Authorization newly created user

hi experts,
can any body explain, what infotype/authorization will be required for newly created user of HCM.
Thanks,
Waqas
You should first go through the
[SAP Help|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/48/efa441d54eae5fe10000000a1550b0/frameset.htm]
& then seek help for specific issues. Please do not post vague questions.
Edited by: Suresh Datti on Aug 13, 2009 5:10 AM

Hi Waq,
Infotype access can be given based on client requirement. What ever infotype they will be using for their requirement you can add under role. Role can be created via Tcode PFCG. There are 2 objects named P_ORGIN & P_ORGXX can be used for giving infotype access under firld INFTY.
Then creaed role can be assigned to user via Tcode SU01.
If you want to give Tocde access, then authorization object P_Tocde & S_Tcode can be used.
Regards,
Purnima

Similar Messages

Permission to view content of table of SYS schema to newly created user

Hi,
I am facing issue giving permission to view contents of table p_users of SYS schema to newly created user.
Regards,
Phani Ram

Hi Phani,
Could you please check if you have an a authorization to give a permission to other users for particular schema.
I mean check for privileges, user and roles.
Warm Regards,
Earesh kumar

Need to automatically add newly created user account in an existing active directory group.

Hi All ,
In my environment we are having window server 2012 active directory environment.We need to have the newly created active directory user account to get added automatically to the existing active directory group after that new user account creation.
Please tell us the possible ways to achieve this scenario.
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Hi,
Can you please confirm your requirement,
When you create a new user account in AD, based on the user's property like Department, Job or Location, the user need to be added to your specific AD groups?
Regards,
Gopi
JiJi
Technologies

Newly created user accounts can't log in??

I've got a 5 year old who is starting to use my computer for game playing, typing notes, and simple web stuff.
I want to set up a user account for him with parental controls so he can't randomly rename, delete, or change things.
I've followed the directions, set up a user account, given it a password... logged off my admin account ...
and when I click on his login picture, it brings up the password window, and when I input the password, it just gives a little shake, clears the password line, and lets me try again.
I've deleted that account and created a new one without parental controls. I've tried having NO password in the password line. I've tried making sure the short names for the accounts I'm creating are exactly 8 characters. I've turned off Norton antivirus. Nothing works - I cannot log in with any newly created account??
What else can I try?

Sara
Well you probably don't need to be told the NetInfo database is in a bit of a mess, but the significant thing is the "No such file or directory" from the last two commands. Basically this is where passwords are stored (encrypted) since the system changed to "Shadow Hash" passwords in 10.3.
Your account seems to be OK since it predates this change, and when you installed new system versions you chose the "Upgrade" option which left your settings alone. This is why your primary group is 'staff', or 20, whereas for Will it is creating a group 'will', or 502. That bit appears to be working, just not the passwords. Your password still works because it is in the old 'passwd' file (in encrypted form).
By far the best thing, at this stage, would be to do an Erase and Install, but this depends on you having a complete and up to date backup of all your files. See Mac OS X 10.4: About installation options. Alternatively you might try an Archive & Install, see Mac OS X : About the Archive and Install Feature, probably not choosing the "Preserve Users and Network Settings" option. But note this requires you to backup a lot of your data, and then re-enter settings and so on.
If you have a backup, the Migration Assistant can help you get your files back in place.
If it were my machine of course, I would probably carry on a bit longer trying to fix things, but the appearance of "#NoValue#" twice in the NetInfo output suggests some serious inconsistency which would be difficult to fix.
Let us know how you get on, and Good Luck!

Grant execute to newly created user upon user creation

Hi
I have a procedure test in schema of user1.
I have to grant exec on this procedure to the new user upon creation of the new user.
like upon
create user USER1 identified by ....
then USER1 should be able to execute user1.test after that
in short every user created should have grant to execute this procedure.
Please suggest.
Thanks in Advance

Hello, if you have a procedure in the schema of user1 then the user is user1, i.e., you cannot be creating a new user if user1 if user1 owns the test procedure.
To grant execute for a user on a procedure, just run:
GRANT EXECUTE ON user1.TEST TO <new_user>;If you want to allow every user to execute this procedure then run something like:
BEGIN
FOR cur_rec IN (SELECT username FROM ALL_USERS WHERE username NOT IN ('SYS','SYSTEM'))
 LOOP
 EXECUTE IMMEDIATE 'GRANT EXECUTE ON user1.test TO ' || cur_rec.username;
 END LOOP;
END;
/And that will grant execute on the procedure for all users.

