Authorization for Administation ofr oracle for SAP

Hi,
I want to know the transactions & authorizations required to administrate the oracle from SAP frontend.
It is very helpful for me if anyone give me link or tell me from where I can start?
Regards,
Rajesh

Rajesh,
Indeed, you can do very little from the SAP gui as far as administration is concerned. However, you can get useful information on the database status
db02 : Tablespace sizes, history, critical objects, missing indexes
db03: Oracle parameters
db12: Backup logs
db13: Other database administration job logs and scheduling
db17: Configure what is being checked during jobs like database checks
db20: Influence how stats are calculated
st04: Memory information on the database
I hope this helps
Andreas

Similar Messages

Introduction to Oracle for Experienced SQL Users

Dear members,
where can i find the book for "Introduction to Oracle for Experienced SQL Users" on net in PDF format.
please send my if someone....
Muhammad Nadeem
[email protected]
092-0301-8334434

you have to google for it. That's all
"Introduction to Oracle for Experienced SQL Users"

Why SAP is better than Oracle for timber plantation industry

Dear Experts,
I have to prepare a ppt regarding Why SAP is better than Oracle for timber plantation industry? please supply me some precious points that could convince my client to go for SAP rather than Oracle.
I u have a ppt ready for this then please help me by sending that. Pleease help me asap.
Thank u all
Sankhajeet

Hi,
if anyone have any other docs or links on this...please send me...
Thanks in advance
krishna
[email protected]

${com.sap.datasource.default} for a remote ORACLE

Hello!!!:
At the data-source-aliases.xml file are the following lines:
<?xml version="1.0"?>
<data-source-aliases>
<aliases>
<data-source-name>
${com.sap.datasource.default}</data-source-name>
<alias>CAR_RENTAL_POOL</alias>
</aliases>
</data-source-aliases>
I'm using a remote ORACLE instead the default SAPDB and I need to know what I have to put in the place of ${com.sap.datasource.default} (which are the parts of the path or complete name ? where I should look for them?)
Thanks for your time.

Hi Javier,
You need to deploy the jdbc driver and create data source as defined in
Deploy JDBC Driver
http://help.sap.com/saphelp_nw04/helpdata/en/ab/082484173ae045ab8dad8a41d33da3/frameset.htm
Define DataSource
http://help.sap.com/saphelp_nw04/helpdata/en/ab/082484173ae045ab8dad8a41d33da3/frameset.htm
Once you define the datasource, you can use it in your data-sources-aliases.xml
Hope this helps
Thanks and Regards,
Rohit Jaiswal

Good book for Oracle with SAP

We run SAP on Oracle 9.
We lost our dba for oracle / sap.
I am a sql server person and new to oracle.
Can anyone recommend any good books on just oracle or even
something with oracle and SAP ?
Thanks,
Jon
PS: Does not have to be the latest oracle 11 but anything at 9/10. I need to really pick up on using SQLPlus, and understand the files associated with oracle: table spaces, redo logs, archives, etc.

Concepts:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96524/toc.htm
Application developers fundamentals:
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96590/toc.htm
PL/SQL User's Guide
http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96624/toc.htm
Oracle9i Database Administrator's Guide
http://download.oracle.com/docs/cd/B10501_01/server.920/a96521/toc.htm

Alternate for Update Stastics(Oracle) in DB2 for SAP instance

Hi,
We have installed SAP on DB2 database. Can any one tell me alternate of Update Stastics (Oracle based SAP system) in DB2.
Some one suggested me that it is RUNSTAT but I do't know the process and when it should run.
Thanks
Lokendra Kumar

Hi,
In DB13 you will find job action Update Statistics + Reorgcheck all tables for DB2.
If Automatic RUNSTATS is activated then its not required to schedule this job in DB13. If Automatic RUNSTATS is not activated in your Database, then you should have to schedule this Job in DB13.
Refer [SAP Note 434495 - DB6: Maintaining table statistics via transaction DB13|https://service.sap.com/sap/support/notes/434495] to get more detailed information.
Regards,
Bhavik G. Shroff

