'Authorization for replace' sy002

SAP System gives me this error in debbuging mode. I suppose it is something related to authorization when modifying the content of variables (which is what I was doing).
What would be the problem ?
Thanks in advance.

> The message is 'No authorization for replace' - message type sy002.
I am not logged on and still dont know which program you are debugging... The system might be throwing an error message which does not relate to the real cause. Unlikely... Most likely an authorizations issue. If I may be honest with you (no offense!) if you do not know which object controls debugging and what it does to a SAP system..., then I would personally not give you debug authority in a system (I also do not have any debug authority - it was removed from my roles at my request). Only in some lab systems... (an one or two temporary exceptions).
> The change mode is not activated however I am supposed to be able to debug a program in Test System even changing the value of a specific variable defined in the program. In fact, I am allowed to debug the program but I can not change the value of a variable in debugging mode. (Perhaps it is because of the change mode status). That's why the system is showing me the error.
So you cannot activate the change mode? Are you setting a break-point, a watch-point or are you running a it from the start in the debugger? Are you executing it in the debugger from the tcode, or from Se38 etc? It the "productive" test client, the system might also react differently (which release are you on and which SCC4 settings does that client have?).
> Is it possible to change the authorization without having to make any more changes in the System?
Don't do that. I would reject the development and ask the developer to join you for the debugging session to see why those variables are incorrect. Your debugging mthod (or mode) may be incorrect (likely), or, the developer will have to go back to the drawing board in a development system or sandbox (sort of equaly likely, depending on the developer).
> The change mode can not be activated instead I want to grant access in order to be able to change the value of some varibles defined to see the results given.
See above. Besides that, the developer should ideally have handled those exceptions so that you do not get an incorrect variable; you only get an incorrect output in display mode (and send their code back for a rework, or invite them over...).
Hope that helps, sorry for the many questions...
Julius

Similar Messages

Authorization for certain warehouse in stock transfer

I'm trying to create an authorization for stock transfer when To Warehouse equals a certain value. Is there a way to do it?

Hi,
How could I do it with an approval procedure?
You can create approval stages and template by using query
Is it with a query?
Yes
Will it be similar to a formatted search?
Yes
Try this query for row level with only one item.
Select Distinct 'True' FROM OWTR T0 inner join WTR1 T1 on T0.docentry = T1.docentry
Where $[$23.5.0] = 'ExScrap'
Note: Replace Exscrap with your warehouse name.
Thanks & Regards,
Nagarajan

Fix authorizations for the budget approval flow (internal orders)

Hi,
I need to fix the authorizations for the budget approval flow.
What do I need to take into account?
Thank you.
Kind regards,
Linda

(1) Each appropriation request should be attached to an investment program (leaf) position. To update the approved budget on the investment program from time to time, you should
    - make a plan rollup from the appropriation requests to the program positions via IM34 (use an appropriate status selection profile on the initial screen of IM34 and select appropriation requests only to make sure that
       > only appropriation requests
       > with status 'Approved' are taken into account),
    - To budget the investment program via IM32, set view 'Planned total' (Menu: 'Views -> Planned total') and copy this view, which contains the latest approved budget amounts, to the "real" budget (Menu: 'Edit -> Select -> Select all' and then 'Edit -> Copy view').
(2) You can even generate an order from the appropriation request that enherits the appropriation requests plan value. For details see SAP Library (Menu: 'Help -> SAP Library'), path 'Financials -> IM Investment Management -> Appropriation Requests -> Replacement by a measure for implementation'. Analogously to step (1), you can also take over the orders 'Planned total' view into the orders budget via txn IM52.
If you strictly limit the authorisations to execute IM34, IM32 and IM52 as pointed out in steps (1) and (2) to a handful of people who execute these functions as pointed out above (withoud adding or removing budget arbitrarily, of course), the budgeting process
really focusses on planning/approving appropriation requests which is fully accompanied by the approval workflow.
Hope above helps you.
Regards
Siva

Authorization for Delimit / Lock button in PA30 screen

Hi All,
I have a requirement that users should not be able to Lock the leave record in IT2001. The user has authorizations for Read / Write and Display.
Also I do have a requirement that the user should not have authorization for delimit button. The user has authorizations for Read / Write and Display.
Do we have any authorization object for delimit / lock ??
Any Input will be highly appreciated.
Shrikant Basarkar

It's a hardware issue. If it's out of warranty, you can get it replaced but there's an out of warranty fee associated.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

