Authorization needed for SAP BP Business Warehousing - V3.70

Hello,
I want to install SAP BP Business Warehousing - V3.70 on an ECC system and a BI system. Does anybody know what authorizations I need to accomplish the installation?
Thanks in advance!!
Kind regards, Ton

Hi all,
Iam really waiting for someone to see and get the logic right for this code.Iam completely stuck up. i need ur help
Thanks

Similar Messages

Sizing for SAP BCM (Business Communication Management)

Hi All
We have to provide a server sizing to be used for SAP BCM (Business Communication Management) module which will be intergrated with SAP CRM and is to be used for call support. As far as we have reached, we require a Windows server and will host MS SQL database with an approx consumer data of 63 lacs consumers.
Please specify the sizing for this server
Thanks in advance
Lokesh

Sorry, forgot to ask how much physical memory you have on each host.
Let's split it to 2 topics.
1. For ECC, since OracleDB and non-unicode page which are the 2 major factors won't be changed, so I would think here we could just do a math, as long as host A has enough memory which is allocated for Oracle and ECC (extended memory) on host B to be added up.
2. For EP, memory tuning size is basically the same for HP JDK and SUN JDK, that each server node is allocated approximately 2.5GB RAM. Besides, 0.8-1GB RAM needs to be left for OS kernel. But in your case, host B is currently holding 200 users which is a big jump for host A(note: only active user quantity matters here).
That's fine if main physical memory is a little short for host A, utilizing multiple less powerful servers as 2nd tier application server to do the load balancing is also a solution with lower TCO.
Regards,
Effan

Special authorization need for read cluster table??

In one report, I use following coding to read information from RFDT table:
form get_f110_parm .
f110id-laufd   = p_laufd.
f110id-laufi   = p_laufi.
f110versionpar = space.
clear:   buktab, fkttab, slktab, sldtab, trctab, usrtab,
           faetab, jobtab, f110v, f110c, trcopt, f110versionpar.
import buktab fkttab slktab sldtab trctab usrtab
         faetab jobtab f110c trcopt f110versionpar
         from database rfdt(fb) id f110id
         accepting padding.
endform.                    " GET_F110_PARM
I can fill F110c, trcopt and f110versionpar by this program. But there is no entry in table like fkttab, usrtab.
Is there any authorization need for read cluster table??
Thanks in advance.
Edited by: Amy Xie on Dec 21, 2010 10:41 AM

Hello,
After you run your code, check transaction SU53 to see if any authorization check failed.

Authorizations needed for MAM 2.5 for RFC user and business users

Hello all,
We are using MAM 2.5 application but we are facing authorizations issues.
It seems we have not enough authorizations on RFC user used between middleware system and back-end system located on the RFC destination MAM on the middleware.
And we don't find any SAP document related to this customizing.
Moreover is there any other or same document deals with authorizations needed on the back-end for each user using MAM on its mobile device ?
Thank in advance,
Eric GOURDOU

Hello,
Can you send me the errors you have?
If you have a trusted connection, then each users need the authorization S_RFCACL .
Other than that, I never had to set any authorization for the plant maintenance scenarios of MAM.
Thank you,
Julien.
msc mobile Canada
http://www.msc-mobile.com

Roles and Authorization strategy for SAP BIBO

Hello All,
We are doing an implementation where Source is a Oracle, SAP BI warehouse and BO XI3.1 as reporting solution.
Our customer has asked for the authorization strategy that will be implemented in SAP BI. Currently the users belong to different companies or plants or countries
Current structure is like,
User 1 belongs to Plant1 of Country1
User 2 belongs to Plant2 of Country2
user 3 belongs to Plant3 of Country1 etc..
We have more than 500 users who will use the reports. The user belonging to a particular plant should only see the plant data/Country data he belongs to.
As I understand, we need to create the roles in BW and these roles to be imported into BO to use for the row and column level security.
The options we considered are,
1. Use Bex queries in BW to with ABAP code in CMOD to identify the user belongs to Plant 1, 2 or 3 and provide necessary authorizations.
2. Create user groups based on the country or company they belong to and create as many roles as required. This will however impact the maintenance of so many roles in the BI system.
We are also forced to avoid Bex queries in BW and hence, trying to connect Multiproviders directly in BO universe.
How should we go forward in designing the authorization concept? Any better ideas?
Thanks and Regards,
Srinivas

There are two ways which we can implement this kind of authorization based on my knowledge.
1. Data Security purely at BW
If the data is secured based on roles and users, there is no need of additional authorization from BO side except at report and folder level if you go for SAP Authentication.
Once you use SAP authenication and enable single sign on option in universe connection, the SAP users can access data based on their profile set at BW.
2. Data Security from BO
Let's assume that, if nothing is set at BW and every thing to be take care from BO.
Then you could create one multiple provider for each plant / country. Create one connection for each multiprovider
Create restrictions (Tools--> Manage Access Restrictions) for each plant/country. There you can change connection names.
So you would need to create many restrictions for different permutations and combinations.
I never tries this option with Multiprovider. But It worked well with NON-SAP data.
Hope this helps!
Regards
Gowtham

