Authorization for credit limit - risk categoryu200F

Hi All,
I would like to control field risk category by authorization.
I have configure in Field Groups and assign it to user roles using object
F_KNKA_AEN.
and below for the authorization objects for credit management:
1)V_VBUK_FRE
2)V_KNKK_FRE
3)F_KNKA_KKB
4)F_KNKA_MAN
5)F_KNKA_AEN
But the fields are still not grey out.
Is there any other configurations not completed?
Is there any alternative methods?

Hi,
Take the help of basis consultant and give authorization for display onely then it will appear as gray
Kapil

Similar Messages

Authorization for Credit, Commitment Limit and Payment Terms

It's very required to have authorization for Credit Limit, Commitment Limit and Payment Terms change. Currently it's very hard to control limits as every user can change these values and omit approval procedure or authorization for Confirm Credit Line Deviation and Confirm Debt Line Deviation.

Thanks, You were right. It runs well for the sales order with out delivery. After I create delivery in reference to this sales order and change payment terms in sales order there is no new credit control check.
Is there a possibility to run credit control check after a delivery is created?

Expiraition date for credit limit

Hi all,
can I set an expiration date for customers credit limit?
Business requirement is as follows:
In my company we grant the customers their credit limit every quarter. I want to be sure that only a deliberate action could renew the customers credit.

hi , if every quarter you revise credit limit of the customer, You can define effective dates for credit limit in CREDIT USAGE RULES for a customer, so that when Effective Date To is expired credit limit usage cannot be perfomed for that customer. Hope this could solve your query. please let me know if wrong or right.
thanks.
RAM.....

Table for credit limit for risk category for all CCA

Hi All,
I want to know in which table I can see default credit limit which is associated to particular risk category for all credit control area.
Regards
Nidhi

Hi Nidhi Srivastava,
Check in SE16
KNKA - Customer Master Credit Management
KNKK - Customer Master Credit Control Area Data (credit limits)
Regards
Pradeep

Sales Order Not Checked for Credit Limit

Most of the time, in our course of business, the customer account and BP/Credit limit are setup prior to the input of any order.
However, if in the case the customer was setup (BP created in background, but segment/credit limit not assigned yet), and an order was created immediately the order will not be checked for credit.
We are considering putting a check in the order that it must be checked or it is considered incomplete.
We have a background job that runs every few hours to assign the BP to the credit segment (we have only one credit segment, in addition to 0000) and give a default credit limit. But we need to ensure that all orders are checked.
How are others handling this situation?
Thanks

We have already put in place the use of a background job to create the BP/segment with a default credit limit.
We are hoping to come up with a method that is full proof and not manual.
Depending on how frequently the job runs and the timing between that and setting up a customer master record and entry of a sales order, there could be a sales order entered before the background job was completed.

Query for credit limit of customers of a particular type

Hi,
We are using SAP B1 2007B PL04 and want to activate credit limit so that whenever a delivery or A/R breaches the credit limit then the document must go for approval. However we want this to be activated only when the customers are having group code say 110 and not for others.
So basically could you all help me with a query which would do the following
1. check whether customer for whom delivery or A/R is being generated belongs to group having croup code 110
2. check if the credit limit set in BP master for that customer will be breached if the delivery or A/R is made (ie Current A/R or delivery amount when added to current outstanding will exceed the credit limit)
3. if yes then will activate approval procedure and send the document for approval as per approval template
Thanks
regards
Pradipta

hi Gordon
Thanks for the reply
could you please tell me what does this $[$29.0.number]
signify and
secondly can i add WHERE T1.CreditLine - T1.Balance < $[$29.0.number]
and T1.[GroupCode]=122
as i want this query to only run when the customer belong to a particular group
Also please tell me how do i test this query from query manager
Thanks
Regards
Pradipta

How to consolidate group data for credit limit check

Dear All,
The question came up here how group data (open items, open orders, etc.) can be consolidated for the credit limit check. Is a hierarchy used or other master data ?
E.g.: Customer BASF has various subsidiaries. If a customer from the BASF group places an order with us there must be a check regarding open items etc. of all customers belonging to the BASF group.
Thank you.
Joachim

Create credit limit for one BASF customer in FD32.
Then enter the credit limit for other customers without amount . but in status screen goto edit-change credit acct
credit account - enter the customer number for which credit limit is maintained earlier.
repeat the same for all basf customers
by this credit limit of first customer will be shared by group of customers

Query for Credit Limit Approval Procedure

Hi experts,
Need your help with an approval procedure query. There is already the option to launch when the BP's balance exceeds the credit limit by a set dollar amount. What we would like is for the procedure to launch when the balance exceeds an additional 10% of their credit limit.
Ex: Customer's credit limit = $1,000. We want the approval procedure to kick in when the sales document causes their balance to be >= $1,100. Thanks.

