Authorization issue when trying to install FindmyPhone
My iphone 3gs won't install FindMyPhone because it says it's not authorized but it is.
I go to install it through itunes on my computer (Windows 8) and hit "sync" and it says "could not install because your computer is not authorized.
I go to Store than Authorize This Computer.
It says "this computer is already authorized."
My phone can't update past 6.1.6 incase that's important.
What to do?
Thanks in advanced.
I can't express it any other way than I have twice already. The setting enables the phone to be found (if switched on, and connected to the internet). The app is used to find a missing phone (not the one that the app is installed on, but another one).
Similar Messages
-
Issue when trying to install BOXI R2 SP3
Hello,
I receive this error message :
"Failed to read/upgrade the registry for the BusinessObject XI R2 Crtitical Hot FIx for Partner Integration Kits"
My server is in Windows 2003 with BusinessObject XI R2 SP1 and SP2 installed.
What should I do ? Which patch should I install ?
Thanks in advance,It sounds like you may have inadvertantly tried to install the integration kit SP3 instead of BOE SP3. What is the size of the file (SP3) that you are trying to install?
Regards,
Tim -
Hello,
I'm having an issue when trying to install Warcraft Logs application:
Warcraft Logs - Combat Analysis for Warcraft
https://www.warcraftlogs.com/client/warcraftlogs.air
I successfully install Adobe AIR, version 17.0.0.144 (and I'm using Windows 7 64 bits), without any problem (well, that's what I suppose), this is the Install.log from the Adobe AIR:
[2015-04-19:19:27:30] Runtime Installer begin with version 17.0.0.144 on Windows 7 x86
[2015-04-19:19:27:30] Commandline is:
[2015-04-19:19:27:30] No installed runtime detected
[2015-04-19:19:27:32] Relaunching with elevation
[2015-04-19:19:27:32] Launching subprocess with commandline c:\users\alberto\appdata\local\temp\air276b.tmp\adobe air installer.exe -ei
[2015-04-19:19:27:32] Runtime Installer begin with version 17.0.0.144 on Windows 7 x86
[2015-04-19:19:27:32] Commandline is: -stdio \\.\pipe\AIR_5800_0 -ei
[2015-04-19:19:27:32] No installed runtime detected
[2015-04-19:19:27:32] Starting silent runtime install. Installing runtime version 17.0.0.144
[2015-04-19:19:27:32] Installing msi at c:\users\alberto\appdata\local\temp\air276b.tmp\setup.msi with guid {34927EBC-98D4-4D53-98BE-510DF5999F50}
[2015-04-19:19:27:33] Runtime Installer end with exit code 0
[2015-04-19:19:27:34] Elevated install completed
[2015-04-19:19:27:35] Launching subprocess with commandline c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2015-04-19:19:27:35] Runtime Installer end with exit code 0
[2015-04-19:19:27:35] Runtime Installer begin with version 17.0.0.144 on Windows 7 x86
[2015-04-19:19:27:35] Commandline is: -installupdatecheck
[2015-04-19:19:27:35] Installed runtime (17.0.0.144) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2015-04-19:19:27:35] Performing pingback request
[2015-04-19:19:27:36] Pingback request completed with HTTP status 200
[2015-04-19:19:27:36] Starting runtime background update check
[2015-04-19:19:27:36] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows/x86/patch/17.0.0.144/update
[2015-04-19:19:27:36] Unpackaging http://airdownload.adobe.com/air/3/background/windows/x86/patch/17.0.0.144/update to C:\Users\Alberto\AppData\Roaming\Adobe\AIR\Updater\Background
[2015-04-19:19:27:36] Runtime update not available
[2015-04-19:19:27:36] Unpackaging cancelled
[2015-04-19:19:27:36] Runtime Installer end with exit code 0
Afterwards, I try to install the warcraftlogs.air application, and when I execute the program I get the following error:
Se ha producido algún error al intentar instalar esta aplicación. Instale la versión más reciente de Adobe AIR desde http://www.adobe.com/go/getair_es y vuelva a intentarlo.
Translated it should be something like this (this is not the official English message):
Some error has occurred while trying to install this application. Install the latest Adobe AIR version from http://www.adobe.com/go/getair_es and try again.