MaxDB backup through Backint on Oracle for TSM

Hello Gurus:
We are using TSM backint interface for Oracle database. We are in the process of implementing SCM. We would like to schedule MaxDB backup through backint interface for Oracle.
I checked some forums and configured but backint is not recognizing MaxDB parameter file. Please see below parameter file and error logs.
*BSI File:*
BACKINT D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe
INPUT D:\sapdb\data\wrk\backint\sapdb.in
OUTPUT D:\sapdb\data\wrk\backint\sapdb.out
ERROROUTPUT D:\sapdb\data\wrk\backint\sapdb.err
PARAMETERFILE D:\sapdb\data\wrk\LCD\maxdb_config.par
ORIGINAL_RUNDIRECTORY L:\sapdb\LCD\sapdata
*Parameter File - MaxDB_config*
STAGING AREA:     D:\TEMP\STAGE1 1024000 KB
FILES PER BACKINT CALL:     2
BACKINT:     D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe
PARAMETERFILE OF BACKINT:     D:\oracle\SCD\102\database\initSCD.utl
HISTORY FILE:     D:\sapdb\data\wrk\BackintHistory
INPUTFILE OF BACKINT:     D:\sapdb\data\wrk\backint\backint.in
OUTPUTFILE OF BACKINT:     D:\sapdb\data\wrk\backint\backint.out
ERRORFILE OF BACKINT:     D:\sapdb\data\wrk\backint\backint.err
MAXIMAL DELAY OF BACKINT CALL:     30
Error Logs:
2010-03-30 17:38:35
Using environment variable 'TEMP' with value 'C:\Windows\TEMP' as directory for temporary files and pipes.
Using connection to Backint for MaxDB Interface.
2010-03-30 17:38:35
Checking existence and configuration of Backint for MaxDB.
    Using environment variable 'BSI_ENV' with value 'D:\sapdb\data\wrk\LCD\bsi.env' as path of the configuration file of Backint for MaxDB.
    Reading the Backint for MaxDB configuration file 'D:\sapdb\data\wrk\LCD\bsi.env'.
        Found keyword 'BACKINT' with value 'D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe'.
        Found keyword 'INPUT' with value 'D:\sapdb\data\wrk\backint\sapdb.in'.
        Found keyword 'OUTPUT' with value 'D:\sapdb\data\wrk\backint\sapdb.out'.
        Found keyword 'ERROROUTPUT' with value 'D:\sapdb\data\wrk\backint\sapdb.err'.
        Found keyword 'PARAMETERFILE' with value 'D:\sapdb\data\wrk\LCD\maxdb_config.par'.
        Found keyword 'ORIGINAL_RUNDIRECTORY' with value 'L:\sapdb\LCD\sapdata'.
    Finished reading of the Backint for MaxDB configuration file.
    Using 'D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe' as Backint for MaxDB program.
    Using 'D:\sapdb\data\wrk\backint\sapdb.in' as input file for Backint for MaxDB.
    Using 'D:\sapdb\data\wrk\backint\sapdb.out' as output file for Backint for MaxDB.
    Using 'D:\sapdb\data\wrk\backint\sapdb.err' as error output file for Backint for MaxDB.
    Using 'D:\sapdb\data\wrk\LCD\maxdb_config.par' as parameter file for Backint for MaxDB.
    Using '300' seconds as timeout for Backint for MaxDB in the case of success.
    Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
    Using 'L:\sapdb\LCD\sapdata\dbm.knl' as backup history of a database to migrate.
    Using 'L:\sapdb\LCD\sapdata\dbm.ebf' as external backup history of a database to migrate.
    Checking availability of backups using backint's inquire function.
Check passed successful.
2010-03-30 17:38:35
Checking medium.
Check passed successfully.
2010-03-30 17:38:35
Preparing backup.
    Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
    Setting environment variable 'BI_REQUEST' to value 'NEW'.
    Setting environment variable 'BI_BACKUP' to value 'FULL'.
    Constructed Backint for MaxDB call 'D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe -u LCD -f backup -t file -p D:\sapdb\data\wrk\LCD\maxdb_config.par -i D:\sapdb\data\wrk\backint\sapdb.in -c'.
    Created temporary file 'D:\sapdb\data\wrk\backint\sapdb.out' as output for Backint for MaxDB.
    Created temporary file 'D:\sapdb\data\wrk\backint\sapdb.err' as error output for Backint for MaxDB.
    Writing '
.\pipe\BACKscd #PIPE' to the input file.
Prepare passed successfully.
2010-03-30 17:38:35
Starting database action for the backup.
    Requesting 'SAVE DATA QUICK TO '
.\pipe\BACKscd' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Back123'' from db-kernel.
The database is working on the request.
2010-03-30 17:38:35
Waiting until database has prepared the backup.
    Asking for state of database.
    2010-03-30 17:38:35 Database is still preparing the backup.
    Waiting 1 second ... Done.
    Asking for state of database.
    2010-03-30 17:38:36 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2010-03-30 17:38:36
Starting Backint for MaxDB.
    Starting Backint for MaxDB process 'D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe -u LCD -f backup -t file -p D:\sapdb\data\wrk\LCD\maxdb_config.par -i D:\sapdb\data\wrk\backint\sapdb.in -c >>D:\sapdb\data\wrk\backint\sapdb.out 2>>D:\sapdb\data\wrk\backint\sapdb.err'.
    Process was started successfully.
Backint for MaxDB has been started successfully.
2010-03-30 17:38:36
Waiting for end of the backup operation.
    2010-03-30 17:38:36 The backup tool process has finished work with return code 2.
    2010-03-30 17:38:36 The backup tool is not running.
    2010-03-30 17:38:36 The database is working on the request.
    2010-03-30 17:38:36 The database is working on the request.
    2010-03-30 17:38:41 The database is working on the request.
    2010-03-30 17:38:51 The database is working on the request.
    2010-03-30 17:39:06 The database is working on the request.
    2010-03-30 17:39:26 The database is working on the request.
    2010-03-30 17:39:37 Canceling Utility-task after a timeout of 60 seconds elapsed ... OK.
    2010-03-30 17:39:38 The database has finished work on the request.
    Receiving a reply from the database kernel.
    Got the following reply from db-kernel:
        SQL-Code              :-903
The backup operation has ended.
2010-03-30 17:39:38
Filling reply buffer.
    Have encountered error -24920:
        The backup tool failed with 2 as sum of exit codes. The database request was canceled and ended with error -903.
    Constructed the following reply:
        ERR
        -24920,ERR_BACKUPOP: backup operation was unsuccessful
        The backup tool failed with 2 as sum of exit codes. The database request was canceled and ended with error -903.
Reply buffer filled.
2010-03-30 17:39:38
Cleaning up.
    Copying output of Backint for MaxDB to this file.
    **-- Begin of output of Backint for MaxDB (D:\sapdb\data\wrk\backint\sapdb.out)--**
                                 **Data Protection for SAP(R)**
                     **Interface between BRTools and Tivoli Storage Manager***
                     **- Version 6, Release 1, Modification 0.0 for Win x64 -**
                           **Build: 358 compiled on Nov 4 2008**
                **(c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.**
        **BKI8310E: The keyword MAXIMAL is not allowed.**
        **BKI1001E: syntax error in file 'D:\sapdb\data\wrk\LCD\maxdb_config.par'. Exiting program.**
        **BKI0020I: End of program at: 03/30/10 17:38:36 .**
        **BKI0021I: Elapsed time: 00 sec .**
        **BKI0024I: Return code is: 2.**
End of output of Backint for MaxDB (D:\sapdb\data\wrk\backint\sapdb.out)----
    Removed Backint for MaxDB's temporary output file 'D:\sapdb\data\wrk\backint\sapdb.out'.
    Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (D:\sapdb\data\wrk\backint\sapdb.err)----
End of error output of Backint for MaxDB (D:\sapdb\data\wrk\backint\sapdb.err)----
    Removed Backint for MaxDB's temporary error output file 'D:\sapdb\data\wrk\backint\sapdb.err'.
    Removed the Backint for MaxDB input file 'D:\sapdb\data\wrk\backint\sapdb.in'.
Have finished clean up successfully.
Any help will be appreciated.
Thanks,
Miral.

