Authorization Issues with fresh Installation of BWI 3.10

Experts,
I did fresh installtion of BWI 3.10. After installtion I've loged on client 000 with sap* user and created new client. To the new client I've assigned sap_all profile. Under this new client I've created a user and assigned sap_all, s_new_46a0, s_new_50a0 profile. Loged on to BWI with the new user and trying run RSA1. It's giving me arror "You are not authorize to run transaction code RSA1". Matter fact this new user does not have any authorization to run any transaction codes.
Would appriciate any help in resolving this issue.
Regards

Hi I Am Having the same problems as you My HP Laserjet 1012 stop working after the update windows10.not only that I have some games that not working . So you are not the only one Me tooI my go back to windows 7 I was very satesfied. Thanks ZAG

Similar Messages

Authorization Issue with ODS

Dear all,
I have an authorization issue with two ODS.
One I activated for BEx reporting --> Is working fine in Dev, but I get error with
missing authorization in QUA, althought some authorizations.
Same issue with a newly created ODS, which works in Dev, but gives an error
with missing authorization in QUA.
What can be the reason for this? Any input is highly appreciated!
Cheers,
Claudia

Hi,
check that the role(s) are transported from your DEV and your QA, and that the user has the correct role(s)
Check as well in your QA transaction RSSM for your ODSs objects; it might be that by transporting the ODS, some authorizations have been applied by default.
hope this helps...
Olivier.

Issues With CS4 Installation on Win 8?

I purchased CS4 (Web Premium) on disc several years ago, and it has been working fine on my Win XP computer ever since. The Adobe software has all the current updates, though I am using the CS4 version of Acrobat Pro (9.xx) rather than a more recent (free) version of Reader.,
Unfortunately, my computer's hard drive has fried, and I just purchased a new Windows 8 machine, which will arrive shortly. I am trying to determine:
1. Are there any general issues with CS4 installation on Win 8 that I should know about in advance?
2. Are there specific procedures (de-activation?) that I need to follow BEFORE attempting the installation on the new computer?
3. Other than specific user issues, are there problems with CS4 versus Windows 8 that I would not encounter with Windows 7.
I enhance photos and create web sites for a living, so the CS4 installation is mission-critical. I am hoping I did not make a mistake in ordering a Win 8 machine...
Thanks for any and all insights.

OK, fair enough. Maybe someone who has actually experienced this situation (CS4 --> Win 8 machine) might see this and offer some tips to avoid hassles. But I will try the install as soon as I get the new machine and post any ensuing issues/problems here.
As for de-activation of the previous installation on the XP machine, that is now impossible, as the hard-drive is fried. Unless there is a way to de-activate an installation some other way (without actually opening the programs). That said, I AM able to access files on the fried harddrive, so if there is a specific file that controls de-activation, I could access it on the old machine. However, I may not be able to actually RUN said file on that machine, but can copy it to a stick and move it elsewhere. So, any thoughts on deactivation of an installation on a deceased computer?

