Authorization on Storage Section

Hi Experts,
Recently I faced a big problem in WM when I have created a role which contains create transfer order transaction (LT04), the problem is there's no storage section in the authorization organizational structure, there's only warehouse number and storage type.
How I can create authorization on storage section in each storage type for each user?
Thanks

Hi Tamer,
You are right at the time of TO creation, System does a validation check on Storge type and Storage bin and Storage section data gets populated automatically hence based on my knowledge i don't think Standard SAP is having the authorization object for Storage section
Please get in touch with your BASIS team might be they will be able to help you by setting something in the role

Similar Messages

I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)

I deleted my music through the "manage storage" section in the options to make room for the ios update awhile back. Now I can't get any music back onto my device through itunes. (I've tried restoring the device twice to no avail)

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

WM: Error occurred during storage section search (FGWM05 001)

HI friends
              i done GRN 101(movement type) with mb31 for production order ..based on TR Iam trying to create transfer order i have
the below error. where i missed the configuration
"Error occurred during storage section search (FGWM05 001)"
    Message no. L3 041
Diagnosis
    No storage area search has been defined for this material and this
    storage type.
Procedure
    Contact your system administrator! Note down the material and the
    storage type listed within parentheses in the error message.
with regards
dinesh
Edited by: code acess on Jun 28, 2011 8:30 AM

Hi
In WM customizing Please check for your warehouse/Storage type combnation the storage section search is on and valid.
IMG>Logistics Execution>WM>Strategies>Storage section search
if there is no entry then maintain it. The nest error may be storage bin. Make sure that you create storage bin for whsno/storage type/storage section combination by using LS10 or LS01N)
Hope it helps
Karthik

Storage Section Settings

Hi Gurus
I put in the customizing of storage type Addition to stock "M" and in the material master I mark the flag for addition to stock this does not work as spected, when I receive a PO with 2 materials on it, they go to 902, then I try to process the posting change notice but I get error no destination storage bin could be found in storage type XXX
These 2 materials have the same storage section, and I have correctly defined a strategy to place accordingly this storage section,
The current putaway is L next empty bin, and if I change to "I" addn to stock then system allows the putaway but just for one materials automatically, with the second one I still get the error but If I manually type the bin of the storage section then It allows putaway too.
Can you explain what needs to be done to allow putaway of stock in a storage type wich is divided into 3 storage sections, 2 of them are assigned to two bins each (2X2=4bins), and the last storage section is linked only to one bin. (Total of 5 bins)
The rare thing here is that in the first 2 storage section that have 2 bins each, I can put material on it only one palled on each bin, if for some reason only half pallet is placed, then no more stock can be placed there, How to check this capacities?
And for last the strategy is that system tries to putaway first in storage section 1, if no empty bin then try in sto section 2, and if no empty bin there, then it should go to storage section 3 (wich has only one bin attached) but I want to make this bin like infinite capacity so if there is no room in the first two storage sections (4 bins) then it will go to the las storage section wich can allow addition to stock and mix storage.
Please your inputs will be really appreciated on what atrategy and capacity cetting need to be done on customizing and material master of material to achieve this.
Regards

