Authorization groups in MM01

I'm trying to restrict material creation by material type, but with no positive results.
First I created an authorization group via SE54 and then asigned it to the material type via T134. Then I add the authorization group in object M_MATE_MAR to the role but this didn't work.
I appreciate your help!
Thanks in advance.
Rosina Fernandez

Hi Rosina,
Just to clarify, do you want for the role in question to only allowed creation of material of type "WERB" in group "ZMM1" and no other material types?
if so, the other materials types also need to be added to a authorisation group. If no authorisation group is assigned to a material type, that material type will not be checked for M_MATE_MAR access.
i.e. assign materials types that shouldn't be created by this role in group ZMM0 and provide access to this group in roles that should be allowed.
Hope this make sense.
John.

Similar Messages

  • Authorization group in material

    Hi,
    Where can we found the field "authorization group" in the material MM01 .
    In OMS9, the field MARA-BEGRU depend on the field selection group and it's defined as a requierement entry. But, I can't found this field in the MM02.
    Thanks in advance for your help.

    The Authorization group field is available in Basic data 1 of material master, at "material authorization group" section of the screen.
    (I checked at ECC 6.0 - R/3. It may be different for IS retial etc)

  • Assign posting periods to authorization group in tcode S_ARL_87003642

    Hello,
    I want to restrict posting periods for some users. Therefore, I have created 2 functions associated to 2 authorization groups.
    In transaction S_ARL_87003642, when I try to assign different posting periods to each authorization group to the same company code (Posting Period Variant) it appears a message saying u2018Target key must be different from source keyu2019.
    What am I doing wrong? Do you know how can I restrict posting periods for some users?
    Thanks and regards
    Ana Rita

    Dear,
    You simply have to define authorisation groups in OB52 and assign this group to F_bkpf_bup in SU01 against user proflie as desired. Take basis help.
    Regards

  • Authorization Group for G/L Account

    Hi,
    What?
    - I wish to restrict the 'posting' of a G/L account to be done by certain users only
    How?
    - What I have done was...
    a) From FS00, I have added a free-text (BANK) into the Authorization Group for a G/L account
    b) From PFCG, a new role was created to allow these 2 Authorization Objects, F_BKPF_BES and F_SKA1_BES
    c) 'BANK' was entered for the Authorization Group for both these 2 Authorization Objects
    d) From there, I have assigned this new role to the user that I wish to allow Posting of the G/L account
    Problem?
    - Other users still can do Posting for this G/L account
    - Any steps which I have missed out here or done wrongly?
    Thanks,
    Brandon

    Hi,
    Some other roles of the users may override and cause the users to post against this GL account.
    Check all the roles relevant for the restricted users. 
    Use SUIM t-code to find if the auth object mentioned above is included in any other role.
    If it be, restrict that again.
    Generally if one role as no restriction against this auth and not all, this issue tends to happen.
    Regards,
    Sridevi

  • Restrict Vendor line items display by Vendor authorization group

    Hi Gurus,
    I have a requirement to restrict Vendor line item diplay for Tcode FBL1N, I have updated the Authorization object F_LFA1_BEK, its work fine if all the vendors have authorization, However it also display vendors whose auth. group is "BLANK" or "SAPCE",
    Is there a way that I can slove this issue, is there any SAP notes of other object which needs to be updated ?

    Hi,
    this problem has been discussed on this forum last week. Basically, SAP does not perform authorization check if the authorization group is blank. Hence you need to assign authorization object to all vendors.
    Cheers

  • Authorization group in GL A/C

    Hi,
        I have a role that has the authorization group in the authorization objects  F_BKPF_BES , F_SKA1_BES  updated only with 'AUTH' but the same role is also able to access GL accounts with authorization group 'REST'.
       I want to restrict the role to access GL Accounts only with authorization group 'AUTH'.
    How to do it.Kindly advise.
    Thanks.

    GL account Authorization
    Re: How to create authorization groups for G/L Accounting
    Thanks
    Javed

  • Authorization group in GL A/C using FB01

    HI, We have  activated the authorization Group in GL A/c. Using the authorization object F_BKPF_BES we were able to create restrictions on other tcodes like F-28 . However when using the u201CFB01u201D tcode, the authorization check does not have any effect. I have already check the authorization in SU24 for fb01 and status is set to YES. I have also created a trace(using ST01) for this transaction but ST01 does not show any authorization trace for F_BKPF_BES.