BI7 InfoObject Value Level Authorization for Queries

Hi Guys/Gals,
this is my requirement.....
we have a HR ODS which has personal information of employees from 72 Companies.
we have a query based on this ODS ....
My requirement is when User A runs the query only data from Company A must be displayed...
and when User B runs the same query only data from Company B must be displayed....
no pop-ups for the company code .....
i posted this question yesterday & got a few replies....i tried them out... but there is this issue...
i used the RSECADMIN & created the AO which includes the 0COMP_CODE....
then i added it to the role using PFCG....
when i add the AO i created in the " BI Analysis Authorizations: Na " section...
the query gives a "no authorization" error.....
then one of u guy asked me to add it in to the
"SAP Business Information Warehouse - Reporting" section,,,, so i did that....
but unless i also add " BI Analysis Authorizations: Na " with * the query doesn't work....
and when i add " BI Analysis Authorizations: Na " with * &
"SAP Business Information Warehouse - Reporting" with the AO i created...
the filter doesn't work... it displays all the data
please help me.....

Hello Christopher,
your thread is a little bit confusing and unclear. I just had a look at the other two threads you posted and here are my comments:
Prerequisite for the use of BI 7.0 analysis authorizations:
- each user needs authorizations for the three special dimensions (0TCAACTVT, 0TCAIPROV and 0TCAVALID) otherwise queries won't run!
As a consequence you will have to create analysis authorizations like this:
ZCOMP_1000
0COMP_CODE I EQ 1000
0TCAACTVT I EQ 03
0TCAIPROV I EQ your HR DSO
0TCAVALID I EQ *
ZCOMP_2000
0COMP_CODE I EQ 2000
0TCAACTVT I EQ 03
0TCAIPROV I EQ your HR DSO
0TCAVALID I EQ *
You can then assign these authorizations directly to your specific users using RSU01 or you will create a role and add the authorization object S_RS_AUTH with value ZCOMP_1000 and another one that contains S_RS_AUTH with value ZCOMP_2000.
Of course your users will need authorizations for standard reporting such as S_RFC, S_RS_COMP, S_RS_COMP1.
S_RS_ICUBE, S_RS_ODSO, S_RS_MPRO, S_RS_ISET are not necessary any more for reporting because they were replaced by 0TCAIPROV in the analysis authorization.
Finally the query selection must be COMPLETELY be a part of the user's authorizations. This is best done by an query variable that is filled from the user's authorizations at runtime.
Good luck,
Petra

Problem with Authorization for Planning folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
we are not pulling the data from any other server, all the data is on the sif any one has faced the same issue let me know.
Regards,
Abraham

Calling Thru Trans code: BPS0 in ECC 6
getting this error:
Error while calling up RFC
Message No. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"An error occurred during the receipt of a complex parameter."
after i check in bw trans code:st22
Following this error message:
Category                   Internal Kernel Error
Runtime Errors         PARAMETER_CONVERSION_ERROR
Application Component BC-MID-RFC
Short text
    An error occurred during the receipt of a complex parameter.
What happened?
    During a remote function call, an error occurred while converting
    a complex parameter.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    An error occurred during the conversion of a complex parameter.

Problem with Authorization for BW BPS planning Folder

Hi an having a problem with providing authorization for a planning folder
i am getting the following error when i test it with test user
Error while calling up RFC
Message no. UPC202
Diagnosis
You have selected a function, to execute this the system must set up an RFC connection to another SAP System. However, setting up this connection was not successful. The following internal error message was generated:
"You do not have authorization for InfoCube ZT_MR_T "
Procedure
Inform the system administrator.
if any one has faced the same issue let me know.
Regards,
Abraham

HI ,
I Checked it out we dont have that cube in our system.
Regards,
Abraham

Authorization for opening & Closing posting periods - OB52

Hi,
Is there any way to set authorization for opening & closing of posting periods in OB52?
My scenario:
I have 2 company codes - A & B assigned to 2 different posting period variant - say PPA & PPB.
The user belonging to CoCd A should not be able to open/close posting period of CoCd B and vice versa.
Is this possible through any authorization settings?
Request your help on this.
Regards,
Sridevi