Adding this to the WHERE clause will include the DocTotal
T0.Balance + $[$29.0.Number]
SELECT distinct 'true' FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode] AND
(T0.Balance + $[$29.0.Number]) >= T0.[CreditLine] * 1.1

Enterprise Service Required for - Credit Limit Data

Hi,
Can any one tell me, is there any Web-Service available to the Credit Limit Details in the FD32 T.Code.
Thanks,
Sekhar.J

https://www.sdn.sap.com/irj/sdn/wiki?path=/display/espackages/credit%2bmanagement
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/espackages/creditManagementEnterprise+Services
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/db5a9890-0201-0010-5091-a3c483bbea7d
Hope these links helps.
Thanks,
Parvathy

Delivry/PGI Block for Credit limit

Hi All,
As per my client Credit management Requirement we have configured like ........
For High, Medium and New Risk customer we have configured Automatin credit control at both Credit Group levels 01-Sales Order and 02 - Delivery).
Now based on this at Sales order creation level it is giving the warrning message with value. once i saved the document and release the Credit block I am able to create the Delivery but it is not showing warrning message and it is not blocking the PGI.
My question was as per the configuration (Delivery type has assigned for both Credit groups 02 and 03) it will not work at the Delivery creation lavel once i releases the Credit block at Sales Order level ?
Please let me know your views.....
Thanks & Regards,
Jayalakshmi

Hi jayalakshmi
please check with all the configaration it suppose to work.
check correctly once again in 1) ob01 t.code
                                            2) ova6 t.code
                                             3) ovak t.code
                                             4) ovad t.code
                                             5 ) ova8 t.code
i think last T.code you might have slipped out OVA8
1) credit control area + risk category + credit group 01 =low risk sales orders.
2) credit control area + risk category + credit group 02 =deliveries.
3) credit control area + risk category + credit group03 =post goods issue.
in the customer master also please check credit control are and credit groups aare appring or not.
i hope you have understood.
if it is solved don't forget to reward.
thanks
surya

Who does chase pull for credit limit increase for the freedom card

Trying to increase my Freedom limit I've had the card since April used it heavily payed it off almost in full since then usually after every major purchase I'm wondering if they pull like strictly ex or eq

CAPTOOL wrote:
Yes-Its-Me wrote:
bigalkescott514 wrote:
Trying to increase my Freedom limit I've had the card since April used it heavily payed it off almost in full since then usually after every major purchase I'm wondering if they pull like strictly ex or eq Whatever they pulled for your initial application is what they will pull for the CLI.. It all depends on what bureau is pulled for your region.Well, that sucks. They doubled pulled me, EQ and EX. Both times I applied.For CLI, they will only pull one. Chase will pull EX for most people and during initial application, if they are unsure of the credit profile they pull another bureau. Another thing they do also is, if you do the pre-equal on their site you will end up with a double pull if you proceed to apply after seeing it on their site...

Authorization for credit memo only in MIRO.

Hi,
We need to provide MIRO access to an user who is supposed to do only "Credit Memo".
All other options like Invoice, Subsequent credit/debit are not to be made available to him.
Can this requirement be met with...?
If so, please provide your valuable ideas.
Regards,
Siva

Hi,
this is one possible solution:
MIRO - Subsequent Debit
Best regards.

I want to set dynamic customer credit limit for a customer

Hi,
I want to set a dynamic credit limit for a customer which should trigger during the time of Sales Order Creation.
Can anyone please let me know the settings one has to do to implement this process in the system ?

Hi Below is the whole process for confign.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Regds
MM

T. code for report (Report to Monitor Credit Limit Vs Outstanding)

Please send me in ECC 6.0 T. code for report (Report to Monitor Credit Limit Vs Outstanding)

Try any of these report using se38 for credit limit check.
RFDKLI30 Credit Limit Overvie
RFDKLI40 Credit Overview
RFDKLI41 Credit Master Sheet (complete details)
RFDKLIAB Display Changes to Credit Management
RFDKLI43   Credit Management: Master Data List     (credit exposure limit)
anya

Release log for blocked sales order as credit limit

Hi gurus,
Any body kindly explain for me about how can I look over Release log for credit limit block sales order, Transaction code or report?
thanks.

Hi,
u r trying all these in IDES system or in real time system.
if u r trying to release it in IDES system then go to VKM2 & do the changes.
in real time system only a authorized person can release the block by using the same T.code vkm2.
hope it helps u
regards
dibya

Authorization for credit limit - risk categoryu200F

Similar Messages

Maybe you are looking for