> We are using TSM backint interface for Oracle database. We are in the process of implementing SCM. We would like to schedule MaxDB backup through backint interface for Oracle.
> *BSI File:*
>
> BACKINT D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe
> *Parameter File - MaxDB_config*
> STAGING AREA:     D:\TEMP\STAGE1 1024000 KB
> FILES PER BACKINT CALL:     2
> BACKINT:     D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe
>
>     Using 'D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe' as Backint for MaxDB program.
> 2010-03-30 17:39:38
> Cleaning up.
>     Copying output of Backint for MaxDB to this file.
>                                  **Data Protection for SAP(R)**
>                      **Interface between BRTools and Tivoli Storage Manager***
>                      **- Version 6, Release 1, Modification 0.0 for Win x64 -**
>         **BKI8310E: The keyword MAXIMAL is not allowed.**
>         **BKI1001E: syntax error in file 'D:\sapdb\data\wrk\LCD\maxdb_config.par'. Exiting program.**
>         **BKI0020I: End of program at: 03/30/10 17:38:36 .**
>         **BKI0021I: Elapsed time: 00 sec .**
>         **BKI0024I: Return code is: 2.**
>
>     -
End of output of Backint for MaxDB (D:\sapdb\data\wrk\backint\sapdb.out)----
>     Removed Backint for MaxDB's temporary output file 'D:\sapdb\data\wrk\backint\sapdb.out'.
>     Copying error output of Backint for MaxDB to this file.
>     -
Begin of error output of Backint for MaxDB (D:\sapdb\data\wrk\backint\sapdb.err)----
@Markus: thanks for the hint with the quote-formatting option!
Concerning the issue:
Sorry, but you misunderstood the way how the general BACKINT for Oracle interface is used with MaxDB.
See, MaxDB comes with a own BACKINT executable.
This is a enhanced BACKINT tools that allows pipes as data input channels - which is not supported by the Backint for Oracle.
The MaxDB Backint serves as a adapter program between the MaxDB Kernel and the backint for Oracle program.
So instead of
BACKINT:     D:\usr\sap\SCD\SYS\exe\uc\NTAMD64\backint.exe
you should point it to the MaxDB provided adapater program.
I propose to revisit the documentation on that topic [Connecting to a Backint for Oracle Interface |http://maxdb.sap.com/doc/7_7/45/746a5712e14022e10000000a1553f6/content.htm].
best regards,
Lars