I've tried to search anything related, because I can't find that exact error message in any Adobe troubleshooting page, but everything I can find is a really old version issue, or something I've tried without success (trying to install everything running as administrator, also via cmd.exe ran as administrator, installing an older version, uninstalling and installing 100 times Adobe AIR, etc.).
I've also searched (but not asked) in Warcraft Logs forums for any solution, but I couldn't find anything related either.
Any help would be appreciated.
Thank you in advance and best regards! ^^Inesipinesii please remove your current installation of the Adobe Download Assistant from your Applications folder. You will then be able to reinstall the Adobe Download Assistant and begin the download process for Photoshop Elements 11. You can find more information at http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Known_i ssues.
-
I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: ST31000528ASQ
Revision: AP24
Serial Number: 6V***5JR
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 7200
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
<Edited By Host>If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case. -
How to resolve message "Installer database is corrupt" when trying to install CS4 on Win 8.1?
I purchased a disk set of CS4 a few years back and have recently purchased a new computer. When trying to install CS4 on the new computer, I received an error message saying "Installer database is corrupt. Please contact Adobe Customer support." Called "customer support" and after a VERY long time and three transfers, I was told "Too bad, we can't help you. Maybe download a new copy?" So I did. When trying to install the fresh download, I received the exact same error message: "Installer database is corrupt. Please contact Adobe Customer support." This appears to be a conflict between the CS4 installer database and Win 8.1. Is this a known issue? How do I resolve it? Thanks for any assistance. ~Evey
Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 4 or point product
-
Error message when trying to install Flash 10.0.45.2
I am running IE 7 on windows XP. We had some issues with Flash active active control version 10.1.53.64 and higher so I unistalled 10.1.53.64 and downloaded the older version (10.0.45.2) from the adobe website but when I try to install it I get the following error "The version of Adobe Flash Player that are trying to install is not the most current version. Please visit http://www.adobe.com/go/getflashplayer to obtain the latest more secure version". I am however able to install version 9.0.289.0
Is there any particular reason that i cannot install 10.0.
The reason that I don't want to use 10.1 is because it has a bug that affects the working of my application and the audio some times does not play.
ThanksThanks for the information. I downloaded the Active X from the link you provided but I am still getting the same error message
Date: Wed, 15 Dec 2010 17:01:23 -0700
From: [email protected]
To: [email protected]
Subject: Error message when trying to install Flash 10.0.45.2
If I remember correctly, there were two different installers for 10.0.45.2: one that did the checking for a newer version, and one that did not.
The forum search is currently disabled, and I cannot find the topics that were discussed at the time.
However, I still have the installers for the non-check version available for download on my servers:
http://www2.gol.com/users/pbw/filelib/install_flash_player_ax.exe (ActiveX)
http://www2.gol.com/users/pbw/filelib/install_flash_player.exe (plugin)
> -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
I am getting a "setup.exe has stopped working" message when trying to install labview 2011 or 2012 on a windows 7 machine. I already tried running setup.exe as an administrator with the same results. I have Microsoft .NET Framework 4.5.1 installed on the affected machine. Could this be the cause of this issue? Or does someone know the root cause of such error?
Solved!
Go to Solution.Hi - are you getting it at the start of installation, during or after 100% progress has finished?
Is it just LabVIEW you're installing, or is it drivers too, in which case, what was the last large package that was installing at the time?
This could be caused by the NVIDIA chipset driver :
https://decibel.ni.com/content/message/46299?tstart=-130
Thanks
Sacha
// it takes almost no time to rate an answer -
Error code 2343 when trying to install update on windows 7
When trying to install the updates to Itunes get this error message. Have tried the downloads direct method, turning off the firewall with same result.
How can I get it to accept the updateHello Mota21,
Welcome to Apple Support Communities.
Try following along with the troubleshooting suggestions in the article linked below, they should help you resolve the issue installing the latest version of iTunes on your PC.
Issues installing iTunes for Windows - Apple Support
Cheers,
-Jason -
I reciece the follwing message when trying to install
"The Installation package could not be opened. Verify that the package exists, or contact the application vendor to verify that this a valid windows installer package"Hey there Frank0619,
If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
Issues installing iTunes for Windows
These in particular:
Make sure you have an administrator account.