    Hello,
    Authorization object：F_BKPF_BES should be checked when you run FB01.
    In your case,please try to check the following points:
    1.Authrization group was assigend to G/.L master data correctly.
    2.Authrization group  was assigend to object：F_BKPF_BES correctly.
    3.Avtivity was defined in this object correctly.
    4.Role was assgined to user correctly.
    5.SAP_ALL authorization was deleted from the user profile.
    Note: it is impossible to define the authorization group as '  '(space) in object：F_BKPF_BES,
    if '  ' was defined, system will consider there are no any setting existed.
    Hope the above infor. could help you to solve this issue.
    Best Regards,

  • Creation of Authorization group

    Hello All,
    I have a requirement from FI consultant for creation of new authorization group. This auth. group we want to use in FI objects like F_BKPF_BEK. so that for few end users they should not change any vendor data in FK02.
    I have gone through several posts, but not able to get / understand clear steps for creation of auth group and assignment.
    One of the post i found is below:
    [How to create Authorization group;
    i tried to do few steps but not in right direction. Request you some one please suggest me the steps for cration.
    Rgds,
    Durga.

    Julius,
    Thanks for the update. As suggested by you i have inserted one entry of auth group in TBRG table against FI object with SE16.
    Now how do we maintain the view of V_TBRG. Is it from SE11?, if yes then i should do this step from ABAP login.
    But what i heard is, this activity is purely involved by Basis people.
    Please suggest.
    Rgds,
    Durga.

  • Customer Master Data and Line Items Balances Display - Authorization Group

    One autorization group was created and assigned to some customer masters in General, Company Code and Sales Area's.
    User is restricted to one authorization group. When executing FBL5N, all customer balances are displayed i.e. including blank authorization group customer. It is not restricted to authorization group customer! Why?

    Kindly check the authorization objects assigned in the user profile. You may ask your basis to help you with the authorization.

  • Authorization Group (BEGRU) search help  required in Easy DMS

    Hi all,
    I had defined some value in authorization group (BEGRU) in SAP. When i opened the Document using CV01N/ CV02N transaction, then F4 help is available to me.
    but when i opened the same document via SAP Easy DMS 7.0, Search help functionality is not there.
    How could i activate this.
    Pls.. Suggest.
    Regards,
    S Anand

    Hello Sheo,
      EasyDMS does not provide search help for Authorization object as of  the latest release. The search help achieved by customization of the domain BEGRU does not reflect in EasyDMS.
    To achieve this, you can enhance easydms interface by using either easydms plugins or EasyDMS custom tab.
    refer:
    http://wiki.sdn.sap.com/wiki/display/PLM/EasyDMSPlugin%28Addin%29-Advanced+Development
    note: 1355293
    Regards
    Surjit

  • Use of Authorization Group in OB52

    Dear Experts,
    I have updated Authorization Group as "OB52" in the last column of OB52 T-Code against each posting period variant with account type + , A,D,K,S,M etc with normal period 1 to 12 and special period 13 to 16.
    The same Authorization Group "OB52" is updated in one of FI users say Mr X Role profile under authorization object F_BKPF_BUP.
    Now as per the SAP standard practice the special period 13-16 should open for the user Mr X and block for all other users. But system is allowing to do transaction with special period 13-16 for other users also.
    Please advise where I am wrong.
    Regards,
    Alok

    Dear,
    I will explain you the step involved for auth Mr.X to post for the particular period.
    Let take an example  that Mr.X has to be allowed to post between the period 1 to 11 and other user only for the period 11(Apr - March as fiscal year).
    Now,for valuation variant with account  ' +'  for the first period, you enter from period as '1' and to period as '10' and in second period, you enter from period '11' and to period '11', provide the auth group (eg KU - key user)  in the last column.
    For other accounts (A,D,M,K,S) change the first period from '1' to '12' and dont assign any auth group.
    Now you goto se16n and check in TBRG table whether your auth group KU is available for the object F_BKPF_BUP,if not maintain it.
    The last step is to assign "KU" to Mr.X profile or role against the object F_BKPF_BUP.
    Once you made the change"generate" and save it.
    Now the system will permit Mr.X to post for the periods between 1 to 11 and other user only for 11 period.
    Hope that i am ab;le to clear your boubt.
    Do revert for any further assistance.
    Take care
    God Bless
    Regards

  • BAPI to create bp with name, search term, address and Authorization Group

    Hi
      which BAPI could be used to create Business Partner (type organazation) with names, search term, address and the Authorization Group field.
      ths

    Hello ,
    You can use : BAPI_BUPA_CREATE_FROM_DATA
    In case you need to update additional fragments just search in trn code SE37  for BAPI_BUPA_*CREATE.
    For example BAPI_BUPA_FRG0040_CREATE - Create classification data for BP , etc'.
    Additional you can use XIF :CRMXIF_PARTNER_SAVE to create business partners
    Rika

