Authorization message in Work center

Dear friends !!!
I am having one problem with my work center, in my mail box whenever i receives the leave approval request i need to approve it, and it goes back to time administrator, but here It gives me No maintenance authorization for the cluster exists message, please tell me what is worng in my case and how i rectify it. ( Do i need to have authorizations for PA61, I ma having ESS).
Thanking you
Regards
Naeem

authorization problem

Similar Messages

Please help me regarding VAR customer create new message in work center

Hi, guru
I have encountered with a problem regarding, for example, when VAR customer 'X' create new message in work center and specify message processor to partner no '1' (partner no 1 has employee role with username 'A' in BP) but when username 'A' log on and open work center via SAPGUI to find a new message created to him, username 'A' did't got a new message from VAR customer 'X' whom choose specify message processor to him and work center show My Messages (0)
why, do I set something config wrong ?
Any recommend would be appreciated
thank you very much

Hi
1) can you check in CRM_DNO_MONITOR and oepn the ticket , whethere the processor name appearing in the ticket?
2) Does your customer assign the processor manually or any automatic support team assgnemt, if so please verify your automatic support tean assignment against the blog
[/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination|/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination]
3)Might be an authoraisation issue of the Processor. assign SAP_ALL access and check again
[Service desk roles|http://help.sap.com/saphelp_sm32/helpdata/en/0a/f12c41ab78f66fe10000000a1550b0/content.htm]
Thanks,
Jansi

System Error Message CR082-Work center with ID 10000005 was not found

Hi SAP Gurus,
We are getting the error message 'Work center with ID 10000005 was not found' while our finance guys trying to do costing run for our two plants together. But when they run the costing for two plants seperately then it is working fine. Because of the business needs they have to do the costing run for both plants together.
"The description of the error is as follows:
System error: Work center with ID 10000005 was not found
Message no. CR082
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your ERP System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error"
Any idea how to solve this issue.
Thanks.
Sachin

Hi,
Kindly check with following SAP note for Message No. CR082 :
[Note 157682 - Message CR082: Work center not found|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=157682]
Try with implementing this note which may resolve your problem.
Hope this helps.
Regards,
Tejas

PP IDOC Message for Work Center upload with Costing

Hi all,
I'm looking for apropriate IDOC message type to import Costing data with Work Centers.
I found some of them to pass WorkCenters data, the best is LOIWCS I think, but I don;t see a possibility to passing costing data. ( e.q. KOSTL domain field)
Any suggestions? Is there any other IDOC to pass Costing data for WC's?
Thnx in advance
Tom
Edited by: Tomasz Szofer on Jan 24, 2011 12:48 PM

Dear Nixal,
Assume this 10 hours is for some base quantity and this value gets changed based on operation(order quantity) means,you can
check with standard SAP formula SAP006 = Machine * Operation quantity / Base qty.
In case if the duration 10 hours is for any operation quantity means,then there is no relation between base quantity and
operation,so you have to assign a formula which has only duration alone.
Likewise you can decide and select the suitable formula and use the formula key in the costing tab to calculate the cost based on
the formula selected.
Regards
Mangalraj.S

Creation of person responsible in CR01 (work center creation)

Hi
During the creation of work center (CR01). The following details are entered before i get the error message
1) Work center and its description
2)Work center category
3)Usage
4)Backflush
5)Standard value key
But i am unable to enter the PERSON RESPONSIBLE field (Message is NO VALUES SELECTED MAINTAIN ENTRIES).... if I am selecting yes with this message it is routing me to Choose Customizing project.
Please help me creating person responsible field
Thanks in advance
Rupesh

Dear Rupesh,
press F4, then for maintain entries press yes
then enter on continue w/o specifying project
then it's take u to location
here double on any or PP work center
then new entries
and specify one name here
then back, back & back
now u can get the name here
ADDED
maintain directly in T-code OP10
here go for new entries
give ur plant & person name
this should solve ur query
Regards
kumar
Edited by: kumar kumar on Sep 5, 2009 9:37 AM

Work center's migration by POIM

I should migrate work centers from R3 to R3 and I would prefer not to use LSMW. I tried doing it by POIM but all I obtained is an IDOC I can't upload by the POIL. I think the problem concerns with the procedure (ED00, ED08) you have to use for the message LOIWCS (work center for POIM)...
How can I upload that IDOC?

