Authorization issue when I display data from ODS, Infocube, Multirprovider

Hi Experts,
When I'm trying to display data for ODS, Infocube, Multiprovider, Infoset in production system, facing aurhorization issue.
Can anybody have idea what is authorization objects to display data from Infoproviders.
SIRI

Check for below authoriztions in your role:
S_RS_ICUBE
ACTVT          03
RSICUBEOBJ     AGGREGATE, CHAVLREL, DATA, DATASLICE,   DEFINITION, EXPORTISRC, UPDATERULE
RSINFOAREA     *
RSINFOCUBE     <your cubes>
S_RS_ODSO
ACTVT          03
RSINFOAREA     *
RSODSOBJ     <your DSOs>
RSODSPART     DATA, DEFINITION

Similar Messages

  • Voyager hangs out when trying to display data from an InfoCube

    Hi experts,
    I'm trying to use Voyager for first time in a new installed environment. From the CMC I've created a connection against a BI InfoCube. Then, I create a new Voyager Workspace based on this InfoCube. All InfoCube Dimensions and Infoobjects are displayed in the left pane. Then I try to drag one of the Characteristics to the right pane, but Voyager seems to hang Showing a message "processing". No data data is displayed, and I can't drag more characteristics or key figures...
    There is any known issue about what could be happening? InfoCube has data and I've already built Universes & WebIntelligence reports based on this InfoCube with success. Then the problem seems to lay on Voyager layer, not in data/OLAP layer.
    Thank you very much!

    Hi
    When Voyager creates the initial data view (i.e. when you drop the first dimension on the cross-tab) it has to go and get all the dimensions, all the hierarchies and all the level zero members of the default hierarchies. Although this isn't a large number of items, there are some circumstances that the API call to SAP, say to get the hierarchies for a particular dimension, takes a very long time. The other tools won't necessarily experience this problem as they are more selective about what initial meta-data they load up. For example, they will only load up the dimensions and hierarchies needed for the query.
    The first step in trouble shooting this will be to profile the calls Voyager makes in the SAP OLAP BAPI to see if there are any of these calls that are taking a very long time. You can profile this either from the SAP end or by turning on the logging for the Voyager data access component.
    If you identify a SAP API call which is taking a long time, you then need to see if there are any messages concerning fixes to such problems. I know there have been fixes to correct calls to get hierarchies in certain circumstances which have been taking too long.
    Reuben

  • Issue when uploading Sales data from DSO to Cube.

    Dear All,
    I have an issue when I am uploading Sales data from DSO to Cube.  I am using BI 7.0 and I have uploaded all sales document level data to my DSO.  Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube.  Cube has customer wise aggregation data.
    In DSO I have NetPrice(KF) and Delivered_QTY(KF).  I do a simple multiplication routine in the transformation from DSO to Cube.
    RESULT =   SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
    At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
    Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
    Can someone please help me.
    Shanka

    Hi,
    are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
    did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
    During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
    but first verify if other key figures are also having the same issue.
    Thanks
    Ajeet

  • Authorization Issue when Syncing w/ music from CDs

    Hi all,
    My wife tonight was attempting to sync her iPod; she (may) have installed something today to be able to read Kindle notebooks, but she's now not sure if she had actually installed it...
    Ignoring that for the time being, when trying to sync, she's getting the error that "This computer is no longer authorized to play purchased items that are on the iPod XXX.  Would you like to authorize this computer for items purchased from the iTunes Store?", and states that if the computer is not authorized, 342 songs, including YYY, will be removed from the iPod.
    That's all great, but these songs have been usable on her iPod now for several years.  Furthermore, several of these may have been imported from CD's and thus not purchased.  As it is, I tried doing the File > Get Info trick, in order to learn what other screen name she might have used, and I discovered that there is no account name field.  I tried de-authorizing and re-authorizing, but to no avail.  Pretty much, I followed everything suggested at http://support.apple.com/kb/TS1389 to fix it, and nothing worked.
    So my question:  is there a way to fix this that doesn't involve my wife losing these 342 songs?
    Thanks,
    Fred (for Colleen)

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to set Max. no. of hits when i display data

    Dear Experts,
    when i display data in ODS/Infocube, i hope display data of  the default value is 1000,how to set Maximum number of returned records.
    in SE11, i have goto utilities>settings>repository infosystem-->maximum No. of Hits  1000
    but still no any effect, how should i do it?
    Many Thanks
    Best Regards
    Stevezhuang

    Steve,
    If I'm not wrong you are talking about the number of hits while displaying the table content right, if yes that's what i was discussing.
    goto se11 -->enter the table name --> click on display --> click on contents -->it will take you to table selection screen there in that screen you will find the below options,
    in the menu bar -->settings --> user parameters --> change the max no of hits :1000 and click OK.
    You can set the desired max number of hits- that's wht i was talking about.
    Regards
    prashanth