Best practice for Web Dynpro for Java to connect to SAP HR

What is best way to connect Web Dynpro for Java application deployed in SAP portal to connect to SAP HR ?
Is it good practice to connect to underlying SAP database ( eg oracle) directly to get the data or is there a better way ?
This below article describes to connect to external DB, however Is there any other way for SAP HR ?
http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproApplciationwithDatabaseMS+Access

Hi,
There are 2 supported ways :
First is to use JCO connections to call abap RFC enabled function modules. (BAPIs for example)
Second is to call SOAP web services (HR enterprise services for example)
You should never access directly database tables...
Regards,
Olivier

Looking for a Web Interface for Editing Data in an Oracle 10g Database

Greetings all!
My organization is implementing Oracle 10g Release 2 Enterprise version. We have an employee who will need to edit data in the database which will hold staff phone numbers, email addresses, and other contact information. This employee will never need to administer the database or develop tables, queries, etc. They will only need to add and remove rows of data and edit text values stored in a database table.
Does Oracle 10g have a built-in, browser-based tool that can be used to edit data in a table via a friendly user interface? If no, can you please recommend an easy to use tool for editing data in an Oracle database?
Thanks for any help you can provide!
Rachel

Justin,
Thanks very much for the tip!
Do you know if Oracle 10g has any kind of built-in tool for editing data? I have heard of "The Vault", but that appears to be a tool for administering database users, reports, etc. I am looking for some kind of tool that shows the data in a grid layout (like Microsoft Excel) and allows someone to edit and save data in that grid. A web-based tool would be best, but a desktop tool (especially if it's already part of Oracle 10g) would also be good.
Thanks again,
Rachel

Use of Authorizations Tab in User Account for Version 10

Whats the use of Authorizations Tab in User Account for Version 10. Please find the snapshot attached.

Hi Pawan,
SAP Sourcing 10 allow custom script and query-based web services which support OAuth authentication so
client consumer application will consume this web service and if the OAuth handshake is done successfully, then we can verify by going to the Authroizations tab of the User Account of the user that signed on to Sourcing/CLM and allowed the external program to access the particular webservice.
For more insights please refer the Web services cookbook of SAP Sourcing 10.
Hope it helps to some extent.
Best,
Kushagra A

No Authorization for release process error for Purchase requisition App.

