Authorization in the PP routing to change defined work centers
Is there an authorization object for routings to set the authorization to change only defined work centers in the operation of routings?
For PS networks there is the authorization object C_AFVG_APL. But this doesn´t work for PP routings.
Thanks in advance for a response.
Regards
Kathrin Worlitzer
Hi,
Yes, similar type of Auth. Objecct is not available in PP.
But, check these Auth. Objects: May be useful for your scenario:
C_ARPL_ART : CIM: Work center category
C_ARPL_WRK :CIM: Work center- plant
Regards,
Siva
Similar Messages
-
Folder Redirection policy is not applied to a user, when the server target is changed.
After server target is changed via group policy, when user login (roaming profile)first time, the the new server target has not been applied, instead it's pointing to the old folder redirection path.
But if we reset the windows profile (roaming ), the new folder redirection works, can you please specify a solutions that the new folder redirection works when the user login for the first time. so it reduce the time on resetting users profile.
it seems that we need to delete the old folder redirection path from the user profile (roaming user profile) via group policy or similar solutions..
Many Thanks> But when the specific users login they all get the same error, it
Is the old server removed from the domain? Seems so - or some other
authentication related issue, hard to tell from here...
> seems that the roaming user profiles still keeps the old server details,
Yes - if you change redirection targets, FR moves content from old to
new, and only if this ends sucessfully, it will update the redirection
target.
Make the old redirection target accessible to the user and you'll be fine.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
On some sites the visited link color does not change. I have checked all settings and they have not changed. I can make the problem change by unchecking the "allow pages to choose thier own colors" box , but the some pages do not display correctly. Things worked fine up to a few weeks ago. I feel it may be a glitch in firefox 29.
Windows 7 home premium SP 1
Firefox 29Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*[[Image:new fx menu]] > Options/Preferences> Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*[[Image:new fx menu]] > Options/Preferences > Privacy > "Use custom settings for history" > Cookies: "Show Cookies" -
It was fine yesterday, this morning got up to do what I usally do, Shut down on me
Called Apple 3 times followed thier instructions (Wifi Troubleshhot and Connectivity) EVERYTHING now its garbage!
I know I can get a protection plan but my mom said thier was no need for one because of the price!
Ive tried updating it...It said it needed wifi!
Dont know! Feel screwd up at this point Can any one help me???!!! It is also a year old! Got it in January and It has not lived to its first birthday!!!:'(If you have not taken the iPod apart, Apple will exchange it for a refurbished one for $99. You can do it an an Apple store
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or sent it to Apple -
This is a pain when the phone re-sorts the order, when I need the most used number to be first using hands free in my car. Who can get this corrected in the iphone software to leave the order in which I imput numbers alone.
My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!
-
Satellite T110-11U - Can't find the WLAN router
Hi,
I have a Toshiba Satellite T110-11U. Have had it since Feb and loved it - happily used it wireless throughout the house. Then one day about a month ago unless I was in the same room as the wireless router, wireless doesn't work. I have 2 other laptops (and an iPhone) that still connect wirelessly throughout the house and the garden without problem.
As you can imagine, this was very strange. When I take it out in to the garden, my other laptops find all the wireless networks in the area, but my Toshiba finds none.
Suspecting it was a driver issue, I made sure the wireless drivers were up to date. With no joy there, I recovered the system to as it was when purchased (doing a full restore by interupting the booting up and letting the hard disk be wiped and reinstalled etc). Still the same problem. I've even changed the rooms the router is in, and the same problem - the Toshiba can't find the router unless the router is within a couple of metres of the laptop.
Before I lose the will to live, can someone suggest the cause of my problems, or is it time I admitted defeat and took it back to comet under warranty (where the will probably test it next to a wireless router and tell me all is fine!).
Many thanks,
Steve.>the Toshiba can't find the router unless the router is within a couple of metres of the laptop
Does this mean that the T110 can find the wlan but only if its placed near the router?
Just other hint;
Go to BIOS and set it to default! Ensure hat Wlan is enabled and dont forget to save the changes.
You should also go to control panel -> device manager -> Wlan card properties -> Advanced tab.
Should check the Wlan settings like the Wlan encryption, Wlan channel, etc
Be sure you have enabled the WLan card on your notebook as well! -
I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!
I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message. -
We installed a new router and changed the name of the router. Now my HP C4500 printer won't print.
Our cable company installed a new wireless router and changed the name of the router. Now my HP C4500 printer won't print from my laptop.
I can't find any ot the Set Up stuff I used initially.
