Authorization issue on Inventory Status Report!
Dear All,
One particular user is already authorized to access "inventory Status Report" .Moreover, Inventory Status Report's window is opened when he clicks but after pressing OK button the following messages comes [You are not permitted to perform this action [Message 200-30]].
Please advise me....
Hi,
As suggested above, re-post it as a question thread. You need to close your old open thread too.
Thanks,
Gordon
Similar Messages
-
Hello,
Upon running the Inventory Status report for item group item no. 'A' shows 5,000 Ordered. When I drilled down on the 5,000, SAP B1 only shows 4,500 on open POs. Please help
Using SAP B1 9.0 PL11
Thanks,
JagritiHi,
Please refer SAP note:
991077 - How to check 'Committed' and 'Ordered' values
Thanks & Regards,
Nagarajan -
Authorization issues MM/PP STATUS Changes
Hello,
I'm getting the following error even with SAP_ALL SAP_NEW
BDC Transaction Report for ZM02. Report: ZUCC0026
Run by: KHALIFAO page: 1
On: 11/11/2009 at : 09:06:12
In System: Q47
Authorization issues MM/PP STATUS Changes
M365SC1110020 ZFIN M680 MM/PP STATUS 00 Not authorized to change MM/PP status
One of my user is having the following error when she excuted the following steps :
Steps:
SE38/ ZUCC0026 - Material Mass update program for Costing View
Enter the following fields before executions
Material : M365SC1110020
Plant: M680
Check off update material
Field to update: select MM/PP status
New Value: 00
Execute transaction
Thanks
Osama
Expected results: output document should states that update of MM/PP status was changed from XX to 00.
This messageHello Julius,
SY-UNAME
ZUCC0026 550 WRITE: / 'BDC Transaction Report for ZM02. Report:'(b01),
/ 'Run by: '(b02) ,sy-uname COLOR 5,
1167 * IF sy-uname <> 'BATCH'.
1183 READ TABLE itab_zusrgroup WITH KEY group_id = group_id
user_name = sy-uname.
1212 SELECT SINGLE update_ind scop_ind
FROM zusrgroup INTO (itab-update_field,l_scop_ind)
WHERE user_name = sy-uname
AND group_id = itab_fields-group_id.
1219 * WHERE user_name = sy-uname
1223 READ TABLE i_zplant WITH KEY
user_name = sy-uname
werks = itab-werks.
1422 SELECT werks FROM zusrplant
INTO zusrplant-werks
WHERE user_name = sy-uname.
1453 MOVE: sy-uname TO i_zplant-user_name,
Parameter :
188 *PARAMETERS: p_mode TYPE c DEFAULT 'N' NO-DISPLAY. JHSIR35508-
189 PARAMETERS: p_field LIKE itab_fields-descriptio.
190 PARAMETERS: p_name LIKE itab_fields NO-DISPLAY.
191 PARAMETERS: p_newval(14) TYPE c.
193 PARAMETERS: p_file(100) TYPE c LOWER CASE.
194 PARAMETERS: p_filval AS CHECKBOX. "0001+
195 PARAMETERS: p_unix AS CHECKBOX. "0004+
33 PARAMETERS: P_UPD AS CHECKBOX.
Thanks
Osama -
Authorization Issue in Inventory Reports
Hi Experts,
My clinet is using SAP B1 8.8 PL11 and we are facing issue in inventory report, we have set proper authorization for the user, but when that user try to open any inventory report, it allow to select paratmeters for the report but when he click on ok button to generate reports system throw erro YOU are not permitted to performed this Action.
We have given full authorization to for all inventory reports.
Pls. tell me if i missed something in general authorization.
Regards
Kamlesh VagalHi Kamlesh...........
One Module is Report where Inventory reports are there.
think your have given authorization to this module, But another Inventory module is there
where Invetory reports are there. I guess you have not given the permission for this Inventory Reports.
Give Authorizations to both modules and then see the effect.
Regards,
Rahul -
Authorization Issue while running a report
Hi Experts,
We are facing strange issue in authorizations while runnung a report. When we givel '*' company code access to the users they are able to run the report. When we give one single company code specific access to the users they get error message : No Authorization or everything filtered Out".
Please let me know how can i debug the same.
Company code specific access along with sales grp, profit ctr, sales employee are maintained in a ODS in BW.
Thanks
GauravHi,
When you use authorization relevant char in your report, you should create a variable of type authorization.
The variable input may be mandatory or optional.
By doing this, the default values will pop-up in the variable input screen when the user tries to execute the report.. It is also relevant to mention that the user cannot enter any blank values for the authorization variables unless he/she got * access for that particular character.
Also do not hardcode any values for authorization relevant char inthe report.
It will throw error No Authorization.