Guidence needed for SAP Carrer (IS Retail+SD)

Hi All,
I am planning to change my Career path from IT Analyst to SAP IS RETAIL Consultant. I am Currently working in retail company (UK Retailer) from last 4 years as IT Analyst involved in Mapping business requirements and Implementing new systems etc.
I don't have any experience in SAP, I am planning to join Certification course for SD+ISRETAIL and I Checked with one of SAP Authorized training Center and got overview of IS RETAIL.
Retail industry is booming accross the world (including India) i think there will be enough opportunities for SAP IS Retail Consultants(this is one of the reason for changing Career path) . I believe experience i have gained in retail domain from last four years will be useful in implementing SAP IS Retail to suit client requirements.
I would request your guidence and suggestion on this.
Regards
Natraj

Hi,
I feel you have made a genuine plan. As you have good industry knowledge you should be able to grasp the concepts easily. You experience in Retail industry can help you in your job search.
In india you can target cos like IBM, Accenture which have big SAP Teams.
I feel you should go for IS Retail certification, not sure why you wanna do SD.
Cheers
Barry

If any professional degree need for SAP HANA 1.0 Certification learning?

Dear All
I am Janakiraman and interest in SAP Hana learning and Certification...i am not Professional graduate...i have technical diplomo only..any professional degree must for SAP HANA 1.0 Certification learning?

Hi
Yes, if you are planning to install new system(BW 7.3). No need for migration or use oracle DB.
BW 7.3 on HANA, where HANA will work as DB for your BW 7.3.
Hope you already have advantages of using BW on HANA.
Regards,
Venkatesh

Zgate abap development inputs need for sap mm point of view

Hi All.
Loooking for sap mm zgate module inputs.
Thanks in advance sap mm forum members.
Regards.
Parameshwar

ABAPer with some functional inputs helped to develop it
Edited by: paramerp on Aug 5, 2011 2:32 PM

Create Display Authorization Profile for SAP Transaction SPRO (IMG).

Dear All,
In my current implementation project there is an requirement to create display authorization profile for SPRO. I have tried a lot but was not able to do so.
Any one is having an experience in creating display profile for SPRO (IMG) ? If any one has worked on this issue then please guide me.
Thanks,
Avinash

Hi
This is security related question. I am not security expert.
But you can check this, Include the following authorization objects in the profile and assign this profile to the target user.
S_IMG_ACTV
S_PROJECT
S_PROJ_AUT
S_PRO_AUTH
and assign activity = 03 (Display).
Hoipe it helps.
regards
Srinivas

Urgent Need for SAP PS Trainer in bangalore.

Hi PS guys,
I represent a sap training institute in basaveshwarnagar, bangalore,INDIA.
we are urgently in need of SAP PS trainer.
Even if, somebody has just completed course will also do.
Contact us immediately at 0091-9901933886.
cheers.
santosh.
0091-9901933886.
Edited by: santosh koraddi on Jan 10, 2008 9:28 AM

Hello ,
What are the incentives ?
Regards
Keshav

Authorization object for SAP PO price change

Hi Experts,
Our customer has a requirement regarding PO Price change. The user should be able to create PO, Change the PO except the PO price once it putted.
What is the authorization object and authorization value for it ?
Can anybody help me?
Thanks
Asad

Dear Asaduzzaman,
You can achieve the same by creating transaction variant using SHD0 transaction.
I think below mentioned document may help you to resolve your issue.
How to Create a Transaction Variant
Regards,
Hardik Patel

S_DEVELOP authorization needed for CRM Web Client in SAP CRM 7.0?

We implemented an own WebUI component in SAP CRM 2007 and use it in others components (with USAGE).
After we transport the component in SAP CRM 7.0 we always got an error CX_BSP_DLC_CONFIG_GENERAL_ERR at loading the component. But if we set the permission to SAP_ALL all thing work fine.
In SAP Note Nr. 1367944 we read:
"It is not possible to run the CRM Web Client without the S_DEVELOP, activity=03
authorization because it is needed by the Web Client Framework.
The S_DEVELOP authorizatin is part of the SAP_CRM_UIU_FRAMEWORK PFCG role, which must
be assigned to every user."
"This dependency has been removed in CRM 7.0."
Do we need to install some other SAP Notes at SAP CRM 7.0?
Many thanks for advices!
Handri Gunawan

Hi Handri,
I asked my collegue here, who created the note.
The note is correct, in CRM 7.0 you do not need S_DEVELOP anymomre.
The error that you have might occur because of another reason.
Could you track the call stack of this exception?
And send me back the call stack?
Regards,
Steve

