Authorization objects for Process chain and Data sources in BW 3.x version
Hi,
Can any one tell me the authorization objects regaring process chain and Data source in BW 3.x versions. I guess we have auth objects for both of them in BW 3.5 that is S_RS_PC AND S_RS_DS .
Can any one help me solving this issue
Thanks
Bharat
its the same thread again
/community [original link is broken]
Thanks,
Raj
Similar Messages
-
Authorization objects for Process chain and Data source in BW 3.x
Hi,
Can any one tell me the authorization objects regaring process chain and Data source in BW 3.x versions. I guess we have auth objects for both of them in BW 3.5 that is S_RS_PC AND S_RS_DS .
Can any one help me solving this issue
Thanks
BharatHi bharat
I dont thin these objects are part of 3.0
check from SU03 weather these objects are present in 3.o box
In 7.0 they exist:
http://help.sap.com/saphelp_bw33/helpdata/en/8b/134c3b5710486be10000000a11402f/frameset.htm
TO see weather these objects exist:
Go to Tools -> Administration ->User maintenance ->Information System -> Authorization objects -> Authorization objects by Complex Selection Criteria -> By Object Class. For the object class, enter either RS (for Business Information Warehouse objects)
OR
S_BCE_68001413 (Tcode for this rep)
Thanks,
Raj -
Authorization object for "set TECO" and "undo TECO"
We want to control the authorization for "set TECO" and "undo TECO",but we can't find relevant Authorization object. Is there any Authorization object for these two functions? If there's no Authorization object for them ,then how can we achieve the same result? Thank you very much!
Hi,
Under one user ID the auth object B_USERSTAT will have the authorization key in which user will be responsible to change the TECO user status.
One user will not have any authorization key under B_USERSTAT Auth_Object.
Hope it's will give you help.
Regards,
Vishal Kr. Sharma -
Authorization Objects for GL, AP, and PCA
Hi,
What is the difference in:
1. Authorization Objects
2. Facility Objects
3. Profit Center Objects
Where can I find the above objects related to:
1. GL
2. AP
3. PCA (Profit Center Accounting)
Please give me the answer, I will assign points to you.
Thanks in advance.Hi,
1) Make the characterstics like Company code, Controlling Area, Proficenter ..etc as authorization relevent (RSA1)
2) Create the Respective Authorization objects for each of the above Characterstics (RSSM).
3) And assign the Cubes and ODS es to the Authorization Object RSSM
4) Create and use the Authorization variables on the above characterstics in reports
5) maitain the access for all users through the roles by including and maintaining the AOs (created in step 2)
With rgds,
Anil Kumar Sharma .P -
Which Process Chain or DATA Source uses Queue MCEX02
Hi plz tell me which pc or data source uses Queue name - MCEX02,MCEX04,MCEX05,MCEX05_1,MCEX08,MCEX11,MCEX12,MCEX13,
Actually these queues entries are blocked in ECC Environment.
Also provide any document on running jobs thorough LBWE.
Thanks
NileshHi,
MCEX02,MCEX04,MCEX05,MCEX05_1,MCEX08,MCEX11,MCEX12,MCEX13 these are the extract structure names of the datasource for the applicaitons Sales, Billing, Delivery, Purchasing....etc.
If you goto LBWE based on the application component number you can find the datasouurces like 11, 12, 13 are for sales, delivery, billing repectively.
Check the below link for LO extraction process steps.
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
Hope this helps.
Veerendra. -
Authorization object for company code and profit center together
Hi all,
Please help me with the following requirement..
Company Code = ABCD
Profit Center = *
The user is authorized to run the report for company code ABCD only but any profit center within this company code.
2 Company Code = *
Profit Center = WXYZ
The user is authorized to run the report for Profit Center WXYZ only but any company code.
3 Company Code = *
Profit Center = *
The user is authorized to run the report for any company code and profit center.
