Authorization issue with the HCM forms

Hi,
Initiating Manager is able to initiate the form but it does not proceed to the next approval step because of some missing authorization. Currently we are able to carry out our tests because SAP_ALL has been assigned to the users involved in the process.
Please suggest which authorization object i can use instead SAP_ALL.
Thanks & Regards
Praveen

You can do an authorization trace via ST01 and check which authorization objects are used then put together a role or add to one.
I'm moving this thread to the Security Forum, you might get a better answer there.
Regards
Juan

Similar Messages

What is the security/authorization issue with the Newsweek app?

I have tried for a week to figure out what is going on with this. No one on either side has any suggestions on how to fix the authorization problem. All was fine until last Friday. I don't remember doing any updates, but what a mess.

Just found this note posted here in 2013:
<<
ronaldfromukiah
Re: I can not sign into my magazine accounts for both Newsweek and Air and Space -All I get it Authentication Failed. Suggestons??
Jun 25, 2013 8:19 PM (in response to ronaldfromukiah)
This is the message I got back from Newsweek! Good not my iPad!! Thanks every - I will close this when everythign is OK.
I am sorry for the inconvenience. When we updated, there was a glitch with the update, and some subscriptions are not being recognized. We are working to fix the problem, and I will notify you when this is taken care of. I am terribly sorry. Thank you for your patience.
>>

HT1937 the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another

the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.

Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!!

Authorization issue after the Support packs upgrade

We're having problem on authorization issue after the SP upgrade.
One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
And the SU53 showing problem on S_TCODE FAGLL03.
How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
Thank you in advance.

How can i send you the trace file? What is your email address?
If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
Anyhoo... (copy right @ David)
What are the objects been caught in category RC=4, RC=12?
Relate them with functional aspect of the transaction (error screen)
Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
Regards,
Arpan Paik
Edited by: P Arpan on Aug 23, 2011 2:36 PM

Authorization Issue with ODS

Dear all,
I have an authorization issue with two ODS.
One I activated for BEx reporting --> Is working fine in Dev, but I get error with
missing authorization in QUA, althought some authorizations.
Same issue with a newly created ODS, which works in Dev, but gives an error
with missing authorization in QUA.
What can be the reason for this? Any input is highly appreciated!
Cheers,
Claudia

Hi,
check that the role(s) are transported from your DEV and your QA, and that the user has the correct role(s)
Check as well in your QA transaction RSSM for your ODSs objects; it might be that by transporting the ODS, some authorizations have been applied by default.
hope this helps...
Olivier.

Authorization issue with VA02 radio buttons

Hello All,
We are stuck at one authorization issue. The user navigates using tcode VA02.
1)     Execute Tcode -VA02=>
2)     2) puts order number # 100001 =>
3)     press enter =>
4)     press enter =>
5)     Screen: Change (Company Name) Return 100001: Overview =>
6)     Option: Display doc. Header details (looks like a magnifying glass beside PO_date) =>
7)     This bring us to Change (Company Name) Return 100001: header Data =>
8)     select status tab =>
9)     on Status tab lower end there is a button u201CObject Statusu201D =>
10)     Press it =>
11)     Come to Change Status :
12)     On this screen There is Status with status no. on the right side with 7 options
e.g:
u2022     1 BLK Approval Required for,
u2022     2 BL1 Approval for Credit,
u2022     3 BL2 Approval for material Replacer
We need to restrict the radio button access for user for which we are unable to find the authorization object.
Could any one help.
Thanks & Regards
gab

Hi,
Use ST01 to trace the user activities and check which objects its hitting when you click on those buttons, then you can restrict radio buttons using those objects.
I have'nt run the tcode myself and performed the steps you mentioned, but if you think its calling other transaction from those buttons you can manage tht in SE97, or add the t-code VA02 in the S_tcode auth object in PFCG.
Hope this should get you going
Thanks,
Vijay

Issue with the presence indicator in list/library web part.

When viewing a user field (Created By, Modified By or a custom People column) through the list web part (either through the default page /Forms/AllItems.aspx or a custom web part page using a list/library) the presence indicator always says presence unknown.
However if I go to the Site Permissions on the same site, or My Site or a custom page using a modified core search results web part I wrote the presence indicator works fine. I can't find any errors being reported on the server.
Looking at the rendered code the list web part generates:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn_48683,type=smtp alt="No presence information" src="/_layouts/images/blank.gif" border=0 sip="[email protected]">
Locations where the presence indicator works the code is:
<IMG name=imnmark width=12 height=12 title="" class=ms-imnImg id=imn{20140822-1752-098D-8C11-188AD0B8B8B6},type=sip alt=Available src="http://portal.mydomain.com/_layouts/images/imnon.png" border=0 sip="[email protected]" valign="middle">
It appears that the List web part is not detecting that the users have a sip address and they appear to be rendered using smtp instead. It's also odd that the list web part is pulling the correct sip address while the one that works is pulling the
email address, not the sip address stored in the user profile. I spent considerable time going through the xslt to try and figure how the tag is rendered but I haven't been able to figure it out.
We are using Cisco Jabber 9.2.3 for IM, I don't know if that should make a difference or not. It's working fine in other parts of SharePoint and in Outlook. Running SharePoint Dec 2011 CU (14.0.6114.5000) with MS Office 2010 SP2 installed on the client. Tested
in IE 9.0/10/11.
Any ideas?