Julio,
Better late than never...Here are the other capacity check methods:
Check 2:
=======
o SUT check must be active - if not, then config for SUT assignments to ST will not be used
o For the material no specific capacity data needs to be entered
o For the bin no specific capacity data needs to be entered
o Example:
             u2022     Material:          1234
             u2022     Liters per CAS:     4.800
             u2022     ST/Bin:          112/112-01-01
             u2022     Max Bin Weight:     1,500Kg
             u2022     Total Capacity:     3,000
             u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3Kg)
             u2022     Transaction SUT:     T1
             u2022     Allowed SUT for ST:     C1
o The system stops the transaction for the transaction SUT is not valid according the SUT allowed per Storage Type configuration. Message: Storage Unit Type is not allowed for ST112.
Check 3:
========
o The material must be created for the specific ST (WM2 masterdata view) and the maximum bin qty needs to be speicfied.
o For the bin no specific capacity data needs to be entered
o Example:
            u2022     Material:          3344
            u2022     Liters per CAS:     4.800
            u2022     ST/Bin:          113/113-01-01
            u2022     Max Bin Weight:     1,500Kg
            u2022     Max Bin Qty:                           750L
            u2022     Total Capacity:     0
            u2022     Stock to be placed (Weight):     768L = 2,304.000Kg (1L = 3.000Kg)
o The following checks were done:
            u2022     Bin Quantity Check
            u2022     The maximum bin qty was set to 750L (Base UoM)
            u2022     The quantity of the product to be placed was 768L ( = 2,304.000Kg). This qty is more than the maximum bin quantity which is 750L (Base UoM), so according to the quantity the product may not be placed in the bin. Message: Maximum qty for storage bin 113-01-01 will be exceeded by 3.750CAS.
o Note from the above that the error message is expressed on the putaway quantity and not the capacity quantity.
o Note: No weight and volume checks are done (see the weight of transaction > bin maximum weight)
Check 5:
========
o Additional config: SPRO  Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Unit Types - Specify the capacity for the SUT
o For the material no specific capacity data needs to be entered
o For the bin the Total Capacity field must be filled
o Example:
            u2022     Material:          5678
            u2022     Liters per CAS:     4.800
            u2022      ST/Bin:          114/114-01-01
            u2022     Max Bin Weight:     1,500Kg
            u2022     Total Bin Capacity:     3.000
            u2022     Total SUT Capacity:     5.000
            u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3.000Kg)
o The following checks were done:
            u2022     Capacity Check according to SUT Capacity:
            u2022     The capacity of the SUT used is 5.000
            u2022     The capacity limit for the bin is 3.000
            u2022     The error message is displayed stating that the placement capacity is more than the allowed (maximum) capacity:
5.000- 3.000 = 2.000 (Message: Storage Unit Type C1 exceeds remaining capacity by 2.000)
o Note that no check according weight was done. The transaction weight was 2,721.600kg vs the maximum bin weight of 1,500.000kg
o Note from the above that the error message is expressed on the putaway quantity (SUT capacity used) and not the capacity quantity.
Check 6:
========
o Additional config: SPRO  Logistics Execution  Warehouse Management  Master Data  Material  Define Storage Unit Types - Specify the capacity for the SUT
o For the material enter a capacity value (WM1 view)
o For the bin enter a capacity value
o Example:
             u2022     Material:          1007
             u2022     Liters per CAS:     4.800
             u2022     ST/Bin:          115/115-01-01
             u2022     Max Bin Weight:     1,500Kg
             u2022     Material Capacity per BUoM:     1.000
             u2022     Total Bin Capacity:     800.000
             u2022     Total SUT Capacity:     5.000
             u2022     Stock to be placed (Capacity):     907.200L + 5.000 = 912.200
             u2022     Stock to be placed (Weight):     907.200L = 2,721.600Kg (1L = 3.000Kg)
The following checks were done:
             u2022     Capacity Check according to SUT Capacity:
             u2022     The capacity of the SUT used is 5.000
             u2022     The capacity limit for the bin is 800.000
             u2022     The error message is displayed stating that the placement capacity is more than the allowed (maximum) capacity: 912.200 - 800.000 = 112.2000 (112.200 / 4.800 = 23.375CAS). Message: Maximum qty for storage bin 115-01-01 will be exceeded by 23.375CAS.
o Note that no check according weight was done. The transaction weight was 2,721.600kg vs the maximum bin weight of 1,500.000kg.
o Note from the above that the error message is expressed on the putaway quantity (SUT capacity used) and not the capacity quantity.
======================================================================================================
There you go (I hope I've got all the detail down).
Cheers,
Hein
Edited by: Hein Botha on Mar 23, 2011 11:18 PM

Putaway in storage section PA1 is not allowed

Hello,
While creating TO against TR in LT04 system is giving error message as above said in subject line.
I have checked in LX20 and LS04 bins are there even though still getting same error.
Please let me know what could be the reasion and solution for this issue.
Thanks in advance.

you get this error if the storage section check is made active in customizing transaction OMLZ
here you first define one or more storage section indicators (also named storage area indicator).
then you define a storage section search per combination of warehouse and storage type and storage section indicators and assign the possible storage section for this combination.
in the storage bins (LS01N) you enter the storage section to which this bin belongs.
in the material master you enter the storage section indicator
if a bin is determined which has a storage section that is not among the listed storage sections from the storage section search then the error you have is issued.

Putaway in storage section 100 is not allowed

hi,
I am facing a problem
while creatin a TO i am getting an error Putaway in storage section 100 is not allowed
All the strategy for the patricular storage type and the storage section is maintained in the config.
Thanks in Advance
Sunil

your target storage bin has a storage section 100 assigned.
your material master has a storage section indicator.
In OMLZ (storage section search) find the record for your warehouse and storage type having the storage section indicator from your material master, and check into what storage sections (below 1..., 2...., 3,,,) you can putaway the stock.

Storage section sap wm

We have 2 storage section for 1 storage type they are high frequency & low frequency. We are facing issues where most of the bin in high frequency is being taken by 1 material. for example 1 material has occupied 8 -10 pallets. We want to have only 1 or 2 pallets of that material in high frequency storage section so we can have space for other high frequency mateirals. We want to use control qty i.e. if order qty is more than 600 then pick from low frequency storage setion.
How Do I achieve this changes.

