Authorization of MRP View

Dear Experts,
I want to give authorization department wise like sales people will enter only sales view at the time of material creation like wise for QM also.
I have tried through PFCG & from OMT3E, OMT3U also but user is able to create all data.
Pl. guide how to do?
Thanks
Trupti

Dear,
M_MATE_STA Maintenance status authorization for material master records
The data contained in a material master record is divided into user departments or views (Purchasing, MRP, and so on).
User department        Maintenance status
Work scheduling          A
Accounting                  B
Classification               C
MRP                             D
Purchasing                  E
Production resources/tools F
Costing                        G
Basic data                   K
Storage                       L
Forecasting                 P
Quality management Q
Warehouse management S
Sales                          V
Plant stocks                 X
Storage location stocks Z
And authorization object M_MATE_MAN ("Material master: Central data").
Please refer this very useful link,
http://help.sap.com/saphelp_40b/helpdata/pt/f3/69ec6eb435d1118b3f0060b03ca329/content.htm
Regards,
R.Brahmankar

Similar Messages

Material Master MRP View not be created till Basiv View is created

Hello All,
I need an information where i would like to know if an MRP view in a Material master can be restricted without the creation of the Basic View. Basically an MRP view is getting created even though the Basic View of material master is not there and it needs to be stopped.
Thanks for your inputs.
Ismail

Dear Syed ,
If you want to prevent end users update other material master views , you can apply the concept of SAP note 545380 - FAQ: Authorizations material master , with this you will not more problem with this kind of problem.
Hope this can help you.
Please let me know if my thinking about your question is correct.
best regards,
Carlos Moçatto

Authorization issue to view cube contents

Hi Gurus,
I am getting Authorization issue to view cube contents in Production server, When I execute the cube it is showing me the following statement.
"You do not have sufficient authorization for the infoprovider ZMMG_C05".
Please provide me a possible solution for this.
Thanks,
Jackie.

Hi,
Two things to be checked with respect to authorization for this one.
1) Functional Roles: Check whether Info cube is present in the functional roles that are assigned to you.
                              If not you need to get the functional role in which the Infocube is assigned.
2) Data Access Roles: Check in the data access roles assigned to you, whether you have the access
                                  to the selection that you are using to see the data in the info cube. Else, request
                                  BASIS team to assign the appropriate data access roles to you.
Hope this helps.
Regards,
Bharat

MRP view in material master creation

Hi Guys,
Can anyone tell me how to change the settings for field dependency. My requirement is to use only the filed for "reorder point" in MRP view and do not enter any other data like MRP type or lot sizing etc.
I have tried changing the setting for field selection group for MRP type etc but whenever i enter the value in Reorder point field it asks me for MRP type and does not allow me proceed...
Thank you for your help.
Regards,
Siddharth

Hi
You cannot change that dependency as it is done through program code and not thru config.
If you want reorder point only as an info field and not for actual Reorder point planning, I suggest you to explore any other unused information field in the masterial master.
You can also use classification
Best regards
Ramki

Special Procurement MRP View VS. Costing View

Hi Experts,
What's the difference between the 2 Special Procurement Key in the MRP veiw and the Costing View? Should they always be the same?
Thanks,
Kumar

Hi,
MRP:
You use special procurement when you want to be able to override the procurement type in the material master or define the procurement type more precisely.
If the procurement type is in-house, you can nevertheless force the system to ignore the BOM and routing, and process the material as if it were externally procured, by specifying the special procurement as external.
Costing:
If you enter a special procurement type in the Costing view of the material master record, it will be used in costing.
If you do not enter a special procurement type in the costing view of the material master record, the system will use the special procurement type in the MRP view.
For further Clarification revert.
Regards,
S.Babu

MRP views in MM02

I need to create a Screen Variant and apply to a Z transaction which only allows users access to change MRP Information u2013 MRP1, MRP2, MRP3 and MRP4 tabs. in the Material Master.
I do not want to give everyone access to MM02 u2013 Change Material Master as this allows them to change all master data within the Material.
I only want them to be able to change MRP1, MRP2, MRP3 and MRP4 tabs.
How to make the screen variant for this. I haven't worked on screen variants..Just need details on that. Please help.
Edited by: yorker on Jun 27, 2011 9:08 AM

Hi,
No need of creating any Trasnaction/Screen Variant
Go to OMT3B - Copy New Screen Seq from 21 and under "Data screens" delete all except MRP.
Now Go to OMT3E - Here under "User screen reference", assign a Key to all user whom you want to give change option for MRP views. Now In Screen Seq Control Screen, maintain an entry with SRef; Trans as MM02, SRef: User as that Key, SRef: mat Type as *, SRef: Industry as * and assign the new Screen Seq.
Now Check in MM02.