Multiple issues with new installation

I have several issues with my fresh installation of arch (just got myself a free old-as laptop , thus trying out arch for the first time as I usually run gentoo), and I'm not sure where these should go. I figure that I may as well lump them all at once while I'm at it.
The laptop model is a Toshiba Dynabook TX/430DX Japanese laptop similar to a Tecra A2 afaik.
1. If I use stock ARCH kernel, when I load up x11 it seems to be using some wrong drivers or something. Tried with and without xorg.conf. The screen is all fuzzy etc. However, I compiled my own kernel (the Zen sources), took out a whole bunch of drivers I knew I wouldn't be using (etc. SATA/IDE/extra whatnot so that it would merely take 3 hours to compile the kernel), x11 works fine. HOWEVER with the zen sources, when I close x11 I can't exit to console. I get some sort of weird artefact from what happened to be on the screen, or it just goes black. It does actually seem to be in console as I can turn off the laptop with ctrl.alt.del and the capslock etc seems to work fine. I'm thinking of recompiling the zen sources with the stock arch kernel config when I have the time just to see what happens, but I'm not too sure it'd help.
The VGA device is an: Intel Corporation 82852/855GM Intergrated Graphics Device (rev 02), using the intelfb module.
2. In most consoles I've used, if you type in part of a command then press ctrl.up/down, it autocompletes with previous commands you've run matching what you've already entered. However, in my install it brings me to the very first command in my bash history. How do I make it autocomplete previous commands?
3. When I use wvdial (I have a mobile modem), I get odd characters as shown in the screenshot posted.
I don't think it's a unicode issue, as ncmpcpp displays properly. This displays itself both in the console and in x11 (screenshot).
4. If I'm using the stock kernel and I stop wvdial, I get a whole bunch of kernel error trace messages. After this, anything that goes to dmesg will be displayed to whatever terminal I'm on (but not actually echoed, it gets overwritten if I change screen etc). Wvdial is also prone to crashing, sometimes taking out the whole laptop. However, while using the zen kernel I do not suffer this issue at all.
Any help in helping me find the source of these issues would be greatly appreciated. They're not showstopping issues, but extremely irritating nonetheless.
Thanks in advance.
EDIT: I created a zen kernel based on the arch stock kernel. Unsurprisingly, I still suffer from the x11 video issue. However, I don't have issues with number 4.
Last edited by ugugii (2009-06-14 00:57:37)

People are probably going to want to know the make/model of the lappy before they can
help.
Deej

[SOLVED]Some issues with fresh arch install.

I freshly installed arch after a pretty long period of time of using other distributions and forgot how many issues I have to deal with when using it.
Alsamixer does not detect my headphones when i plug them in...(does not mute / unmute automatically speakers / headphones)
And another issue with the xorg server i think, I have a notebook and after every reboot i have to look up after touchpad with xinput --list then --setprop <id>. How can I make it permanent? It's annoying.
Last edited by dede24ever (2014-12-27 22:11:08)

Add a command to toggle the auto-mute with the same key, perhaps?
Anyway, that command in my i3 set up does not effect the auto-mute mode so there may be something else going on in your system.
Ooops -- my mistake, my system does that as well...
Maybe something to do with pulseaudio -- I didn't have pulseaudio when I used i3 and I didn't notice that problem then.
EDIT: It might be wise to open a fresh thread for this specific problem -- be sure to use a descriptive title to get the attention of the sound experts (not me!).
Last edited by Head_on_a_Stick (2014-12-27 20:26:11)

Authorization issue with VA02 radio buttons

Hello All,
We are stuck at one authorization issue. The user navigates using tcode VA02.
1)     Execute Tcode -VA02=>
2)     2) puts order number # 100001 =>
3)     press enter =>
4)     press enter =>
5)     Screen: Change (Company Name) Return 100001: Overview =>
6)     Option: Display doc. Header details (looks like a magnifying glass beside PO_date) =>
7)     This bring us to Change (Company Name) Return 100001: header Data =>
8)     select status tab =>
9)     on Status tab lower end there is a button u201CObject Statusu201D =>
10)     Press it =>
11)     Come to Change Status :
12)     On this screen There is Status with status no. on the right side with 7 options
e.g:
u2022     1 BLK Approval Required for,
u2022     2 BL1 Approval for Credit,
u2022     3 BL2 Approval for material Replacer
We need to restrict the radio button access for user for which we are unable to find the authorization object.
Could any one help.
Thanks & Regards
gab

Hi,
Use ST01 to trace the user activities and check which objects its hitting when you click on those buttons, then you can restrict radio buttons using those objects.
I have'nt run the tcode myself and performed the steps you mentioned, but if you think its calling other transaction from those buttons you can manage tht in SE97, or add the t-code VA02 in the S_tcode auth object in PFCG.
Hope this should get you going
Thanks,
Vijay

Getting Computer authorization issue with 11.4!

When I try to synch my IPhone 5S on Windows 8.1 / iTunes 11.4, I keep getting a message that "This computer is not authorized for the apps that are installed on our iPhone" and when I de-authorize and authorize it again, it still does not work...keep getting this message...