We don't have a Lync server and I don't have the software available. Are you saying just having Lync installed even though it won't work might help?
I did some more digging and believe that this is an issue with the XsltListViewWebPart. If I go to the UserInformationList the web part used to render the list is the ListViewWebPart and the presence indicator works there. Also our environment
was migrated from 2007 and there are a number of pages that are using the old ListViewWebPart and the presence indicator works fine in this part. If edit the page and add the same list library to it, it's added as a XsltListViewWebPart and the presence
indicator does not work.
The presence control is not rendered by the xsl files used by the webpart. I modified the xsl to display the raw xml and the html code for the presence is part of the xml. I'm guessing this can't be changed and is part of how SharePoint is rendering
the data for the XsltListViewWebPart. You can see the Editor and CheckoutUser lines have the html code embedded in the data.
<Row
ID="60"
PermMask="0x7fffffffffffffff"
HTML_x0020_File_x0020_Type=""
File_x0020_Type="xlsx"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapall="icxlsx.png|Microsoft Excel|SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapcon="SharePoint.OpenDocuments"
HTML_x0020_File_x0020_Type.File_x0020_Type.mapico="icxlsx.png"
serverurl.progid="1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
ile_x0020_Type.progid="SharePoint.OpenDocuments.3"
File_x0020_Type.url="FALSE"
FSObjType="0"
FileRef="/sites/BPIT/Shared Documents/Database Sizes.xlsx"
FileRef.urlencode="%2Fsites%2FBPIT%2FShared%20Documents%2FDatabase%20Sizes%2Exlsx"
FileRef.urlencodeasurl="/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx"
FileLeafRef="Database Sizes.xlsx"
FileLeafRef.Name="Database Sizes"
FileLeafRef.Suffix="xlsx"
CheckoutUser="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_77,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
CheckoutUser.id="526"
CheckoutUser.title="Ian Howe"
CheckoutUser.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_78,type=smtp'/></a>"
CheckedOutUserId="526"
IsCheckedoutToLocal="0"
Created_x0020_Date="0;#2014-08-22 09:47:01"
Created_x0020_Date.ifnew=""
ContentTypeId="0x0101000AE0EC76CD0DB743B42D2FE022EAA6DC"
Modified="8/22/2014 10:51 AM"
Editor="<a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_79,type=smtp'/></a><a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a>"
Editor.id="526"
Editor.title="Ian Howe"
Editor.span="<a onclick="GoToLink(this);return false;" href="/sites/BPIT/_layouts/userdisp.aspx?ID=526">Ian Howe</a><img border="0" height="1" width="3" src="/_layouts/images/blank.gif"/><a href='javascript:;' onclick='IMNImageOnClick(event);return false;' class='ms-imnlink'><img name='imnmark' class='ms-imnImg' title='' border='0' height='12' width='12' src='/_layouts/images/blank.gif' alt='No presence information' sip='[email protected]' id='imn_80,type=smtp'/></a>"
ecb.dispex="return DispEx(this,event,'TRUE','FALSE','FALSE','SharePoint.OpenDocuments.3','0','SharePoint.OpenDocuments','','1http://myparkersdev.domain.com/sites/BPIT/_layouts/xlviewer.aspx?id=/sites/BPIT/Shared%20Documents/Database%20Sizes.xlsx','526','526','1','0','0x7fffffffffffffff','','')" />
I just find it strange that the old ListViewWebPart works. Our SP environment has not been patched to the latest version, I'll try that next and see if it makes a difference.

Issue with the pVal.BeforeAction in Item_Pressed event

Hi all,
I am facing an issue with the pVal.BeforeAction in the Item Pressed event.
In delivery notes, When I press the Add button, i am getting the control, which is passing through both of the if blocks [if (pval.BeforeAction=True)block and if(pVal.BeforeAction=False)].
But
When I try the delivery using Pick and Pack Manager form with in the Inventory Menu, I am getting the same Delivery form in Add Mode. When I click the Add button in the form, the control is passing through the if(pCal.BeforeAction=true) block successfully, but after that, the form closes and it never comes to the if(pVal.BeforeAction=false) block.
I need to run the codes, what i have written in the second if block, in this case also.
Is it possible?
Please help me to solve this issues.

Hi,
It's a known bug. As Rasmus said try the SBO2005A SP01 FormDataAdd Event.
Regards,
Ian

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Issue with filling out form fields in Safari?

Hello,
Has anyone noticed any issues with filling out form fields (specifically text boxes) in Safari 6.0.2 on Mac OS 10.8.2? When I attempt to test forms I've created, there is a delay when typing values into text boxes. Other types of input controls (check boxes, drop down lists, etc.) appear to work fine. As far as I can tell, this only occurs with Safari 6.0.2 in Mac OS 10.8.2. Prior versions of Safari do not have this issue, nor does Firefox in the same OS environment. When I refresh the form, the delay is not as noticeable. I'm searching the WebKit bug reports as well, but nothing seems to point to this issue. Any hints would be greatly appreciated.