MRP view maintenance

Hi All,
I have developed a programme to uplaod MRP views for huge number of materials across Plants.
There are few material for which one strange thing is observed
1. Material A plant 1-MSTA -D not mantained, but the same is there in MM01
2..MaterialA plant 2-MSTA-D maintained and its maintained in MM01.
Is MRP maintained on the basis of Plant or Storage location or both...because my programme is looking at material plant combination level and uploading the MRP as per maintenance status maintained in table MSTA.
But in above case, it gave an error probably because for one storage location MRP was maintained and for other not...
Can you all throw some light on this....
Regards,
Satyendra

One thing i missed...there are few plants for which above things are appearing for all the materials...
i.e MRP view maintained in MM03 but for the same materials MSTA doesnt have D status for those plants..
Regards,
Shailesh

MRP view maintenance for Material Master

What is the basic entry for R3 material master, if, I want EBP below condition works:
Stock in R/3 sufficient: Shopping Carts creates MatReservation.
Stock in R/3 not sufficient: Shopping Cart still creates MatReservation, and when run MRP (in R/3), it gives Purchase Requisition, with the exact shortage qty.
Info: We have set customizing in EBP so that every follow-on document for Shopping Cart will be Reservation.
-Mimi-

In R/3 , the material should have MRP view and all planning related settings ...
wr u want to go for consumption based planning or deterministic planning .
Based on the planning procedure setting in MRP views of the R/3 sytem , PRs will get generated.
This is what u are looking for .. otherwise post your feedback...
Regards
Mani

New lot size in MRP view

Hi ALL
Any one can suggest how can we configure a new lot size for MRP view in ECC.
regards
Vikas

Hello Vikas,
I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
Thanks
Amber

How to delete MRP view data after create in Material master data ?

Hi all ,
After user create a useless MRP view data in Material master data , how to remove it ?

Hi
Material master once created cannot be deleted.Only thing u can do is to mark it for deletion
Go to Logistics > Materials management > Material master > Material > Flag for deletion > Immediately.
Give the necessary data that is needed for the view you want to delete.
Press and flag the view you want to delete.
Now the view is flagged for deletion. This means that it's use is limited and it will be cleaned up or really deleted at the next clean up of the system.
regards
Anand

How to create MRP view using BO BUS1001006 & Method CreateViews.

Guys,
I need to create MRP view using BO BUS1001006 & Method CreateViews.
i am not able to unterstand, what i need to specify to create MRP view, other than material number.
what field i need to send for MRP view.
Regards.
santosh.
Edited by: santosh koraddi on Jun 23, 2010 6:14 PM

Hi,
I have a similar question, have done a search and I see this sort of thing has come up a few times but with no definitive answer.... this thread seems close but don't really understand the solution (I'm not an ABAPER)
I have a material master creation workflow under construction, it uses BUS1001006 and method createviews.
The issues is that I want to restrict creation of certain views to certain agents, I have a fork in my workflow and its meant to split up the various views for various agents.
The problem is that if an agent in one of the forks completes their views the workflow tries to get them to completes teh other views which they do not have authoisation to do... anyway the end result is that the workflow thinks all teh views have been created and the workflow items dissappear from the others inboxes.
How do I setup my workflow such that each agent in each fork only has to complete the views they have authorisation to maintain and leaves work items in the inboxes of other agents for them to complete?

MRP view in MM60 list

Dear pandits,
I am doing material plant extn. thro lsmw from plant x to plant y.
Could I fetch following MRP views aprat from MRP type (appearing already .)
reorder point, MINBE
mrp controller, DISPO
lot size , DISLS
maximum stock level MABST
thanks
v balajee

Hi ,
I think u will not all these fields in MM60 report.
All these fields u will get in MARC TABLE,go to se16.give MARC table.In the initial screen,go to settings list format- chosse fields-select all the fileds which u want and enter.
Then in the initial screen,give plant X and execute.
U can download all these details to excel sheet and can be used for lsmw.

Seasons in MRP view

Hi,
My customer wants to view MRP in seasons wise. Is that possible in MRP screen?
Please let me know if any method available in MRP..
Thanks,
Rohith

Hello Vikas,
I am not too sure ? Can you not change the field ? It doesnot need any cofiguration on the MRP view level. The value needs to be set
Thanks
Amber

Materail Master - MRP view 4

Dear experts,
pls explain MRP view 4 - Follow-up matl field?
what use? how to use?
Regards,
Sankaran

Hi,
A particular material X to be discontinued. Instead of that you want to use some other material Y. For that reason this field will use.
In MRP 4 view of material X , make discontinued indicator tick. Give effective date.
Give the follow up material no.Y.
Result: From effective date, material X will be replaced by material Y.
Reward if useful.
Regards,
Dharma

Finding if mrp view exists

hi
i am working on an enhancement within cif to transfer material master in ecc to scm .
i need to check if mrp view exists or no for every material transferred.
now how do i do this coding wise ? which field or table do i need to check if mrp view has been defined or no.

Hi,
Use FM 'SELECTION_VIEWS_FIND'
Check below thread
Select a specific view in MM02/MM01
https://forums.sdn.sap.com/click.jspa?searchID=6788689&messageID=4407517
Regards,
Atish
Message was edited by:
Atish Sarda

Authorization of MRP View

Similar Messages

Maybe you are looking for