  • Authorization Group

    Dear Friends,
    I know I can restrict two user "A" & "B"  who create DIR  " 1001" & "1002" respectively under same document Type say "DRW". Means they cannot display the DIR created by each other  by Authorization Object "C_SIGN_BGR".
    I have tried this and works perfect.
    But my question is can I maintain these Authorization Groups so that  when user enters any wrong Authorization group, it should not allow him to enter in Authorization Group Field.
    If I Maintain the setting in SPRO in DMS>Approvals>Define Authorization groups, will my maintained  values will be validated with the values I enter in Authorization Group field.
    Also I know the developement mentioned under link.
    [https://wiki.sdn.sap.com/wiki/display/PLM/F4forAuthorization+group]
    But I want to avoid this developement.
    Waiting for your reply.
    With warm Regards
    Mangesh

    Hi Mangesh,
    To achieve this I suggest you to Update domain BEGRU as mentioned in the link
    http://wiki.sdn.sap.com/wiki/display/PLM/UsingAuthorizationGroupfieldin+DMS
    values can be maitained in ztable
    You can also have search help for BEGRU, by adding search help in DRAW table for BEGRU.
    also go through post - Re: Authorization Group in CV01n Document Data tab
    Auth object C_DRAW_BGR has field value reference to data element BEGRU
    Regards
    Surjit

  • Authorization Groups

    Hi Experts,
    If I have values NPD,R&D etc. for authorization groups. How to maintain these values in SAP DMS? Is there any t-code or spro configuration for maintaining these values? I know it's basis activity.
    I hope you understood the question properly, how to set the authorization groups and where to maintain the values for them?
    Regards,
    Ravindra

    Hi,
    In DMS auth grp is  free field and we can maintain any value for it.
    But to control access we must assign these value to auth obj  c_DRAW_BGR.
    This auth obj  will be assigned to role and role to user.
    So user who has auth value R&D in his role can enter this auth obj value while creating a dir and at the same time he can access a DIR with this auth obj value created by other user having same auth obj in his role.
    Plz note that this auth ob c_Draw_bgr works with other auth obj in DMS.
    Regards
    Abhijit

  • Hide price in ALL Tx accg to material authorization group or material group

    Hello,
    I'm currently working on a customer's need which consists in hiding the material price in all transactions (MM, SD, FI...), according to the material master authorization group OR the material group.
    The difficulty remains on the fact that users manage the transactions for other materials for which they can see the price.
    I've tested some solutions posted on the forum (Tx OMET + user parameter EFB, use of authorization objects M_BEST_EKG + M_BEST_EKO + M_BEST_BSA) but none is satisfying enough.
    Please tell me you have an idea that would prevent me from doing transaction variants + enhancements!!
    Thanks for your help
    Annabelle

    > I am unable to find out the Material or the Material Type that is linked with a material authorization group (QMATAUTH).
    >
    > Do we have a table where I can find the Material Types or the Materials contained in each material Authorization Group (Q_MATERIAL -> QMATAUTH).
    You can get teh details on QM authorization group through table TQ01D. YOu can go through the following post for list of QM tables and tcodes.
    QM Tables and T codes
    Thanks.
    Anjan

Maybe you are looking for

  • How do I synchronize a 250x250 Scan AO and AI with hardware clocks?

    Hi, I am building a Scanning tunneling Microscope STM which requires a 250 by 250 pixel scan with a delay of about 1ms between pixels. I want to start the scan with a software trigger. The scan entails outputting an x and y value using two AO channel

  • Preparing for clean reinstall

    I want to backup data and download OS to have a fresh system. I'm aware that I need to back up docs, etc, but wondering if there are system things I must attend to. (Or to which I must attend if you are one of thos snoonty Englsh majors) Ha. Thanks f

  • Can I batch-change country names in Address Book?

    I want to change all my country names to CAPITALS in Address Book. Is there a way to do this using a batch-change or batch-edit of some kind? (I have thousands of entries that I want to change.) Many thanks in advance for any help offered.

  • The volume on calls on my 4s is very low. How can I increase it?

    I can barely hear what the caller says. Any suggestions?

  • Premiere Pro CC + Multichannel Audio Export issues?

    Currently I need to deliver 6 Channels of 5.1 audio mixed needs to be paralled with film and add Closed Caption and export as QT (Pro Res 422(HQ) with 6 Channels of Audio). When I Try to export from Premiere Pro CC, I was asked combine 1+2, 3+4, 5+6