The same user could have 1 and 2. So, in this case he should be able to run a report for the total inventory of company code ABCD, and a report for total inventory of profit center WXYZ only regardless company code.
He should not have visibility to other company codes inventory other then profit center WXYZ.
Regards,
RajHi ,
Anyone please help me..
Regards,
Raj -
Authorization for Process Chains in BW 3.5 (2004)
Hi all,
I wanted to know if there is any way to limit actions on process chains. I would like to give some users display only access to process chains. Is that possible?
ThanksHi,
In your system go to
'Transport Connection' tool-->
Click on 'Object Changeability' pushbutton-->
And for Object types RSPC and ISIP make "changeable/Not Changable" .
Note: This will work only if your system is lockect aganist the changes as it is normally in Production.
Also check the below links:
1) Authorisation for process chains
2) Authorization Object for Process Chain
3)http://help.sap.com/saphelp_nw2004s/helpdata/en/35/c7e442e3c15704e10000000a155106/frameset.htm
4) http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/frameset.htm -
Authorization objects for transaction, one to view, and one to maintain
Hi all,
My requrement is to create two authorization objects for transaction, one to view, and one to maintain.
I know how to create objetcs vai sm21, but i donot know how to crate objects with activity codes.
Please suggest how to create object where i can asign activity codes.
regards
manishThe Authorization Concept
R/3 uses authorization objects to assign authorizations to users. An authorization object is a template for an authorization. For example, authorization object F_SKA1_BUK - G/L Account: Authorization for company codes requires the specification of two field values: Company Code and Activity. To allow a General Ledger supervisor to create a general ledger master record, he/she must be assigned an authorization to create (Activity 1) accounts for a specific company code (eg. Company Code 2000). Such an authorization is created using the object F_SKA1_BUK by assigning these field values and naming the authorization following an appropriate convention (eg. Z_SCC20001).
Authorizations may be classified as general authorizations, organizational authorizations or functional authorizations. General authorizations specify the functions a user may perform. Authorization object F_SKA1_BUK has been assigned to the function for creating general ledger master records. The system checks for the useru2019s authorization to create general ledger accounts (Activity 1) in at least one company code. The system then checks whether the user is permitted to create accounts for the specified organizational unit (company code) and has the required functional authorizations. Authorizations in this case may restrict the user to certain Charts of Accounts. In addition, an authorization group may be defined in certain authorization objects to protect individual master records.
Profiles relating to an organizational role (eg. General Ledger Supervisor) are defined consisting of a list of authorizations and other profiles. Such profiles are then assigned to users with that role and stored in their user master record along with other data (eg. password).
Do check this link as well.
http://articles.techrepublic.com.com/5100-10878_11-5110893.html -
How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use
Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward -
And i enhanced these objects into process chains also
Hi All,
as per my requirement i created infopackage and dtp in development system. and i enhanced these objects into process chains also. now i want to send this infopackage ,dtp and enhanced process chains(at the process chain level i want to add only this infopackage and dtp).i dont want to collect total chain.please guide me.
Regards,
chandra.Hi,
The Process Chain definition will be collected with the Infopackage & DTP automatically when you make the change (It will prompt for a Transport Request).
But the other Process Variants which is used in the Process Chain will not come, but if you need them then u need to collect it using Transport Connection.
PS. Make sure the Start Variant is set to "Start using Meta-Chain" so that the chain is not scheduled automatically after Transport.
Regards,
Chathia. -
I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
1. The C2WTS Windows service and C2WTS SharePoint service are both running.
2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Creation of a generic extractor and data source for the FAGLFLEXA table
Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, VishalHi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu -
How to find unassigned master data text objects in process chain in bi
Hi
Please let me know how to find the unassigned master data text objects in process chain.hi,
actually if u want to find that , is ur Unassigned Infoobject in present in process chain or not, , that u can find out just by right
click on your DTP (master data Txt datasource--> Master data text ), if this is present in Process chain, then on ryt click, the process chain option will be active. by clicking over that u can find the name in which this exists.
thanks. -
BI admin cockpit for process chains
Hi
Currently we are monitoring process chains(Daily data loads) on a daily basis ,Business users want the statstics of the process chains to be implemented in cockpits via BI admin cockpit( BI 7 version) .can some one tell how to implement BI admin cockpit for process chains.