To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Download the latest version of iTunes.
The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
Disable conflicting software.
Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig:
Using Msconfig to troubleshoot conflicts in Windows XP
Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
Restart your computer.
Install iTunes.
Thank you for using Apple Support Communities.
All the best,
Sterling -
I am getting the message "The windows installer Service could not be accessed when trying to install Itunes on my new computer, any help would be appreciated.
Hey there Frank0619,
If you have not been able to install iTunes because the Windows Installer service is not available, I would recommend the troubleshooting in the following troubleshooting to help.
Issues installing iTunes for Windows
These in particular:
Make sure you have an administrator account.
To install iTunes, you'll need to log in to your computer with an administrator password. If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You could also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8 with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Download the latest version of iTunes.
The latest version of iTunes can be downloaded at http://www.apple.com/itunes/download/.
Disable conflicting software.
Some Windows background processes can cause issues for other programs and processes. These conflicts can prevent applications, such as iTunes, from installing. Disable conflicting processes by starting your computer using MSConfig:
Using Msconfig to troubleshoot conflicts in Windows XP
Using Msconfig to troubleshoot conflicts in Windows Vista, Windows 7, and Windows 8
Some security software made by other companies can't be disabled using MSConfig. If you've installed security software and you're having issues installing iTunes or QuickTime for Windows, you might need to disable or uninstall security software to resolve installation issues.
Restart your computer.
Install iTunes.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Error 2755 when trying to install itunes on my laptop please help
error 2755 when trying to install itunes on my laptop please help
the installation process gets so far then the error 2755 appears saying that it cannot be installedHey AJS4862,
Thanks for the question. If I understand correctly, you are having trouble installing iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Issues installing iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.
Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows -
Access denied when trying to install itunes on windows 7
when trying to install itunes I get a message access denied. using win 7 i have read that a certain windows update can cause this. can anyone provide any information on how to fix this? I've tried to remove this, but in control panel-update history, it say it was installed 08/22. when i look at the list to uninstall it, i don't see it.
KB2918614Go to Control Panel > Programs and Features > View installed updates then search the list for Security Update for Microsoft Windows (KB2918614). You may need to adjust the column widths to read the full titles. Uninstall it if you have it, then reboot and try installing iTunes again.
If you have further issues see Troubleshooting issues with iTunes for Windows updates.
tt2 -
When Trying to Install Labview 8.6.1 on Windows 7 Get Error Code -12
When Trying to Install Labview Deveopment Suite 8.6.1 on Windows 7 Get " *** Error: Windows SDK Function Returned an Error (Error Code -12)"
I assume a compatability issue will Labview installer and Windows 7. Is there a work arround?I figured as much, but maybe if enough peole are interested NI will be pushed to a solution.
It's not that the programm won't run, it's that the installer fails before it even gets installed.
I am using Windows 7 RC Build 7100. It installs and runs just fine in Virtual XP Mode on Virtual PC for windows 7 (http://www.microsoft.com/windows/virtual-pc/download.aspx) which I find works better than compatability mode.
Thanks for your help.
Maybe you are looking for
-
Changing data in the table control during run time of transaction F-28
Dear Experts, in transaction F-28 of second screen of second column (Field Name: Assignment) currently the data is getting from BSEG table and populating this column of table control, now I have a requirement that the data should be get from the othe
-
Creating an messagebox in forms with look and feel of Windows
I wanted to create an message box in my form with look and feel of windows.For this i used the package ORA.FFI...but i am getting an error....and i am not bale to clear it...the code is as follows Package Specification: - PACKAGE messagebox IS /*Func
-
How to export-import accounts in firefox 8?
in firefox 6 i saved my acount/password in a xml file how to import in firefox 8 this file?
-
So I'm pretty sure this has been asked, but when I read the replies its like "blah blah blah blah". I have a new computer that I'll be taking to school. I want to put itunes on the new computer, hook up my ipod, and have the songs from the ipod on th
-
My internet is connected and working but Maverick refuses to install all the way (past seeing it on the launchpad) because it says my internet isn't connected. I currently have OS X Lion. Any help would be great! Thanks!