and this corrected the problem for me...  I only had to reset the iTunes cache
    1) Open iTunes
    2) At the top menu, click File > Preferences (iTunes > Preferences on a Mac)
    3) In the Preferences menu, click the Advanced tab
    4) In the Advanced menu, you should see a button that says "Reset Cache". Please click this button.

  • Logon Failed - Invalid element error when trying to connect to SalesForce

    I had a working crystal reports database connection to salesforce until I installed a Crystal Reports update on my machine.  It is currently running v12.2.0.290 (CR Developer).
    Since the update when trying to connect, I enter my password and salesforce security token to get access to the database but now I receive an error that says:
    Logon Failed
    Details: Unexpected error
    ; nested exception is
      org.xml.sax.SAXException: Invalid element in com.sforce.soap.partner.LoginResult - metadataServerUrl
    Help is resolving this error would be appreciated.

    Hi Ron -- you have installed SP2 of Crystal Reports 2008. You will need to install the FP 2.2 as per this thread -- Crystal Reports 2008 SP2 update to the Salesforce.com connectivity
    Let us know if this solved your problem.
    Thanks,
    Pete

  • Have been using FaceTime for long time with same person, for the last two weeks when trying to connect, we get connection failed message, something change in settings that we should look at?

    Now getting FaceTime failed message when trying to connect with a person that were connecting successfully with up unto two weeks ago, has something changed?

    Take a look around you here in this forum. Many people are talking about having problems using FaceTime. A few users claim to have contacted Apple and Apple says that they are aware of an issue with FaceTime and that they are working on it.
    Some users claim that upgrading to iOS 7 solved there problem with FaceTime. Take a look around the forum and read some of the other discussions.

  • Why do I get a message 'connection failed' when trying to download an app?

    Connection failed. when trying to download an app

    I downloaded Maverick. I have no idea I need an APP.

  • HT2480 hi i am getting message that CANNOT GET MAIL  THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

    hi i am getting message that CANNOT GET MAIL  THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

    Talk to your IT department...
    Or if you're at University, talk to the computer team.
    Most Uni's are using outlook.com as the server connection not mail.youruniversity.edu

  • I keep getting a " the connection to the server failed" when trying to use hotmail

    I keep getting a "The connectioin to the server failed" when trying to use hotmail

    Go into Settings, Mail, Contacts, Calendars, select the Hotmail account and check the account settings. Did you set it up with the Hotmail preset? Has this account ever worked on the iPhone? What other troubleshooting have you done?

Maybe you are looking for

  • SQL Loader Problem with Date Format

    Dear all, I am dealing with a problem in loading data with SQL Loader. The problem is in the date format. More specifically, I created the following Control File: file.ctl LOAD DATA INFILE 'D:\gbal\chatium.log' APPEND INTO TABLE CHAT_SL FIELDS TERMIN

  • Html code for quicktime audio stream

    I am looking for the html code to play mp3-audio files on a website. I used to write it with the <embed>-tag, but this does not work in modern browsers like firefox 8 or opera 11.5. Perhaps someone can help me. Thanks in advance.

  • TS1424 How do I dispute an app purchase that I didn't make?

    I received a charge for 3 apps that I didn't purchase...what do I need to do to resolve this? Thank you,

  • Modify existing query in Discoverer Report

    Hi, 1) I want to put an outer join to the existing discoverer work sheet query. Is there any way I could do it. 2) I am trying to modify the query by Export and Import options in the Discoverer Desktop and I am getting the below error. All I did was

  • Would the CSS style set to a parent node be inherited to underlying nodes?

    Hi, Would the CSS style set to a parent node be inherited to underlying nodes? With below code, style setting to parent(VBox) is not getting inherited to children(Text). Style.java package style; import javafx.application.Application; import javafx.s