Guru. -
Authorization Issue for Inventory in warehouse report
`Hi All
I face a issue in giving authorization for a single report to a user in the Inventory reports. The report is Inventory in warehouse report.
Can u please tell what are the preliminary authorizations to be set for the user to execute the report. The thing is he should not be able to see the item cost and Last purchase prices.
Thanks... MarikannanHi,
I am not sure if the authorization for such report is available. I just suggest you to check if form settings icon is able to access or not. if you can open the form settings, I think you can set authorization to be no authorization to access the form setting for certain users.
Rgds, -
Continuous Inventory Status Report
hey all,
i hope you can help me with my requirement:
we're doing a Continuous Inventory and we need a report with all materials in one list, that shows us which material is counted, which is not counted and so on.
is such a report available in SAP?
best regards
christianContinuous inventory is an inventory method in WM, you distribute the count of all bins over a time span of one fiscal year.
WM inventories are usually focused on bins, not on material. So you are actually completed when you have conducted a count in all bins.
If you want to know which materials have been in that inventories, then you may need to list them from table LINV. You may need another download from table MLGN with all materials in that warehouse, or LQUA with all quants from that warehouse, and then do a VLOOKUP in Excel to know which of those materials was not included in any count.
But you may not find a status update in material master, since the continuous inventory is updating LQUA and LAGP table but not material master tables. Material master is updated in case of inventory management physical inventory. -
BW Analysis authorizations issue in BO Webi Report
Dear All,
I have one webi report which is on BEx Query-universe.
Query has 6 authorization variables with ready for input(optional).
User has authorizations for all 6 fields.
But when we execute the webi report it is throwing error message like" query do not retrive data"
One of the 6 authorization fields has only few values , when we give " * " to this field the user can able to execute the report.
Could anybody tell me what is need be done here
regards
mhreddyHi!
Probabily the combination of authoriztions funcions are executing considering "and".
See your configuration to considerer "or".
Test one by one.
bye -
Issue on inventory 0IC_C03 report
Hi All,
I want to design a material movement report.
and the report will contain opening stock, closing stock, end value, 101 movement, 102 movement, 321 and 322 movement.
As I made this on 0IC_C03, with
opening value(0valstock and day interval-1),
closing stock (opening value+ total receipt -total issue),
end value (valuated stock value),
321 movement(issue quantity into quality checking),
322 movement(receipt quantity from quality checking)
But the vale of this report not matching with the standard report MB5B (in R3)
Plz any one inform me how to solve this issue.
with regards,
Balaram
Edited by: Balaramtripathy on Apr 20, 2011 12:51 PMHi,
I am also facing similar issue, Let me know How you solved such issue.
Thanks,
Sushant -
Authorization Issue to display BI Report
Dear Expert
We upgraded CRM (from 4.0 to 2007) and BI (to 7.0). I'd like to display a standard BI report from CRM WebClient. But I click on the link, I get the following error: User does not have the proper authorizations.
But I have SAP_ALL in both systems...
Thanks in advance
StephanieWere you able to solve this problem, becuase I am also geting same problem?
-
Dear Experts
i want to add the following query
T0.[InvntryUom] as 'Pak Size', (T0.OnHand /T0.InvntryUom ) as 'In Stock (Carton or Pail)', T0.[CodeBars] as 'Minimum Inventory Level'
into below query. can somebody advice on it.
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Whse nvarchar(10)
Set @FromDate = (Select min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]')
Set @ToDate = (Select max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]')
Set @Whse = (Select Max(s2.Warehouse) from dbo.OINM S2 Where S2.Warehouse = '[%2]')
Select
@Whse as 'Warehouse',
a.Itemcode,
max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance,
sum(a.INq) as 'IN',
sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing
,(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from(
Select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,
(sum(N1.inqty)-sum(n1.outqty)) as OpeningBalance,
0 as INq,
0 as OUT
From dbo.OINM N1
Where
N1.DocDate < @FromDate
and N1.Warehouse = @Whse
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription
Union All
select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,
0 as OpeningBalance,
sum(N1.inqty) ,
0 as OUT
From dbo.OINM N1
Where
N1.DocDate >= @FromDate and N1.DocDate <= @ToDate and
N1.Inqty >0
and N1.Warehouse = @Whse
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription
Union All
select
N1.Warehouse,
N1.Itemcode,
N1.Dscription,
0 as OpeningBalance,
0 ,
sum(N1.outqty) as OUT
From dbo.OINM N1
Where
N1.DocDate >= @FromDate and N1.DocDate <=@ToDate and
N1.OutQty > 0
and N1.Warehouse = @Whse
Group By
N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where
a.ItemCode=I1.ItemCode
Group By
a.Itemcode
Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0
Order By a.Itemcode
Regards,
Parikshitam closing this thread. i have posted new thread kindly help advice on it.
-
Need monthly "material-wise" report on inventory status.