Hey I am also facing same problem.
Did you get any solution?
Thanks
Shital

Creation of work center CR01 (error message in last page)

Hi
During creation of work center .After all the configuration being done ,in the last page the error message displayed is (ACTIVITY SET CAN NOT BE ALLOCATED TO 2009).
Some of the major setting done in the last page is
This is Costing Lab
1) work Center
2)Activity description (Like set up, Machine and Labouring)
3)Selection of activity type
4)Preferred Unit
Per
After this when i save the error message is displayed mentioned above (Message number is KL008)
Please help ....!!!!!
Thanks in advance
Rupesh Jha

Dear Rupesh,
1. Please enter the CCtr categories value as "*" in the basic data tab.
1)in KL02 for this particular activity type give as *
2. Enter ATyp category field value ar "1" in the basic data tab.
2) in the field A type mainatin -1
3. Actl Acty Type Cat field value as "As in planning".
in this field also mainatin as 1
YOU MUST SPECIFY A COST ELEMENT FOR ACTIVITY CAT 1
first creat a cost element in KA01 (pramairy) & in KA06 (secondry)
then asiign in KL02 for the required activity types
Regards
kumar

Message no. IW056 Work center change -- default data redefined

Hi,
After EHP5 Upgrade. I am getting Message no. IW056 Work center change --> default data redefined during Maintenance Order Change (IW32). Please suggest me Is their any SAP Note or any Configuration setting to fix it.
Regards
Maheboob
Please use [Enterprise Asset Management (EAM)|Enterprise Asset Management (SAP EAM); forum for PM/CS specific topics
Edited by: Paul Meehan on Oct 25, 2011 11:56 AM

Hi Maheboob
Im glad the note worked -
To find the note , you could do a note search on the message IW056 you received and the support pack level you are on ..
For EHP5 the note is valid up to SAPKH60504.
The IW056 is listed as a keyword so if you search on it the note should be returned.
Thanks-
Enda.

Work Center specific Authorization

Hi all,
My specific requirement is we have 7 various plants and each plant having 2 work centers and planner groups like one is for Elect and other is Mech. Now my client wants that particular plant only have the authorization for its particular work center and planner group.
Means if plant 1 having work center Elect1 and mech1, this plant is not authorize to make notification or order of plant2 work centers say Elect2 and Mech2. Is it possible? What am I suppose to do for that?
Thanks,
Anish

Hi Anish,
Nothing is required to be done by Functional Consultant. You just need to contact your basis team.
You have to provide him role/profile for which you want to change authorization for auth object C_AFVG_APL.
This auth object will have fields as below
1) Plant
2) Work center
3) Action
The following values are used for the actions:
01: Create
02: Change
03: Display
41: Assign PS texts
42: Allocate materials
43: Assign PRTs
44: Assign activity elements
You need to tell him for your role/profile - which plant, which work center and which action should be allowed.
So accordingly user will have only those limited authorization.

CO11N: how to perform confirmation entry authorization per work center

During production order confirmation entry authorization per work center is required however the standard authorization object for the confirmation Is only per plant and order type

Hi,
Yes, you are correct..
There is no check for the workcenter, unlike for Network Orders..
But, you can use the User Exits:
CONFPP02 PP order conf.: Customer specific input checks 1
CONFPP03 PP order conf.: Cust. specific check after op. selection
CONFPP04 PP order conf.: Customer specific input checks 2
for your own chcks at the time of confirmation..
Take the help of your ABAPer..
Regards,
Siva

Error message when creating a Work Center

Hello
A new machine was bought recently. When trying to create a new work center with CR01 by copying an equivalent one, an error message appear in tab u201CCostingu201D, saying that u201CActivity Type L003 not set up for cost center 02 13730u201D. How is it possible affect activities the new cost center 13730?
Thks for hints
sb