Need for helps in Business Warehouse

Hihi,
I would like to request for experts out there to help me up on this problem:
Step 1 : From Business Warehouse, i tried to pull the records (infopackage) from ECC with the tariff code "abc123" -> failed
Step 2: I tried again by set the conditions to pull the records with tariff "abc123" and date : before april -> it is work!!
As per above description, it proved that the failure in data pulling is not because of the tariff code, does you all have any solution for me on this? I need this urgently.
[I confirmed the data for APRIL, MAY have no problem and in ECC (RSO2) - the function module do pick up those records (which didnt show up in BW site)].
Hope can hear from you all soon.
Edited by: MOPZ Narayanan on May 18, 2010 10:06 AM

Hello,
Are you getting any ST22 dumps while loading data? Please check ST22.
You may try to load data by reducing the data packet size. Go to(Infopackage) Scheduler -> Data Source. Default Data Transfer and reduce the packet size there. Also try loading it till PSA only and then load above.
It would be difficult to analyze why there is error for only 1 record but most probably it would be the packet size, so try reducing it.
Also go through the below forum discussions to further drill-down into the issue details:
[Caller 70 is missing]
[Caller 70 is missing]
[Re: Error Caller 70" is missing when loading delta to DSO]
Hope it helps.. All the best.
Regards,
Pratap Sone

Which ports are needed for SAP HANA Studio - HANA DB communication?

I want to connect SAP HANA Studio to a HANA instance. The HANA instance number is 40.
The SAP note 1592925 states that the ports 5$$13/5$$14 and 3$$15 should be open to allow communication between the HANA Studio and the HANA database. I even see the instance in the HANA Studio, but I cannot administrate it and the HANA studio gives this general "I don't want you to know what the error actually is" message:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-16 14:01:40.627
!MESSAGE [HDB hostname 40 (SYSTEM)] Error on refreshing system
!SUBENTRY 1 com.sap.ndb.studio.navigator 4 0 2012-01-16 14:01:40.627
!MESSAGE SAPControl request failed
!STACK 0
com.sap.ndb.studio.sapcontrol.SAPControlException: SAPControl request failed
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:118)
     at com.sap.ndb.studio.sapcontrol.SAPControl.getInstanceProperties(SAPControl.java:439)
     at com.sap.ndb.studio.sapcontrol.SAPControl.collectProperties(SAPControl.java:466)
     at com.sap.ndb.studio.sapcontrol.SAPControl.open(SAPControl.java:297)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.getSAPControl(SAPControlManager.java:108)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.getSAPControl(SAPControlManager.java:81)
     at com.sap.ndb.studio.sapcontrol.SAPControlManager.needCredentials(SAPControlManager.java:57)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.executeTrySAPControl(SAPSystemObjectUpdate.java:102)
     at com.sap.ndb.studio.navigator.operations.SAPSystemObjectUpdate.execute(SAPSystemObjectUpdate.java:63)
     at com.sap.ndb.studio.navigator.operations.UpdateSAPSystemOperation.execute(UpdateSAPSystemOperation.java:75)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperation.execute(DataModelOperation.java:67)
     at com.sap.ndb.studio.datamodel.controler.DataModelOperationQueue$DataModelOperationThread.run(DataModelOperationQueue.java:99)
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.call(Unknown Source)
     at com.sap.ndb.studio.sapcontrol.operations.SAPControlOperation.execute(SAPControlOperation.java:94)
     ... 11 more
Caused by: com.sun.xml.internal.messaging.saaj.SOAPExceptionImpl: Message send failed
     at com.sun.xml.internal.messaging.saaj.client.p2p.HttpSOAPConnection.post(Unknown Source)
     ... 13 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(Unknown Source)
     at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
     ... 14 more
Do I need to open any other ports to make HANA Studio work with HANA DB?
Regards,
Mark

Hi Mark,
The HANA Studio connects to HANA DB Instance with JDBC on port 3<Instance number>15.
For your HDB with Instance Number 40, the port would be 34015.
HANA Studio will automatically assign the JDBC port number when you assign the instance number when you add new system.
Looking at the error message that you posted:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-16 14:01:40.627
!MESSAGE [HDB hostname 40 (SYSTEM)] Error on refreshing system
It looks like the hostname entry was not entered correctly (you might have entered "hostname" value when adding the system in HANA Studio).
Here is an example of correct log entry on DCA database instance on hanasvr-01 server with Instance number 00:
!ENTRY com.sap.ndb.studio.navigator 4 1 2012-01-10 13:55:23.598
!MESSAGE [DCA hanasvr-01 00 (SYSTEM)]
You may want to delete and re-add your HDB instance in your HANA Studio.
Regards,
Ferry