Hi, gurus!Good Morning.
I am pankaj recently i joined in SAP-MM.I have 4 yr.of domain exp.in SCM.
Now,i allocate to one implementation project in Textile industory.Here there two plants,out of two GoLive of one plant has been done & in April-12 there is Golive of next plant.
Now, i am working on some standered reports.here client wants monthly material wise inventory status report & Daily material movement report materialwise.
i generate the report in" S_P00_07000139 "but it didn't show materialwise,it shows all material separate.
Request to help on the same.
Regards,
Pankaj.HI,
No standard report will full fill your requirement
you have develop Z with help of ABAp consultant
for Material document table MKPF and MSEG
and check following link also it will helpful to you
[Opening Stock and Closing Stock fields and Calculation;
Regards
Kailas Ugale -
BI 7.0 Analysis Authorization issue: some reports displaying a blank page.
Hi All,
This is regarding BI 7.0 Analysis Authorization issue.
Overview:
we have restricted some queries at infoobject level.
Issue:
a. For some of the queries, we can see the selection screen but when we try to execute the query by clicking on the execute button (Queries WAD) we get a blank page, meaning nothing is displayed on the output (white/Blank screen).
b. When we execute the same query through RSRT, we get a message which says "Disconnecting from BW server..".
c. Let me explain further on this. Basically we are doing this in order to have limited access to Auditors at the client side. At the same time normal users should not get impacted due to this, hence we created two roles. One for normal users and other for Auditors.
d. Now the thing is that we execute the same report with normal user ID's the report executes properly and displays the output. it does not show the blank page.
e. But when we execute the same report with Auditors ID then we get a blank page.
Any idea why this is so?Hi Neha,
I tried the below also,
GL Acnt
I EQ 0000134010
I EQ :
but still it didn't work.
No Infoobject is missing in Authorization Object.
For your point, "rsecadmin - > analysis -> execute as -> check for the desired user & analyze the log" it didnu2019t allow me to analyze, since as soon as click on execute button a pop-up comes up saying "Disconnecting from the BW server..."
As mentioned earlier also it is giving me the below message,
""I>> Row: 103 Inc: AUTHORITY_02 Prog: CL_RSR_RRK0_AUTHORIZATION RS_EXCEPTION 301CL_RSR_RRK0_AUTHORIZATION AUTHORITY_02"
Kindly suggest, since this is a show-stopper for us!
Thanks,
Ishdeep Kohli. -
Enhance GRC issue status report columns
Hello GRC Gurus
I am new to GRC application and I have a requirement to enhance u201CIssue Statusu201D report fields.
Process:
Goto -> Report Center - > "Issue status" Report -> run based on the condition. It will display ll the issue report in a ALV table formate with the columns
Organization Subprocess Control Issue Ectu2026(As configured in SPRO)
But my requirement is to add a Custom additional Field to the ALV table report:
Is there any enhancement to add the custom field in to the report and implement logic to populate data to the same?
Kindly let me know your comments.
Thanks you ,
Regards,
Magesh
Edited by: mageshB on Dec 28, 2010 6:10 AMYes, of course.
Kindly look into the view cluster:
VC_GRFNREPCOLUMNSC - Reporting: Customizing of report columns
VC_GRFNREPCUST - Report: Customizing -
Enhancement of report Inventory Status and Inventory in Warehouse Report
Hello,
it will be a great help if preferred vendor will be displayed in the stardardreports "Inventory Status" and "Inventory in Warehouse Report".
Kind Regards,
Sabine LuxHi Sabine,
Check here: /thread/2073266 [original link is broken]
Thanks,
Gordon
Maybe you are looking for
-
IPad2 Doesn't see internet.
Just bought my iPad2. It worked fine in the Apple Store. It apparently connects to my home network but does not see internet. Safari gives the error message that it is not connected to the internet. I use Time Capsule as my router. Everything else w
-
My Mac Book Pro is getting very slow (2009) I want to replace 250 optical drive foe a 256 SSD Samsung850 pro drive. What is the best way to proceed. I am running Yosemite now. Have the SSD drive formatted and a back up made of my old drive. Do I hav
-
Facetime problems with microphone
I have been having problems when using facetime, the person I facetime cant hear me and they just hear a russle down the ipad? any one help?
-
How to Disable Auto Updates on Flash Player 10 using mms.cfg
Hi Friends, I am a newbee into this.I am trying to install a customized Adobe Flash Player 10.2.153.1 in which auto updates are disabled. I went through the Adobe guidelines and found that it is possible to do the same using a MMS.CFG file. Can any
-
Itunes won't reinstall or update due to helper.exe access
My Itunes was partially wiped out due to lack of memory in computer after attempting to install a game. The memory issue was resolved by adding more. I cannot uninstall or reinstall itunes. I even attempted to update it with the newest version, howev