  • Report not displaying data from one of the infoproviders

    Hi Experts,
    Issue: Report not displaying data from one of the infoproviders
    I have a report 'ReportA' which has multiprovider MP1 as the source.
    MP1 has two Infocubes IC1, IC2 in its design.
    Now, when i execute the report, data from IC1 is displayed. But no data from IC2 is displayed.
    Is there a setting i need to enable in MP1 ? or is there anything else that needs to be enabled ?
    Please reply.
    Regards,
    Suraj S Nair

    Hi All,
    When i display data directly from the multi provider, without any restrictions, i cannot view the data from infocube IC2.
    I feel its not an issue with the Query. It must be a problem with the setting in the Multiprovider MP1.
    Infocube IC2 is a copy of Infocube IC1. Multiprovider MP1 first only had IC1 in its design. It was recently IC2 was also included.
    I checked the Characteristics, all of them are assigned corectly.
    Now, this issue sure has something to do wiht the setting of Multiprovider or please correct me if wrong.
    Regards,
    Suraj S Nair

  • Issue with display data from infoset

    Dear Experts,
    When I am trying to display data from BI INFOSET in (Execute in background ctrl+F2)backend it is working fine but when in try to run the execution in forground (execute F8) then the system gets hang.. and time out. could any one has this kind of experience. if so kindly let me know do i need to implement any patch or  else which way i can do work to resolve this issue.
    Thanks in advance.
    Mannu

    Hi Krishna,
    I have tried as you have suggested ie. using Tcode RSISET for displaying data but still i have the same issue.
    Could any one post any additional suggestions to follow.
    Thanks in advance,
    Mannu

  • Error when trying to load data from ODS to CUBE

    hi,
      Iam getting a short dump  when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

    Hi,
    Check this thread.........Ajeet Singh  has given a good solution here.........
    Re: Error With Data Load-Getting Canceled Right Away
    Also check SAP note: 382480..................for ur reference............
    Symptom
    A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
    Data type "TXW_INDEX" was found in a newer version than required.
    The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
    Additional key words
    RTXWCF01, LTXW2U01, TXW_INDEX
    Cause and prerequisites
    This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
    Solution
    If possible, avoid running DART extractions in parallel.
    If you do plan to run such jobs in parallel, please consider the following points:
    In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
    Run parallel DART jobs on different application servers.
    As an alternative, please apply note 400195.
    It may help u.........
    Regards,
    Debjani.......

  • Record increased when sending data from ODS to cube

    Hello experts,
            when i am sending data from ODS - CUBE i am sending 20 records of full update but in my cube i
    am able to see 200 records, in those records i am getting the old records.Everytime i load the data i am getting the same problem its fetching all the old records.Please suggest me what to do inorder to reslove this problem.
    Thanks alot,
    Komal.

    Hi,
    TO delete the PSA Table record details follow these steps,
    Right click your ODS/CUBE and choose "Show dataflow diagram" on right side panel click "Techincal Settings" ON and you can get your PSA table name. Type this table name in SE11 and delete your records.
    OR
    IN RSA1 --> PSA choose your infosource and choose PSA and right click and choose delete PSA data.
    Hope it helps
    Regards,
    Arun.M.D

  • Error While Loading Data from ODS to ODS

    Hi Experts,
    When i'm loading the data from ods to further ods, i'm facing an error while activating the data saying that 0ref_doc_no consists of invalid characters.Also it is saying that Error when assigning SID.
                          I'm unable to see the  long text for further information.
    Regards,
    Vijay

    Hi vijay bhaskar,
    first go to RSA1 -> go to datasource -> search for the data source with name "8<old DSO>". Go to dispaly and click on PSA button on top. Now you can see PSA data request. in the bottom left you select error records and display. now you will see all the error records. go through each and every records and see what is the special characteristic in that record and copy that special character in notepad. After collecting all the special characters in notepad, goto RSKC -> paste all the special characteristics from note pad. execute it.
    Now, go back to PSA, delete the request from PSA. Schedure the infopackage to load the data. Now, will not see any error like special characteristics.
    I hope you understood and can handle your issue.
    Assign points if it is helpful.
    Reagds,
    S P.

