Authorization for Investment Management program positions by Plant Code

Hello!
I am looking for a way to restrict data on Investment Management reports (program positions) by plant code. I found the following auth objects, but none for plant code:
Company code (A_IMPR_BUK)
Business area (A_IMPR_GSB)
Controlling area (A_IMPR_KOK)
Profit center (A_IMPR_PRC)
Persons responsible (A_IMPR_VER)
Any advise?
Cheers,
Alex

Refer BPGE, BPJA.
Regards

Similar Messages

How to process Fisacl year change for Investment Management with Project?

How to process Fisacl year change for Investment Management with Project as measure

hi
check this menu path
Accounting --> Investment Management --> Programs --> Periodic Processing --> Fiscal Year Change

Business content for Investment Management & Travel management

Hi All,
I am trying to install Business content for Investment Management & Travel management, I found the content in 3.x flow with Infosource. once I raised with SAP they also reply with 3.5 flow. I am doubt full to build with 3.5 flow because 3.5 flow SAP support date over on 31.03.2013. SO how they will support. Please put some light if some one have any idea.
Cheers
Anil

Hello Anil,
this community deals with the SAP product 'SAP Landscape Transformation'. Can you pls. indicate in which SAP component you have the issue? I guess that the current community might not be the right one.
Best, Heike

Object Types in User Status profile for Investment managment

Is there any one who has idea about what object types should I select in User Status Profile for Investment management . this is very urgent .
Regards
Rama Shanker Sharma

Dear Ram,
User Status can be maintained in the system as foll
Maintain the Status Profile first in OK02
Status no       Status        Short text         Initial status flag    lowest    Highest
10                  NBU            Not Budgeted             ^                10          20
20                  BUD           Budgeted                                      10          20
in
Status
NBU
maintain the required fields as required by your process requirement
Material purchase order
Material purchase requisition
Partially release project
Release etc
and define each line item weather it should be No influence/Allowed/Warning/Forbidden/No Action/Set/Delete
Repeat the same logic for
Status
BUD
I hope this solves your problem, if not please write in detail your requirement.
Regards,
Vikat Verlekar

An user guide for Investment Management (IM) ???

Hi All,
I'd like to get an user guide for Investment Management (IM).
Could anyone help me?
Thanks

I hope it helps you.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/2a/f9fefd493111d182b70000e829fbfe/frameset.htm

Tables for Investment Management

Dear All,
We need to develop an ABAP report for Budget distribution in investment management in the format specified by the user. The client uses Investment management for budgets in Marketing budgets.
I got tables IMTP, IMPR, IMPU for Investment program, position id etc.
But I could not find the tables where the Budget amounts get stored when we distribute amounts in Tran.Code IM32.
Please tell me the tables where Budget amount, Distributable, Distributed etc get stored when we post IM32.
Reply me soon.
Thank you very much in advance.
Vishnu,
VST-IT.

Refer BPGE, BPJA.
Regards

Authorizations for document management

Hi,
I'm trying to figure out what every authorization means and which effects it has...
I created a new user, gave him all the necessary authorizations to use certain transactions in Document management by making a new role/profile for him
After trying everything out, I still have a few questions:
- with Authorization for change object link (C_DRAD_OBJ)I have the following properties:
Activity: change, display
document type: DRM-DRM
linked SAP object: *
document status: *
I know how to display my object link, but how can I change it? Do they mean with changing the object link, the creating of long text for the link or is there more to it?
- with authorization for document access (C_DRAW_DOK), I can't figure out what the options "Display Application archive" and "Change application archive" mean. Which effect does it have when I choose them? Where do I consult the application archive? What is the application archive? => SOLVED
- Do I also have to give the authorization "Display" when I want to give the authorization to delete something? How can I delete a document info record without displaying it? =>SOLVED
- With "Status dependent authorizations for documents" (C_DRAW_TCS) what do the following options do?
 *change application start (which difference with change?)=>SOLVED
display application start (which difference with display)=>SOLVED
 *request
 *display archive =>SOLVED
 *change archive=>SOLVED
I know it are a lot of questions but I'm making documentation on the authorization profiles of document management and when I figured those few last things out, I can share my documentation with the rest of you...
Message was edited by: Vicky Liesens

Good morning,
Havent been watching this thread for some time now, so please shout if you do have any questions.
Just a quick note on deleting documents:
Setting the deletion indicator will simply mark the DIR for deletion, but, it will still be on the dB.
After you have set the DIR for deletion, you need to run the program "MCDOKDEL", which has a test mode and a real mode.
This program will physically delete the documents that you have marked for deletion.
Regards,
Freddie Botha
www.documation.co.za
SAP DMS, CAD Integration, Data Archiving, Imaging and Scanning and Workflow
[email protected]

Process step for Investment Management

Hi SAP Gurus
Our client is into BOT projects - Build, operate adn transfer projects.
Till the time of transfer the asset is the property of our client. So the client builds an assets, maintains & operates and transfers the rights only after certain years.
For this I am suggesting using Investment Management module but I am not very clear on the process steps right from creation to Investment order for project - build & for operation.
Request you to suggest me the process steps.
Thanks,
Srikanth

Hi,
For more information about Investment Management, click the below link.
http://help.sap.com/saphelp_47x200/helpdata/en/2a/f9f273493111d182b70000e829fbfe/frameset.htm
regards,
Venkatesan Anandan

A SAP guide for Investment Management?