Hi Sridevi
Please go through the following:
You can assign authorization groups for permitted posting periods. This means that, for example, some posting periods can only be opened for particular users within monthly or annual closing. You can only assign the authorization group at document header level and it only affects period 1. The authorization object is called F_BKPF_BUP (Accounting document: Authorizations for posting periods). Read the corresponding chapter on "User maintenance" in the "Assigning authorizations" topic.
"User maintenance"
Due to the modular authorization concept of the system, you can define authorization profiles which are tailored to the workplace of your employees. You can, for example, assign authorization to a workplace in the Accounts Receivable, Accounts Payable or General Ledger Accounting areas.
By assigning authorizations you define which business-related objects your employees are allowed to process and which editing functions are allowed.
In the following activities for authorization management, you must carry out the following for employees who are to work with the system:
Assign authorizations
The authorizations are assigned by specifying permitted values for the pre-defined objects.
Define profiles
In the SAP system, authorizations are grouped together in workplace profiles. Therefore one or more profiles must be allocated to the individual employee in the master record.
I hope this helps.
Regards
Kavitha

Report for replacement stock to be recived from vendor

Hi
I HAVE ONE ISSUE ON ABOUT VENDOR REPLACEMENT STOCK REPORT
EX:.. i have done GR for material-A qty 100...and ihave done MIRO for this ..pur.order..
after 20 days i have return the materai-A ..qty 25..(without cancel the MIRO) with movement tuype 122..but this material should be return from vedor.(subsequent deliver).after some days or weeks ..( bcoz money has already paid to vendor)...like this we many materials ..
for this... i want report for replacement material will be recived from vendor
regards
sesidhar

Hi
already i have done MIRO..
then return to vendor qty 25..(through MIRO...w/o creadit memo
thne again recive the replacement material ..through MIGO (subsequent delivery)
in this case ..need to create credit memo..?
if yes.. pls...send me procedure.
regards
sesidhar

Authorizations for materials and material groups

Hello experts,
Is it possible to limit the authorization to make purchase requerisiton of some materials or material groups depending on the user?
I heard that it is possible be able to update some materials using the authorization M_MATE_MAT and including them in the material master, material group and user. But this also works for the creation of purchasing documents (PR,PO,RFQ,...)? Do I have to include this authorization for all the materials? If they do not have I understand that works for every people.
Thanks in advance for your help
Best regards,

Hi Madii,
actually Authorization works at the object level, i.s if you have provided the authorization for the user to makePR with certain Material Grp, then if you dont define that grp in the PO role, but still user will get the authorization from the PR role.
why you want to allow the user to make the PR of certain Mtrl Grp for which he should not be making the PO.
or let a different Body take care of the other mtrl Grp.
Hope it helps.
Regards,
Yawar Khan

Cancel a SD invoice error message "no authorization for transaction FB08"

Hi Gurus,
I am trying to cancel a SD invoice and am receiving the error message " no authorization for transaction FB08" is coming. Never has this happened in past, i have checked all the security authorizations also and they are in place. Accounting document status is showing as not cleared. Also, as per my understanding cancellation of invoice happens through VF11 which does not calls FB08. Please point out reasons as to why this could be happening and the possible solution thereof.
regards
Anmol Pareek

Hi Anmol
Once you got the error screen, immediately after that goto T code SU53 and expand all link. Take the screen shot and send it to your BASIS team to provide you proper access.
Yes you are correct cancellation is done through VF11 but sometime some programs internally calls other T codes.
take help of your basis team.

BW report authorization for restrict cost center

dear all,
i have problem on BW report authorization for restrict cost center.....when i execute the query, after selection screen, appear error message 'you cannot change zv_cctr for characteristic 0COSTCENTER during query'.
note : zv_cctr is variable restriction for costcenter, type processing = customer exit.
below the customer exit :
WHEN 'ZV_CCTR'.
    IF i_step = 2.
      DATA : gt_mstuidvscc TYPE TABLE OF ztbw_mstuidvscc,
             gs_mstuidvscc TYPE ztbw_mstuidvscc,
             wa_final2(10) TYPE c.
      SELECT * FROM ztbw_mstuidvscc INTO CORRESPONDING FIELDS OF TABLE gt_mstuidvscc
        WHERE userid = 'sy-uname'.
      LOOP AT gt_mstuidvscc INTO gs_mstuidvscc.
        wa_final2 = gs_mstuidvscc-kostl.
        l_s_range-opt = 'EQ'.
        l_s_range-high = wa_final2.
        APPEND l_s_range TO e_t_range.
      ENDLOOP.
    ENDIF.
Regards,
Tony

i defined variable as ready for input and mandatory.
regards,
Tony

How to set authorization for BW Workspace in backend and Portal ?