Mb5b time_out with newly created user

Dear expert,
I have created new sap id and provided requested authorization however if we run mb5b it gets time_out even for one day but if we run it using any old SAP id it works fine.

take a performance trace in ST05 to see where the transaction spends all the time.
take an authorization trace in ST01 to see if the authorization affects the transaction.
make sure you execute with the very same selection parameters (except for the display variant, which may be user specific), the old user might have some defaults from user parameters which might not be available for the new user, compare the user parameters.
MB5B is in general slow and must not be used for mass data (see 1005901 - MB5B: Performance problems)

Can't log in with newly created user on new install of Arch [solved]

Hi all,
Yesterday I installed Arch anew (because I had a hardware failure that took out my hard drive), but now I'm encountering an issue with logging in.
After following the installation guide, and creating a new user, I find that I'm unable to log in as said user.
It complains about wrong password, but it's the exact same password that I entered mere moments before that, when creating the new user.
I can "log in" as said user by first logging in as root (which does work) and doing "su - <username>" (though then it doesn't ask for a password).
Can someone point me in the right direction to fix this problem?
Last edited by madjo (2013-07-03 20:19:43)

I think cfr meant to say you shouldn't "fix" bash path - as some users did. Unfortunately there's a bit confusion wrt which paths should be used - see this ML thread.
Some say we should keep /bin/foo for compatibility, others say that we should boldly move to /usr/bin/foo.

SQL fails on newly created user

I just downloaded Oracle XE, installed and managed to go through all the steps in the Getting Started manual, i.e. creating a simple application and tried simple SELECT statements on EMPLOYEES and JOBS tables using the user account, "HR". I have tried to create two new user accounts with same settings as "HR". But when I log in as any of these two new users and just try on the SQL window with the same SELECT statements, I would get an ORA-00942 - form or view not exist. What else should I have to do? Do I have to grant certain access rights to the new accounts? I checked also the video tutorial and couldn't see any thing.

When you create a table, it is by default created in user's schema, which is same as username. In fact, if you create table table_name as user hr, you create table hr.table_name. That's not an issue if you try to access this table as the creator. But it is a problem if you want to access this table using different user accounts.
If you log in as e.g. usera, you can use query like this:
SELECT * FROM hr.table_name

Unable to view obiee 11.1.1.5 dashboards for newly created user

Hi ,
Im working in obiee 11.1.1.5.0.I created a new user and tried to view a dashboard which I have created in the weblogic user.But it dispalyed the following error.
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27005] Unresolved column: "PEO_DIM"."ENTERPRISE_DESCRIPTION".Please have your System Administrator look at the log for more details on this error. (HY000)
In my understanding,when a new user is created,even if it is not assigned to any role it will have rights to see all the dashboards.Then what will be the reason for this error?Can anyone provide me a solution?
Eagerly waiting for a reply
Fathima farsatha

This is due to access restrictions in RPD, even though user able to see all dbs user suppose to have access privileges for subject areas.

OS X Server 10.6.4 - newly created user cannot login to server

As title.
Just turn on the mac mini server (mid-2010) and do some initial setup. It can access the internet. However, all users that I have created cannot log into the server! Only the one (admin account) that created during the 1st time server setup can login to the server. Anyone know why and what I have not setup properly?
New user during login take a while and no error message popup. The login window just acts like it can login but within a second, the login window "shaking" and prompt for me to login again. Watch below youtube video for more detail.
http://www.youtube.com/watch?v=K7wV3rVJK9c
Here are some information hope can help...
1. My mac mini server connect behind a router.
2. No special setting for the DNS / Open directory. Just use the system default.
3. When open "Server Admin", it shown "mac.local" at the upper left hand side.
Message was edited by: rayzine2

rayzine2
After the Server Setup Assistant has finished and by default the Service Access Control Lists (SACLs) denies access to everyone apart from the default admin account. It does this when SSH is enabled. It's one of the options at the bottom of the dialog box you used to create the default administrator account. To turn this off launch Server Admin, select the Server name in the sidebar > Access.
You should be configuring client workstations to allow network users to log in to rather than the server. Read the documentation:
http://support.apple.com/manuals/#serversandenterprisesoftware
Tony

Newly created users are not able to log in through WEBGUI in SRM system

Hi All,
I have created new roles in the SRM system with the BP tanscation codes Like( BBPSC01
BBPSC02
BBPSC03
BBPSC04)
after that I have created new users and I have assigned these roles to users. Users are able to login throgh SAP GUI but Users are not able to log in WEB GUI.. Once they providing user id and password in web gui. they are facing issue.
For web login do we need to maintain any special settings in SRM system?
Please suggest me.
Thanks in advance.
Regards,
Siva

Hi,
Here is the error when user is giving user id and pwd.
Note
The following error text was processed in the system DN0 : Error message occurred.
The error occurred on the application server dm2serv_DN0_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPMSYST
Regards,
Siva