From the menu bar, select
Edit ▹ Substitutions
and uncheck Text Replacement.

Hp Envy X2 issues with the touchpad gestures

I am experiencing some issues with the touchpad gestures after every time it wakes up. I am already update the drives posted in the hp web site, is anybody out there with the same issues?

I couldn't find any graphic drivers for that notebook, but here is an updated chipset that is available for your notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114872-1&cc=us&dlc=en&lc=en...
It was released 6 days ago, so it might enable that option for you. It can't hurt to try it out. If not, you might just have to hold out a little bit until they update the driver.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Anybody else having issues with the new 1.1??

For some reason, I have encountered two issues already.. Whenever I'm exporting my galleries as web pages, nothing happens! It creates a null folder that I specify but then doesn't export any photos or html pages.. If I delete the folder and do it again, the exact same way, for some miracle it then begins to export.. There is no logical explanation and its clear that its a bug..
Also, when exporting multiple images into CS2, that also fails for me.. It only opens up one picture and even though the others are selected, it doesn't seem to do the trick.. Its not my computer because i have a brand new quad w/ 4 gigs of memory.. I didn't encounter either of these issues with the older version..
Anybody else??

I tried both, and was successfull both times.
External Edit:
1. I selected 2 images (D200 RAW images).
2. Right clicked to get the contextual menu and selected Open with External Editor (I have my prefs set up for Photoshop).
3. Both images opened in Photoshop.
I can't image it being system specific. What camera and file type are you using?

Issues with the Surface Pro 3's pen in Photoshop CS6

I used photoshop CS6 with no problems on my old computer that was connected to a graphics tablet.
However, I recently bought a new windows computer called the Surface Pro 3. Everything works perfectly with the trackpad and touch, but I've had some issues with the Surface pen.
The pen can draw on the canvas, but whenever I click something on any of the windows with the pen, the entire application freezes and I would have to click the computer's taskbar at the bottom to unfreeze the application.
It's impossible to work like this. Is there any solution to fix this problem? It says that the version of photoshop I have is Adobe Photoshop Version: 13.1.2

If you have Photoshop CS6 version 13.1.2 which is the Subscription version of Photoshop, You shoule Isstall Photoshop CC 2014 on your surface Pro 3. It will work without problems on the surface Pro 3 and you will also have the option have the option to use Photoshop CC 2014 preference 2x UI to scale Photoshop's UI up in size on your Surface Pro 3.
If you do not have a subscription the Perpetual version of windows CS6 should be version 13.0.1.3. In that case the only way to scale Photoshop UI is to have windows do it. You would need to to update your windows 8.1 registry and add an external Photoshop manifest file in your Photoshop CS6 folder. To get the Surface Pro 3 pen to work with Photoshop you would need to install NTig pen device drivers the support the wintab APIs.
You will not be able to use Photoshop without a keyboard popping up the windows onscreen keyboard is too cumbersome. You can use a utility like Touchkey to create Overlay touch keys on Photoshop and use Photoshop without a keyboard.
The differece betweek Adobe 2XUI scaling an windows scaling ise windows scaling scalet the image areas as well as the Photoshops UI
A couple of touchkey overlat keyboards could look something like this

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

Design issue with the multiprovider

Design issue with the multiprovider :
I have the following problem when using my multiprovider.
The data flow is like this. I have the info-objects IobjectA, IobjectB, IobjectCin my Cube.(Source for this data is s-systemA)
And from another s-system I am also loading the masterdata for IobjectA
Now I have created the multiprovider based on the cube and IobjectA.
However, surprisingly join in not workign in multiprovider correctly.
Scenario :
Record from the Cube.
IObjectA= 1AAA
IObjectB = 2BBB
IObjectC = 3CCC
Records from IobjectA =1AAA.
I expect the record should be like this :
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
However, I am getting the record like this:
IObjectA : IObjectB: IObjectC
1AAA       :2BBB       :3CCC
1AAA         : #             :#
In the Identification section I have selected both the entries for IobjectA still I am getting this error.
My BW Version is 3.0B and the SP is 31.
Thanks in advance for your suggestion.

May be I was not clear enough in my first explanation, Let me try again to explain my scenario:
My Expectation from Multi Provider is :
IObjectA
1AAA
(From InfoObject)
Union
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
(From Cube)
The record in the multiprovider should be :
IObjectA     IObjectB     IObjectC
1AAA     2BBB     3CCC
Because, this is what the Union says .. and the Definition of the multiprovider also says the same thing :
http://help.sap.com/saphelp_bw30b/helpdata/EN/ad/6b023b6069d22ee10000000a11402f/frameset.htm
Do you still think this is how the behaviour of the multiprovider.. if that is the case what would be the purpose of having an infoobject in the multiprovider.
Thank you very much in advance for your responses.
Best Regards.,
Praveen.

Authorization issue with the HCM forms

Similar Messages

Maybe you are looking for