  • Error when updating the data from DSO to cube

    Hi,
    I am getting the error when uploading the data from the ods to cube.
    The following is the error message.
    Unable to determine period for date 20090101, fiscal year variant Z2: Error #
    How can i solve this issue.
    Regards
    Annie

    Hi ,
    fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
    check this link ..
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
    http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
    Regards,
    shikha

  • Short dump MESSAGE_TYPE_X in displaying data from BPC Virtualcube

    Hi Experts,
    I am experiencing an error when try to display data from a BPC VirtualProvider Infocube (both from Workbench and with LISTCUBE transaction).
    This kind of virtualcube is auto generated by BPC.
    When I do some kind of selection I obtain this error: MESSAGE_TYPE_X
    Short text of error message:
    System error in program SAPLRRK0 and form CHECK_KHANDLE (see long text)
    Technical information about the message:
    Message class....... "BRAIN"
    Number.............. 299
    Variable 1.......... "SAPLRRK0"
    Variable 2.......... "CHECK_KHANDLE"
    I have another BPC vitualprovider and this doesnu2019t happen.
    I would use this cube inside a multiprovider, that has a BI cube too, and get the data through a BEx query. But the query throws the error and stopped.
    I know that there could be problems with BPC structures (i.e. changes in tech name when transporting it), but at the moment I donu2019t see other solution to compare BI to BPC data.
    I went through other posts in sdn forum for this issue, but I am not able to get the exact solution,
    please help
    Thanks,
    Marco
    System version:
    BW:     701 level 0007
    BPC:     750 level 0005

    Hi Lokesh,
    I read the note you have indicated.
    For the first note 1479393: I donu2019t have hierarchies and the error appears in a different program to what is indicated in the note. This is where terminated:
    Termination occurred in the ABAP program "SAPLRRK0" - in "CHECK_KHANDLE".
    The main program was "GP4LQ7N6RS4RUB6HA69UREYGPKB ".
    In the source code you have the termination point in line 34
    of the (Include) program "LRRK0F05".
    Furthermore, there are no calculated measures nor members in the MDX statement, because I just try to display the data from the virtualcube.
    For the second 1448691: yes, it could be a performance related problem. Indeed, when I apply stronger filters, the error doesnu2019t occur and I got the data. But the system is already patched to SAPKW70107.
    So, do you have any other ideas?
    Thanks,
    Marco

  • Display data from a virtual InfoCube

    Hi experts,
    When I tryed to display data from the virtual InfoCube 0FIGL_V40, I've got a dump.
    Please help me to solve this problem.

    Dear Akshay,
    Is it possible that the problem comes from R/3 since when I check the extractor 0FI_GL_40 with the RSA3 Tcode I've got the message:
    Errors occurred during the extraction --- Message no. RJ012
    I think that the pb has been solved by switching on the business function "Reporting Financials" . Inthe SAP source System -> TA: SFW5. Turn on Reporting Financials. Then I've no pb while testing the extractor.
    Pb solved.
    Many thanks
    Youness
    Edited by: Youness NAJI on Jan 13, 2010 4:39 PM

  • Display data from CSV file in iWeb page

    Hi,
    I like to display data from a CSV file in iWeb page if a date value from CSV file matches todays value from the system. Here is an example.
    CSV data values
    01/20/2011,Sunny,87
    01/21/2011,Cloudy,100
    01/22/2011,Rainy,60
    If today's date value is 01/21/2011 the page should display 01/21/2011 Cloudy 100 in a tabular format.
    Appreciate your help in providing HTML code for this issue.
    Thanks

    I suspect there is a soft return in the excel database somewhere that can't be seen. Take the csv/txt file into notepad and look for a line that starts oddly compared to the others.
    I haven't had luck removing soft returns from excel files so I do this a rather odd way. I take the excel file into InDesign as a table, and then use find/change to replace any soft returns with nothing, then convert the text to table and then export the text out again by going export, and selecting text from the dropdown menu.
    For my money, I always save tab delimited text files from excel so that if a field does contain commas, it doesn't "trick" indesign into thinking a new field is beginning or not... instead the field delimiters are tabs and they are unlikely to have been used in the excel database.
    If you do choose to use this indesign import method of mine to clean up the database, i also noticed two things in your screengrab: first was that some fields have spaces at the start of the text... easy enough to fix with a GREP that looks for ^\s (start of a sentence followed by a space) and replace with nothing. The second thing is the T&C field that all entries (at least in the screengrab) all start the same – if all entries in the database start the same, couldn't that line be in the indesign file? Its only a small detail I know.

  • How do I display data from Multiple Queries in a spreadsheet?

    I am running Oracle forms 10g as a kicker to export a report (rdf 10.1.2.0.2) to PDF or Excel Spreadsheet - User's choice.
    Doesn't matter if I have desformat = SPREADSHEET, DELIMITEDDATA, or DELIMITED; I still get only the first query displayed when I run in spreadsheet format.
    How do I display data from Multiple Queries in a spreadsheet? Is this possible?
    Thanks in advance!

    Hi adam,
    did you search the forum? You will find a lot of threads handling the problem of Excel file access.
    In short: you need to use ActiveX (the RGT also uses ActiveX under the hood)!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

Maybe you are looking for