EMail Notification for the Newly Created users using UME API

Hi ,
In my application ,the user creation is handled by custom Admin module which uses the UME APIs. Upon creating the user, we need to send a notification mail to the user's email id which he provided in the Add new user form.
Is there any direct APIs available to notify the user via email. I hope the Standard user creatin module in User Administration also uses the same UME APIs.
Please let me know the possibilities.
Appreciate your help.
Sample Code:
 IUserFactory mUserFact = UMFactory.getUserFactory();
 IUserMaint mUserMaint = mUserMaint = mUserFact.newUser(aUser.getLogin());
 IUserAccountFactory mAccountFact =UMFactory.getUserAccountFactory();
 IUserAccount portalAccount = null;
 mUserMaint.setDisplayName(aUser.getLogin());
 mUserMaint.setXXX();
 mUserMaint.save();
 mUserMaint.commit();
 portalAccount = mAccountFact.newUserAccount(aUser.getLogin(), mUserMaint.getUniqueID());
 mAccount.setPassword("XXXXXX");
 aUser.setPassword(mPassword);
 mAccount.save();
 mAccount.commit();
Thanks and Regards,
Sekar

Hi,
I have used the Java Mail API directly send the notification upon new user creation.
Thanks and Regards,
Sekar

How do I access iTunes library in newly-created user accounts???

I have created some new user accounts for my kids. When I log into one of their accounts and open iTunes, there is no music in the library. I'm sure there is a way to access the iTunes music library for my kid's user accounts, but I can't figure it out. Any help is greatly appreciated.

iTunes has no multi-user library so you have to find some other way.
There are two methods to make your music accessible for other users.
I think the safest way is to share your music (library or selected playlists) with your kid's accounts. They can listen to it, but not mess around with your library.
Enable fast user switching:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1787.html
In your account enable sharing your iTunes Library:
http://docs.info.apple.com/article.html?artnum=165212
(It's for iTunes 4.7, but still valid for higher versions)
In your kid's accounts tick the checkbox 'Look for shared music' in Preferences>Sharing in iTunes.
The drawback of the described setup is, that your account has to be activated and iTunes must be running. Some items can't be shared.
The advantage is, that other users can't mess things up.
The other method is by moving your music to a public folder. The advantage is, that all users can access the library at any time.
The greatest disadvange is, that every user can mess things up.
This method is described here:
http://docs.info.apple.com/article.html?artnum=93195
The second paragraph in this article contains the links I gave above.
Hope this helps.
M

Can't Login to Newly Created User Accounts

I have 4 user accounts on my G4 quicksilver running 10.4.11. Recently I tried to create a new account and found that once created (with a password) I can't log in to it - the login window shakes when I enter the password as if it was incorrect. The same holds true even if I don't set a password to a new accoun - it simply will not log in. I've tried repairing disk permissions and the same in Safe mode. I ran my brand new TechTool Pro 5, but that doesn't find any problems. Also repaired the keychain for each of the 4 useable accounts. But whatever I do, I can't create a new account and get it to log in.
Now completely stumped, so any ideas welcome.

The login passwords are in the netinfo database. I am not sure what is going on. You can rebuild the netinfo database but with multiple IDs it gets difficult. You have to recreate the user IDs and the same order as you had them before then you have to adjust where the data is.
another approach... You could try changing the password from the command line.
you need to be log on from an administrator account.
Macintosh-HD -> Applications -> Utilities -> Terminal
# To find out the users on the system type, use the list command. The l is a lower case L:
ls /Users
# Pick one of the users which I'll call a-user-name and type it in this command:
sudo passwd a-user-name
Enter your administrator account password. It will not appear. Press enter when done.
# and enter the new user password. You need six characters.
# You will need to enter your password twice. Your typing will not show up on the screen just
# press enter when you complete the typing.
# For cryptic information on these commands try:
man ls
man passwd

Newly created user packages with no admin rights

Hi all,
Have already opened a ticket with Novell on this one as i've never seen it before...
Have upgraded a site to ZFD7 SP1 IR2 using the iso's from the Novell site, so it's a full upgrade install, everything went perfectly on the server, consoleone snapins upgraded fine and all
however, if I try and create a user package with consoleone from the server, it hangs and never completes and I end up with packages with no rights for any users, so i'm unable to edit, delete or do anything with them
also tried using a workstation with IR4 snapins which gives the same result, using a spare consoleone with earlier zfd7 snapins I can create packages with no issues
Anyone run into this before and will we be able to get rid of these objects from the tree?
And are the IR4 snapins not compatable with IR2?

gleach1,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Authorization newly created user

Similar Messages

Maybe you are looking for