If some one has some specific documents can you please mail then to my email: [email protected]
Thanks
BhavanaHi,
You need to install Business Content
Front End and OLAP Statistics (Aggregated) ( 0TCT_C01, 0TCT_VC01)
0TCT_C01
InfoCube 0TCT_C01 is a standard InfoCube that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
0TCT_VC01
InfoCube 0TCT_VC01 is a Virtual Provider that contains front end and query runtime statistics (aggregated).
This InfoCube is used for monitors that display all the aggregated values of front end and query runtime for BI applications, BI application objects, and InfoProviders on the portal.
Front End and OLAP Statistics (Details) (0TCT_C02, 0TCT_VC02)
0TCT_C02
InfoCube 0TCT_C02 is a standard InfoCube that contains detail values for front end and query runtime statistics.
This InfoCube is used for monitors that display detail values for the query runtime object.
0TCT_VC02
InfoCube 0TCT_VC02 is a Virtual Provider that contains front end and query runtime statistics (details).
Data Manager Statistics (Details) (0TCT_C03, 0TCT_VC03)
0TCT_C03
InfoCube 0TCT_C03 is a standard InfoCube that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
0TCT_VC03
InfoCube 0TCT_VC03 is a Virtual Provider that contains data manager statistics (details).
This InfoCube is used for monitors that display all the detail values of data manager statistics for the query runtime object on the portal.
DTP Statistics (0TCT_C22, 0TCT_VC22)
0TCT_C22
The InfoCube 0TCT_C22 is a Standard InfoCube that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
0TCT_VC22
The InfoCube 0TCT_VC22 is a Virtual Provider that contains statistics for data transfer processes that are executed individually or in process chains.
This InfoCube is used for all the monitors that display the DTP statistics on the portal.
InfoPackage Statistics (0TCT_C23, 0TCT_VC23)
0TCT_VC23
The InfoCube 0TCT_VC23 is a Virtual Provider that contains InfoPackage statistics or detailed information about the InfoPackage that are executed individually or in process chains.
0TCT_C23
The InfoCube 0TCT_C23 is a Standard InfoCube that contains InfoPackage statistics or detailed information about InfoPackages that are executed individually or within a process chain.
Process Statistics (0TCT_VC21, 0TCT_C21)
0TCT_VC21
The InfoCube 0TCT_VC21 is a Virtual Provider that contains process chain statistics or detailed information about process chains and process types that are successfully executed.
This InfoCube is used for all the monitors that display detailed information about process chain statistics and process statistics on the portal.
0TCT_C21
The InfoCube 0TCT_C21 is a Standard InfoCube that contains process statistics or details of processes that are executed individually or in process chains.
This InfoCube is used for monitors that display all the process runtimes on the portal.
Process Status (0TCT_VC12)
The InfoCube 0TCT_VC12 is a Virtual Provider that specifies the status of the process chain and detailed information about the process status.
BI Object Request Status (0TCT_VC11)
The InfoCube 0TCT_VC11 is a Virtual Provider that provides detailed information about requests in all the Data Targets and Master Data in characteristics.
Content Master Data
The process chain 0TCT_MD_C_FULL_P01 is used to load the content master data.
(e.g: Process Chain, Process Status, Web template, Process variant, Web item)
System Master Data
The process chain 0TCT_MD_S_FULL_P01 is used to load system master data.
e.g:BW Object type
Data Load Statistics Delta
The process chain 0TCT_C2_DELTA_P01 is used to load delta data for data load statistics.