Hello Expert,
                     I have developed one BW Workspace in development environment . I have some query regarding BW workspace authorization for access in portal . Some of the queries are as follows:
1) How many composite provider we can build up inside of one workspace that we can go by Tcode ---RSWSPW ?
2) After activating the workspace it shows in RSWSPW ,but this workspace/composite provider will be available in Info Area(in RSA1) or some area else from where we can see this ?
3) Now our requirement is like that -- we have to provide some workspace for SD power user ,Finace Power user & Marketing Power users, in this situation how can we put authorization in bw workspace like SD power user should not see the FI Power user's & Marketing Power user's Workspace rather than his own workspace ?
4) In our requirement, we are going to produce some bex query on top of bw worksapce composite provider . For creating this query ,we searched provider by puting provider name directly in serach option , but is there any option to search the bw worksapce related composite provider by putting info area name in query search ?
5) In another senerio, we gone to create BO AA OLAP report on top of bw workspace composite provider but in source option we cant see the provider ,infact we could not search the composite provider in search option in source selection ----   do i need to navigate any step in compostie provider to make it enable for BO AA OLAP creation on top of composite provider ?
Expecting and appreciating your guidence and suggestion asap .
Thanks & Regards,
Surajit Pal

Hello Expert,
                 Do you have any idea regarding below questionaries about BW Workspace ?
1) How many composite provider we can build up inside of one workspace that we can go by Tcode ---RSWSPW ?
2) After activating the workspace it shows in RSWSPW ,but this workspace/composite provider will be available in Info Area(in RSA1) or some area else from where we can see this ?
3) Now our requirement is like that -- we have to provide some workspace for SD power user ,Finace Power user & Marketing Power users, in this situation how can we put authorization in bw workspace like SD power user should not see the FI Power user's & Marketing Power user's Workspace rather than his own workspace ?
4) In our requirement, we are going to produce some bex query on top of bw worksapce composite provider . For creating this query ,we searched provider by puting provider name directly in serach option , but is there any option to search the bw worksapce related composite provider by putting info area name in query search ?
5) In another senerio, we gone to create BO AA OLAP report on top of bw workspace composite provider but in source option we cant see the provider ,infact we could not search the composite provider in search option in source selection ----   do i need to navigate any step in compostie provider to make it enable for BO AA OLAP creation on top of composite provider .
Appreciating your early responds and thanks in advance .
Regards,
Surajit

Report S_ALR_87013105 : no authorization for the report/ table 7KU6_001

Hi Gurus,
While executing the program S_ALR_87013105 (Detailed Reports
For Sales Order : Plan/Actual Comparison ) system showing the selection log.
"Have no authorization for the report/table 7KU6_001 and 7KU6_002".
But for the user the authorization check through SU53 was successful.
Pl can any one suggest on this issue.
Thanks in advance,
Vijay

Hi,
Contact your basis consultant to provide the missing authorisation. This is one of the authorisation object.
Regards,
Sankar

Problem wih analysis authorization for two scenarios on same data provider

Dear all,
I am looking for a solution on the following authorization scenario (using the new analysis authorization). Unfortunately everything that I tried did not work out as expected:
User A is allowed to manually access query 1 (based on cube A) with authorization on all sites A-Z
The same user A shall get an email distribution automatically (derivation of the filter in the query out of the authorization) for query 2, which is as well based on cube A, but this time the authorization shall be limited only to site A.
As both queries are based on the same infoobject (0PLANT) and the same infoprovider (0TCAIPROV) I always get the result for all sites A-Z. The 0TCAACTVT is in both cases 03 (display), so I have no chance to distinguish between reporting and email distribution.
Probably the only chance would be to derive the values for the email distribution scenario not from the authorization directly, but using a customer exit to fill the filter - but I would prefer a "standard" solution...
Any ideas??
Thanks,
Andreas

Dear Andreas,
Before give you an alternative for you problem, Iu2019d like to comment the combining authorization concept:
http://help.sap.com/saphelp_nw70/helpdata/EN/46/98cd87f37d19ace10000000a11466f/frameset.htm
For this reason I suggest you which combing restriction through authorization and query filter. For query 2 try to use in 0PLANT characteristic the single value u201Csite Au201D, this restriction give you only authorization for see this value.
Otherwise, you have to use customer exit.
I hope that alternative help you to find a solution,
Luis

'Authorization for replace' sy002

Similar Messages

Maybe you are looking for