Hi Kiran,
you have to distinguish between putaway and picking.
Here in this example,. "A" may high, "C" may be low freq. used material.
For putaway:
If all "A" bins are empty and you store lots of same material with "A", all "A" bins are used until they are 100% occupied by WM.
To avoid this, you may use fixed bins for each material in a "A" bin region. As an alternative (if you cannot use fixed bins) you may code own putaway strategy where the quantity of a material is checked before a "A" section bin is used.
For picking:
If you want to pick large qty from "C" and small qty from "A" you may setup removal strategy "large/small qty" but then you need two storage types which also reverts settings for putaway.
Best regars,
Matthias

Override the storage section check for manual entries

Hi All,
I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
I have checked in help.sap.com .I following information .
To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
*You can also make an entry in customizing that permits you to override the section check for manual entries.*_
Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
Thanks & regards,
Srikanth

HI,
Thanks for your reply.
I want Error message.
Regards,
Srikanth P

Storage section not allowed

I was trying to create a TO with LT01 and mvt type 999.
Its giving an error - 'Putaway in storage section 'A' is not allowed.
It is not allowing to delete these storage sections. I have only 2 storage sections for this storage type.
1.Why this error is coming?
2.What controls this?
Please explain.

SPRO>Logistics Execution>Warehouse Management>Strategies>Putaway Strategy>Define Strategy for XXXXXBins>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....
If you also go through the below, check there as well...
SPRO>Logistics Execution>Warehouse Management>Define Storage Types>Click on any of the entries(the bins and data u r working on) and click on the glass symbl...then you will the indicator for Addn Stock....

Transaction code to check warehouse stock with storage section combination

Hello Gentalemen,
Is there any transaction code to check the warehouse stock with combination of storage section in Warehouse Management?
Please let me know.
Thanks

You can use LX02 or LX03. In the tool bar click the third button which will give you the dynamic inputs from LDB(click the storage bin drop down and click on storage section). You can provide the storage section there.
Kesav

New Storage Section set up in WM

I had to set up some new bins in a new storage section, within an existing storage type in our warehouse. I thought I had configured everything, but when we attempt to transfer batches from the old bin that is being retired to the new one, we get an error message stating: Putaway in Storage Section XX is not allowed.
I did configure it in the storage section search, and am wondering what else I missed. I couldn't find any other strategy configuration that listed specific storage sections. What am I missing?

Jurgen,
thanks, I really owe you, this was the second question of mine you've answered this week. My error was that I had linked the new section to the section that the inventory is currently in. I had to link it to the one indecated on Material Master, and it worked fine. You rock!!!

Create authorization for storage Loction for tcode ME21N

Hi All,
     My requirement is to create authorization for storage Loction for tcode ME21N and ME51N.
     There are standard authorizations for Plant, Document type Group and Org for ME21N
     M_BANF_WRK, BSA,EKG, and EKO which i checked in TCODE SU24.
    But there is no std authorization check for storage location.
    If this is possible then please help me with the procedure and steps.
    Please guide me with all the steps that i need to take care abt..
   Thanks in Advance.
Regards
Sujeer

Hi
This is the authorization objects for PO and PR
For PO : M_BEST_LGO for palnt/Storage location
For PR : M_BANF_LGO for palnt/Storage location

Error states ''Putaway in storage section SSA is not allowed''.

Edited by: Sunny on Sep 11, 2008 10:26 AM

Hi
You need to check that you have the correct strategies set up for storage sections and for storage bins and for storage unit types that they are allowed to go where you are trying to put them
Frenchy

Storage section indicator functionality

Hi All,
Generally we are using Storage section search for WM in SAP.Previously by using this we restricting some goods movements to particular storage sections.But now this storage section search indicator functionality is not working .I have checked all configuration for storage section search .Everything seems to be correct but this functionality not working .
example: storage section indicator 001 should only be linked to storage section A, but it is also possible to put away in storage section B ?? We have only added section A to 001.
Can you please advice me what configuration settings needed to revert back the settings.
Thanks & Regards,
Srikanth P.

Hi
Check wther the storage section check active indicator is set at storage type level.
Storage section is used to further divide the storage type. It will be used only for Putaway process.
Check the following also
Storage section definiition for the wh no/storagetype combination
Storage typw indicator to the wh no
Material master storage section indicator
Storage bins created with the storage section
Hope it helps
Thanks/karthik

WM- Wrongly triggered storage section in 902 storage type

hi
   I maintained the storage section( B11) in 902/ WE-ZONE . When i generated the GRN against purchase order ,
   during transfer syatem storage type 902 is triggering the storage section 001.. i dont want system trigger the storage
   section 001 for storage type 902..the system should generate the 902 for storage section(B11)
With Regards
Dinesh
Edited by: code acess on Dec 29, 2011 5:22 AM

Hi,
This is a std system behaviour, since the configuration is done like this in SPRO.Please check for the settings against storage type 902.
spro->Logistics execution->WM->Master data-->Define storage type -
>Define stsorage section
The system picks the section from here
Regards,
Velu

Authorization on Storage Section

Similar Messages

Maybe you are looking for