Design Patterns needed for SAP XI

Hi

hi,
Here are the general step for designing for file to r/3 integration using IDOC,RFC
After doing this ull get good idea abt the sap xi designing
To Configure the FILE TO SAP R/3 OR SAP R/3 TO FILE, proceed as follows:
Step1:Repository
1      From the Integration Builder page, select Integration Repository. This will launch the Java Web Start Application. Log with the User id and password from the Integration Server.
2.      Choose Tools->Transfer from System Landscape Directory->Import Software Component Versions
      From the list of Software Component Versions, Choose your own software component version .Click Import.
3      On the left hand side frame ,software components will appear .Select your own software component. Open your own software component. Double click on this software component. A screen will appear .Switch to display mode. After doing this first add a namespace under Namespaces.
        The namespace should always begin with urn:
4.     Then choose the Radio Button ->Import of RFC AND IDOC interfaces from SAP systems permitted
     After this specify the connection parameters to the R/3 system:
     System : Name of sap R/3 system
     Client     : Sap R/3 client number
     These two fields are mandatory. You must Specify these fields.
     Then Save it. The new namespace will be visible under software component version node in the left frame.
     Under the namespace node, you will find the section Imported Objects. Right click on it and choose Import of sap objects. A wizard will display. In the wizard provide the following details.
Application server:IP address of sap r/3 system.
System number: Number of sap r/3.
User name: user name of sap r/3 .
Password: Password of sap r/3 system.
        Then click continue .You will find IDOC and RFC node. Click on this node and select the   Idoc or Rfc which is to be imported from R/3. Click Finish to start the Import. Close the wizard. After doing this the   Rfc and Idoc will be available into XI as Message types. So no need to create any Rfc or Idoc Structure. We need to create a structure for file only.
5.      Under your namespace in the left frame, expand the node Interface objects. You will find a node DATA TYPES
6       Create new data types.
        Right click on Data types and select New. Give a suitable name to Data Type(DT_datatype). In the data type Editor ,Create a structure having Elements of type String , integer, Boolean , Float etc as per the requirement.
        Save the object.
6.2     The Import function for XSD files enables you to upload message definitions from external sources. The object type External Definition is a container to make external definitions available in the Integration Repository.. While Importing the XSD files from External Definition
        no need to create Data types. They are imported directly as Message types.
        To do so, In the left hand frame Under Interface objects Create a new object of type External Definition and give name to it.
     Select the following.
Category: XSD.
Messages: From All Available Global Elements.
File: Here we need to specify the file name(file.xsd)
     Once the XSD is imported, click on Message tab , You should be able to see 2 messages(Request and Response)
7.      Create a new Message Type.
7.1      In the left hand frame under Interface objects, right click on the Message types and select new.
7.2      Give a suitable name to the Message type.(MT_ messagetype).
7.3      For the section Data type used you can go to input help (F4) or Search help provided and choose your data type (DT_datatype) from there.
         Save it.
8.         Create a Message interface from the left frame and name(MI_ messageinterface) it.The interface Should be Inbound or Outbound and mode should be Asynchronous .It should reference your Message type(Use F4 or Search help).
           Save it.
9.         Create a graphical mapping between the target document and the sender .
9.1        In the left hand frame ,expand Mapping objects. Right click on Message mapping and name it.You are now in a graphical editor.The Source message is on left, the Target message is on right.
9.2        As Source message select your own Idoc , Rfc or Message type.You can choose Search for Integration Object.As a reminder you can find your Idoc or Rfc under Software Component- >     Namespace->Imported Objects.
9.3      As Target Message you can choose your Message type or Idoc, Rfc .Choose Search for Integration Object.
9.4      Now that we have defined the Source and Target message, we can start defining the Mapping rules.
9.5      Map the fields of Source document to the equivalent fields in Target document .This can be achieved easily by locating the field in Target document and then Drag and Drop the   Source fields to the respective Target Fields.
     Save It.
     You can also Test your Mapping by selecting the Test Tab.
9.6     Fill in the values in the Idoc fields and click Start Transformation. On the right hand side you will see Target Document populated with the appropriate Values.
10.      Create an Interface Mapping.
     In the left hand Frame expand Mapping objects. Right Click on Interface Mapping and Name it. You are in a Interface Mapping Editor .Assign the following References.
Source interface : Your Outbound Interface (Idoc from the Software component Version).You can Choose Search for Integration Object.
Target interface:    Your Inbound Interface( The Target document interface).
     Then Select Read Interface and Assign your Mapping Program .
Mapping Program: Your Message mapping.
     Then Save it.
11.      Finally , in the left hand frame ,go to your change list and Activate it.
Rewards points if helpful
Vikas

Authorization needed for SAP BP Business Warehousing - V3.70

Similar Messages

Maybe you are looking for