Hey Ashfromsea,
Thanks for the question. I understand that you are experiencing issues with iTunes Store authorization. The following resources may provide a solution:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks,
Matt M.

Computer Authorization issue with iTunes 11.4

When I try to synch my IPhone 5S on Windows 8.1 / iTunes 11.4, I keep getting a message that "This computer is not authorized for the apps that are installed on our iPhone" and when I de-authorize…

Hey Ashfromsea,
Thanks for the question. I understand that you are experiencing issues with iTunes Store authorization. The following resources may provide a solution:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Thanks,
Matt M.

Authorization issue with Inbound Delievries

Hi,
Can we control authorization of Inbound Delivery creation/Change (VL31N/VL32N) based on receiving point or storage location.
Currently we are only able to control authorization at Plant level which is wide open and client needs restriction at Receiving Point or Storage Location Level.
Let us know the Autho Object to resolve thie security restriction issue.
Regards,

Hi,
As i know, we can control the authorization at the Receiving Point level, but i am not sure about the Storage Location level.
You need to check the authorization object with Basis people.
Thanks
Aktar

Authorization issue with upload functionality

Hi,
I have issue with authorization with upload functionality.
we have country as authorization relavant field. if we are giving some country authorization to user it is giving authorization error at upload functionality.
But if we give all country authorization than it is working fine.
Could you guide me how to avoid this situation. We can not give all country authorization to all the users.
Thanks,
Naman Shah

Hi Naman,
For SAP BPS
Here while defining a variable you can set the user authorization and can determine which all records can be seen by the user.
For eg. Create a variable for country with replacement type User-specific values. Here you can assign values to a particular user id.
Please check for more details:
http://help.sap.com/saphelp_nw70/helpdata/EN/43/548bafbc0f357ee10000000a11466f/frameset.htm
For SAP IP
Please Check: User Authorization in SAP IP
Regards, Rishi
Edited by: Rishikesh Sinha on May 6, 2009 8:01 AM

Sap bi authorizations issue with query designer..

i am using bw 3.x and bi 7 query designer with different kind of probs?...
i am able to see the info provider in query desinger 3.x. but i can see only cubes .i am not able to find dso or infosets or multiprovider.. can anyone suggest is there any authorizations issues..please suggest.
and with BI 7 query designer i am not able to see info providers in info areas folder to design a query..
please suggest if any authorizations should be added or not

hi suman chakravar,
thanks for replying,
can u be little bit clear about the steps.
i went to tcode su01 and entered profile 0bi_all..it doesnt work.
and executed tcode su56.there i can find list of BI related authorization profiles
i added s_rs_all profile to my user. even then i face the same problem.
i can see only queries in query designer of bi 7 format and i can not view info providers.
i can view only cube and infosets and i can not view dso and multiproviders in bw 3.x type query designer
Edited by: satishchow on Dec 14, 2011 3:23 PM

Same Photoshop CS2 activation issue with new installer also.

Dear Adobe support team, we have downloaded the Photoshop cs2 from the link http://www.adobe.com/downloads/cs2_downloads/index.html. As per your suggestion I un-installed the older version and installed new version and tried to activate the product. But I have failed to activate as per your instruction. I want to get rid of activation message. Kindly also let us know what all do we have to un-install before the fresh installation.

Thanks for your support.
We are able to active CS2 in administration login. Now there is no activation message.
Now there is a different message window popping up. Every time I launch Photoshop CS2, the adobe updater message is popping up. I am not able to take screen shot of the window. We tried deactivating this in msconfig options but no success.