The following processes are included in the process chain:
Process Target
0TCT_DS22_DELTA_DATAMART (B71) DTP Statistics [0TCT_C22]
0TCT_DS23_DELTA_DATAMART (B71) Info Package Statistics [0TCT_C23]
0TCT_DS21_DELTA_DATAMART (B71) Process Statistics [0TCT_C21]
Query Runtime Statistics Delta
The process chain 0TCT_C0_DELTA_P01 is used to load delta data for query runtime statistics.
The following processes are included in the process chain:
Process Target
0TCT_DS01_DELTA_DATAMART Front end and OLAP statistics (aggregated) [ 0TCT_C01]
0TCT_DS02_DELTA_DATAMART Front end and OLAP statistics (details) [0TCT_C02]
0TCT_DS03_DELTA_DATAMART Data manager statistics (details) [0TCT_C03] -
Authorization Object for using Object Services
Can you tell me how to limit a users authorization to create or delete attachements using the object services functionality? We'd like to control the addition and deletion of the attachments. Is there a specific authorization object for this functionality?
Thank you, JulieHi julie;
I hope that following are the solution for you problem. Check wheather this is helpful to you or not.
Authorization Object C_DRAW_BGR (Authorization Group)
The following table shows authorization object C_DRAW_BGR. This authorization object allows you to limit access to individual documents.
Fields Possible Values Description
BEGRU (Authorization group) 0000 - ZZZZ Used to restrict the authorizations for document maintenance further.
Authorization object C_DRAW_BGR can be used to restrict access to individual documents. It works like a simple on/off switch. If the check of object C_DRAW_BGR is fine, the user's authorization can be further restricted by checking C_DRAW_TCD (check only based on the document type) or C_DRAW_TCS (check of the
combination of document type and status). At the fifth level there is a BADI called DOCUMENT_AUTH01, which you can use to design your own authority check.
Authorization Object C_DRAW_DOK (Document Access)
The following table shows authorization object C_DRAW_DOK. This authorization object controls which original data of a specific document type there are access authorizations for.
Fields Possible Values Description
ACTVT (Activity) 52 53 54 55 56 57 Change application start Display application start Display archive application Change archive application Display archive Store archive
DOKAR (Document type) Here you enter the document type that access to original data is allowed for.
Authorization Object C_DRAD_OBJ (Object Link)
The following table shows authorization object C_DRAD_OBJ. This object controls which users can process which document info records, based on a combination of activity, object, and status.
Fields Possible Values Description
ACTVT (Activity) 01 02 03 06 Create Change Display Delete
DOKOB (Object) You must enter the data base table for the objects here (for example, MARA for material record).
STATUS (Document status)
if useful rewards points.
Regards,
nitin
Edited by: nitin bhagat on Feb 18, 2008 6:23 AM
Maybe you are looking for
-
Document Cloud PDF services
-
[Weird Error!!] Insufficent space in working directory when create db clone
Hi guys, I met a problem when creating Oracle database clone by EM 10.2.0.3 TC9 Target Oracle Database is 10.2.0.2 version and on RH Linux Enterprise Server 3.0 I selected right host to clone, and gave username/password, and working directory. When p
-
Eye Dropper error with Photoshop CC 2014
On my work computer I am experiencing a "Program Error" when trying to use the eye dropper to sample a colour. My home computer has no problem. I un-installed and re-installed the program with no positive result. Bob
-
6000 songs out of 7800 disappeared
I'm using Itunes on my MacBook. When I'm in "Match" View it tells me that my Itunes Library is available on Icloud (7807) Songs. When I switch to "Songs" View it show me only 1.126 items 1.100 of them are in "waiting" Icloud Status, no Icloud Downloa
-
CPU 100% when execute forms
Hello, i am running iAS1021, HTTP Server only, with RDBMS 8.1.6.2 on a PC pentium II 400mhz with 256 MB ram. Does anybody know how the cpu of my pc goes to 100% for 6-7 minutes in order to run a form? is it normal or do i have to change some paramete