Is there any way to get my printer to work again...wirelessly?Get the latest software for your printer from the "Support & Drivers" link at the top of this page. When you start the installation it will ask what kind of installation you would like. Choose "Wireless" or "Network" then click "Next".
Eventually it will ask you to plug in a USB cable to the printer temporarily to communicate the new router's info to the printer. Make sure to not plug in the USB until it asks.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Scheduling Agreement LU: Can Route be changed in the SA item?
Hi all,
I noticed that in the Transport Scheduling Agreement SA type "LU" but in general I think in any SA there is no any chance to change the route determined by the system in the shipping data within the item of SA.
If you select Menu Item > More Functions > Shipping Data you can go an see the detail.
Is it something I can set in customizing or the field EKPV-ROUTE is unchangeable?
The route has to be changed in order to set the ones used for transfer stock between the two plants.
Thank you in advance
AndreaI have found a reasonable solution to my issue that perhaps it could be helpful for others who have the same problem.
Stock transfer sheduling agreement is between two plants which are assigned to the same company code.
Each plant is assigned to an additional customer code with its own specific ship-to-party. Both customer codes have to be linked to the same payer in case there is an additional plant who belongs to another company code by which you debit stock transfer.
The two customers which represent the addresses of the two plants have a specific transportation zone. There is then a node in customizing dedicated to the route determination in which you have to set the combination for the departure country/zone and destination country/zone with the proposed route.
By this settings when you create a scheduling agreement between the two plants: "LU" type, the system values the correct route in each item of the SA according to your customizing.
Kind regards
Andrea
Edited by: Andrea Brunori on Oct 21, 2010 2:45 PM -
cannot authorize my computer, I'm having this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." please help me
Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization -
We have had to change to a new router but the Macbook Pro still reverts to the old one. How can we lose this and make the new router the default?
Go to "Network" under system preferences and choose "advanced"
On the Wi-Fi tab you can sort the sequence of the preferred connections.
Then just move your new router to the top of the list. -
FM to change the standard routing
Hi all,
I'm wondering if there is any BAPI or FM to change the standard routing, say, insert some operation, update some elements, etc...
regards.Hi all,
I'm wondering if there is any BAPI or FM to change the standard routing, say, insert some operation, update some elements, etc...
regards. -
How to get the wireless router to work when i change to new modem and internet connection
I already set up my wireless router in my macbook but then moved to a new house and basically have a new internet connection. My internet connection is fine when i connect the ethernet cable form the modem to my macbook. But when i plugged in the wireless router, my computer sees it but will not connect to the internet. I lost my installation CD and i tried to re-install using the dowloaded installation but it goes into error saying i can't re-install if i don't change back to default.. anyway, maybe the solution is simple but it eludes me so please help!
In summary:
1. same macbook
2. same wireless router
3. same internet provider but new connection and modem (since i moved to a different house)
how do i get my wireless router to work? thanks!!!Who is your Internet Service Provider(ISP)?
If you have a cable connection then follow this link and if you have a DSL connection then follow this link to configure your router. -
Is there any way to change what type of security on the wrt110 router
i just got a new router and i was trying to connect a laptop to it. but the laptop is so old it can only connect to the wep security and the router has wpa/wpa2 security. does anybody know how to change the security type?
Message Edited by Diego806 on 07-17-2009 06:51 PM
Message Edited by Diego806 on 07-17-2009 06:54 PMYes, you can change the Security on your Router -Also change the SSID to avoid extra troubleshooting...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
Maybe you are looking for
-
My phone broke four and a half months ago, and Sony still haven't fixed it.
In mid october my phone broke, the phones functions continued to work (calls, notifications etc.) however there is no display on my screen. I initially went through the sony repair centre number and arranged for my phone to be sent via their free pos
-
First off thank you for anyone that reads this, I am very new at LabVIEW, and I think this maybe a trival question but I am not sure. I am building a test bench to measure the torque vs angle of clutch disc to find the hystersis. I am confedient tha
-
Adding a field in movement 561 with transaction MB1C
Hi! I would like to add a field (FISTL - found center) for movement type 561. I went in OMJJ and made field FISTL mandatory. The thing is that if I use MIGO and movement 561, the field is available and it's working corectly. What I would like is to u
-
Assigning multiple users to one action dynamically using Webdynpro
Hi Experts, In my scenario we need to send a request to list of people dynamically . How can we pass list of people through context parameter in the block. I am passing the value through context but only first user in the list getting task in UWL. It
-
eerytime I try to upgrade to this ver. it stops at the end because it cant find the folder containing the missing "itunes.msi" has anyone else experienced this and is there a solution. help. Using XP service pack 3