Hi All,
Could anyone show me where I can find a SAP guige (customizing and/or user) for the Investment Management (FI-IM)?
Thanks
Gandalf

Hi,
Go through the below link :
CONFIG:
http://sapdocs.info/sap/fico/sap-investment-management-configuration/
HELP:
http://help.sap.com/saphelp_46c/helpdata/EN/fd/45add69d6411d189b60000e829fbbd/frameset.html
VVR

Authorization for extending materials master to a plant.

I want to give the authorization for extending the the existing materials to a particular plant. I dont want that this person should change any thing while extending the same.
How can i do that
Atul

if you extend something, then you do not get the screens that are already maintained, hence one can just enter new values when doing MM01.
If the same user has MM02 change rights, then he can go into this material and can change anything for what he has authority.
If you dont want that a user who is extending e.g. accounting views shall have the possibility to change the basic data view, then you must not give him autorization for this view . for this you have authorization object M_MATE_STA

BW for Investment Management

Hi all!
Can anybody say about integration between BW and Investment Management?
I have no information about this.

Hi Dmitry,
Please, refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/en/4c/10193c66f5dc1ce10000000a11405a/frameset.htm
Regards,
Eli

Authorization for cost centers in KSV8 allocation T-code

Hi all,
I know it is possible to set an authorization in allocation T-code KSV8 based on the cost center. In the KSV8 transaction, there is a sender, a receiver and obviously in my case the sender is different to the receiver. The following step for me is to identify the possibility to make an authorization for the partner cost center (which is the receiver). The authorization is for the modification of the allocation. Can anyone help me?
Thanks in advance
Cheers
Pascal

To complete my question, in fact I need to identify an allocation table which makes the difference between the sender and the receiver. Tables marked "T811" are allocation tables...thanks for your help
Pascal

Mass authorization for Property Manager (PN) module

Hello,
We are examining this module in a 12.1 environment and are wondering if there is a way to mass authorize Payment Schedule lines that will be exported to AP. We are using a 3rd party system currently to manage 900+ leases and so far it looks like we would need to click the Approve button for each lease, and do so each month. The authorize screen is found in the seeded responsibility menu path Leases and Documents->Payments->Authorize. If there is not a seeded Concurrent request that is run, could one be easily developed?
Thanks for any insight.
Ryan

Hi Ryan,
You can run the seeded "Approve or Cancel Approval of Schedules" program to authorize/approve multiple schedules. Based on the parameters entered by you, qualifying draft schedules will be approved. You can use the same program to un-approve schedules (in case you inadvertently approve some schedules).
After approving, you can either use the Export to Payables screen OR run the "Export Payment Items to AP" concurrent program to export eligible items to AP.
Regards,
Mukul

Looking for "file management" program

All,
I am a collector of hundreds and hundreds of magazines, articles, etc. In recent times, I've been scanning articles from magazines and school books to digitize them.
I'm looking for a program that will allow me to "tag" files and file them accordingly (sort of like del.icio.us).
Any ideas?
Thank you,
Lindsay

LindsayB63,
Well, other than third-party software (and you have already received at least one recommendation there; will probably receive several more), a few things come to mind.
Off the top of my head, you could "tag" the resultant files with comments, or at least creative names, place them all in a central library (perhaps sorted into folders alphabetically or otherwise), then create a collection of "Smart Folders" to sort/show them according to specific criteria. You could have "standard" smart folders that are persistent, or you can use Spotlight at any time to create an "off-the-cuff" search for a particular criterion, or criteria.
In the end, your searches will only be as good as the system you develop when adding comments/keywords (given that your scans are probably images, not the results of OCR software). Which brings up another subject. If searching this content is important enough, you might want to invest in good OCR software, to convert the scanned images to real text. This text could then be searched directly, instead of second-hand via your comments and keywords.
Scott

UME authorizations for Identity Management

HI:
In order to set up access to allow users to access RAR, I have been placed in GROUP: Administrators in the UME. This provides me the access to go to the Identity Management area and administer users. However, it also allows me acces to EVERYTHING in the SAP Netweaver (WAS).
I would like to create a group called "Security Admin" and restrict it so that I can only access the User Management link. Does anyone know how to do this? I can create the group and assign it to myself, but where do I define what actions are allowed....based on group?
It is very different than adding or removing "actions" from a Role.
When I look at the Administrator group - I do not see where the access is defined so I assume it is hardcoded somewhere.
Thanks,
Margaret

Question figured out. Please ignore.

Authorization for Investment Management program positions by Plant Code

Similar Messages

Maybe you are looking for