We have configured a custom workflow for the purchase requisition and we are getting following error while:
You have no authorization for a release process
You have no authorization for a release process [GBAPP_APV_MSG/017] (error)
No exception text available [/IWBEP/CX_MGW_BUSI_EXCEPTION] (error)

Hi Masa,
I have the same problem, I did the test to run a workitem from SAPGUI inbox and works well.
The strategy is defined correctly, but continue with the error.
2015-03-27 17:36:21 The following problem occurred: HTTP request failed400,Bad Request,{"error":{"code":"GBAPP_APV_MSG/017","message":{"lang":"es","value":"Not authorized for release process"},"innererror":{"transactionid":"551461B844396C12E1000000B52A6013","timestamp":"20150327201237.8762600","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/017","message":"Not authorized for release process","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"","propertyref":"","severity":"error"}]}}} -
Please your Help.
Regards,
Francisco.

How to override security for table access when using SAP Query?

We have a number of infosets which use table join between PA0001 and CATSDB table. To execute a query based on such a query you would need access to table auth group PA through S_TABU_DIS. This was earlier not a problem as SAP query was earlier used by support staff and not end users. We do not want to give S_TABU_DIS with to end users as this amounts to givin them access to all PA tables.
The generated code for the query checks for the condition
"%rtmode-no_authchk = space"
before going for the authorization check.
Thus, ideally the authorization check for an InfoSet can be skipped if we can pass X for this variable from the InfoSet definition. Is there a way to do this?
Would appreciste any inputs to help suppress the authorization check at this point. Thanks.....

>
Julius Bussche wrote:
> Perhaps you could replace it with a class of your own (transaction SE24)?
>
> I have not tried to do this; it was just a thought.
>
> Kind regards,
> Julius
unfortunately this does not work. SAP saw fit to 'hard-code' the implementation of the interface in RSAQEXCE:
(only parts of that abap displayed here).
170 data: iref type ref to if_query_tab_access_authority.
1107 *       FORM AUTHORITY_BEGIN
1112 form authority_begin using p_auth_classname type AQS_CLSNA.
1119   perform authority_init using p_auth_classname.
1120   call method iref->access_authority_begin.
well for my part (searching a solution for a query on LTAK, wanting L_LGNUM as an object) i'm out of ideas. i shall have to modify SAP-standard and disable the class and do my own coding in the info-set. no other possibility - i cannot allow S_TABU_DIS for group LA and even if i did, what help would it be - i would have to allow that to all companies in that client having WM - and that would be literally all - i need LGNUM here!

Windows Server 2008 and SQL Server 2008 R2 - ?? for replication with Oracle

Hello:
I am running Windows Server 2008 and SQL Server 2008 R2 - 64 bit
I need to replicate data between the SQL 2008 and Oracle 11.2 ?? with Oracle being the publisher
I also would lile SqlPlus installed on the server.
I need a definite answer as to what I should download from the Oracle download area. There are just so many packages and so many version I dont know what to download.
Thanks

Hi,
Currently Microsoft Windows Server 2008 and SQL Server 2008 are not supported for SAP Business One.
For detailed information about all supported platforms, we have the following link for your reference:
www.service.sap.com/smb/sbo >product availability > supported platforms.
Regarding the information on the service marketplace this is updated on a regular basis and provides the most up to date information regarding the supported platforms for Business One.
Platforms not mentioned in this documentation are not supported.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team

What are the authorization need to be given for a Key Users in BW?

Can you help me out for this question please.
Thank in advance.
Kay
What are the authorization need to be given for a Key Users in BW?

Hello,
check this:
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/content.htm
you can use the template role to dfine your own roles for Key User: S_RS_RREDE BI Role: Reporting Developer (Development System)
Hope it help
regards

Install Oracle for EP6 SP12

Hello, I'm new to portal. I want to know if there are any step by step guide to install Oracle specific for Portal (for example: the character set). Are there any things I need to keep in mind when I'm installing Oracle for portal ? What are the hotfixes or patches I need to install ?
Thankyou.

Hi,
Download the installation guides FOR EP6 under the Netweaver->Release 2004->Installation section of the following link:
http://service.sap.com/instguides
Best Regards,
Srinivas.

Authorization for Administation ofr oracle for SAP

Similar Messages

Maybe you are looking for