Authorization issue with iPod after replacing main computer hard drive

Anyone know how to fix an authorization problem with iTunes? I've purchased several songs from them over the past couple of years, as well as the entire first season of Weeds. I just replaced my main hard drive since my old was going kaput, reloaded iTunes, imported all of my files (I had them backed up on my storage drive) and now it's telling me over 200 songs (and all of Weeds) cannot be loaded into my iPod because I'm "not authorized to play them on this computer." Anyone else run into this problem? Will contacting iTunes service help, or will they basically tell me to deal with it? I've tried clicking "Authorize Computer" under the Store tab, which seems to work until I actually try to resync my iPod, at which point I get the same "Not authorized on this computer error."
Also, for whatever reason, It asks me to set up my iPod as if it had never been connected EVERY TIME I load it up, despite the fact that all of my preferences remain where I've set them.
Needless to say, it's driving me crazy, and if anyone knows how to fix it before I end up waiting on a support line, I'd appreciate it.
I'm running the newest iTunes (Downloaded today - 7.0.2) on a 30GB 5th Gen iPod with software 1.2.1
Thanks!
-Ben

Try playing one of them from within iTunes. It should ask you for your password. After entering it in you should be able to play them on iTunes and they should sync to your iPod.

Authorization Issue with Custom Pending Value Object and Anonymous Users

Hi,
I am just converting my demo from version 7.1 to 7.2. I am not doing upgrade. The demo uses a custom pending value object USER_REQUEST. The idea is that new employee goes to Java AS as anonymous user and enters her details and store where she will work. After submitting request there is an approval process using custom entry type USER_REQUEST. If the request is approved then IdM converts USER_REQUEST into MX_PERSON entry. This works nice in 7.1 but I am having problems with replicating this in 7.2. I created new UI task accessible by anonymous that creates new USER_REQUEST entry. I also assigned role idm.anonymous with UME action idm_anonymous to UME built in group Anonymous users.
My problem is with the field STORE. This field is a reference field to another custom entry type STORE (this entry type will be used in context based assignment). Every new employee must selects a store where she will work. The problem is when user clicks on button "Select". Web dynpro terminates and returns authorization error. I also tested this with entry type MX_ROLE. I added attribute MXREF_MX_ROLE and same issue. So it seems that just assigning UME action idm_anonymous is not enough to list objects from identity store. I found a workaround for this issue. When I assign also UME action idm_authenticated to Anonymous users then it does not dump and I get a pop up window where I can search for store. It does not seem right to assign idm_authenticated to anonymous users.
Another issue is with display task for entry type USER_REQUEST. I assigned a display task to entry STORE and I set that Anonymous have access to this task in Access control tab. I assigned default value to the field store. So when a user opens page she can see a hyper link to display already assigned store. When user clicks on this hyper link it opens a new pop up window and user must authenticate against Java AS. After successful authentication the display task for entry STORE is displayed. I would assume that anonymous user can display it without authentication.
So to me it seems like authorization checks have been changed in 7.2 versions and are more strict for anonymous tasks. Hence my question is how can I implement my scenario. Am I missing some configuration or what's the proper solution to my two issues? I don't count assigning idm_authenticated to Anonymous users as a solution. This workaround does not solve my second issue.
Thanks

Some of the folks from Trondheim labs check, but rather infrequently. There's another person who I guess is in consulting that also checks from time to time.
Sorry I can't help you with your main question...
Matt

Authorization issue with report on "Char data target"

Hi,
we've a characteristic ZCHAR inserted as data target.
user is not able to execute a report created on this "Characteristic data target".
error is as follows : "Error : You are not authorized to use ZCHAR".
Could some one advise how to resolve this issue & what authorizations need to be assigned to this user.
<b>PS: same user has no problems running other reports created on infocube & ODS.
also, this characteristic data target is not "authorization relevant" in the info object definition.</b>
appreciate your help.
I've following profile assigned to user.
S_RS_ICUBE - Administrator Workbench - InfoCube
Activity   :                     All activities
InfoCube Subobject :             All values
InfoArea           :             *
InfoCube           :             *
Hari Immadi
http://immadi.com
SEM BW Analyst

Gova,
thanks for your reply.
profile doesn't have any authorization object S_RS_IOBJ.
looks like this is the problem.
I quickly tested with this object on a dummy profile & it worked with following settings. Is this correct just for reporting?
Object S_RS_IOBJ
Activity                       Display
InfoObject                     ZCHAR
InfoObject catalog             *
Subobject of InfoObject        Data
Hari Immadi
http://immadi.com
SEM BW Analyst

Authorization Issues with fresh Installation of BWI 3.10

Similar Messages

Maybe you are looking for