Hi STANISLAS BRESIN,
You have to setup activity type for this work center.
You need to maintain rare for this activity for current year.
Transaction code :KP26
Enter your Controlling area, Period as 1 to 12, year as 2011, your cost center and Activity type as L003.
In overview, maintain rate in the variable rate column and Fixed rate column.
Regards,
Abhay Kapase

Error message when blocking a Work Center

Hi,
In order to block the use of a workcenter, it is recommended to go to cr02 and change u2018usageu2019 field to u2018000u2019 All task list types (see previous topic To block the use of a specific workcenter)
When changing usage to 000, an error message appears : u201CThe work center is already being used, update task listsu201D. How could it be fixed? thanks
sb

If you don't want that operation , Then
Go to CA80- work center where used list
find out the routing, and delete the respective operation in routing.
Or
If you don't want the delete the operation, Then
In workcenter , CR02 Go to Extras-->status set lock
While creating a new production order, system won't copy the locked workcenter

Customizing message creation in work center

Hi all,
we have to change the layout of the message creation window in work center (Web Dynpro Component: AGS_WORK_INCIDENT_CREATE)
I've tested the enhancment functionality quite a bit, but i was not able to solve the problem.
Basically we have to add fields to the layout which correspond to the fields in the support message that should be created.
Example: The support message (ZLFN) contains a field "approver". This field has to be on the screen when creating a message and the value should transported into the created message.
Can you please tell me the basic points of how to do that.
Another way i thought about was linking direct to the blank ZLFN message (coressponding to crmd_order), but i could not find a way to do that. Maybe this is possible?
Any help would be really appreciated.
Best Regards
Daniel

Hello Daniel,
Please, check the following link:
https://websmp105.sap-ag.de/~sapidb/011000358700000601362009E/WORKCENTERCUSTGUIDEVALE_EX.PDF
I hope that this link can help you.
Best Regards,
Diego Fischer,

Work center wise authorization

Hi all,
Our client requirement is restrict users from doing operation confirmations on limited operations which are linked to certain work centers.
For ex. If D10DDL, D20DDL, D30DDL & M10PPL, M20PPL, M30PPL are work centers. The 'user 1' is allowed to do operations confirmations in which D10DDL, D20DDL, D30DDL are there. Other than 'user 1' no one should be allowed to the confirmations of D10DDL, D20DDL, D30DDL. Same with 'user 2', he should allowed for operations in which M10PPL, M20PPL, M30PPL are there.
How to map the same? Kindly help. Useful answers will be rewarded.
SmanS

Hi SmanS,
I am not a basis person, so i really cant give you a step by step procedure. But in general it is done in PFCG t-code, the object has a few fields & in this case the object -> C_AFVG_APL has fields WERKS, ARBPL, PS_ACTVT.
So you need to assign the values of work center to ARBPL & plant to WERKS, then create different profiles & based on your need, have to assign it to the respective users. Also you need to ensure that this object is checked in the respective t-codes.
Well if you feel you have got a solution which you can work on, award points & close this thread & check the basis forum, maybe someone there can help you.
Regards,
Vivek

How to restrict authorization based on profit center in ke80 report

hi friends
we have a situation where we need to maintain the authorization based on profit center in ke80 report. The authorzation object K_PCA is not working. whenever we assign a particular profit center and then generate the profile, we still get the message no autjorization and when we check su53 it shows it needs '' asterisk. but we cant assign the asterisk as we have 5 subsidaries and there are using 5 different set of profit centers so assigning asterisk () would be comprimising on our security.
does anybody came across this situation and if yes how did they resolve this?
I need your suggestions on how to maintain this restriction.
Regards,
Imran

Hi Friends
The problem has beend solved. It turns out that this is a report writer issue. We raised the issue with SAP and they informed that 'For Report Painter/Writer every item is checked if you have the authori-zation or not. Only the items with authorization fullfilled will be displayed afterwards'.
Based on SAP answer we created different reports for each profit center/company code.
I would like to thank you all for your time and inputs.
Regards,

Authorization message in Work center

Similar Messages

Maybe you are looking for